Definition of VLAN ACL blocks all traffic inside of the vlan
Hello
I test a 7024 PowerConnect switch, do some VLAN and want to test the traffic between 2 PC connection to the vlan by default. So I put a PC on Port 1 and the other on Port 2.
I am applying only a permit ICMP any any rule on this vlan. This implies a refusal rule everything.
But now I can't ssh from one PC to another?
the ACL is an ibound IP AC, but I thought that this does not affect traffic in the vlan? Or am I wrong thinking?
We tested this installation type and got the same results as you. It seems to be normal behavior. If I get more specific information to this I will be sure to answer back with her.
Tags: Dell Switches
Similar Questions
-
Two modules ASA 6.0.0.1 blocking all traffic
Hi all
I have two sensors 5525-X blocks all traffic until what they have restarted. It happens once a day. Accordingly to the ASA don't miss them so that they do not trigger a failover event.
Power of fire virtual versin 6.0.0.1 Management Center
5525-X version 6.0.0.1 sensorIn the paper, I found this:
9 Mar 19:22:25 ActionQueueScrape.pl [27931 1 Swiss francs]: new IPReputation or files copied from nursery, necessary for the /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSync.pm 1760 line signal process.
9 March 19:27:25 [27931 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
9 March 19:27:25 ActionQueueScrape.pl [27931 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
9 March 19:27:25 ActionQueueScrape.pl [27931 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
9 Mar 19:32:30 ActionQueueScrape.pl [27931 1 Swiss francs]: cannot read the answer:
9 Mar 19:32:30 ActionQueueScrape.pl [27931 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
9 Mar 19:32:30 ActionQueueScrape.pl [27931 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
9 Mar 19:37:35 [27931 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
9 Mar 19:37:35 ActionQueueScrape.pl [27931 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
9 Mar 19:37:35 ActionQueueScrape.pl [27931 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
9 Mar 19:42:40 [27931 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
9 Mar 19:42:40 ActionQueueScrape.pl [27931 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
9 Mar 19:42:40 ActionQueueScrape.pl [27931 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
9 March 19:47:45 [27931 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
9 March 19:47:45 ActionQueueScrape.pl [27931 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
9 March 19:47:45 ActionQueueScrape.pl [27931 1 Swiss francs]: snort for reloading of data signaling IPReputation failed after two attempts to /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm line 1685.
9 March 19:47:45 ActionQueueScrape.pl [27931 1 Swiss francs]: END of TASK. 40c87442-e62c-11e5-a856-90c5001d157c | Synchronization of security intelligence from FirepowerManagementCenter. Initialization. 1520
9 Mar 19:48:31 ActionQueueScrape.pl [29616 1 Swiss francs]: START of TASK. e6aed6e6-e62f-11e5-BE19-9427c10784de | Synchronize with UM. Sending update | 0
9 Mar 19:48:33 ActionQueueScrape.pl [29616 1 Swiss francs]: update successfully pushed to UM 172.20.1.81 /usr/local/sf/lib/perl/5.10.1/SF/Synchronize/VerticalSync.pm line 396.
9 Mar 19:48:33 ActionQueueScrape.pl [29616 1 Swiss francs]: END of TASK. e6aed6e6-e62f-11e5-BE19-9427c10784de | Synchronize with UM. Sending update | 2
9 Mar 19:48:57 ActionQueueScrape.pl [29708 1 Swiss francs]: START of TASK. f5bf599e-e62f-11e5-b7db-17d7001d157c | Synchronization of security intelligence from FirepowerManagementCenter. Initialization. 0
9 Mar 19:48:57 ActionQueueScrape.pl [29708 1 Swiss francs]: new IPReputation or files copied from nursery, necessary for the /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSync.pm 1760 line signal process.
9 Mar 19:53:57 [29708 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
9 Mar 19:53:57 ActionQueueScrape.pl [29708 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
9 Mar 19:53:57 ActionQueueScrape.pl [29708 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
9 Mar 19:59:02 [29708 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
9 Mar 19:59:02 ActionQueueScrape.pl [29708 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
9 Mar 19:59:02 ActionQueueScrape.pl [29708 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
9 Mar 20:04:07 [29708 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
9 Mar 20:04:07 ActionQueueScrape.pl [29708 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
9 Mar 20:04:07 ActionQueueScrape.pl [29708 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
9 Mar 20:09:12 [29708 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
9 Mar 20:09:12 ActionQueueScrape.pl [29708 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
9 Mar 20:09:12 ActionQueueScrape.pl [29708 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
9 Mar 20:14:17 [29708 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
9 Mar 20:14:17 ActionQueueScrape.pl [29708 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
9 Mar 20:14:17 ActionQueueScrape.pl [29708 1 Swiss francs]: snort for reloading of data signaling IPReputation failed after two attempts to /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm line 1685.
9 Mar 20:14:17 ActionQueueScrape.pl [29708 1 Swiss francs]: END of TASK. f5bf599e-e62f-11e5-b7db-17d7001d157c | Synchronization of security intelligence from FirepowerManagementCenter. Initialization. 1520
9 Mar 20:14:34 ActionQueueScrape.pl [31432 1 Swiss francs]: START of TASK. 8a293d9a-E633-11e5-BE19-9427c10784de | Synchronize with UM. Sending update | 0
9 Mar 20:14:36 ActionQueueScrape.pl [31432 1 Swiss francs]: update successfully pushed to UM 172.20.1.81 /usr/local/sf/lib/perl/5.10.1/SF/Synchronize/VerticalSync.pm line 396.
9 Mar 20:14:36 ActionQueueScrape.pl [31432 1 Swiss francs]: END of TASK. 8a293d9a-E633-11e5-BE19-9427c10784de | Synchronize with UM. Sending update | 2
9 Mar 20:15:15 ActionQueueScrape.pl [31540 1 Swiss francs]: START of TASK. a2812330-E633-11e5-955f-fcea001d157c | Synchronization of security intelligence from FirepowerManagementCenter. Initialization. 0
9 Mar 20:15:15 ActionQueueScrape.pl [31540 1 Swiss francs]: new IPReputation or files copied from nursery, necessary for the /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSync.pm 1760 line signal process.
9 Mar 20:20:15 [31540 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
9 Mar 20:20:15 ActionQueueScrape.pl [31540 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
9 Mar 20:20:15 ActionQueueScrape.pl [31540 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
9 Mar 20:25:20 [31540 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
9 Mar 20:25:20 ActionQueueScrape.pl [31540 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
9 Mar 20:25:20 ActionQueueScrape.pl [31540 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
March 9 20:30:25 [31540 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
March 9 20:30:25 ActionQueueScrape.pl [31540 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
March 9 20:30:25 ActionQueueScrape.pl [31540 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
9 Mar 20:35:31 [31540 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
9 Mar 20:35:31 ActionQueueScrape.pl [31540 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
9 Mar 20:35:31 ActionQueueScrape.pl [31540 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
9 Mar 20:40:36 [31540 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
9 Mar 20:40:36 ActionQueueScrape.pl [31540 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
9 Mar 20:40:36 ActionQueueScrape.pl [31540 1 Swiss francs]: snort for reloading of data signaling IPReputation failed after two attempts to /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm line 1685.
9 Mar 20:40:36 ActionQueueScrape.pl [31540 1 Swiss francs]: END of TASK. a2812330-E633-11e5-955f-fcea001d157c | Synchronization of security intelligence from FirepowerManagementCenter. Initialization. 1521
9 Mar 20:40:36 ActionQueueScrape.pl [739 1 Swiss francs]: START of TASK. 2da341fc-E637-11e5-BE19-9427c10784de | Synchronize with UM. Sending update | 0
9 Mar 20:40:39 ActionQueueScrape.pl [739 1 Swiss francs]: update successfully pushed to UM 172.20.1.81 /usr/local/sf/lib/perl/5.10.1/SF/Synchronize/VerticalSync.pm line 396.
