Default gateway will not save on any network adapter

Similar Questions

• Default gateway will not save

  Hello

  My riding school just bought a printer LaserJet 500 color M551.  I set up the IP port on our print server and manually entered the IP of the printer settings.  This includes the IP address, subnet mask and default gateway.  However, the default gateway changes itself to the same thing as what I entered IP address as soon as I leave the JetDirect menu on the printer.

  After that, I tried to change through the web browser interface.  So I changed to get a DHCP IP address and browsed to the printer and changed from the manaul IP browser.  After I clicked on save, I could navigate is more to the printer based on the IP address I have affected it.  I went into the menu of the printer to the printer itself and found that the default gateway changes itself again to the IP I assigned to the printer.

  For this reason, the printer is essentially useless, because anyone on the network can be printed on it.  Has anyone about this before?  Is it an easy setting I'm missing?  I am a network administrator and have implemented dozens of printers before and have never encountered this before.  Any input would be appreciated.

  Just an update for anyone who looks at this: when I print configuration, under the IPv4 settings page, it shows an error message indicating the INVALID GATEWAY ADDRESS.  Lower than that, it shows the IP address of the default gateway that I have tried to enter.  It shows then below the IP address of the printer, the subnet mask and the default gateway (it changed to be the same as the IP address).  Here is the subnet and the gateway that I use:

  255.255.0.0

  10.1.1.1

  After seeing this message, I tried to change the subnet mask of 255.0.0.0, and I received is no longer the error message.  However, because I changed the subnet mask, it is not on the same network that the rest of our network, is still essentially useless.  But when I change the settings of DHCP TCP/IP instead of manual, it pulls the subnet mask and the gateway that I entered in the first place (when I get the message to the INVALID GATEWAY ADDRESS).

  I called HP support and they had me erase the disc and reload the firmware, and when she came back to the top the same problems happened.  Its almost as if the printer (or the JetDirect card) is too smart for his own good and does not allow a combination of gateway and the subnet mask that is not a normal combination.  Any ideas out there?

• Firefox will not save my passwords for all sites, I checked the options, securtit and marked the box to save passwords. Any suggestions?

  Firefox will not save my passwords for any site. I checked the box 'Save password'. I tried several times over several days.

  Any suggestions?

  Under the Privacy tab, check box "remember history". My sister had the same problem, and this box is unchecked in its version. Please try it out.

• My internet rpet 'unidentified network' + "the default gateway is not available"...

  My internet was working fine before, but now repeat me 'unidentified network' and I know that's not my internet because I have another laptop that uses the internet itself very well. Then when I try to solve problems, he said "the default gateway is not available"... of the suggestions?

  Hello

  ·         Did you do last changes made on your computer before the show?

  ·         Using internet connection wired or wireless?

  Method 1:

  Follow the steps in troubleshooting from the link and check if that helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Temporarily disable the firewall on your computer and check if it makes a difference.

  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Note: Makes sure to turn Windows Firewall back, once you have done the troubleshooting.

  Method 3:

  Reset WINSOCK, TCP/IP IPv4 and IPv6 TCP/IP stack.
  a. Click Start and in the search box, type cmd.
  b. right click on command prompt, select "Run as Administrator" to open a command prompt.
  c. at the command prompt, type the following commands:
  netsh winsock reset catalog which resets the WINSOCK entries to the default installation.
  netsh int ipv4 reset reset.log that resets the stack TCP/IP IPv4 default installation.
  netsh int ipv6 reset reset.log resets the default install IPv6 TCP/IP stack.
  d. restart the computer.

  Also, see this KB article:

  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Kind regards

• Losing Internet connection because of the default gateway is not available.

