Default file extension return back after modification

Similar Questions

• default file extension

  Under replace/create/open file detailed help, it says that I can make the dialog box display a default file name or extension.  How could I go about this?  I want the dialog box to display only a specific file type.

  Thank you.

  Just use the 'file' dialog box and wire of the output in your "open/create/replace.

• Selection of Vista Explorer by default file extension: this can be changed?

  By default, in the Vista Explorer, when you select a file name, the file extension is excluded. This behavior can be changed?

  Thank you.

  François

  To see file extensions, go to start / Control Panel / folder options / view and presented the box Hide extensions of known file types.  This way you will always be able to see the file extensions.  I have no idea why that is enabled by default because it is very useful and I would even say that it is important.

  If you have disabled (or if it's on, incidentally) and you rename a file without the extension, it will lose the file extension and won't open because he doesn't know what kind of file it is.  It's yet another reason for the extensions of files to all files are displayed permanently.  You do not want the name of the excluded file because this would mean that you could not change the types of files because the extension is "locked".  As long as you can see and change, there should be no problem.

  When you select a file name in the file extension Explorer is excluded only if it is hidden.  Otherwise you can see.  In any case it's there even if you don't see it (unless you have changed the name and does not include the extension in the new name).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• set the default file extension

  I have a button "save under" in my front panel and when I press this button a dialogue apears asking me a path for savaing a file in a format "xls". In this case every time I press the button "save under" I have to type the file name extension ".xls" as well as the file name.

  Now, how can I pre-define '.xls' as value format by default when I press the button "save under" it usually then need to type the extension (.xls) too?

  V. S

  Like this

  

• I chose to open files by default .exe for internet explore. Now I can't open microsoft word2007, Notepad, mozilla, chrome, etc etc as iexplorer opens when I click on any program. How to return back?

  I chose to open files by default .exe for internet explore. Now, I can't open chrome, mozilla, Notepad, microsoft, etc., etc. like iexplorer opens when I click on any program. How to return back?

  I tried this solution

  "When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program."

  microsoft community.
  The problem I encounter is that I can't even open Notepad or command prompt window window download internet explore opens and I'm stuck there. Please help me get out of this quagmire.

  Hi Wiillam,

  This problem occurs because the icon cache is not updated correctly.

  Refer to:

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  (http://windows.microsoft.com/en-US/windows7/Back-up-the-registry ) How to back up and restore the registry in Windows.

  Icons change incorrectly in Windows

• So how can file formatting when installing printer, I return back to their original state.

  Original title: FILE FORMAT CHANGED AUTOMATICALLY AFTER the INSTALLATION of NEW SOFTWARE PRINTER HOW can I RETURN FORMAT ORIGINAL to RECORDS

  I just installed a brother p touch on my computer printer software and now all my folders automatically changed their format to account for the printer. who is a printer for adhesive labels. How can I get all my files back to their original format? I can do each an indivicually, but then, after closing the computer and re opening they come back to the new format of the thumbnail

  Thank you

  but finally managed to solve the problem

  tried to click on all the printers iconc

  except the one on the bar at the bottom of the screen

  from there I could change the default settng for printe

  new sticker fron brother printer

  to the old normal printer

  strange I couldn't do otherwise

• I'm trying to import and backup/restore/Choose file... / after backup correctly and I see the file, but there is no JSON extension. What can I do?

  I'm trying to import and backup/restore/Choose file... / after backup correctly and I see the file, but there is no JSON extension. What can I do?

  I backed up my favorites using 'import and backup/Backup' on an external HD, installed Windows 10 and went to restore my bookmarks and noticed the file named "Firefox bookmarks-2015-09-04"had no extension and does not work."

  Please advise! Thank you! Sincerely, s

  If you add the .json extension, it works then? Why people who design browsers or extensions them do create files with no extension name, in spite that these extension names are essential to make the files can be restored? I could never understand that.

• I tried to write a script, the user can use. This return number file *.tiff associations back using the image viewer is caused each month.

  Original title: automation of file tiff without elevated rights association

  I tried to write a script, the user can use. This return number file *.tiff associations back using the image viewer is caused each month.