9 Mar 20:40:39 ActionQueueScrape.pl [739 1 Swiss francs]: END of TASK. 2da341fc-E637-11e5-BE19-9427c10784de | Synchronize with UM. Sending update | 3
9 Mar 20:41:19 ActionQueueScrape.pl [848 1 Swiss francs]: START of TASK. 46b61cc8-E637-11e5-99b6-75fc001d157c | Synchronization of security intelligence from FirepowerManagementCenter. Initialization. 0
9 Mar 20:41:19 ActionQueueScrape.pl [848 1 Swiss francs]: new IPReputation or files copied from nursery, necessary for the /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSync.pm 1760 line signal process.
March 9 20:46:19 ActionQueueScrape.pl [848 1 Swiss francs]: cannot read the answer:
March 9 20:46:19 ActionQueueScrape.pl [848 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
March 9 20:46:19 ActionQueueScrape.pl [848 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
9 Mar 20:51:24 ActionQueueScrape.pl [848 1 Swiss francs]: cannot read the answer:
9 Mar 20:51:24 ActionQueueScrape.pl [848 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
9 Mar 20:51:24 ActionQueueScrape.pl [848 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
9 Mar 20:56:29 ActionQueueScrape.pl [848 1 Swiss francs]: cannot read the answer:
9 Mar 20:56:29 ActionQueueScrape.pl [848 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
9 Mar 20:56:29 ActionQueueScrape.pl [848 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
Mar 9 21:01:35 ActionQueueScrape.pl [848 1 Swiss francs]: cannot read the answer:
Mar 9 21:01:35 ActionQueueScrape.pl [848 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
Mar 9 21:01:35 ActionQueueScrape.pl [848 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
Mar 9 21:06:40 ActionQueueScrape.pl [848 1 Swiss francs]: cannot read the answer:
Mar 9 21:06:40 ActionQueueScrape.pl [848 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
Mar 9 21:06:40 ActionQueueScrape.pl [848 1 Swiss francs]: snort for reloading of data signaling IPReputation failed after two attempts to /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm line 1685.
9 Mar 21:06:40 ActionQueueScrape.pl [848 1 Swiss francs]: END of TASK. 46b61cc8-E637-11e5-99b6-75fc001d157c | Synchronization of security intelligence from FirepowerManagementCenter. Initialization. 1521
On 9 March 21:07:25 [2669 1 Swiss francs] ActionQueueScrape.pl: TASK BEGINNING | ec20b238-e63a-11e5-9d0d-af0d011d157c | Synchronization of security intelligence from FirepowerManagementCenter. Initialization. 0
On 9 March 21:07:25 ActionQueueScrape.pl [2669 1 Swiss francs]: new IPReputation or files copied from nursery, necessary for the /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSync.pm 1760 line signal process.
On 9 March 21:07:39 ActionQueueScrape.pl [2699 1 Swiss francs]: START of TASK. f4f1391e-e63a-11e5-BE19-9427c10784de | Synchronize with UM. Sending update | 0
On 9 March 21:07:42 ActionQueueScrape.pl [2699 1 Swiss francs]: update successfully pushed to UM 172.20.1.81 /usr/local/sf/lib/perl/5.10.1/SF/Synchronize/VerticalSync.pm line 396.
On 9 March 21:07:42 ActionQueueScrape.pl [2699 1 Swiss francs]: END of TASK. f4f1391e-e63a-11e5-BE19-9427c10784de | Synchronize with UM. Sending update | 3
Mar 9 21:12:25 [2669 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
Mar 9 21:12:25 ActionQueueScrape.pl [2669 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
Mar 9 21:12:25 ActionQueueScrape.pl [2669 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
On 9 March 21:17:30 [2669 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
On 9 March 21:17:30 ActionQueueScrape.pl [2669 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
On 9 March 21:17:30 ActionQueueScrape.pl [2669 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
Mar 9 21:22:36 ActionQueueScrape.pl [2669 1 Swiss francs]: cannot read the answer:
Mar 9 21:22:36 ActionQueueScrape.pl [2669 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
Mar 9 21:22:36 ActionQueueScrape.pl [2669 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
Mar 9 21:27:41 1 ActionQueueScrape.pl Swiss francs [2669]: cannot read the answer:
Mar 9 21:27:41 1 ActionQueueScrape.pl Swiss francs [2669]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
Mar 9 21:27:41 ActionQueueScrape.pl [2669 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
March 9 21:32:46 1 ActionQueueScrape.pl Swiss francs [2669]: cannot read the answer:
March 9 21:32:46 1 ActionQueueScrape.pl Swiss francs [2669]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
March 9 21:32:46 ActionQueueScrape.pl [2669 1 Swiss francs]: snort for reloading of data signaling IPReputation failed after two attempts to /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm line 1685.
March 9 21:32:46 ActionQueueScrape.pl [2669 1 Swiss francs]: END of TASK. ec20b238-e63a-11e5-9d0d-af0d011d157c | Synchronization of security intelligence from FirepowerManagementCenter. Initialization. 1521
9 Mar 21:33:28 ActionQueueScrape.pl [4536 1 Swiss francs]: START of TASK. 9001d064-e63e-11e5-B733-7ba0001d157c | Synchronization of security intelligence from FirepowerManagementCenter. Initialization. 0
Mar 9 21:33:29 ActionQueueScrape.pl [4536 1 Swiss francs]: new IPReputation or files copied from nursery, necessary for the /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSync.pm 1760 line signal process.
9 Mar 21:33:42 ActionQueueScrape.pl [4574 1 Swiss francs]: START of TASK. 9869eda4-e63e-11e5-BE19-9427c10784de | Synchronize with UM. Sending update | 0
Mar 9 21:33:44 ActionQueueScrape.pl [4574 1 Swiss francs]: update successfully pushed to UM 172.20.1.81 /usr/local/sf/lib/perl/5.10.1/SF/Synchronize/VerticalSync.pm line 396.
9 Mar 21:33:44 ActionQueueScrape.pl [4574 1 Swiss francs]: END of TASK. 9869eda4-e63e-11e5-BE19-9427c10784de | Synchronize with UM. Sending update | 2
March 9 21:38:29 [4536 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
March 9 21:38:29 ActionQueueScrape.pl [4536 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
March 9 21:38:29 ActionQueueScrape.pl [4536 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
Mar 9 21:43:34 [4536 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
Mar 9 21:43:34 ActionQueueScrape.pl [4536 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
Mar 9 21:43:34 ActionQueueScrape.pl [4536 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
Mar 9 21:48:39 [4536 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
Mar 9 21:48:39 ActionQueueScrape.pl [4536 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
Mar 9 21:48:39 ActionQueueScrape.pl [4536 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
Mar 9 21:53:44 [4536 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
Mar 9 21:53:44 ActionQueueScrape.pl [4536 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
Mar 9 21:53:44 ActionQueueScrape.pl [4536 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
Mar 9 21:58:49 [4536 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
Mar 9 21:58:49 [4536 1 Swiss francs] ActionQueueScrape.pl: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
Mar 9 21:58:49 ActionQueueScrape.pl [4536 1 Swiss francs]: snort for reloading of data signaling IPReputation failed after two attempts to /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm line 1685.
9 Mar 21:58:49 ActionQueueScrape.pl [4536 1 Swiss francs]: END of TASK. 9001d064-e63e-11e5-B733-7ba0001d157c | Synchronization of security intelligence from FirepowerManagementCenter. Initialization. 1521
9 Mar 21:59:08 ActionQueueScrape.pl [6274 1 Swiss francs]: START of TASK. 257ed9b8-e642-11e5-9558-62b3001d157c | Synchronization of security intelligence from FirepowerManagementCenter. Initialization. 0
Mar 9 21:59:08 ActionQueueScrape.pl [6274 1 Swiss francs]: new IPReputation or files copied from nursery, necessary for the /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSync.pm 1760 line signal process.
