Degraded data please help im know if everything lost

Similar Questions

• looking for mixidj when I opened the second tab please help me ive tried everything I know

  My browsers opens OK for fire fox but when I opened a second search of mixi dj tab opens tried AFAIK I don't even find on my computer to uninstall it please help me if you can

  I've used about: config before but never knew it was editable until that time. Thanks for the help.

• BlackBerry smartphones wipe all my data PLEASE HELP

  I tried to back up my phone with the blackberry desktop manager. I continued my password (I couldn't remember exactly what it was, I went online and to reset to the last attempt). I received the confirmation email that it has been reset, so I returned the new reset password. He said it was bad anyway and started wiping my device. EVERYTHING - all my contacts, all my sms, all my work, all emails. I jumped the battery when he was about 6% of the wiping process, but every time I got back on it starts wiping again. Please please please help me, how can I stop this? It's my phone, I have entered the correct password, I wanted to just back up my data and now I lose everything instead. Please help I have no idea who to call or where to go.

  Here is some info:

  http://BTSC.webapps.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB25063

  Page 14

  http://docs.BlackBerry.com/en/smartphone_users/deliverables/25584/BlackBerry_Protect-User_Guide--105...

• Sort data please help

  That's what I'm trying to do. I have a file periodic_chan3.bin which is sampled values of three channels of periodic signals in interlaced format. The data is stored in binary format (long of floating point of the double procession) DBL and big-endian representation. I am reading the file and draw all the three waveforms on the graph of a waveform. The data has been saved from time zero, with a sampling frequency of 100 samples per second. Then I scale the x-axis of your waveform graph so it displays the time in seconds.

  So I try, on the wave of the chart to create three sets of cursors and cursors to display the average value of each of the three waveforms. The color of the cursor Y for a given signal average must match the color of the display of the waveform on the chart. For example if the graph of the signal is displayed in red the cursor there shows the average of this signal must be red.

  What happens when I do not open the file I see a white contour mesh a sine graph, a graphical square and sawtooth chart. I can't seem to trace the three waveforms seen clearly with the three above-mentioned distinct colors. I can't seem to sort correctly and represented as mentioned above.

  I would also help with the calculation of the average or expected from each of the three periodic waveforms.

  Attached are the files please help. Pgm4 is the VI, and periodic_chan3 contains the data that needs to be sorted.  I'd be very happy if somene were able to fix the and submit the changes so I can see how it works. Thank you.

  Edit: I get an error that says periodic_chan4.bin "is not a valid extension of an attachment" so I'm not able to uplad it. Is there a way to othe I could download it?

  Xtasy26,

  In your post you mention that you try to view 3 averages of waveform, however your code is showing that you are broadcast 4 values. This might be the reason why your getting the different forms of data. Instead of an array of all the waveforms 1, then a table of all 2 waveforms and a waveform table 3, you get a mix of all three in each of your waveforms.

  To calculate a moving average or mean that it is actually an integrated in the example in BT sound finder called "running Avereage.vi calculation"

  You can also view the attachment to see Multiple waveforms channel displayed on a single chart.

• BlackBerry 8330 Smartphones do not push my GMAILS on the phone? something is wrong - please help - I've tried everything!

  PROBLEM: My 8330 don't push my gmails on the phone. I get messages from 1 of 4 pushed towards the phone. I have re-sent service books, I deleted and added gmail to my bb (thru BIS). I deleted the gmail off my outloook as well from my PC.

  I downloaded GMAIL to Google blckberry and that works, but I like my gmail to combine in my Inbox.

  I need a blackberry on this expert help.

  Support VERIZON was not able to solve this problem.

  In ADDITION the filter of gmail for duplicate messages does not work on my blackberry, which means that the messages I send on gmail.com or my BB back immediately as duplicates.

  I got 10 blackberry so I am not novice, Please HELP!

  It's so frustrating!

  Thank you in advance!

  Helfy

  I'll try what you did... entirely delete the account of the BIS Gmail account.

  - Then on your BB, Options > Advanced > Service books. Remove ALL instances of your Gmail email account there.

  -With the BlackBerry device powered time, remove the battery a few seconds and then reinsert the battery to restart.

