Define a VI to run when starting on the myRIO when programmed in scan mode

Salvation of the forums,

Hoping you can help me with this please. Of course there must be a simple way for me to do, but can't seem to find anything through research on the main site of NOR...

I work with the platform myRIO and simply want a VI to run as soon as the myRIO is powered (no instruction of the user interface). I found the instructions on How to do it if the myRIO has been programmed using the FPGA and the host RT configuration but unfortunately the right click options are not available because my project/myRIO are set up using the analytical engine style mode (giving access to the range of myRIO etc.).

Ideally I'd rather avoid having to recode the system using a low level of coding, including FPGA due the heavy compilation for each iteration of the code using real data (with simulated test on PC e/s would be faster, I know, but it is unlikely to show me bugs in my code for what I need).

So in simple, could someone please point me in the right direction for setting a VI to run at start up/boot for the myRIO when it is configured and programmed using the scan engine?

Thank you very much!

It turns out, after all this (several hours trying to find missing options and research methods of how do!) this is because the Application Builder had been installed and as such has been activated, but NI License Manager was always waiting to finalize activation (activation running Assistant required).

Seems to work now but at least! No doubt lost a lot of time with her, but it's a learning curve!

So for someone who is struggling to find options to create a .rtexe file, make sure that your Builder Application is enabled!

Tags: NI Products

Similar Questions

  • The desktop icons are not open with a double or click context - programs can still start through the list of programs.

    Original title : Double click on icon it does not open and when I right click it Office of the menu drop-down does not appear.

    Programs can always be started through the list of programs.

    Hello

    ·         Were there recent changes made on the computer before the show?

    ·         You are able to add a shortcut on the desktop?

    I suggest you run this Microsoft Fixit tool and check if it helps.

    Difficulty of broken desktop shortcuts and common system maintenance tasks

    http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  • can I uninstall microsoft "click-to-run" and leave unscathed the other microsoft programs?

    Can I uninstall Microsoft Click-to-run without harming the other Microsoft programs installed?

    Click Microsoft to run is required for office starter, a version of office included by your PC manufacturer.  I'd go alone or you may break the Office

  • Command to run and start playing the project?

    For some plugin development tasks, it would be useful if there is a command to load and launch a 100% zoom immediately on AE project commissioning. I was able to get AE to load my project passing as the first command line argument. Is there a way to start to play immediately?

    Shachar is right, you will need to use scripts for this.  Here's what I did to the command-line on Windows:

    C:\Program Files\Adobe\Adobe After Effects CS5.5\Support Files > AfterFX s ' var MyFile = new file (was: \\Test Files\\Projects\\AEP\\5.5.aep'); App.Open (my_file); app.executeCommand (2285); app.exitAfterLaunchAndEval = false; »

    2285 is the command ID of preview RAM, the documentation for the SDK Guide for AEGP_DoCommand().

  • How to set an application built using the C API for myRIO 3.0 to run when starting on a myRIO-1900

    It is even possible to define such an application to run at startup? If so how would you do it?

    I've compiled a program using the API and eclipse distribution OR and can run Eclipse or by running while SSH in the myRIO. Is the only document I could find about this one: http://digital.ni.com/public.nsf/websearch/B37FA04A1CB84B6C862571A30060EF03?opendocument&Submitted&&...

    The link is a little outdated, so I'm not sure of the relevance, it is today. I changed the lines of lvrt.conf to:

    RTTarget.ApplicationPath=/c/ni-rt/startup/startup.rtexe
    RTTarget.LaunchAppAtBoot = True

    None of the settings seem to do anything. I also tried to run the program as a script using rc.local which does not seem to be used in the same way as it is in Ubuntu. My compiled pogram does not include the .rtexe extension although I can add it later that might not be the same.

    I made sure that startup programs 'disable' has been disabled on the Server Web myRIO.

    Thank you

    Just in case someone has a similar question:

    https://decibel.NI.com/content/message/144527#144527

  • The listener is down: even if a listener with the name "AUDITOR", is running on this host at the port: "1521", it has not started using "the target LISTENER. ORA file.