9 Mar 21:59:45 ActionQueueScrape.pl [6334 1 Swiss francs]: START of TASK. 3be283d0-e642-11e5-BE19-9427c10784de | Synchronize with UM. Sending update | 0
Mar 9 21:59:47 ActionQueueScrape.pl [6334 1 Swiss francs]: update successfully pushed to UM 172.20.1.81 /usr/local/sf/lib/perl/5.10.1/SF/Synchronize/VerticalSync.pm line 396.
9 Mar 21:59:47 ActionQueueScrape.pl [6334 1 Swiss francs]: END of TASK. 3be283d0-e642-11e5-BE19-9427c10784de | Synchronize with UM. Sending update | 2
9 Mar 22:04:08 ActionQueueScrape.pl [6274 1 Swiss francs]: cannot read the answer:
9 Mar 22:04:08 ActionQueueScrape.pl [6274 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
9 Mar 22:04:08 ActionQueueScrape.pl [6274 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
9 Mar 22:09:13 ActionQueueScrape.pl [6274 1 Swiss francs]: cannot read the answer:
9 Mar 22:09:13 ActionQueueScrape.pl [6274 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
9 Mar 22:09:13 ActionQueueScrape.pl [6274 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
9 Mar 22:14:18 [6274 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
9 Mar 22:14:18 ActionQueueScrape.pl [6274 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
9 Mar 22:14:18 ActionQueueScrape.pl [6274 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
9 Mar 22:19:23 ActionQueueScrape.pl [6274 1 Swiss francs]: cannot read the answer:
9 Mar 22:19:23 ActionQueueScrape.pl [6274 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
9 Mar 22:19:23 ActionQueueScrape.pl [6274 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
9 Mar 22:24:28 [6274 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
9 Mar 22:24:28 ActionQueueScrape.pl [6274 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
9 Mar 22:24:28 ActionQueueScrape.pl [6274 1 Swiss francs]: snort for reloading of data signaling IPReputation failed after two attempts to /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm line 1685.
9 Mar 22:24:28 ActionQueueScrape.pl [6274 1 Swiss francs]: END of TASK. 257ed9b8-e642-11e5-9558-62b3001d157c | Synchronization of security intelligence from FirepowerManagementCenter. Initialization. 1520
9 Mar 22:24:47 [8015-1 Swiss francs] ActionQueueScrape.pl: TASK BEGINNING | bb89591c-E645-11e5-BE19-9427c10784de | Synchronize with UM. Sending update | 0
9 Mar 22:24:50 ActionQueueScrape.pl [8015-1 Swiss francs]: update successfully pushed to UM 172.20.1.81 /usr/local/sf/lib/perl/5.10.1/SF/Synchronize/VerticalSync.pm line 396.
9 Mar 22:24:50 ActionQueueScrape.pl [8015-1 Swiss francs]: END of TASK. bb89591c-E645-11e5-BE19-9427c10784de | Synchronize with UM. Sending update | 3
9 Mar 22:25:16 ActionQueueScrape.pl [8115 1 Swiss francs]: START of TASK. cc845a32-E645-11e5-A118-bfc4001d157c | Synchronization of security intelligence from FirepowerManagementCenter. Initialization. 0
Mar 9 22:25:17 ActionQueueScrape.pl [8115 1 Swiss francs]: new IPReputation or files copied from nursery, necessary for the /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSync.pm 1760 line signal process.
9 Mar 22:30:17 ActionQueueScrape.pl [8115 1 Swiss francs]: cannot read the answer:
9 Mar 22:30:17 ActionQueueScrape.pl [8115 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
9 Mar 22:30:17 ActionQueueScrape.pl [8115 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
9 Mar 22:35:22 [8115 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
9 Mar 22:35:22 ActionQueueScrape.pl [8115 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
9 Mar 22:35:22 ActionQueueScrape.pl [8115 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
9 Mar 22:40:27 [8115 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
9 Mar 22:40:27 ActionQueueScrape.pl [8115 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
9 Mar 22:40:27 ActionQueueScrape.pl [8115 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
9 Mar 22:45:32 [8115 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
9 Mar 22:45:32 ActionQueueScrape.pl [8115 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
9 Mar 22:45:32 ActionQueueScrape.pl [8115 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
9 Mar 22:50:37 [8115 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
9 Mar 22:50:37 ActionQueueScrape.pl [8115 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
9 Mar 22:50:37 ActionQueueScrape.pl [8115 1 Swiss francs]: snort for reloading of data signaling IPReputation failed after two attempts to /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm line 1685.
9 Mar 22:50:37 ActionQueueScrape.pl [8115 1 Swiss francs]: END of TASK. cc845a32-E645-11e5-A118-bfc4001d157c | Synchronization of security intelligence from FirepowerManagementCenter. Initialization. 1521
9 Mar 22:50:50 ActionQueueScrape.pl [9765 1 Swiss francs]: START of TASK. 5f045b48-e649-11e5-BE19-9427c10784de | Synchronize with UM. Sending update | 0
9 Mar 22:50:52 ActionQueueScrape.pl [9765 1 Swiss francs]: update successfully pushed to UM 172.20.1.81 /usr/local/sf/lib/perl/5.10.1/SF/Synchronize/VerticalSync.pm line 396.
9 Mar 22:50:52 ActionQueueScrape.pl [9765 1 Swiss francs]: END of TASK. 5f045b48-e649-11e5-BE19-9427c10784de | Synchronize with UM. Sending update | 2
9 Mar 22:51:25 ActionQueueScrape.pl [9873 1 Swiss francs]: START of TASK. 73a08dce-e649-11e5-89FA-34d6001d157c | Synchronization of security intelligence from FirepowerManagementCenter. Initialization. 0
9 Mar 22:51:25 ActionQueueScrape.pl [9873 1 Swiss francs]: new IPReputation or files copied from nursery, necessary for the /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSync.pm 1760 line signal process.
9 Mar 22:56:26 1 ActionQueueScrape.pl Swiss francs [9873]: cannot read the answer:
9 Mar 22:56:26 ActionQueueScrape.pl [9873 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
9 Mar 22:56:26 ActionQueueScrape.pl [9873 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
Mar 9 23:01:31 [9873 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
Mar 9 23:01:31 [9873 1 Swiss francs] ActionQueueScrape.pl: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
Mar 9 23:01:31 [9873 1 Swiss francs] ActionQueueScrape.pl: signalling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
Mar 9 23:06:36 ActionQueueScrape.pl [9873 1 Swiss francs]: cannot read the answer:
Mar 9 23:06:36 ActionQueueScrape.pl [9873 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
Mar 9 23:06:36 ActionQueueScrape.pl [9873 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
Mar 9 23:11:41 1 ActionQueueScrape.pl Swiss francs [9873]: cannot read the answer:
Mar 9 23:11:41 ActionQueueScrape.pl [9873 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
Mar 9 23:11:41 ActionQueueScrape.pl [9873 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
Mar 9 23:16:46 1 ActionQueueScrape.pl Swiss francs [9873]: cannot read the answer:
Mar 9 23:16:46 1 ActionQueueScrape.pl Swiss francs [9873]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
Mar 9 23:16:46 1 ActionQueueScrape.pl Swiss francs [9873]: snort for reloading of data signaling IPReputation failed after two attempts to /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm line 1685.
