definition of expiration of password for all users of oracle R12 applications

Similar Questions

• How to change the password for all users in the database

  Hi buddies!
  
  Could someone tell me how to change the password for all users in the database? I want to set the same password for all users.
  
  Thank you.
  
  Nith
  
  Published by: user645399 on March 1, 2011 14:23

  Write the file spooling
  as

  Make sure that all profiles has password_verify_function with a NULL value

  then

  Select 'edit user' | username: ' identified by ;' from dba_users;

  you will get the output... you just run.

• Y at - it a master password for all users

  I want to know is there a master password for all my users acconuts as administrator user and if it is how to get or make a

  There is none, and you can't make one.

• issue by allowing expiration of password for internal users in ACS5.1

  Dear all,

  I use Cisco ACS 5.1.

  If I am allowing for internal users password expires, preconfigured users are disabled automatically.

  I enabled users one by one, even after that some time (from 30 to 40 minutes) users are automatically get disabled.

  Need solution to activate the password expiration.

  Kind regards

  William D

  Two suggestions I have:

  S ' ensure that you have the latest fixes for 5.1. Patches are cumulative and was the last patch. However, all least suggest you include at least patch 5.1.0.44.3 which includes a fix for the following problem:

  CSCtf06311: all internal users automatically disabled after you be connected to a single user

  -In 5.1 password expiry applies to all users and there is no way to exclude specific (for example the system users) to have their password has expired. If you want this feature would need to move to 5.2 and then install some 5.2 patches

  Al the patches I want to talk to are available for download from CEC

• Definition of default password to all users in IOM

  Hello
  
  I want to set the password by default for all users of provisioning in IOM through trust recon.
  
  Please let me know how to achieve this.
  
  Thank you

  Follow my above code (you can use the same as it is). You must write your code in bulk as well run and loops through each user

  public BulkEventResult run (long processId, long eventId, BulkOrchestration bulkOrchestration) {}

  iterate over each user

  }

• Setting up passwords for new users

  I am the Admin of my group. How to create a new user account (for other users) that accepts a default password (an I put) then ask to set up a new password?

  I don't have access to all the operating systems that are past their support life, but I thought that he used the same under Windows 7. Can you type net help user and see what it shows options available?  Maybe Vista doesn't.

  Here are the options I want.

  NET USER
  [username [password | *] [options]] [/ DOMAIN]
  username {password | *} / add [options] [/ domain]
  username [/ delete] [/ domain]
  username [/ TIMES: {both |}] ALL}]

  NET USER creates and modifies the user accounts on computers. When it is used
  without switches, it lists the user accounts of the computer. The
  user account information is stored in the user accounts database.

  user_name is the name of the user account to add, delete, modify, or
  view. The name of the user account can have as much of as
  20 characters.
  password assigns or changes a password for the user account.
  A password must meet the minimum length set with the
  / The command NET ACCOUNTS MINPWLEN option. It can have as
  up to 14 characters.
  * Produces a prompt for the password. The password is not
  displayed when you type it at the password prompt.
  / DOMAIN performs the operation on a domain controller of
  the current domain.
  / ADD Adds a user account in the user accounts database.
  / DELETE Removes a user account from the user accounts database.

  The options are the following:

  Description of options
  --------------------------------------------------------------------
  / ASSETS: {YES |} NONE} enables or disables the account. If
  the account is not active, the user cannot
  access to the server. The default value is YES.
  / HOW: 'text' provides a descriptive comment about the
  the user's account.  Surround the text in
  quotes.
  /CountryCode:nnn uses the operating system country code to
  implement the language files specified for a
  helps the user and the error messages. A value of
  0 means the default country code.
  / EXPIRES: {date |} NEVER} causes the account to expire if date is
  set. NEVER sets no time limit on the
  account. An expiration date is in the
  form mm/dd/yy (yy). Months can be a number,
  statements, or abbreviated with three
  letters. The year can be two or four digits.
  Use forward slashes (/) (without spaces) to separate the
  parts of the date.
  / FULLNAME: "name" is the full name of the user (rather than a
  (username). Place the quote name
  mark.
  /HOMEDIR:pathname sets the path for the home directory of the user.
  The path must exist.
  / PASSWORDCHG: {YES |} NO} Specifies whether users can change their
  password. The default value is YES.
  / PASSWORDREQ: {YES |} NO} Specifies whether a user account should have
  a password. The default value is YES.
  / LOGONPASSWORDCHG: {YES |} No.} Specifies whether users must change their
  password at the next logon. The default value is no.
  / PROFILEPATH [: path] defines a path to the logon of the user profile.
  /SCRIPTPATH:pathname is the place of the user logon
  script.
  / TIMES: {both |} ALL} this is the logon hours. TIME is expressed as
  day [-day] [, day [-day]], time [-time] [, time]
  [- time]], limited to increments of 1 hour.
  Days can be specified or abbreviated.
  Hours may be the rating of 12 or 24 hours. For
  12-hour notation, use am, pm, a.m.., or
  h ALL, a user can still log on.
  and an empty value indicates a user can never
  Open a session. Separate the date entries, time with
  a comma and split several day and time
  entries with a semicolon.
  / USERCOMMENT: 'text' Add or edit the user allows an administrator
  Comment for the account.
  / Workstations: {computername [,...] | *}
  Lists up to eight computers of
  which a user can connect to the network. If
  / Workstations has no list or if the list is *,.
  the user can log in from any computer.

• Docking station by default for all users

  I would like to create a default dock that all users will have when they connect.

  So far on the administrator account, I installed the dock how I want it to look.

  I copied the \Library\Preferences\com.apple.dock.plist file, and then paste it in the system\library\User / Template\English.lproj file.

  This doesn't seem to work.

  I also tried to stick in system\library\User / Template\English.lproj\Library\Preferences

  That did not work.

  I also tried to stick in system\library\User / Template\English.lproj\Library\Application/ Support

  This no longer works.

  Any ideas?

  I remind you that you are on a UNIX machine and not Windoze. Stop putting human oblique zigzag in your paths - they lean forward under macOS. A slash (as you'll see below) is used to escape white space in a path name.

  In your local account, configure the applications you want for all users (including system preferences: Dock settings) in your Dock. Then apply the following copy command in the Terminal of your home directory (you will be asked your admin password).

  sudo cp ~/Library/Preferences/com.apple.dock.plist Template/English.lproj/Library/Preferences system/library/User\

• How can I block the SMTP for all users but mail server

  I can't understand (1) how can I refuse port 25 for all users on the network and allow for Exchange server SMTP, also I have MS Exchange, which manages the web and smtp and in my setup below you can see that there static mapping to publick ip with http/smtp only, then (2) how can we separate the traffic entering a publc IP will outside servers inside ex : (MSexchange public ip address is x.x.x.207-> http = 172.16.2.13, 172.16.2.14 = smtp)

  Thank you

  ___________________________________________________

  6.3 (1) version PIX

  interface ethernet0 car

  Auto interface ethernet1

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  names of

  name 172.16.4.10 pdc

  name 172.168.4.11 llc

  name 172.16.4.11 ftp

  object-group service E-mail tcp

  port-object eq www

  EQ smtp port object

  object-group service tcp - udp terminal

  3389 3389 port-object range

  object-group service mw tcp - udp

  Beach of port-object 367 367

  radmin tcp service object-group

  RemoteAdmin description

  4899 4899 object-port Beach

  object-group service mw1 tcp

  Beach of port-object 367 367

  access-list 101 tcp refuse any any eq smtp

  access-list 101 permit tcp any host object-group x.x.x.251 terminal

  access-list 101 permit tcp any host x.x.x.214 object-group radmin

  access-list 101 permit tcp any email host x.x.x.207 object-group

  access-list 101 permit tcp any host x.x.x.212 object-group mw1

  access-list 101 permit tcp any host x.x.x.211 eq ftp

  sheep ip access-list allow any 192.168.101.0 255.255.255.240

  IP address outside x.x.x.194 255.255.255.192

  IP address inside 172.16.2.1 255.255.0.0

  IP verify reverse path to the outside interface

  IP verify reverse path inside interface

  alarm action IP verification of information

  IP audit attack alarm drop action

  IP local pool mypool 192.168.101.1 - 192.168.101.20

  don't allow no history of pdm

  ARP timeout 14400

  Global interface 10 (external)

