Definition of registry FPGA: using the reference transmission

Similar Questions

• During startup, I get an error message that the registry database cannot find a file and modify registry to delete the reference to the file in the registry. How can I do this?

  Original title: Registery Error Message

  During startup, I get an error message that the registry database cannot find a file and modify registry to delete the reference to the file in the registry.  How can I do this?

  Hello

  • What were the changes made before the problem occurred?

  I recommend you perform the clean boot.
   
  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Get Null value online by using the reference line.

  Hi guys,.

  I get the null value of the line everytime I use the reference line. Here is my code.

  String rowReference = pageContext.getParameter (OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);

  Line OARow = (OARow) am.findRowByRef (rowReference);

  System.out.println ("row" + Row);

  If (line! = null)

  {

  System.out.println ("Surfing");

  Object succObj = row.getAttribute ("INTERFACE_HEADER_ID");

  String succStr = succObj.toString ();

  throw new OAException ("" + succStr, OAException.INFORMATION);

  }

  Thank you

  I found workaround to get a current line like «($OA.» CURRENT. Id_interface)"as REFERENCE of the LINE does not work. I'm passing the parameter to my Textinputbean in the application of process method and by capturing the current values in the process of request form

  Treat the claim code

  Hashtable params = new Hashtable (1);

  params.put ("param1", pageName);

  Hashtable paramsWithBinds = new Hashtable (1);

  paramsWithBinds.put ("param2", new OADataBoundValueFireActionURL (oamessage, "{$INTERFACE_HEADER_ID}" ""));

  updateIcon.setFireActionForSubmit ("updateRecord", params, paramsWithBinds, false, false);

  Process form Code

  If ('updateRecord".equals (pageContext.getParameter (OAWebBeanConstants.EVENT_PARAM)))

  {

  System.out.println ("after" m "+ pageContext.getParameter ("param2")); / / give you current value as $OA. CURRENT. ID_INTERFACE

  }

• Cannot use the references in Subvi cluster (error 1055, invalid references)

  Hello

  I'm going through a lot of that through a cluster to a Subvi.

  The idea here is to manipulate objects in the MainVI in the nodes property thorugh Subvi, which gains the reference number of the cluster.

  In the Subvi, I use unbunling by name to access the references I need. However, I get an error 1055 (invalid references) every time I try to access the object by using the node property.

  What I am doing wrong?

  Attached you will find three files:

  The mainVI: Main.vi

  The Subvi: Single_Cam_RefBased.vi

  The def of the type for the cluster: RefClusterTypeDefinition.ctl

  Thanks in advance,

  Marcel

  SteveChandler wrote:

  The constant you have wired to the bundle is not the same as the cluster of type defined wired to your Subvi.

  I was going to say the same thing. This should be the first thing to try. (I haven't studied the Subvi, but it seems buggy too...)

  COMMENT: Again something is screwed in the current VI which makes no sense. Hovering above the terminal should tell us information about the corecion, but in this case it is said that the terminal is something like a cluster of error. This might just be a cosmetic bug...

  

• Resources on Rio fpga using the NI 9403 module

  I use a CRIO and it works very well with my A/D and D.-a. When I add an e/s digital NI 9403 module, it eats all my resources even if I don't use all that in the circuit! Is there a way where I can use say only 2 or 3 pins e/s and not other use without him swallow all my resources.

  I found the problem. When I added the module e/s I used the mode of discovery and he went. It seems it went past Scan mode for some reason any. When I moved the unit on Solution Explorer up next to two other files, I had made A/D D - A mode FPGA, he changed his mode of FPGA itself and then I could remove I/O pins as required. The icon, then changed when I pulled a PIN on my FPGA block diagram and everything was ok.

• How to change the color of the elements of cluster using the reference

  Hello

  I have cluster with 10 LEDS, each LED represents a test within my program, based on success or failure, I want to change the color of each LED, I use the cluster as input reference to test subvi.

  Is there a method to change the color of the induvidual elements?

  Thanks in advance.

  Can be used with any wire Ref properties are determined by the class of the wire Ref itself.

  Generic refs are geneirc properties.

  The FTA to obtain the properties of the elements within the cluster, you will need to tell LV class is a cluster. The same for the items in the cluster.

  Please consider this nugget on the help of control references. Don't worry about understanding everytihing that I wrote in this nugget, since it was written to be entertaining at all levels. Find the section where I show

  

  How to cast Ref nums as of specific types.

  Ben

• History of the reset using the reference of table standings

  I want to erase all data of a chart using its reference, but this property is not available. So far the only way to do seems to be using a static property node (the one you are creating click with the right button on the graph by selecting the property you want). Is there another way?