Mar 9 23:16:46 1 ActionQueueScrape.pl Swiss francs [9873]: END of TASK. 73a08dce-e649-11e5-89FA-34d6001d157c | Synchronization of security intelligence from FirepowerManagementCenter. Initialization. 1521
Mar 9 23:16:53 ActionQueueScrape.pl [11581 1 Swiss francs]: START of TASK. 028181bc-e64d-11e5-BE19-9427c10784de | Synchronize with UM. Sending update | 0
Mar 9 23:16:55 ActionQueueScrape.pl [11581 1 Swiss francs]: update successfully pushed to UM 172.20.1.81 /usr/local/sf/lib/perl/5.10.1/SF/Synchronize/VerticalSync.pm line 396.
Mar 9 23:16:55 ActionQueueScrape.pl [11581 1 Swiss francs]: END of TASK. 028181bc-e64d-11e5-BE19-9427c10784de | Synchronize with UM. Sending update | 2
Mar 9 23:17:30 ActionQueueScrape.pl [11690 1 Swiss francs]: START of TASK. 1843a868-e64d-11e5-ba33-88e7001d157c | Synchronization of security intelligence from FirepowerManagementCenter. Initialization. 0
Mar 9 23:17:30 ActionQueueScrape.pl [11690 1 Swiss francs]: new IPReputation or files copied from nursery, necessary for the /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSync.pm 1760 line signal process.
Mar 9 23:22:30 ActionQueueScrape.pl [11690 1 Swiss francs]: cannot read the answer:
Mar 9 23:22:30 ActionQueueScrape.pl [11690 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
Mar 9 23:22:30 ActionQueueScrape.pl [11690 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
Mar 9 23:27:35 [11690 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
Mar 9 23:27:35 ActionQueueScrape.pl [11690 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
Mar 9 23:27:35 ActionQueueScrape.pl [11690 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
Mar 9 23:32:41 1 ActionQueueScrape.pl Swiss francs [11690]: cannot read the answer:
Mar 9 23:32:41 1 ActionQueueScrape.pl Swiss francs [11690]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
Mar 9 23:32:41 ActionQueueScrape.pl [11690 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
Mar 9 23:37:46 1 ActionQueueScrape.pl Swiss francs [11690]: cannot read the answer:
Mar 9 23:37:46 1 ActionQueueScrape.pl Swiss francs [11690]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
Mar 9 23:37:46 ActionQueueScrape.pl [11690 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
Mar 9 23:42:51 [11690 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
Mar 9 23:42:51 [11690 1 Swiss francs] ActionQueueScrape.pl: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
Mar 9 23:42:51 ActionQueueScrape.pl [11690 1 Swiss francs]: snort for reloading of data signaling IPReputation failed after two attempts to /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm line 1685.
Mar 9 23:42:51 ActionQueueScrape.pl [11690 1 Swiss francs]: END of TASK. 1843a868-e64d-11e5-ba33-88e7001d157c | Synchronization of security intelligence from FirepowerManagementCenter. Initialization. 1521
Mar 9 23:42:56 ActionQueueScrape.pl [13328 1 Swiss francs]: START of TASK. a5fe2798-E650-11e5-BE19-9427c10784de | Synchronize with UM. Sending update | 0
Mar 9 23:42:57 ActionQueueScrape.pl [13328 1 Swiss francs]: update successfully pushed to UM 172.20.1.81 /usr/local/sf/lib/perl/5.10.1/SF/Synchronize/VerticalSync.pm line 396.
Mar 9 23:42:57 ActionQueueScrape.pl [13328 1 Swiss francs]: END of TASK. a5fe2798-E650-11e5-BE19-9427c10784de | Synchronize with UM. Sending update | 1
Mar 9 23:43:28 ActionQueueScrape.pl [13428 1 Swiss francs]: START of TASK. b8bf6e64-E650-11e5-ABC3-1af9001d157c | Synchronization of security intelligence from FirepowerManagementCenter. Initialization. 0
Mar 9 23:43:28 ActionQueueScrape.pl [13428 1 Swiss francs]: new IPReputation or files copied from nursery, necessary for the /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSync.pm 1760 line signal process.
Mar 9 23:48:28 [13428 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
Mar 9 23:48:28 ActionQueueScrape.pl [13428 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
Mar 9 23:48:28 ActionQueueScrape.pl [13428 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
Mar 9 23:53:33 [13428 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
Mar 9 23:53:33 ActionQueueScrape.pl [13428 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
Mar 9 23:53:33 ActionQueueScrape.pl [13428 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
Mar 9 23:58:38 [13428 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
Mar 9 23:58:38 ActionQueueScrape.pl [13428 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
Mar 9 23:58:38 ActionQueueScrape.pl [13428 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
Mar 10 00:03:43 ActionQueueScrape.pl [13428 1 Swiss francs]: cannot read the answer:
Mar 10 00:03:43 ActionQueueScrape.pl [13428 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
Mar 10 00:03:43 ActionQueueScrape.pl [13428 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
Mar 10 00:08:48 1 ActionQueueScrape.pl Swiss francs [13428]: cannot read the answer:
Mar 10 00:08:48 1 ActionQueueScrape.pl Swiss francs [13428]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
Mar 10 00:08:48 ActionQueueScrape.pl [13428 1 Swiss francs]: snort for reloading of data signaling IPReputation failed after two attempts to /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm line 1685.
Mar 10 00:08:48 ActionQueueScrape.pl [13428 1 Swiss francs]: END of TASK. b8bf6e64-E650-11e5-ABC3-1af9001d157c | Synchronization of security intelligence from FirepowerManagementCenter. Initialization. 1520
Mar 10 00:08:58 ActionQueueScrape.pl [15167 1 Swiss francs]: START of TASK. 49796e48-e654-11e5-BE19-9427c10784de | Synchronize with UM. Sending update | 0
Mar 10 00:09:01 ActionQueueScrape.pl [15167 1 Swiss francs]: update successfully pushed to UM 172.20.1.81 /usr/local/sf/lib/perl/5.10.1/SF/Synchronize/VerticalSync.pm line 396.
Mar 10 00:09:01 ActionQueueScrape.pl [15167 1 Swiss francs]: END of TASK. 49796e48-e654-11e5-BE19-9427c10784de | Synchronize with UM. Sending update | 3
Mar 10 00:09:06 ActionQueueScrape.pl [15229 1 Swiss francs]: START of TASK. 4d786788-e654-11e5-974f-710a011d157c | Synchronization of security intelligence from FirepowerManagementCenter. Initialization. 0
Mar 10 00:09:06 ActionQueueScrape.pl [15229 1 Swiss francs]: new IPReputation or files copied from nursery, necessary for the /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSync.pm 1760 line signal process.
Mar 10 00:14:06 1 ActionQueueScrape.pl Swiss francs [15229]: cannot read the answer:
Mar 10 00:14:06 ActionQueueScrape.pl [15229 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
Mar 10 00:14:06 ActionQueueScrape.pl [15229 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
Mar 10 00:19:11 ActionQueueScrape.pl [15229 1 Swiss francs]: cannot read the answer:
Mar 10 00:19:11 ActionQueueScrape.pl [15229 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
Mar 10 00:19:11 ActionQueueScrape.pl [15229 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
Mar 10 00:24:16 [15229 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
Mar 10 00:24:16 ActionQueueScrape.pl [15229 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
Mar 10 00:24:16 ActionQueueScrape.pl [15229 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
Mar 10 00:29:21 1 ActionQueueScrape.pl Swiss francs [15229]: cannot read the answer:
Mar 10 00:29:21 1 ActionQueueScrape.pl Swiss francs [15229]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
Mar 10 00:29:21 ActionQueueScrape.pl [15229 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
Mar 10 00:34:26 [15229 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
Mar 10 00:34:26 ActionQueueScrape.pl [15229 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
Mar 10 00:34:26 ActionQueueScrape.pl [15229 1 Swiss francs]: snort for reloading of data signaling IPReputation failed after two attempts to /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm line 1685.