    I moved a listener on a host in a House different oracle. The headset works fine, but EM 12 c shows that the listener is down with the following summary:

    The listener is down: even if a listener with the name "AUDITOR", is running on this host at the port: "1521", it has not started using "the target LISTENER. ORA file. CORRECTIVE ACTION: To monitor this "EM listener target" with its current configuration, you must stop the process of listening running and start it using the Listener parameter file: opt/oracle/product/12.1.0.2/network/admin/listener.ora. Alternatively, you can update "this target LISTENER. Location ORA setting"with the location of the listener running, which started using the: opt/oracle/product/11.2.0.3/network/admin/listener.ora.

    EM 11 g, I simply changed the configuration of the listener for the different oracle home, argued the change and in a few minutes the listener would show that 'UP' with the oracle of new home. I upgraded to MS 12 c (12.1.0.4) and can't find how to do this. Can someone give me the procedure.

    Thank you

    Ron

    Hi Ron,

    Can you please do the following?

    -Create a for the listener listener.ora file, stop and start the receiver using the listener.ora file. If the file is located in a default location, set the TNS_ADMIN environment variable to that location before you start the listener.

    -Log on to the EM console, go to the homepage of the listener.

    -In the Oracle Listener menu, select target Configuration > Configuration of the analysis.

    -Ensure that the parameters, including the Listener.ora directory, are properly.

    Kind regards

    -Loc

  • (Inspiron 7720) Cannot be started on the installation of Windows 8 media in UEFI

    Hello

    I just got a Dell's Inspiron 7720 (computers laptops 17 ") running on Windows 8. As usual, I want to reinstall Windows 8 myself to ensure that I have a clean install (and to be sure, I'll be able to do if I change my HARD drive). I want to do in UEFI mode and not in Legacy mode.

    • I tried to boot on Dell Windows 8 DVD (requested by phone, IE 8 64-bit Windows) by pressing F12 at startup: the only options are "Windows Boot Manager" and "Network Boot. No way to boot to DVD, Windows starts automatically.

    I went in the "Bios" by pressing F2 at startup (Startup tab):

    • I tried to disable "Secure Boot": no result, kept this option disabled.
    • I activated the Option Rom legacy: a new menu "Legacy Boot: ' allows me to start on the drive of DVD, but housing starts of start-up Mode Legacy, which is not allow me to install Windows 8: the installer says my partition table is GPT, so I can't select any partition on my discs to install the OS.
    • I tried to add a boot option with the name of the Boot Option as ' CD/DVD/CD-RW Drive': is in the list of system files "PciRoot (0x0) / Pci (0x1F, 0 x 2) /Sata (0x3, 0x0, 0x0) /CD" or 2 entries like "PciRoot (0x0) / Pci (0x1F, 0 x 2) /Sata (0x3, 0x0, 0x0) /HD'." ""» I tried all. I left the "File name" line empty. No results: the CD begins to spin at the start and then the operating system starts 2 seconds later. I tried repeatedly pressing "Enter" immediately after the choice of my new boot entry in F12 menu, same results.
    • I tried everything above with the operating system on a USB stick (formatted to Fat32 using this http://www.servethehome.com/uefi-bootable-usb-drive-windows-8-windows-server-2012/), no result. The light on the USB is indicating activity for 2 seconds, then turns off when Windows starts.
    • I tried to start my DVD and my USB on a new Inspiron 660 (office): a line is automatically added in the F12 boot menu and I can start on the DVD or USB in UEFI mode (and I can reinstall Windows), so my devices seem not to be the problem.
    I spent two hours on the phone with a Dell technician, and he was not able to solve my problem.
    It seems to me that Dell has not even attempted to check whether their own DVD of Installation OS works on their computer
    I think I need to write something in the "File name" box when you add a new Boot Option. But why? I forgot something?
    Thank you in advance for the time you spent reading this.