  Hi, Unclemarcus2002,

  You would be wiser to post on the Forum TechNet where there is COMPUTER experts.

  http://social.technet.Microsoft.com/forums/en-us/newThread

  Maybe using the ASSOC and FTYPE command in a script will do what you want? I think that these orders would also apply the association throughout the world, rather than on a per-user basis.

  ASSOC: http:

  FTPYE: http:

  Here is an example, that you can try.

  Let's say you have a text file called "foo.bar" and you want the extension .bar always open with Notepad. There is an association for text files, so get him by typing "Ftype | more' at the command prompt (it will make a major announcement). Finally, you'll see the line "txtfile". On mine, it's "txtfile=%systemroot%\system32\notepad.exe %1" without the quotes.

  First create your association: assoc .bar = FooBarText

  Now to assign your request to your file type association: ftype FooBarText=%systemroot%\system32\notepad.exe %1

  You should now be able to double-click the foo.bar file and it will automatically open in Notepad.

  If you already have a Microsoft Office Document Imaging association, I think that it should be relatively simple type of substitution. Use ftype /? for a little more help.

  http://community.Spiceworks.com/topic/119639-Windows-7-automate-file-assocations

• file extensions appears no not after a reinstallation of Vista HP

  After a computer crash I had to reinstall Vista HP, but now my file extensions are not displayed when you navigate to a folder

  Hello Elowan74,

  As you revenue to conditions in the factory by reinstalling Windows was disabled file extension option. This option is disabled by default. If you need it, you need to turn on yourself.

  1. click the Start button, click the control panel option.

  2. in Control Panel, click the folder option.

  3. in the window of the folder, click the view tab.

  4. in the view tab, scroll to the bottom of the list of options until you get to the section marked 'hidden files and folders '.

  5. search for the option "Hide extensions of the types of files known." marked

  6. remove the check mark (tick) in the box to the left of this option.

  7. click on OK

  8. your file extensions should now be visible.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• After saving the emails from windows live mail, why not open them on my computer as the file extension is wlmail.fol?

  After saving the emails from windows live mail, why not open them on my computer as the file extension is wlmail.fol?

  wlmail.fol is a tiny text giving the name of the folder. The exported messages will have filenames like 00D13E83 - 000025DF.eml. If you don't see all of the files like this, your export probably did not work properly.

  For a successful export, follow these directions:

  1. Set Windows Live Mail to work offline before starting.
  2. Create a temporary folder on your desktop * to contain the exported messages.
  3. In the Export Wizard, select the temporary folder, and then select all the folders.* *
  4. When it is complete, check that the number of files in each folder to the temporary folder is one more than the number of messages in the corresponding folder of WLMail.
  5. Copy the temporary file to its final destination.
     If you use a reader not NTFS to do this, you will see a warning that certain file properties will not be copied files. This can be ignored.

  * Windows Live Mail do not work with files that are not on a local drive, as opposed to an external or network drive. This is avoided by using the office as a temporary folder location. 
  * If you want to export the files sampled only, select each of them containing messages. Subfolders are not automatically selected by default.

• I'm unable to change default file associations. The association always returns to what it was.

  I am running Windows 7 64 bit.  I can't change the file associations default for .exe and .ini files (I have not tried the other file extensions).  I tried to make the change by choosing "open with", select the desired program and checking the 'always use the selected program to open this type of file.  I also tried with the option "Default Programs/Set Associations" in the control panel.  No matter what I do, the association returns to what it was before (the Notepad in the case of .txt and .ini files)
  Any suggestions are appreciated.

  Thanks for your suggestion.  I tried Microsoft FixIt, but that did not help.  Then I remembered that I had installed and uninstalled a trial version of UltraEdit v. 18 on my computer.  This program partners with a variety of file types.  I reinstalled the trial version, making sure that it has been configured to not to associate any type of file and then uninstalled again.  Now everything works fine.

• Problems with after the batch renaming file extensions

  After batch renaming I cannot open in a photo shop, jpg seems to have. Photos will only open in Photo Viewer. How can I get them back to jpg?

  batch rename your jpeg files so they all have a jpg file extension.