Mar 10 00:34:26 ActionQueueScrape.pl [15229 1 Swiss francs]: END of TASK. 4d786788-e654-11e5-974f-710a011d157c | Synchronization of security intelligence from FirepowerManagementCenter. Initialization. 1520
Mar 10 00:34:44 ActionQueueScrape.pl [16915 1 Swiss francs]: START of TASK. e29624c4-e657-11e5-90b2-cb9c001d157c | Synchronization of security intelligence from FirepowerManagementCenter. Initialization. 0
Mar 10 00:34:45 ActionQueueScrape.pl [16915 1 Swiss francs]: new IPReputation or files copied from nursery, necessary for the /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSync.pm 1760 line signal process.
Mar 10 00:35:01 ActionQueueScrape.pl [16959 1 Swiss francs]: START of TASK. ecf68012-e657-11e5-BE19-9427c10784de | Synchronize with UM. Sending update | 0
Mar 10 00:35:04 ActionQueueScrape.pl [16959 1 Swiss francs]: update successfully pushed to UM 172.20.1.81 /usr/local/sf/lib/perl/5.10.1/SF/Synchronize/VerticalSync.pm line 396.
Mar 10 00:35:04 ActionQueueScrape.pl [16959 1 Swiss francs]: END of TASK. ecf68012-e657-11e5-BE19-9427c10784de | Synchronize with UM. Sending update | 3
Mar 10 00:39:45 [16915 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
Mar 10 00:39:45 ActionQueueScrape.pl [16915 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
Mar 10 00:39:45 ActionQueueScrape.pl [16915 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
Mar 10 00:44:50 [16915 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
Mar 10 00:44:50 ActionQueueScrape.pl [16915 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
Mar 10 00:44:50 ActionQueueScrape.pl [16915 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
Mar 10 00:49:55 [16915 1 Swiss francs] ActionQueueScrape.pl: failed to read the answer:
Mar 10 00:49:55 ActionQueueScrape.pl [16915 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
Mar 10 00:49:55 ActionQueueScrape.pl [16915 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
Mar 10 00:55:00 1 ActionQueueScrape.pl Swiss francs [16915]: cannot read the answer:
Mar 10 00:55:00 ActionQueueScrape.pl [16915 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
Mar 10 00:55:00 ActionQueueScrape.pl [16915 1 Swiss francs]: signaling snort to reload the data of IPReputation failed, retrying... on line /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm 1662.
Mar 10 01:00:05 ActionQueueScrape.pl [16915 1 Swiss francs]: cannot read the answer:
Mar 10 01:00:05 ActionQueueScrape.pl [16915 1 Swiss francs]: (IPRepReload) command to 10229112-d54f-11e5-8c17-73403b7b4bc7 instance 1 failed at line /usr/local/sf/lib/perl/5.10.1/SF/Snort/Control.pm 49.
Mar 10 01:00:05 ActionQueueScrape.pl [16915 1 Swiss francs]: snort for reloading of data signaling IPReputation failed after two attempts to /usr/local/sf/lib/perl/5.10.1/SF/IPReputation/IPRepSupport.pm line 1685.
Mar 10 01:00:05 ActionQueueScrape.pl [16915 1 Swiss francs]: END of TASK. e29624c4-e657-11e5-90b2-cb9c001d157c | Synchronization of security intelligence from FirepowerManagementCenter. Initialization. 1521
Mar 10 01:01:04 ActionQueueScrape.pl [18650 1 Swiss francs]: START of TASK. 9070d23a-e65b-11e5-BE19-9427c10784de | Synchronize with UM. Sending update | 0
Mar 10 01:01:07 ActionQueueScrape.pl [18650 1 Swiss francs]: update successfully pushed to UM 172.20.1.81 /usr/local/sf/lib/perl/5.10.1/SF/Synchronize/VerticalSync.pm line 396.
Mar 10 01:01:07 ActionQueueScrape.pl [18650 1 Swiss francs]: END of TASK. 9070d23a-e65b-11e5-BE19-9427c10784de | Synchronize with UM. Sending update | 3
..............If I was the one to help me I would like to in the sense of the Cisco TAC. Do you have one tips other than that? :)
6.0.0.1 bleeding edge new. Can return you to 5.4.0.6?
If Yes, you will need to open a case with Cisco TAC and advance in the process of bug, which could take many months.
-
power of fire blocking all traffic
Hello guys
Well, I bought cisco asa 5506-x with power module of fire and the license for url filtering, control and AMP... and I'm really lost, I mean im new to these devices
so I googled how to set up such a device, it works now, but when I redirect traffic to firepower, it blocks all traffic types
so please guys help me with this thing :/Hi Alain.
I first recommend that you reach a re-seller/Integrator Cisco to get that deployed properly. Make sure you only request a transfer of knowledge too! :)
Otherwise, you can view the configuration guides:
You can also configure ASA to redirect traffic to the Sourcefire IDS sensor only in mode. This way don't actually block you all traffic:
sfr fail-open monitor-only
http://www.Cisco.com/c/en/us/support/docs/security/ASA-firepower-services/118644-configure-firepower-00.html thank you for the useful job evaluation! -
How to block all traffic except vpn traffic and traffic bureau HQ
Hello
Someone please advise me how to block all traffic except inbound traffic through the VPN and traffic from the IP of the HQ Office.
My router is 881/K9 Cisco router. Currently, I have blocked all IP addresses with the exception of the IP Office HQ using access-list on the brance office website.
I put the IP list allowed according to IP location of the VPN user. But now the VPN user become more and more and thus be difficult to block the IPs based on their current location. Sometimes not possible to know their WAN ip address.
Thanks in advance.
Have you considered allowing the IPSEC IP Protocol, TCP port, intellectual property all UDP ports and then by blocking all other traffic?
-
ACL, blocking outbound traffic
I play with an ACL and I don't understand why it does not work.
Note access-list 105 blocking traffic going 2 internet
access-list 105 allow ip 10.1.0.0 0.0.0.255 any what newspaper
access-list 105 allow ip 172.16.0.0 0.0.0.255 any what newspaper
access-list 105 tcp refuse any any eq newspaper 3389
The 1st two lines that our internal netowrk and VPN users réécrirait in internet. The 3rd line blocks then use Remote desktop out to the internet. I know there is an implicit refusal at the end of the ACL, but because I said that the 2 allowed statements I thought would pass it two internal networks. THEY ARE EFFECTIVELY BLOCKED.
Now when I do this:
Note access-list 105 blocking traffic going 2 internet
access-list 105 allow ip 10.1.0.0 0.0.0.255 any what newspaper
access-list 105 allow ip 172.16.0.0 0.0.0.255 any what newspaper
access-list 105 tcp refuse any any eq newspaper 3389
access-list 105 permit ip any any newspaper
Everthing works great. Why? Also when I do a sh-access list I never see all counters on the 1st 2 lines in the ACL. Did I miss something on the way to work ACL?
Del
Thanks for posting the information. It is very useful. It clearly shows that the problem is the length of the mask in the access list.
Jackko and I asked if 10.1.0.x network that allows the access list was the person must be allowed. Log entries clearly show that the source address is 10.1.35.x/24 and not 10.1.0.x.
I see two possible solutions:
-You can change the access list so that the list of access mask is 0.0.255.255 instead of 0.0.0.255. This will allow no matter what 10.1
-You can add additional entries to the list with 0.0.0.255 masks for specific subnets you want to allow.
You will need to decide which solution is best for the particular environment you are in.
HTH
Rick
-
Fire power Cisco not be able to block torrent traffic
Hello, I'm testing a Cisco ASA 5515 x with firepower (IPS, AMP, licenses of URL filtering). I created and implemented an access control strategy. The traffic of the L3 - L4 moment in our Organization is blocked by Firewall ASA. With SFR module I want to block Skype, Teamviewer, Torrent and intrusions from the Internet.