    OK I solved the problem. It's very simple, but obviously the bios needs an update: the one-time boot menu (the one launched by pressing F12 at startup) does not work in the UEFI.

    So, how to start on the DVD in UEFI mode:

    • Insert the DVD into the drive
    • Start your computer by pressing F2 to enter the Bios
    • Go to the Startup tab
    • Add a boot option with the name of the Boot Option as ' CD/DVD/CD-RW Drive' and check that the 'CD' in the end enabled, as "PciRoot (0x0) / Pci (0x1F, 0 x 2) /Sata (0x3, 0x0, 0x0) /CD'." Let the empty file name entry.
    • Put the new entry before 'Starting Windows Management' in the UEFI Boot section.
    • Save and restart.
    • When asked, press a key to boot from the DVD. DO NOT USE one-time F12 BOOT MENU: by SELECTING ' CD/DVD/CD-RW Drive' will NOT WORK.
    When Windows is reinstalled correctly, just change the new boot order or delete the boot entry you created before. Never use the single start menu unless you want to start in Legacy mode (it works).
    I can't believe I lost so much time on this... I hope this will help.
  • When using windows scan & fax tool I get: _ 'network processing timed out. Check the scanner settings & network"error

    I am running Vista ultimate on 64-bit computer with a Linksys WRT310n router in LAN mode. I also have a Canon MF4370dn printer that prints screen & documents ok. I can see the printer on the network.

    I'm mainly interested in the function of scan here.
    With the mf scanner set to scan mode of network (according to Canon), I opened the Windows scan & fax tool, I select the WIA Canon scangear printer/scanner/fax to network & I get a panel where you select dpi/jpeg/bmp etc. When I select the function preview or scan I get an error message that says "network timed out treatment. Check the settings of the scanner & network.

    I read a lot of sour comments on the analysis of the network of this machine. It's a shame, because it is a machine of great, fast & compact mono laser. I have disabled the firewall of the router, still no go. I also tried the rout USB with software to reinstall with network for others, printing & for my machine but italways deferred to the network on mine with the same error message.

    I also read where it analyzes only at 300 dpi... so with all these pros & cons I decided to get a good, dedicated, scan that will probably better results of the scanner anyway.

    Thank you for all the good sites & info you have provided.

    Newbie.

  • When I right click on the icons to run where it shows the location of the opened file and run as administrator under that it says "start". Got rid of the virus, but cannot get rid of "start".

    When I right click on the icons to run where it shows the location of the opened file and run as administrator under that it says "start". I ran 6 different viruses, malware, rootkit, scans etc. everything looks clean, but 'start' is still there when I right click the executable files. How can I get rid of him? I tried the System File Checker tool, it didn't work. When I click on "Start" it is not now open applications.

    Do not know if it is any help.

    http://www.online-tech-tips.com/computer-tips/Windows-right-click-context-menu/

    Be careful when you change the registry so... Make sure that you have backups.

  • The Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

    original title: The Audio service is not running windows vista

    Hello

    I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

    I saw it in Event Viewer

    The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

    Thank you

    -Majid

    original title: The Audio service is not running windows vista

    Hello

    I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

    I saw it in Event Viewer

    The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

    Thank you

    -Majid

    These error messages are a pain in the neck to extract useful information.

    I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.

    If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.

    Realtek and NVIDIA, for example get stuff good free audio driver.

    If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period

  • I get a message from DLL run when starting my laptop with Windows 7

    I get a message from DLL run when starting my laptop with Windows 7.  One of the messages is: c:\users\xxx\AppData\Local\fgpise.dll. How can I get rid of these messages? McAfee has detected two Trojan horses and withdrawn earlier today. He says that my system is clean now. Did that cause this problem?

    Hello

    Do not assume that any malware has been removed.

    This is probably the result of malware then do a very thorough check and when the system
    is clean see the following message to remove this error.

    If you need search malware here's my recommendations - they will allow you to
    scrutiny and the withdrawal without ending up with a load of spyware programs running
    resident who can cause as many questions as the malware and may be more difficult to detect as the
    cause.