  I keep losing internet connection and when I run the troubleshooter, it comes up saying "the default gateway is not available". I have an HP with Intel dv6985se. I was advised to do the following:
  I had the same problems of chance which I fixed it by simple disabling 'SLEEP ON DISCONNECT' SideScalng disconnect

  1 Access Device Manager (Control Panel > system and security > system > Device Manager)
  2. expand the network adapters
  3. Select the adapter that you are using (if more than 1 Repeat step 4 to 8 for each adapter)
  4. right click and select Properties
  5 click Advanced
  6. If you have installed Nvidia Ethernet configuration click the button
  7. scroll to the bottom of the list and disable the device sleep on disconnection and receive Side Scaling
  8. save the settings

  I appreciate this help info but none of this applies to my computer has. In my device under 'Network adapters' Manager, I do not have Nvidia, Asus and AMD, which is listed under my network cards is "Intel Wireless WiFi Link 4965AGN" and "Realtek RTL8101E Family PCI - E Fast Ethernet NIC (NDIS 6.20)".

  The help that I've provided says disabling "Sleep on Disconnect" and "Receive Side Scaling"... or those who are in one of my "adapter properties tab advanced options" for both my Intel and Realtek... no where does say anything about sleep on disconnect or side scaling.

  I was online with HP cat many times and Ive tried the options they have provided that is basically what I've found here but nothing has worked so far! My computer is 1 1/2 old and is preinstalled with Vista 64-bit. Recently, I have completely restored my computer with Windows 7 64 bit, and ever since then, I can't download anything or talk to HP or any kind of help because I lose the connection. Could someone please help me solve this problem... to be frank and honest he pisses me off beyond words that I never had this problem when I'm on Vista!

  I don't know what else I can provide to better help me to solve this problem, but if anyone would like more information on what programs etc, my computer has let me know and I will provide the information. Below, I'm pasting the info I received through my history of troubleshooting like a Notepad of paper Network Diagnostic and Route.Print document.

  Windows IP configuration

  Name of the host...: Helvis-PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: Belkin

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. : Belkin
  ... Description: Intel (r) Wireless WiFi Link 4965AGN
  Physical address.... : 00-1F-3B-A2-B7-6B
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::58d1:7968:4f2e:e873% 12 (Preferred)
  IPv4 address: 192.168.2.3 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: Wednesday, 10 March 2010 19:03:56
  End of the lease...: Sunday, April 17, 2146 01:58:36
  ... Default gateway. : 192.168.2.1.
  DHCP server...: 192.168.2.1.
  DHCPv6 IOOKING...: 218111803
  DHCPv6 DUID customer...: 00-01-00-01-13-1C-37-DE-00-1E-68-7F-D5-C3
  DNS servers...: 192.168.2.1.
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  Description...: Realtek RTL8101E Family PCI - E Fast Ethernet NIC (NDIS 6.20)
  Physical address.... : 00-1E-68-7F-D5-C3
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. Belkin:

  The connection-specific DNS suffix. : Belkin
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::5efe:192.168.2.3%14(Preferred)
  ... Default gateway. :
  DNS servers...: 192.168.2.1.
  NetBIOS over TCP/IP...: disabled

  Tunnel adapter isatap. {BC831AD2-8EB9-45C9-9FB7-D2CF0E447380}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:4137:9e76:451:18e9:3f57:fdfc (Preferred)
  Address IPv6 local link...: fe80::451:18e9:3f57:fdfc % 13 (Preferred)
  ... Default gateway. : ::
  NetBIOS over TCP/IP...: disabled

  Print route Notepad document:

  ===========================================================================
  List of the interface
  12.. 00 1f a2 b7 6B 3B... Intel (r) Wireless WiFi Link 4965AGN
  11... 1e 00 7f 68 c3 d5... RealTek RTL8101E Family PCI - E Fast Ethernet NIC (NDIS 6.20)
  1... software Loopback Interface 1
  14.. 00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter
  15 00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2
  13 00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface
  ===========================================================================