My IPS policy is applied to the rule of Inspection of the threat which is the last rule in the policy of the CA. What I understand all traffic will be allowed, if it will be accepted by the IPS policies and AMP. The problem is that if I disable rule number 8 (Torrent of deny), then I can download torrent files and I am able to download torrent using Utorrent application content, but I think that this traffic should be removed by IPS policy. If I activate the rule number 8, download the torrent file is prohibited but not all torrent traffic fell (continue some of my torrents in Utorrent to download). I thought that IPS policy that is attached to the rule of Inspection of the threat will block all traffic that matches the IPS policy because the traffic of the intrusion. When I check the events I see that result Inline for the torrent traffic "fell". Why am I able to download torrents in Utorrent?
Hello team,
IPS and policy file will take part in the inspection. In your case, we look at detailed AC and political intrusion policies configured. Could you please open a TAC request to look at even.
Concerning
Jetsy
-
PIX stops passing all traffic at the entrance to command crypto
I have a strange problem with a PIX 515 6.1 (2).
I have 3 VPN tunnels already implemented. While trying to set up a 4th the PIX stops passing all traffic. He arrives precisely when I enter ANY command "crypto map.
cancellation of the order by using "no card crypto...". ' or "clear xlate" is no help either. The PIX must be restarted before the traffic going on again. The CPU usage drops to zero and my telnet for the PIX session remains connected.
Anyone have any ideas?
I put the relevant configuration below:
172.50.0.0 IP Access-list sheep 255.255.0.0 allow 192.168.0.0 255.255.0.0
172.50.0.0 IP Access-list sheep 255.255.0.0 allow 10.0.0.0 255.0.0.0
acl_vpn1 ip 172.50.0.0 access list allow 255.255.255.0 192.168.0.0 255.255.0.0
acl_vpn2 ip 172.50.0.0 access list allow 255.255.255.0 10.0.0.0 255.255.255.0
acl_vpn3 ip 172.50.0.0 access list allow 255.255.255.0 10.50.0.0 255.255.255.0
NAT (inside) 0 access-list sheep
Permitted connection ipsec sysopt
No sysopt route dnat
Crypto ipsec transform-set esp - esp-md5-hmac support
toVPNs 10 ipsec-isakmp crypto map
card crypto toVPNs 10 correspondence address acl_vpn1
card crypto toVPNs 10 peers set 1xx.xxx.xxx.xxx
support toVPNs 10 transform-set card crypto
toVPNs 12 ipsec-isakmp crypto map
card crypto toVPNs 12 match address acl_vpn2
card crypto toVPNs 12 peers set 2xx.xxx.xxx.xxx
support toVPNs 12 transform-set card crypto
toVPNs 14 ipsec-isakmp crypto map
card crypto toVPNs 14 correspondence address acl_vpn3
card crypto toVPNs 14 peers set 3xx.xxx.xxx.xxx
support toVPNs 14 transform-set card crypto
toVPNs interface card crypto outside
ISAKMP allows outside
ISAKMP key * address 1xx.xxx.xxx.xxx netmask 255.255.255.255
ISAKMP key * address 2xx.xxx.xxx.xxx netmask 255.255.255.255
ISAKMP key * address 3xx.xxx.xxx.xxx netmask 255.255.255.255
part of pre authentication ISAKMP policy 1
of ISAKMP policy 1 encryption
ISAKMP policy 1 md5 hash
1 1 ISAKMP policy group
ISAKMP policy 1 life 43200
Hi Ishaq,
Please make sure you remove the card "Crypto" off the coast of the Interface by doing a ' no card crypto toVPNs no interface out ' and then add the necessary commands before reconnecting the Crypto map. Usually when we add a new command "toVPNs xx ipsec-isakmp crypto map" without removing the Crypto Card it starts encrypt all traffic passing through the PIX. After you make the required changes, reapply card Cryptography.
Hope this helps,
Kind regards
Abdelouahed
-=-=-
-
Try to send all traffic over VPN
Hello
I have a Cisco 871 router on my home cable modem connection. I am trying to set up a VPN, and I want to send all traffic over the VPN from connected clients (no split tunnel).
I can connect to the VPN and I can ping/access resources on my home LAN when I'm remote but access to the internet channels.
If its possible I would have 2 Configuration of profiles according to connection 1 connection sends all traffic to the vpn and the connection on the other split tunneling but for now, I'd be happy with everything just all traffic go via the VPN.
Here is my config.
10.10.10.xxx is my home network inside LAN
10.10.20.xxx is the IP range assigned when connecting to the VPN
FastEthernet4 is my WAN interface.
Kernel #show run
Building configuration...Current configuration: 4981 bytes
!
version 12.4
service configuration
no service button
tcp KeepAlive-component snap-in service
a tcp-KeepAlive-quick service
horodateurs service debug datetime localtime show-timezone msec
Log service timestamps datetime localtime show-timezone msec
encryption password service
sequence numbers service
!
hostname-Core
!
boot-start-marker
boot-end-marker
!
Security of authentication failure rate 3 log
Passwords security min-length 6
forest-meter operation of syslog messages
no set record in buffered memory
enable secret 5 XXXXX
!
AAA new-model
!
!
AAA authentication login default local
AAA authentication login ciscocp_vpn_xauth_ml_1 local
AAA authorization exec default local
AAA authorization ciscocp_vpn_group_ml_1 LAN
!
!
AAA - the id of the joint session
!
Crypto pki trustpoint Core_Certificate
enrollment selfsigned
Serial number no
IP address no
crl revocation checking
rsakeypair 512 Core_Certificate_RSAKey
!
!
string Core_Certificate crypto pki certificates
certificate self-signed 01
XXXXXXXXXXXXXXXXXXXXXXXXXXXXX
quit smoking
dot11 syslog
no ip source route
!
!
!
!
IP cef
no ip bootp Server
name of the IP-server 75.75.75.75
name of the IP-server 75.75.76.76
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
!
!
!
password username privilege 15 7 XXXXXXXXXXXXX XXXXXXXX
username secret privilege 15 XXXXXXXX XXXXXXXXXXXXX 5
!
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
!
crypto ISAKMP client configuration main group
key to XXXXXXX
DNS 75.75.75.75 75.75.76.76
pool SDM_POOL_3
Max-users 5
netmask 255.255.255.0
ISAKMP crypto ciscocp-ike-profile-1 profile
main group identity match
client authentication list ciscocp_vpn_xauth_ml_1
ISAKMP authorization list ciscocp_vpn_group_ml_1
client configuration address respond
virtual-model 1
!
!
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
!
Profile of crypto ipsec CiscoCP_Profile1
game of transformation-ESP-3DES-SHA
set of isakmp - profile ciscocp-ike-profile-1
!
!
Crypto ctcp port 64444
Archives
The config log
hidekeys
!
!
synwait-time of tcp IP 10
property intellectual ssh time 60
property intellectual ssh authentication-2 retries
property intellectual ssh version 1
!
!
!
Null0 interface
no ip unreachable
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface FastEthernet4
Description $ETH - WAN$ $FW_OUTSIDE$
address IP dhcp client id FastEthernet4
no ip redirection
no ip unreachable
no ip proxy-arp
penetration of the IP stream
NAT outside IP
IP virtual-reassembly
automatic duplex
automatic speed
!
type of interface virtual-Template1 tunnel
Description $FW_INSIDE$
IP unnumbered FastEthernet4
no ip redirection
no ip unreachable
no ip proxy-arp
penetration of the IP stream
ipv4 ipsec tunnel mode
Tunnel CiscoCP_Profile1 ipsec protection profile
!
interface Vlan1
Description $FW_INSIDE$
IP 10.10.10.1 255.255.255.0
no ip redirection
no ip unreachable
no ip proxy-arp
penetration of the IP stream
IP nat inside
IP virtual-reassembly
!
local IP SDM_POOL_1 10.10.30.10 pool 10.10.30.15
local IP SDM_POOL_2 10.10.10.80 pool 10.10.10.85
local IP SDM_POOL_3 10.10.20.10 pool 10.10.20.15
IP forward-Protocol ND
IP route 0.0.0.0 0.0.0.0 permanent FastEthernet4
IP http server
access-class 2 IP http
local IP http authentication
no ip http secure server
!