  NAT (inside) 0 access-list sheep

  NAT (inside) 10 0.0.0.0 0.0.0.0 0 0

  static (inside, outside) x.x.x.212 172.16.4.12 netmask 255.255.255.255 0 0

  static (inside, outside) x.x.x.251 172.16.4.51 netmask 255.255.255.255 0 0

  public static x.x.x.214 (Interior, exterior) pdc netmask 255.255.255.255 0 0

  public static x.x.x.211 (Interior, exterior) ftp netmask 255.255.255.255 0 0

  "REM # 172.16.2.13's Exchange with Outlook Web servers #

  static (inside, outside) x.x.x.207 172.16.2.13 netmask 255.255.255.255 0 0

  Access-group 101 in external interface

  Route outside 0.0.0.0 0.0.0.0 x.x.x.193 1

  enable floodguard

  Sysopt connection permit-pptp

  VPDN PPTP-VPDN-group accept dialin pptp

  VPDN group PPTP-VPDN-GROUP ppp authentication pap

  VPDN group PPTP-VPDN-GROUP ppp authentication chap

  VPDN group PPTP-VPDN-GROUP ppp mschap authentication

  VPDN group PPTP-VPDN-GROUP ppp encryption mppe 40

  VPDN group VPDN GROUP-PPTP client configuration address local mypool

  VPDN group VPDN GROUP-PPTP client configuration dns 172.16.2.6 172.16.4.6

  client PPTP-VPDN-GROUP VPDN group configuration wins nymc_pdc

  VPDN group VPDN GROUP-PPTP pptp echo 60

  VPDN group VPDN GROUP-PPTP client for local authentication

  VPDN username * password *.

  VPDN allow outside

  This is your problem:

  Access-group 101 in external interface

  You link this access list to your external interface. This means that the rules are applied to incoming traffic IN your network. The implicit IP any any rule is because you have not bound to an access list on your inside interface.

  To prevent users from going out, you will need this:

  access list permit tcp host exchange_IP OUTPUT no matter what eq smtp

  access list tcp OUTPUT deny any any eq smtp

  Access-group interface inside OUT

  See how this access list is linked to the inside interface... it will affect traffic leaving your network. Note: Once you apply this inside allow any interface it will remove the implicit.

• How to create a password for my user account?

  Original title: password at startup of Windows 7 Home Premium

  Is there a way to create a password to start my computer?  I have Windows 7 Home Premium.  I have not done this when I first bought my computer and I would like to have because my now my 7 YO son is to get up very early and get the computer without our permission.

  If this is done, you have any other suggestions other that disconnect all computers in our House and hide the?

  Thank you.

  You can set a password for your administrator accounts, you can set a password for your own user account to the daily & you can also a password for the user account of your son.  The link shows how you and advises you to create two administrator accounts to ensure you don't get never accidentally locked on the PC.

  See precautionary measures 1 - create two additional administrator accounts

• Impossible to retrieve the password for the user FUSION_APPS_WSM_APPID using ldapsearch

  Dear all,

  I'm unable to retrieve the password for the user FUSION_APPS_WSM_APPID using the ldapsearch command

  Is the correct command extract the password for the user FUSION_APPS_WSM_APPID below?

  $ORACLE_HOME/bin/ldapsearch - h < hostname > Pei 3060 d 'cn = sleep '' w < password > base b s 'orclCSFKey = basic.credentials, cn = oracle.wsm.security, cn = CredentialStore, cn is FusionDomain, cn = JPSContext, cn is FAPolicies' objectclass = * orclcsfname orclcsfpassword

  Kindly help me in this problem.