    No one program cannot be used to detect and remove any malware. Added that often easy
    to detect malicious software often comes with a much harder to detect and remove the payload. Then
    its best to be thorough than paying the high price later now too. Check with them to one
    extreme overkill point and then run the cleaning only when you are sure that the system is clean.

    It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
    the regular windows when you can.

    TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
    It will display all the infections in the report after you run - if it will not run changed the name of
    TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
    check with the other methods below.
    http://support.Kaspersky.com/viruses/solutions?QID=208280684

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
    (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/products/malwarebytes_free

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can
    Download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
    security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
    here or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
    (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
    what you have done (such as antivirus, firewall, etc.).
    http://www.SurfRight.nl/en/hitmanpro

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    http://www.eset.com/onlinescan/

    -----------------------------------

    Original version is now replaced by the Microsoft Safety Scanner
    http://OneCare.live.com/site/en-us/default.htm

    Microsoft safety scanner
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    ----------------------------------

    http://www.Kaspersky.com/virusscanner

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    After the removal of malicious programs:

    Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
    system files.

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -----------------------------------------------------------------------

    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

    ======================================

    If necessary AFTER THAT you are sure that the machine is clean of any malware.

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • How to disable programs and commissioning that run when you start Windows 7

    How to disable programs and commissioning that run when you start Windows 7

    Hello

    References to Vista also apply to Windows 7.

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135

    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062

    To see everything that is in charge of startup - wait a few minutes without doing anything-
    then right click on taskbar - task manager - take a look at stored by -
    Process - Services - this is a quick reference (if you have a little box on)
    Lower left - show for all users, then check that).

    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    Is a quick check to see who are loading method 2 - using MSCONFIG
    then after a list of these here.

    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out what files, registry keys, and other objects
    processes have open, which DLLs they have loaded and more. This unique
    powerful utility will show you even owned by each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured to start automatically
    When your system boots and you connect. Autoruns shows you the complete list of
    Locations of registry and files where applications can configure start automatic settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

    Monitor Monitor - free - file system, registry, process, thread and
    Activity of the DLL in real-time.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    WhatsInStartUP - free - this utility displays the list of all applications that are
    loaded automatically when Windows starts. For each application, what follows
    the information is displayed: Type of startup (registry/Startup folder), Command - Line
    Channel file, the product name, Version, company name, location in the registry or
    file system and more. It allows you to easily disable or remove unwanted programs
    that runs in your Windows startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe
    not. The window Watcher says it all, every window created by each execution of the statement
    program, if the window is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    Hope these helps.

    Rob - bicycle - Mark Twain said it is good.

  • How can I find what I need at startup of the computer programs, I went to the System Configuration, but do not know what to uncheck to stop running when the computer is started

    I ran a report on my computer, in case of problems.  It detected that I needed to verify in the Configuration of the system on the programs that were running at the start of the computer.  I have several here I will list who is here, and maybe someone can tell me that I don't need at start-up.

    1 Microsoft Security by Microsoft

    2 updater Java (TM) Platform SE Auto by Sun Microsystems

    3 Localnet Express 3.0 - propel Software Corp. (Localnet is my provider and this express is supposed to help my computer go to websites faster)

    4 Roc_Roc_NT_unknown-AVG safe search (I was told I didn't need AVG antivirus, so I deleted it out)

    5. default manager by Microsoft

    6 adobe Acrobat from Adobe Systems

    7 adobe Reader by Adobe Systems

    8 AVG Tray-unknown

    I hope someone can help me with this takes 15 min for a loading site approx. 30 to load the game after I finally get it, then the game is frozen and won't do anything.  Even for all other sites, I'm at my wits end and don't know what to do.  I have dial up and Windows 7.  Just started having problems after getting this new service provider.

    Hello Wanda.

    One command, but lets see what we can do to whittle the list down. First, dial-up internet connection is slow, so keep that in mind that we work here.

    Second, almost all your startup programs are valid and advised to load at startup of Windows. Some possible changes:

    (1) If you need not a specific to Java, such as might have the game that you are trying to play, so you don't need to have it is launched at startup.