  IPv4 routing table
  ===========================================================================
  Active routes:
  Network Destination gateway metric Interface subnet mask
  0.0.0.0 0.0.0.0 192.168.2.1 192.168.2.3 25
  127.0.0.0 255.0.0.0 127.0.0.1 on route 306
  127.0.0.1 255.255.255.255 127.0.0.1 on route 306
  127.255.255.255 255.255.255.255 on-link 127.0.0.1 306
  192.168.2.0 255.255.255.0 on binding 192.168.2.3 281
  192.168.2.3 255.255.255.255 on binding 192.168.2.3 281
  192.168.2.255 255.255.255.255 on binding 192.168.2.3 281
  224.0.0.0 240.0.0.0 on-link 127.0.0.1 306
  224.0.0.0 240.0.0.0 on binding 192.168.2.3 281
  255.255.255.255 255.255.255.255 on-link 127.0.0.1 306
  255.255.255.255 255.255.255.255 on binding 192.168.2.3 281
  ===========================================================================
  Persistent routes:
  None

  IPv6 routing table
  ===========================================================================
  Active routes:
  If metric network Destination Gateway
  13 58: / 0 sur-lien
  1 306: 1/128 liaison
  13 58 2001: / 32 on a link
  2001:0:4137:9e76:451:18e9:3f57:fdfc 13 306 / 128
  Over a link
  12 281 fe80: / 64 On-link
  13 306 fe80: / 64 On-link
  FE80::5EFE:192.168.2.3/128 14 281
  Over a link
  FE80::451:18e9:3f57:fdfc 13 306 / 128
  Over a link
  FE80::58d1:7968:4f2e:e873 12 281 / 128
  Over a link
  1 306 ff00: / 8 On-link
  13 306 ff00: / 8 On-link
  12 281 ff00: / 8 On-link
  ===========================================================================
  Persistent routes:
  None

  Helvis,

  If the error does not recur in safe mode then there is probably a startup item or service causes the error. Follow the steps on the following link to locate the item or service responsible for the error:

  http://support.Microsoft.com/kb/929135

  Hope that helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Recurring "the default gateway is not available.

  At random times throughout the day, I get a "default gateway is not available", and after you run the troubleshooter, it solves the problem, but then later in the day, it happens again. Why/how does this happen?

  Hello

  Thank you for give Forums Community Microsoft the opportunity to help you with your concern for Windows.

  According to the description, it seems that you are having problems with error default gateway is unavailable.

  I need to ask you some questions to help you better.

  1. which browser is installed on the computer?

  2. were there any changes (hardware or software) to the computer before the show?

  We will try these steps and check:

  Method 1: assign the IP address and gateway manually, follow these steps:

  has. in the system tray, right-click right network icon. Choose Open network and sharing Center.

  b. right click on Local area connection and click Properties.

  c. Double click Protocol Internet Version 4 (TCP/IPv4) and assign the IP address manually.
  Example: Old Ip address is 192.168.0.1
  Replace the IP 192.168.0.50

  d. let the subnet mask and default gateway are the same.
  Subnet mask = 255.255.255.0
  Gateway by default, would usually 192.168.0.1 or 192.168.1.1

  e. click apply and Ok and restart the computer and check if it helps to solve the problem.

  Method 2: Perform the steps in the link and check.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Answer to us if you are having problems with the network or any other problem of Windows, and I'd be happy to help you.

• A default gateway is not available: Wi-wired connections and has stopped working on my PC

  Hi all.

  Connections Wi-wired and on my PC have stopped working all of a sudden. I tried to restore my system to an older image, and he began to work for a while. He then stopped working again after a few hours, when I apply my updates of windows and other restorations (to the same restore point) didn't help. Troubleshooting, says that the default gateway is not available.  I already tried to renew that my ip and disable firewall and they do not seem to help. I am also unable to ping my default gateway. It is not a problem with the ISP, since I am able to connect using my laptop.
  I use an edge of dell wireless network adapter and use a realtek network card.
  Any help / pointers in the resolution of this matter will be highly appreciated.
  -ONE

  Ok. So, I finally found the real culprit. It was an update of McAfee, which cut the Internet. I ended up uninstalling McAfee and re - install the latest version. Found the solution through this post:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-7-cannot-connect-to-the-Internet/7ee7b350-3937-4b7a-bbc5-786b2333f4b2
  http://service.McAfee.com/FAQDocument.aspx?ID=TS101446

• Windows Photo Gallery will not save the edited images

  Windows Photo Gallery will not save the edited images. the files are not read-only; older files can be modified; the most recent files cannot

  Message says photo library was beset with problems and the modified file cannot be saved

  Windows Photo Gallery will not save the edited images. the files are not read-only; older files can be modified; the most recent files cannot

  Message says photo library was beset with problems and the modified file cannot be saved

  ================================================
  Windows Photo Gallery... Cannot save modified photos...