  Because the property node is not strictly typed, the history of the ranking is not available.  If you do the graphic reference of waveform of the wave of chart, the release of the will "of a more specific class' be strictly typed.

  See attachment.

• Digital background color works do not when you use the reference

  Hello

  I am trying to use a reference to change the background color of a digital indicator in a Subvi.  The sub - VI strives to change a digital indicator, but when I use a reference to another (reference Numeric.vi) VI, instead of doing all the background, the color I want, only the outline is the color I want, with the rest in white (natural color).    Is there a way to avoid this?

  You must use the NumericText.TextColors.BG property instead.

  Felix

• History of clear waveform using the reference

  Hello

  I would like to clean up the history of the wave I have in my hand Vi. I'm passing his reference to a sub - VI. I'm not able to find ownership of historical data among the other properties of the property node. Behold that I have:

  

  Thank you.

  -H.

  And I think that your graphic reference is wrong. Have you copied the reference of the hand? In your hand, you have connected a data type? Since it has a variety of data that can be wired, you must do this so the history is the correct data type.

  And what you're trying to do with the True constant wired for all at the end of the Terminal loop? The loop only runs once.

• Definition of privileges by using the API

  Hello

  I am a newbie of TestStand. Please bear with me if this question seems very basic.

  I am trying to build a c# wrapper around the user management module in TestStand. I created a new user interface that reads all the characteristics of a user as his groupname, privileges etc.

  How can I access the NI_UserCustomPrivileges using the API?
  I need to access privileges custom under the grouping custom privileges.

  I'd appreciate any help in this.

  Use the User.HasPrivilege method.  This method takes as a parameter a representative the particular privilege search string you are looking for.  For example, you can search the database name, i.e. 'RunSelectedTests' [User.HasPrivilege ("RunSelectedTests")] or you can search the full path, for example "Debug.RunSelectedTests".  In this way, you should be able to search privileges custom as "Custom.MyPrivilegeName."  Note that if you are only looking for the database name and there are several instances of the name of this database that exists, TestStand will only work on the first instance it finds.

• using the reference find send me modal autoguiding errors

  Hello

  We have an NI PXI-7354 controller not to not/Servo control a player Primatics PN 0-7205-0012 2-axis, 2 rotating turntables Micos DT-120 running.  Recently we know modal errors during autoguiding'-70119 (NIMC_limitSwitchActiveError), move the desired can not be completed, because the entry limit is enabled in the direction of the market. »

  This system has worked for years, a dthi sjust began to appear on homing which occurs once a day.  This happens when the move to find reference goes to the opposite limit, because it is programmed and configured for this purpose.  It then performs a small movement to the front, and then this error occurs.  Now, I understand that this is part of the command search referrer.  It seems as if grace to carry on the switch, or perhaps in the stadium itself when it moves forward to the switch in an attempt to approach of the reverse switch slowly with specific accommodation, that is not actually the switch, and the movement fails.  It is not easy for me to change the switch on the scene, but it can be done.  I wish I could say find reference go further forward, then he actually gets the switch before it he comes again.

  So, I guess that's supposed to happen

  1: the reverse of the race during the domiciliation

  2: switch hits

  3: small forward

  4: move in the opposite direction

  5: Press the switch - success home

  Step 3 moves a pre-programmed amount?  If so how can I change?

  Alternatively, step 3 move until the limit becomes inactive, in which case I'm having bounce or noise on my switch entry.

  I tried to adjust the position of the switch House, there is a small amount of adjustment possible.  I also changed the speed of the stroke finding reference to 50000 c/s 25000 c/s and I have yet to see another failure, but I am not convinced that this is the best and most permanent action plan.

  Any help would be greatly appreciated.

  Have you had a chance to watch http://www.ni.com/product-documentation/4190/en/ ?  Your thoughts sound than the limit switch is always on even after step 3, which must turn off the switch.  Looks like that means to get around this issues is perhaps to change the direction of final approach or the speed of movement.  From this page on the limits to find: http://zone.ni.com/reference/en-XX/help/372134F-01/ni-motion_help/findforwardandreverselimits/ it seems that any direction final approach should work, because in step 3, he should see the switch disable before approaching again, but maybe give changing the final approach response to try.

• Mobile applications - target component using the component of reference - JSON is not defined in the scope

  Application based Mobile Apps to integrate angular with AEM and transfer data to angular range of AEM using angular.json.jsp and controller.js.jsp. When I am using this standalone as a component and drag to the page that is based on the angular model. The JSON created in angular.json.jsp is readable in controller.js.jsp with "frameworkType = angular.

  When this component is written in another page, in another page trying to use within the reference element, the angular.json.jsp, controller.js.jsp does not come to the image at all.