• Cancel the default program to open a specific file extension

  Trying to open an attachment with the file extention .zmc I accidentally agrees to always open this type of file with adobe reader.  Do work, but I can not cancel the default, only change and I don't know what to take.  Any ideas?

  http://www.ehow.com/facts_5748618_file-extension-zmc_.html

  «Files with the ZMC (.zmc) are files of ZoneAlarm Mailsafe.» ZMC files are used exclusively by the family of ZoneAlarm firewall programs. ZoneAlarm, a security program that protects your computer from hackers, malware, theft of identity and other dangers. ZMC files are of various types that have been renamed with the extension ".zmc" until they are quarantined so that they cannot be accidentally opened. "

  He tells you he how to open, too: "rename the file with its extension of origin (.exe, .pdf, .jpg, etc.) and open it normally."

  http://www.google.com.au/search?hl=en&source=HP&q=.ZMC+file+ext&aq=f&aqi=G1&AQL=&OQ=&gs_rfai=

  More info on above Google hits.

  How to set file Associations:

  http://articles.TechRepublic.com.com/5100-10878_11-6172036.html

  How do I... Change file extension associations in Windows Vista?

  See you soon.

  Mick Murphy - Microsoft partner

• Why can't I change the action of double-tap by default for a file extension?

  With Windows XP, it was possible to change the default action for a file 'type' (IE file extension, because Windows 7 has no notion of a file "type" Despite other operating systems supporting these things for the last 20 years).

  Why is it not possible under Windows 7?

  Because it was designed by a guy named 'Me', which obviously has not used a computer or visited planet Earth recently, if ever?

  Why are all the MS support dumb people on this issue?

  Because they would have to admit they lied to their customers when they said Windows 7 was better than XP?

  Its opening called with, no?

  No, it isn't. This isn't what he's talking about.

  Freqy: Try this:

  http://Icrontic.com/Forum/showthread.php?t=85241

  Alternatively, you can try this freeware:

  http://www.NirSoft.NET/utils/file_types_manager.html

• After the effects of automation Script - color key formats WMV Files and return automatically?

  Hello

  I'm pretty new in the Adobe After Effects automation script, but I was wondering if it is possible to open multiple WMV files (each file has the same background color) and use an automated script to apply the same effects of parameters of color key for all the files and then automatically rendered all the files as FLV, RGB + Alpha and select the audio Bitrate 96.

  Any help would be appreciated. Thank you.

  I have in fact you have a waste of time and managed to put it together. There are a lot of comments to help explain what does what. You will need to change a few things for your use.

  Line 9 # will need the path to your preset file.

  Line 12 # will have the name of your preset OutputModule. It is case sensitive.

  Line 31 # can be changed if you want that different file extensions. Right now he's looking for more specifically '.wmv' or '. '. WMV channels"in the name of the file.

  {
    /*Choose a folder with WMV files*/
    var chooseFolder = Folder.selectDialog("Choose folder.");
  
    /*Choose render to folder*/
    var chooseRenderFolder = Folder.selectDialog("Choose folder to render to.");
  
    /*Set your animation preset name here*/
    var nameOfColorKeyPreset = File("/Users/gtm_osprey/Documents/Adobe/After Effects CC 2014/User Presets/MyColorKeyPreset.ffx");
  
    /*Set your Output Module preset name here*/
    var nameOfOutputModulePreset = "MyFLVOMPreset";
  
    slash = ($.os.toString().indexOf("Windows") == (-1)) ? "/" : "\\"; /*Determines the slash format for files paths*/
  
    /*Gather process into an undo group*/
    app.beginUndoGroup("ImportKeyThenRender");
    /*Validate folder object*/
    if(chooseFolder != null && chooseRenderFolder != null){
    /*Get files from folder*/
    var files = chooseFolder.getFiles();
    var filesLen = files.length;
    /*Declare variables*/
    var io, curFile, asset, myFiles;
    /*Create an AE folder for files*/
    var myWMVFiles = app.project.items.addFolder("WMVFiles");
    /*Loop through files and import them*/
    for(var f=0; f