  No guarantees and proceed at your own risk!

  Good luck...

  --

  (1) try to do a system restore to an hour before
  the problem started.

  With the help of the Windows Vista system restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  --

  (2) I've seen reports that this problem may be related
  Kodak Easy Share software. Installation "Kodak
  Single-action Version 8 for Windows from the
  the following link may be the solution.

  Kodak Easy Share 8 software version
  http://www.kodak.com/eknec/PageQuerier.jhtml?PQ-path=130&PQ-locale=en_US&_requestid=5320
  (FWIW, it's a good idea to create a system)
  restore point before installing software or updates)

  --

  (3) I saw reports that could clarify the next steps
  until the question...

  Right click the library icon and choose
  "Run as Administrator"

  --

  (4) I copied the info from a tech forum on
  the net... I don't know if it works, but maybe it's
  worth a try:

  A. right click on Task Manager open the
  taskbar on the bottom of your screen and choosing
  The task in the menu Manager.

  B. click the tab process, along the upper part of the
  The Task Manager screen.

  C. in the process tab, select the corresponding button at the bottom
  left of the screen that says "show processes of.
  all users"and click on it. Click 'Continue' to the UAC
  the prompt that appears.

  D. the screen should turns off a moment, then
  back with much more than process listed. Click
  the "Command line" column to sort the list and
  Search:

  "C:\Program Files\Windows Media Player\wmpnetwk.exe"

  Read the description in the next section on:

  Windows Media Sharing Service reader network

  F. click on this process. Click the end «»
  Treat button"at the bottom right of the screen.
  Confirm 'End process' if necessary.

  You should now be able to save your changes to
  your photos normally. The bad news is that this
  should be performed whenever you start or restart Vista.
  And I don't know how to prevent the situation from
  in the first place of loading.

  --

  5) posted by: artologik
  The solution came to me when I could not recreate
  the problem on a laptop with Vista Home.
  Everything I could compare, I noticed that the
  %Path% environment variable was not between different
  the 2 machines.

  I guess that WLPG relies on the dll must be found
  on the way to the system; When not found, it must return
  Back to ' base or incomplete "library finds it
  the default specific paths or the user. The solution for
  me has been to ensure the entire path system
  to the folders in the order appropriate.

  To fix, follow these steps:

  A. right click on the COMPUTER icon on the
  desktop and choose PROPERTIES

  B. choose ADVANCED SYSTEM SETTINGS

  C. Si you are prompted by UAC to allow, go ahead.
  and ALLOW

  D. click on ENVIRONMENT VARIABLES...

  E. in the bottom half, under SYSTEM VARIABLES,.
  Find the PATH variable and highlight the

  F. click the button CHANGE

  G. ensure that what starts with
  % SystemRoot%\system32;%SystemRoot%;

  H. ensure you that a semicolon separates each entry.

  I. click OK three times

  J. restart the computer

  Good luck...

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• a default gateway is not available in windows 7

  G ' Day,.

  Although Windows 7 works and looks good, there is a major problem which threatens to derail the whole experience for me.

  Several times a day, the default gateway becomes unavailable, which means that the PC running Windows 7 loses internet connectivity. At the same time, other PC, running Vista, continue to operate normally. It is a PC with a WiFi connection and another that is normally connected.

  Here are the details of my network controllers (are there two).