  -Then add the Gmail account to your configuration of BIS. And click on send Service directories while you're there.

  HOWEVER, I would do nothing of this earlier, as there are currently this morning a RIM BIS account integration power outage, or downtime. Wait a few hours until that which is cleared up.

  http://www.BlackBerryForums.com/network-outages-powered-dataoutages-com/161236-rim-bis-account-Integ...

• Please help I have tried everything I know which I admit is limited!

  I have 2 toshiba computers laptops one vista 7 in the other window. Recently, my wireless connection went down (AOL) on two laptops and they sent a new router (huawei echolife). My windows 7 to connect s easily, but one of vista will not > I got it running on the friend home network but not at home. Ive had it connected to a pc store, but still no joy at home! Any help would be welcome! Thank you!

  Hello

  If your wireless network uses a password (and should be).

  Try to temporarily disable security in the router and see if it connects when it is opened.

  When connected log in the router and reactivate security with a new password.
  ------------
  Wireless in general.

  Assuming that wireless router is configured correctly, it is a signal and the wireless card on the computer is physically in.

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  To ensure that if there is Wireless Utility a seller is not running with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd AV/Firewall/security software part, s costume keep blocking aspects of Local traffic even it they are off (disabled).

  If possible set up the firewall correctly, /Security costume otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  
  

• socket InputStream does not get all the data, please help

  I've been doing stuff of network on blackberry for quite awhile, but still using the http connection.

  I have to use the socket for a piece of my application connection, but could not do the work.

  This code is what I do

  String url =

  "socket: / / ' + rmserver + ': ' + rmport;

  Socket SocketConnection = Connector.open (url) (SocketConnection);

  socket.setSocketOption (SocketConnection.KEEPALIVE, 1);

  OutputStream = socket.openOutputStream ();

  InputStream = socket.openInputStream ();

  send something here using outputstream

  int

  If (f > 0) {}

  do somwthing

  }

  AV is always 0.

  I don't know that my server sends data successfully. I run the network packet capture tool etheal on the MDS Server, I can see given reached MDS Server, but they never come to my device app.

  The outputstream works very well, I can send data from my application and my server code gets all of them.

  Where should I check? If it is http, I can turn on the debugging http on MDS log and see all network traffic, but for the socket connection, data packet is not connected (or I missed where it is).

  Is someone can you please tell me where I should go to understand why?

  Please try the suggestion to remove the check mark on InputStream.available.

• Dreamweaver CS6 - error of internal data - Please HELP!

  Hello

  I encounter an error of internal data on Dreamweaver CS6.

  I tried all the things on the forums as clear your cache, if it does not delete the whole folder cs6, I reinstalled and still its happens.

  Very frustrating, need to update clients websites and I can't connect.

  Help, please!

  Regards Stephanie

  What operating system?

  DW is installed on your hard drive?

  When DW starts acting weird, the first thing to try is delete the Cache of corrupt in DW

  http://forums.Adobe.com/thread/494811

  If this does not help, try to restore preferences

  http://helpx.Adobe.com/Dreamweaver/KB/restore-preferences-Dreamweaver-CS4-CS5.html

  If all else fails, use the tools of CS cleaner below scratch CS6 from your hard drive, followed by a re - install software.

  http://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  Nancy O.

• Min/max number of conclusion in a selected range of dates - Please HELP!

  Hi all

  I'm not very advanced at complex formulas however using this forum in recent weeks thanks to everyone here, I was able to create the automated collection of amazing data workbook. I searched for the last missing piece, and according to two explanations I've found here so far, that they are too complex for me to understand yet what I am eager to realize I thought was pretty simple.

  If anyone can help me with the formula to be used in these empty boxes, it will make my week!

  FYI, I use a mac look that is all to date.

  Thank you.

  

  Until there is an update to mac OS Sierra and new formula to exceed the numbers had worked for me. What is more, so I'm looking for the same answer on the new numbers. Take a look at the formula below and maybe it will give you an idea

  SUMIF (table 1: $1: $1, ">" & EOMONTH(A1,0) will GET (DATE ($A2, $ 1.1 M), 0), table 1: $VP)

• 9 bit RS485... missing data please help!