    (2) regarding the Adobe programs, why do you have Acrobat on your computer? Do you need to create PDF files? Adobe Reader which has many freeware alternatives that are faster, used to read PDF files. So if you need only to read PDF files, you can stop Acrobat from loading at startup.

    (3) other startup programs are all legitimate. And remember, just because you do not start a program at startup, does not mean that you cannot start later if you find that you don't need it.

    (4) the problems you encounter to "all sites that you visit" could be a function of malware. You don't have AVG Antivirus running on your computer just? I recommend do you a scan in depth and then put in quarantine and remove any infections it finds.

    (5) after you run the virus scan, I suggest that you try to download and run these two scanners. First MalwareBytes' Antimalware, here: http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572.html.  Secondly, SUPERAntiSpyware, here: http://download.cnet.com/SuperAntiSpyware-Free-Edition/3000-8022_4-10523889.html. Quarantine and remove all infections they find.

    (6) after doing this, restart your computer and see how it works. Please post your results here, and if you have any questions during this process, post here and I'll help you. Let me know how you fare.

    Kind regards

    BearPup

  • Today my Macbook Pro could not start.  He showed me the ban or no symbol.  I was able to access disk utility and run first aid on the SM0256G of SSD Apple media successfully.  Cannot start in normal/safe mode.  Should I delete/install so I can?

    MacBook Pro 13 '' end 2015.  256 GB SSD drive. El Capitan last version 10.11.4. I turned on the Macbook Pro and it could not start.  The progress bar with the Apple Logo would be present but would end not showing the symbol «»  I tried to boot mode safe - no go.  I have not reset PRAM help.  I was able to access disk utility and run successfully the first aid. No help. I was unable to restore two separate backup.  The utility show me backups however when I would go to the next screen and no backup is available.  Disk utility displays the SSD.  Can I erase the disc and download OS X install?  Thank you.

    At this point, there is no need to delete. A new copy of Mac OS X can be installed directly over the old copy. This process replaces the components of Mac OS X on a file by file basis and adds missing ones, there will be no major throwing away what anyone, unless there is a power failure.

    You have already run disk first aid.

    Now use mode of recovery (command + R to start) to "Re-install Mac OS X. It should install the latest revision of the main version that you ran last.

  • Foxfire runs when "Pac Man" plays continuously. How to stop it?

    It started this morning for the first time. He plays when Foxfire is activated, not with IExplorer. Foxfire runs when "Pac Man" plays continuously. How to stop it?

    This has happened

    Each time Firefox opened

    NA

    User Agent

    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6.4; .NET CLR 1.0.3705; .NET CLR 1.1.4322;. Media Center PC 4.0; .NET CLR 2.0.50727; WWTClient2 .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    Removal of CoolPreviews 3.1 seems to have solved my problem.

Maybe you are looking for

  • MacBook pro not recognizing the correct password when connecting

    When I try to login, it rejects the password - if I change username, then return that he recognizes her!

  • A80-117 bootproblem

    Hello I just bought a notebook a80 - 117 windows pre-installed xp home. My problem is, that when ilogin on first page, 4 of the 5 times the system remains on the start page. Only the remains of mouspointer of work, besides the system stops. the only

  • Update of HP620 wireless module

    Hello HP620 with module RTL8191SE saves a lot of The RtkDevSvc service has reported an invalid current state 0. in the Windows 7 SP1 64 bit system event log I tried to fix it reinstall the latest driver from HP (no update of Realtek driver, I should

  • Voicemail notification stays

    My voicemail icon does not go far. I'm not looking the fourms but the only answer I found was on factory reset the phone, but I don't want to do this and I was wondering if there was any other way, that I could get rid of him. Thanks in advance

  • Runtime error! R6002 - floating point not loaded support

    I use a Hardrive external Transcend to back up my computer, but when I just tried to use the backup software of Transcend I get a runtime error that the decimal point floating support is not loadedHow can I fix it?