!
the IP nat inside source 1 list the interface FastEthernet4 overload
!
Note category of access list 1 = 2 CCP_ACL
access-list 1 permit 10.10.5.0 0.0.0.255
access-list 1 permit 10.10.10.0 0.0.0.255
access-list 2 Note HTTP access class
Note access-list category 2 CCP_ACL = 1
access-list 2 allow 10.10.10.0 0.0.0.255
access-list 2 refuse any
not run cdp!
!
!
!
!
control plan
!
connection of the banner ^ CThis is a private router and all access is controlled and connected. ^ C
!
Line con 0
no activation of the modem
telnet output transport
line to 0
telnet output transport
line vty 0 4
access-class 2
entry ssh transport
!
max-task-time 5000 Planner
Scheduler allocate 4000 1000
Scheduler interval 500
endKernel #.
Thanks for your help!
Hi Joseph,.
You need a configuration like this:
customer pool: 10.10.20.0
local networkbehind router: 10.10.10.0
R (config) #ip - list extended access 101
R (config-ext-nacl) 10.10.20.0 ip #deny 0.0.0.255 10.10.10.0 0.0.0.255
R (config-ext-nacl) 10.10.20.0 ip #permit 0.0.0.255 anytype of interface virtual-Template1 tunnel
Description $FW_INSIDE$
political IP VPN route mapR (config) #ip - list extended access 103
R (config-ext-nacl) #permit ip all 10.10.20.0 0.0.0.255R (config) #route - map allowed VPN 10
Ip address of R #match (config-route-map) 101
R (config-route-map) #set interface loopback1
R (config) #route - map allowed VPN 20
Ip address of R #match (config-route-map) 103
R (config-route-map) #set interface loopback1You must now exonerated NAT for VPN traffic:
===================================
R (config) #ip - 102 extended access list
R #deny (config-ext-nacl) ip 10.10.10.0 0.0.0.255 10.10.20.0 0.0.0.255
R (config-ext-nacl) 10.10.10.0 ip #permit 0.0.0.255 any
R (config-ext-nacl) 10.10.20.0 ip #deny 0.0.0.255 10.10.10.0 0.0.0.255
R (config-ext-nacl) 10.10.20.0 ip #permit 0.0.0.255 anyoverload of IP nat inside source list 102 interface FastEthernet4
Let me know if this can help,
See you soon,.
Christian V
-
Once a document is printed the State remains 'impression' block all others. Its a 8600 Pro more
Hi can anyone help please?
I print with an inkjet Office pro more than 8600. It is connected to a Mac OS X Version 10.7.5 (via a USB key).
After that a document will print the status remains as "printing" block all other jobs in the queue. Once I have remove the next task work prints, but the same thing happens it is to say after the document is printed, status remains the 'Impression' blocking the next task etc..
I disconnected and then reconnected the printer but without success.
Help
Gokearne
Download and install this: http://support.apple.com/kb/DL907
Restart your Mac.
Reset the printing system:
-Go to System Preferences > print & Scan
-Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - This will remove ALL your printers!
-Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks. -
While on internet, set Windows Firewall to 'block all '.
Original title: Firewall Windows 'block all '.
With the help of windows Firewall in Win7.
Is there a way to easily set the firewall to 'Block All' (comings and goings) activity while I'm connected to the internet.
I'm used to the use of 3rd party firewall and some have the choice of check "block all activity" on a right click of the icon 'taskbar '.
I will use if go to leave the PC while on the net for more then a few seconds.
I ask because firewalls 3rd party having this option does not work well with windows7.
I don't want a process such as the control panel / advanced settings/unnecessary procedures / make / do that / go away/come back / freeze the system.
Then having to do it all again in reverse to be reconnected.
A simple one click / two click process that works.
Anyone?
Hello
Thank you to provide us with an opportunity to help Microsoft Community, we are happy to help you.
A firewall can help prevent hackers or malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers.
If you want to block all connections using the Windows Firewall, please follow the steps mentioned below.
- Open the start menu.
- In the search box, search for "Windows Firewall".
- In the search results, select "Firewall with Advanced Security Windows".
- In the 'Présentation' section, check to see which profile is active. By default, it should 'private profile '.
- Click on the link marked "Windows Firewall properties.
- Select the tab 'private profile '.
- Make sure that "Firewall State" is set to "on (recommended)."
- Under "Incoming connections" click the menu drop down and select "Block all connections."
- Under "Outbound connections" click the menu drop down and select "block".
- Next to "Protected network connections", click on the button "Customize".
- Make sure all of the checkboxes are marked, especially 'Connection to the Local network' and 'Wireless network connection' (as appropriate).
- Click on the OK"" button. Closing this dialog box, click on the 'OK' button on the next dialog box.
For more information, please see the link below.
Windows Firewall with Advanced Security Properties Page
Hope that the information provided is useful. Keep us updated on the State of the question, so that we can help you further.
-
ACLs on Cisco router - block outside traffic, allow all inside
Hello
I am creating the ACL on the router Cisco that will allow all traffic within internet and don't allow specific traffic on the internet inside.
This is what I have configured and puted on the interface of the router connected to the ISP:
10 permits all icmp (411 matches)
20 permit tcp "my public IP address" no matter what eq 3389 (46400 matches)
30 permit tcp "my public IP address" no matter what eq 22 (9185 matches)
40 "my public IP address" ip allow match any (3207)
50 permit tcp any any eq smtp (11 matches)
60 permit tcp any any eq www (56 matches)
70 permit tcp any any eq 443 (29 items)
80 permit tcp any any eq field (5 matches)
allowed 81 UDP everything no matter what field of eq (7 matches)
allowed 82 UDP any eq (10564 matches) field
83 permit tcp any what eq field everything (10 matches)
90 permit udp any any eq ntp (13317 matches)
95 permit tcp 192.168.0.0 0.0.0.255 anyDialer interface 1
IP Access-group 101 IN
So I can connect to my public IP to the LAN of the customer via RDP and SSH (which is OK), but users of the client cannot access Internet (which is not OK.)!
Users are all in the same Vlan. Between the interface Vlan and outside interface (dialer 1) Pat.
There is no other ALC on the router except for PAT.
What I'm missing here?
Thank you.
Is this why 192.168.0.0/24 is present in the list of ACL 101? What is the remote subnet that you connect to port 3389?
If your local subnet interior is a soldier of the C class, it must be your global external address you want to add to the ACL 101.
Better yet, run an IPSec tunnel between the sites.
-
RV110W blocks all incoming traffic
I have a RV110W which is in service in December 2012. Everything works fine except for every month or if the firewall starts to block all incoming traffic. It does not meet the administrative access remotely. If I reboot the firewall (pwr off / on) everything works fine for the next month and then it starts to block all incoming traffic again. Local Internet access and VPN Tunnel are not affected. When it works, all my rules and port forwarding work properly. Anyone seen this before?
Hi David,
Please call the Small Business Support Center and speak with an engineer. The phone numbers for the support center can be found here: https://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
Kind regards
Cindy Toy
Cisco Small Business Community Manager
for Cisco Small Business products
www.Cisco.com/go/smallbizsupport
Twitter: CiscoSBsupport -
ASA - Tunnel all traffic, allow rays to communicate with each other
Well, I hope someone can help me with this headache! Switching to employ a PIX and VPN 3005 concentrator Office at home in an ASA5510 for firewall and IPSEC tunnels. It is pretty much a
- VPN on a stick, multiple rays.