  Hi guys, I'm running a 9 bit RS485 .vi and although I get successfully most of what I need through with no problems (using the trick of mark/space parity), there are a few problems.

  It's to do with the headers, I put in place; both are 5 characters and although I can see all 5 present on our scope, LabVIEW is only showing the last 3 characters and I can't work where the first 2 are or how to make them appear.

  The funny thing is, one of our PC does a similar thing but will dispay just the FIRST 3 characters of the header, not the last 3 as on our other 4 PCs. All of our PC using 2 isolated, NEITHER Port RS485, even if we use a few different versions of LabVIEW 8.2 in 2009.

  Any help or advice would be much appreciated!

  See you soon,.

  Matt

  
  

• Bought the creative cloud Adobe $ 20 / month, but I do not know how to draw in it. [was: Please help me... totally lost I think I want a refund.]

  I bought the creative cloud Adobe $ 20 / month, but I do not know how to draw in it. I don't have any other products Adobe or Photoshop?

  All said 'CC', but I can't find Photoshop Elements or CS6. Mine is broken? I bought it directly on the site of Photoshop, but I'm so lost. I tried following tutorial, but that does not open the drawing program. On deviantart, it says that I need to buy the product for $80 and pay a monthly fee on that as well as keep the CC $20 of Adobe to use drawing software? I wasn't aware of this how can I get a refund.

  Hi Corinne,.

  Creative cloud has no Photo Shop elements.

  You can get the version of CS6 from here: download and install creative Cloud applications .

  Concerning

  Stéphane

• Synchronization between two databases with only 2% of the data; Please help me

  Hi all
  
  I have two oracle databases in 2 different servers PROD and TEST instances. the two databases are in gr 10 2 in linux servers.
  
  My PROD database contains about 300 GB of data and is dedicated for production area.
  My Test database is dedicated to Spanish test for PROD database. (small server in terms of space and RAM comparing to PROD db)
  I would like to synchronize every week TEST db with PROD db with only 2% of the data and all the structures
  Could someone tell me, if you use a datapump export I can import only 2% of the amount of data and the structures ot theere is another way to do it?
  Thank you very much
  
  best regards,
  W

  I'm not really sure what you're talking about. There is no option, expdp and impdp x % of the data, is that? And if Oracle can sovle repositories inetegrity (PK, FK), it cannot be assumed which tables are lookup table (to be entirely exported) and can not assume the logical data integrity.

  Nicolas.

• Hi can some body please help I'm stuck or lost my brain!

  Hi I'm looking for a way to make my SQL [where] shorter clause that is and I would like to first of all with the basic data, which for me is the country code for the United Kingdom.

  Select

  AA.person1,

  BB.scheme2,

  CC.document3,

  DD.xxxxxxxx

  Of

  TABLE. PERSON AA.

  TABLE. SCHEMA BB,

  TABLE. DOCUMENT CC,

  TABLE. PRODUCT PR

  where

  AA. COUNTRYCODE = "UK" and BB. COUNTRYCODE = "UK" and CC. COUNTRYCODE = "UK" and DD. COUNTRYCODE = "UK".

  Is it possible to combine the id of the table and don't have that 1 x countrycode = "Ru" instead of the above?

  All help greatly received and thanks in advance

  where 'UK' = ALL (AA.COUNTRYCODE, BB.COUNTRYCODE, CC.COUNTRYCODE, DD.COUNTRYCODE )
  

  or

  select * from a join b using(countrycode)
  join c using(countrycode)
  join d using(countrycode)
  where countrycode = 'UK';
  

• code # 97311049 how do I do please help

  I have a touch screen hp Pavilion said need password administration then # 97311049 code can any 1 Please help me I tried everything. . I think so

  Hello

  Enter: 28079089

  Kind regards

  DP - K

• I have download the cc in lightroom and it give me some indication to date but I can't open. I do not know why, please help

  I have download the cc in lightroom and it give me some indication to date but I can't open. I do not know why, please help

  Hello w,

  You can follow the article: connect, disconnect you and | Creative desktop application Cloud disconnect and reconnect back to creative cloud and try to launch your Lightroom 2015 application.

  Let us know if it works or not.

  Thank you

  Yann Arora