  ... Description: NVIDIA nForce Networking Controller
  Reference of the manufacturer.... : NVIDIA
  Provider of...: Microsoft
  Version...: 1.0.1.211
  INF file name... . : C:\Windows\INF\netnvm32.inf
  Date of the INF.... April 22, 2009 12:47:44 AM
  Name of the section.... : NVENET55. NDI
  Hardware... ID: pci\ven_10de & dev_0373
  Instance... state flags: 0x180200a
  Status code of Device Manager. . : 0
  IfType  . . . . . . . . . . . . : 6
  Type of physical support...: 14

  The problem is solved by manually fix the problem when Windows 7 detects that the default gateway is not available to the general public and resets the network 2 controller.

  I saw that this isn't an isolated fact with several reports on the net, some suggesting that a different driver may help, but which? Any suggestions?

  It is one of many known issues nVidia Windows 7 nVidia should fix, unfortuniately Microsoft has nothing to do with it. I'm sugguest that you contact nVidia for assistance. Jonathan Matthis aka "7test" on MSN QnA
  Chief Administrator of the Site
  Windows 7 QnA
  http://Windows 7qna.ning.com

• Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another progr

  Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another program.

  Hi rkusa1,

  Thank you for using Microsoft Windows forum

  QuickBooks worked very well under Vista? It should also work reliably on Windows 7.

  However, you may want to follow these steps.

  1. right click on your quickbooks start exe file and open properties.

  2. on the Compatibility tab, select the compatibility mode and run this program in compatibility mode for Windows using the following link: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows (only if she worked very well with former Windows operating system)

  3. the control privilege level "Run this program as Administrator". Press apply/OK to close properties.

  4. start - devices and printers - add a printer - add a local printer - create a new port - local port and name it QBD_PDF.

  5. Choose install AMYUNI Technologies - Amyuni Document Converter 300 (click the button update windows if it is not on your list).

  6. If windows detects you already have a driver and then choose to replace the current driver. The printer name Quickbooks PDF Converter - do not share the printer - NOT set as the default printer. Finishing

  7. start right click - devices and printers - printer QB, choose printer - properties and go to the Advanced tab.

  8. remove the checkmarks in the 4 elements with square next to them (lower part of the screen) boxes, and then select "Print directly to the printer" press OK to close the window.

  9 restart you computer and open Quickbooks. Open the file - printer installation and make sure of Quickbooks PDF Converter is selected for any operation PDF printer that you use frequently. (on rare occasions, you will see not of Quickbooks PDF Converter on the list, reboot again and you'll get it).

  You can now perform operations of PDF in Quickbooks (works for 32 and 64-bit Windows 7)

  For a similar question, see: http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/2bd30024-0a64-4f6b-a831-8cb7c1e4cce5

  If the steps above do not post your question in this link: http://community.intuit.com/quickbooks

  Kind regards
  Aziz Nadeem - Microsoft Support

• WiFi access limited, error: "the default gateway is not available.

  I just bought a laptop Windows 8 last December. It had been repaired twice (change the motherboard). He works all fine until last week, wifi connectivity started showing limited access. Furthermore, my IPV6 shows no access. I tried many solutions to many websites, but all will not work. Is there another way? When I trobleshoot the problem, it will show wifi Internet but when I run Google Chrome, it displays an error of internet connection. After I trobleshoot, the stated problem is "the default gateway is not available. In addition, he recovers in about 5 minutes after trobleshooting access. I need a solution as soon as possible. URGENT!  In addition, may I know what caused this do? I hope some of you can help. :(

  Dell Inspiron 7420, unique language of Windows 8

  Hi Amos,.

  I understand that your WiFi connection fails.
  According to the guidelines of the error (the default gateway is not available), there is a problem with the gateway IP address that does not connect to the internet.

  I would be grateful if you could answer the following questions:

  1. did you of recent changes made to your computer (installation of updates, device drivers)?

  2. which antivirus app do you use?

  What are the troubleshooting steps you have tried?

  Here are a few troubleshooting steps that you can try to solve this problem.

   

  Method 1: Manually assign the IP address and the default gateway and check if it works very well. Before you assign manually the IP address and the gateway by default, do
  a note of the IP address of the computer. To do this open command prompt, type ipconfig and press to enter. This displays the IP address, make a note of it.