- All traffic sent by tunnel
- Internet access through main office (using the web filter) of
- VOIP to VOIP between rays
- All departments are using the clients VPN 3005 HW or ASA 5505 s
HEADQUARTERS: 10.0.0.0/24
Speaks 1: 192.168.11.0 / 24
Speaks 2: 192.168.12.0 / 24
Speaks 3: 192.168.13.0 / 24
-continues to 192.168.31.0 / 24
Spoke with the current configuration, 1 can communicate with all the resources in the home, office and Internet integrated properly checked by a tracert. However, the rays cannot communicate with each other. This is required for VOIP traffic, when all TALK TALK calls are made (sites).
Logging information when talk of talks initiated icmp:
- No group of translation found for icmp src, dst outside: 192.168.31.1 inside: 192.168.11.1 (type 8, code 0)
If I remove the nat (outside) 1 192.168.0.0 255.255.00 - rays will begin to respond to each other, but then the rays cannot tunnel through the Home Office Internet traffic. My brain is so scrambled after the cramming of VPN configurations for these days, so I hope someone has an idea. I've always used concentrators 3005, so it's a little different! In the search for documentation for this configuration, I was surprised that this isn't a most common topology. It seems that this article would (http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00805734ae.shtml), but there is no rays! In any case, I'm sure this has something to do with NAT rules and perhaps who need access for traffic list speaks of talking.
=============================================
ASA Version 8.2 (1)
!
hostname asa5510interface Ethernet0/0
Speed 100
full duplex
nameif outside
security-level 0
IP address 97.65.x.x 255.255.255.224interface Ethernet0/1
Speed 100
full duplex
nameif inside
security-level 100
IP 10.0.0.40 255.255.0.0permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
the DM_INLINE_NETWORK_1 object-group network
object-network 10.0.0.0 255.255.0.0object-network 192.168.0.0 255.255.0.0
access-list sheep extended ip 10.0.0.0 allow 255.255.0.0 192.168.0.0 255.255.0.0
Allow Access-list extended wccp servers ip host 10.0.0.83 a
Redirect traffic extended access-list deny ip any object-group DM_INLINE_NETWORK_1
Redirect traffic scope permitted any one ip access-list
Global 1 interface (outside)
NAT (outside) 1 192.168.0.0 255.255.0.0
NAT (inside) 0 access-list sheep
NAT (inside) 1 10.0.0.0 255.255.0.0Route outside 0.0.0.0 0.0.0.0 97.65.x.x 1
Route inside 192.168.0.0 255.255.255.0 10.0.0.1 1
Route inside 192.168.2.0 255.255.255.0 10.0.0.1 1
Route inside 192.168.3.0 255.255.255.0 10.0.0.1 1Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto ipsec df - bit clear-df outdoorsCrypto-map dynamic dynmap 1 transform-set RIGHT
map mymap 65535-isakmp ipsec crypto dynamic dynmap
mymap outside crypto map interface
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 5
preshared authentication
3des encryption
sha hash
Group 2
life 86400crypto ISAKMP policy 10
preshared authentication
3des encryption
md5 hash
Group 2
life 86400crypto ISAKMP ipsec-over-tcp port 10000
management-access inside
a basic threat threat detection
no statistical access list - a threat detection
no statistical threat detection tcp-interceptionWCCP web cache redirect-list Redirect-traffic group-list password xxxxxxx wccp-servers
WCCP 90 redirect-list traffic Redirect wccp servers group-list password xxxxxxxWebVPN
internal MJHIvpn group strategy
attributes of Group Policy MJHIvpn
value of server WINS 10.0.10.1 10.0.10.2
value of 10.0.10.1 DNS server 10.0.10.2
allow password-storage
Split-tunnel-policy tunnelall
mjhi.local value by default-field
allow to NEMusername field-3002 SjfS1Pq2xZGxHicx encrypted password
attributes of username field-3002
VPN-access-hour no
VPN - 250 simultaneous connections
VPN-idle-timeout no
VPN-session-timeout no
Protocol-tunnel-VPN IPSec
allow password-storage
type of remote access serviceremote access to field tunnel-group type
General-field tunnel-group attributes
Group Policy - by default-MJHIvpnIPSec-attributes of tunnel-group field
pre-shared-key *.class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
inspect the they
inspect the icmp
!
global service-policy global_policyHello Ala,
In Act got to be with the Nat configuration.
So basically you want to tunnel the traffic on the rays to communicate with each other.
OK, it would be with a nat 0 with the access list with the corresponding traffic outside.
Also on the crypto ACL for each site configuration, you must add an entry for the traffic of other offices.
I hope that I have explained myself.
Have a good
Julio
Note all useful posts!
-
traffic VPN to the ACL control? on 8.4 ASA
siteA 10.10.10.1/24---s2s---siteB 12.10.10.1/24
How to control traffic entering from a remote site (ipsec site-to-site) as how to block certain services/ip addresses ad cetera?
I tried to follow it to see what is the interface encrypted traffic comes to to filter... but I see no matches on the outside.
on which interface apply the access list?
Basically, you can do two things-
(1) filter, VPN
2) block at the source
allows that you want to block port 80 from site A - then applies ACLs on the inside of the interface in the direction. or use vpn to site B filter.
Thank you
Ajay
-
Hello
I need access to a different VIRTUAL LAN for TFTP traffic. So I ve created an ACL like this:
permit udp 192.168.30.0 0.0.0.255 host 192.168.40.10 eq tftp
I add this ACL to source (192.168.30.0) as INCOMING interface.
The request to the tftp server tftp is established and the tftp server responds with a random port for file transfer.
Here´s the problem. Because of the random port ACL blocks the transfer of files.
Any idea?
Grettings,
Rouven
Hi Ganesh,
Windows 2003, on which the tftp server resides, use the range 1025 to 5000 as ephemeral ports. So I´ve decited to use the following acl:
permit udp 192.168.30.0 0.0.0.255 host 192.168.40.10 range 1025 5000
permit udp 192.168.30.0 0.0.0.255 host 192.168.40.10 eq tftp
This has the drawback you´ve already said. But actually I see no other way to solve the problem.
Thank you for your support!
Greetings,
Rouven
Hi Rouven,
As I said earlier, too, we need allow the transfer of data ports for tftp coming dynamically by the client and the server, depending on the traffic flow, try the following ACLs and share results
permit udp 192.168.30.0 0.0.0.255 host 192.168.40.10 eq tftp
permit udp 192.168.30.0 0.0.0.255 lytic 192.168.40.10 1025-5000Hope to help!
Ganesh.H
Don't forget to note the useful message
Maybe you are looking for
-
Required more basic info - software updates for Tecra A4
IV' e downloaded some software updates for my Tecra A4, but they all seem to have lack of basic information. Where the .txt files simple that shows the history of the files? Similar improvements have occurred? Or what bug fixes? Or is this installed
-
WHERE THE LIST OF BLOCKED SENDERS?
I WANT TO DELETE SOME
-
How will I know if I have the latest update on the Bing toolbar now I just installed yesterday?
I just installed Bing bar. Now in my Microsoft Updates, it tells me that I have to download an update for it. I thought I just did. Where can I find out if I have the update? It was installed through Microsoft Updates.
-
How can I copy outlook contacts on my phone to outlook windows 1 2 or gmail contacts
Hello I have Windows 7 HTC phone when I worked for Microsoft. I had over 2000 contacts on my vision of the 1. Then I went to another agency. All contacts are on my windows phone. But now, I joined another organization. I have 2 Outlook set up on my p
-
Home page of Web site in disarray
I finished updating my website and downloaded the files on the server of GoDaddy and low and this is my home page and index do not display property. The other pages (about, contact and services) show up fine and my links work. They look fine when I p