  I had a use case to create the JSON structure (to go to angular range) in one place, then all pages using the reference component. Pointers would be useful

  Hi Sandeep,

  The best recommendation I can offer at this point is to create an extension of the component/libs/foundation/components/reference that includes the node of cq: model by specifying frameworkType: angular and supports transmission by proxy of applications angular.json and controller.js to the resource "referenced". I've hacked together an example of component to prove:

  Mobile reference component example · GitHub

  Hope this helps,

  Bruce

• Make the absolute displacement using central reference point

  I want to place a large number of images of varying proportions, using the central reference point at the same point in each page.  I played with the move, and he always seems to use the upper left point.  My reading of the literature suggests that I would get the same results with transformation.

  I realize that I could do the calculations to make the move, but hope I'm missing something and there is a much simpler way to do.

  Thanks in advance

  Jerry

  I finally just did the calculations - it doesn't seem like elegent as moving using the reference of the Center but it works.

  Here is a snippet of the code with the warning that 6.125 and 5.0 are hard-coded and they shouldn't really be OCD made me round up things...

  	XY = myObject.geometricBounds
  	height = xy (2) - xy (0)
  	width = xy (3) - xy (1)
  	x_position = round (6.125 - (width/2), 3)
  	y_position = round (5.0 - (height/2), 3)
  	myObject.move Array (x_position, y_position)

  Jerry

• How do you use the freqout as the sample clock to write data on the of 6224 PCI

  Using PCI-6224, I try currently to export data using the freqout as a reference clock sample to a digital output channel. I plug the scope to see the clock on the freqout PIN. However, the data seem to be missing. How can I output the data correctly using the reference for timing? What am I missing that connects the two signals together? Any help would be greatly appreciated. I am writing this code in MS VS C++ and here's what I've done so far:

          int32       error=0;
          TaskHandle  taskHandle=0;
          TaskHandle  taskHandleFRQ=0;
          char        errBuff[2048]={'\0'};
      uInt8       data[8]={1,0,1,1,1,0,1,0};
  
      /*********************************************/
      // DAQmx Configure Clock
      /*********************************************/
      DAQmxErrChk (DAQmxCreateTask("",&taskHandleFRQ));
      DAQmxErrChk (DAQmxCreateCOPulseChanFreq(taskHandleFRQ,"Dev2/freqout","",DAQmx_Val_Hz/*Units*/,DAQmx_Val_Low/*IdleState*/,0/*Delay*/,10000/*Freq*/,0.5/*DutyCycle*/));
      DAQmxErrChk (DAQmxCfgImplicitTiming(taskHandleFRQ,DAQmx_Val_ContSamps,8));
  
      /*********************************************/
      // DAQmx Configure Digital Output
      /*********************************************/
      DAQmxErrChk (DAQmxCreateTask("",&taskHandle));
      DAQmxErrChk (DAQmxCreateDOChan(taskHandle,"Dev2/port0/line0","",DAQmx_Val_ChanPerLine));
      DAQmxErrChk (DAQmxCfgSampClkTiming(taskHandle,"/Dev2/PFI14",10000,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps,8));
  
      /*********************************************/
      // DAQmx Write Code
      /*********************************************/
      DAQmxErrChk (DAQmxWriteDigitalLines(taskHandle,8,0,10.0,DAQmx_Val_GroupByChannel,data,NULL,NULL));
  
      /*********************************************/
      // DAQmx Start Code
      /*********************************************/
      DAQmxErrChk (DAQmxStartTask(taskHandleFRQ));
      DAQmxErrChk (DAQmxStartTask(taskHandle));
  

  I think that the original code was operational. However, given that the data transmission has been set to finished, I had a hard time to visualize the data on my scope. By changing the value of DAQmx_Val_FiniteSamps to DAQmx_Val_ContSamps, I could easily see the data.

  My mistake. I'm still learning here. Thanks for the time.

• Qosmio G20-139: use the laptop screen to play on the Xbox 360

  Hi I have a question about the monitor function with the G20-139,

  I have an xbox 360 and would like to know if there is a way to use laptops screen to play on the 360 in high definition or composite mode using the monitor function. With the laptop came a composite cable at one end and a sort of headphone 3.5 mm at the other.

  I read the manual about the case and it does not work.

  Any help would be appreciated thanks

  Hello

  The port monitor - where you can connect with the composite cable can be used to display video from your digital camcorder, video game or VCR on the internal LCD screen. It can be used as a line-in port to allow the connection of a stereo device for audio input.

  In my opinion, you also need this cable to connect the Xbox to the Qosmio with composite cable plug-in software component.
  http://www.madcatz.com/default.asp?page=257&CategoryImg=Xbox_360_Cables

  Then to commence the Qosmio with the Monitor-in button that starts the Qosmio player.

  Good bye