  To manually assign the IP address and default gateway, follow these steps:
  a. in the system, right click on network icon tray. Choose the open network and sharing.

  b. click on change adapter settings

  c. right-click on the card's wireless connection and click on properties.

  d. Double click on Internet Version 4 (TCP/IPv4) Protocol and assign the IP address manually.
  Example: Old Ip address is 192.168.0.1
  Replace the IP 192.168.0.50
  e. leave the subnet mask and default gateway are the same.
  Subnet mask = 255.255.255.0
  Gateway by default, would usually 192.168.0.1 or 192.168.1.1
  f. click apply then click Ok and restart the computer and check if it helps to solve the problem.

  If the method above does not work, proceed to the next method.

  Method 2: I suggest you try the steps from the link given below:
  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  
  

  If you have additional problems, please reply to this post and we will be happy to help you further.

• currently not connected to any network

  I have a HP Omni 100-5050 all in one office. Windodws 7

  Recently, it does not connect to the internet, and I get the message "no connection available.

  When I go to network and sharing Center, I get the message "currently not connected to any network.

  Until a few days before, everything was fine.  The only thing that may have changed, was an automatic

  update windows.

  I called HP support, and they offer a fix for a price.  Is this the only option I have?

  Help!

  PS My laptop is connected to the same network and works fine

  Thank you for the additional information.

  I am not sure, but I don't think that there is a wireless switch on the keyboard there is on most laptops.  This is considered as a desktop computer.

  Have you updated the driver wireless?  This may solve your problem.

  As a last resort, you may need to perform a system recovery.  This will take the computer to its original configuration.  You should back up your personal data if you decide to go this route.  I do this at least once a year.  He always makes the computer run better.

• Computer will not print wireless or network

  original title: my computer is anti-social

  It will not print wireless or network with other computers in the House.  any advice?

  Hello

  1. what version of Windows is installed on the computer?

  2. were you able to print earlier?

  3. are you able to print via a wired connection?

  4. What is the brand and model of your printer?

  5. are you aware of any changes made to the computer, before the show?

  Method 1:

  Temporarily disable your antivirus software, and then print.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Runs the computer without antivirus software or firewall is a potential threat to the computer; don't forget to activate the security software after completing the troubleshooting steps and after you have identified the problem.

  Method 2:

  Check out the following link.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  I hope this helps.

• Using Vista, WiFi will not automatically connect after that reboot - config "connect automatically" will not save after reboot.

  Using my Lenovo with Vista laptop, the wireless re-does not after I stop/restart.

  I checked the "connect automatically when this network is in range" parameter in the configuration Wifi, but the box always becomes disabled after that I reload.  Why this configuration will not save after that I reload?

  How did your problem related to Windows Update?

  Post here instead, please: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Settings of the mouse from Logitech G5 will not save.

  I have Win 7 Prof X 64. I worked with Logitech support now for almost 3 months on why my setting of the G5 mouse will not save after a reboot. They had load me 5 different versions of the set point and to make all systems that they thought the change. They even sent me a new mouse G500, which has the same problem. After a reboot, I have to open the set point and close it, make no changes, and all my settings to start working. Set point is in my Start menu & KHALMNPR file is set to no load.

  I have loaded the same software on my laptop, Win 7 Home Premium, and it works fine. It tells me that there must be a setting in Windows 7. Anyone have any ideas? Thank you

  Hello
  
  You are able to save the setting for another application or a program?
  Step 1: Try changing the setting in safe mode, and then restart your computer in safe mode again to check if the setting is saved.
  If the settings are saved in safe mode, then try to perform the clean boot.
  
  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
  http://support.Microsoft.com/kb/929135
  Step 2: You can try to create a new user account and check if the problem persists there.
  Create a user account
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
   
  If it works in a new user account, then you will need to fix the corrupted user profile. You can visit this link for the steps:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
   
  Step 3: You can also check if the problem persists on the other computer and send back the same.

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]