  Kind regards

  Vinayak K

  Can you clarify why you need recover the password? Application identities are designed for internal processing and never to be exposed outdoors or used for other purposes only lift access to the code in some scenarios within the system. So only the administrator must have access to the account and the password of access they would reset it in the store of credentials if necessary. That said I think that the admin can retrieve the password using the command listCred wlst something like:

  listCred(map="oracle.wsm.security",key="FUSION_APPS_WSM_APPID-KEY")

  --

  Jani Rautiainen

  Relationship with the developers of Applications in fusion

  https://blogs.Oracle.com/fadevrel/

• Reset password for virtual users

  Is it possible to reset a password for virtual users or if they forgot get it back? All I see is to remove the virtual user and again share access.

  See you soon

  When the user of the virtual user name is entered in the login screen, a forgotten password? link in the lower part. Clicking on it will reset the password and send an e-mail to the e-mail address of the user.

  Is that what you are looking for?

• Rest of the passwords for multiple users in 11i

  Hi Hussein.
  
  I need to reset the password for 10 users of 11.5.10.2 Application. Please let me know what is the best way. Is it possible to reset the password of the interface as well.
  
  Thank you
  -Samar-

  Samar,

  Use FND_USER_PKG. UpdateUser API to change the password of users - see (Note: 344979.1 - users are not prompted to change their password when using Fnd_user_pkg.) UpdateUser).

  Another possible solution to force these 10 users to change their password. Modify the script in AFCPEXPIRE.sql for 10 users, you want them to change their password - see (Note: 414976.1 - how to Force all Applications users to change their password?).

  Kind regards
  Hussein

• HOWTO enable Adobe pdf-plugin and add packs of langugate for all users

  I have firefox installations on many terminalservers and my users are tapped daily with a prompt to enable Adobe PDF plugin view PDF files in the browser.

  We use a Group Policy object to substitute different parameters on the homepage by default and disabled the built-in PDF reader.

  How can I activate the plug-ins for all users?
  How to install the langugate packs and a dictionary for all users for Norwegian?

  Unfortunately, you can install is no longer extensions including Linguistics by the record of distribution/bundles in the Firefox program folder.

  • Bug 1144127 - Remove support for distribution/bundles (39 +)

  For language packs, see:

  • https://developer.Mozilla.org/Installing_extensions
  • https://developer.Mozilla.org/Adding_Extensions_using_the_Windows_Registry

  A file to mozilla.cfg in the Firefox program folder can be used to lock the prefs or specify new values (default).

  A file local - settings.js must be placed in the folder "by default/pref" also the file prefs.js - channel where to specify using mozilla.cfg.

  pref("general.config.filename", "mozilla.cfg");
  pref("general.config.obscure_value", 0);
  

  These functions can be used in the mozilla.cfg file:

  defaultPref();	// set new default value
  pref();		// set pref, allow changes in current session
  lockPref();	// lock pref, disallow changes
  

  See the Configuration:

  • https://developer.Mozilla.org/en-us/Firefox/Enterprise_deployment

  See also:

  • http://KB.mozillazine.org/Locking_preferences
  • http://Mike.kaply.com/2012/03/16/customizing-Firefox-AutoConfig-files/

  You can try this in the mozilla.cfg file:

  //
  pref("plugin.state.nppdf", 2);

• 33 Firefox extension for all users

  How can I make an extension available for all users using Firefox 33?
  I have the as and extract if necessary?

  See:

  • https://developer.Mozilla.org/Adding_Extensions_using_the_Windows_Registry

• is there a way to tell firefox allow and remember the java plugin for all users via the command line or a script?

  Hello

  I have about 200 computers I want to push the next to parameter

  allow and remember the java plugin for firefox for all users
  

  is it possible to do this via a script or configuration file?

  You must create two files in the Firefox program folder.

  • local - settings.js file in the defaults\pref folder where you will find the channel - prefs.js
  • mozilla.cfg in the main folder of the Firefox program