Delay on the 'Starting Windows' screen

Similar Questions

• My computer starts slowly by post screen 20 second delay at the HP logo screen

  Hello

  My computer starts slowly by post screen 20 second delay at the HP logo screen. I tried to have this computer in past the test post screen or simply to show the hp logo screen. I wonder if the MBR master boot record some how got messed up. I am running XP Home Edition not windows based anti-virus software
  I think the motherboard is a MSI KM4AM - V AMD athlon XP 2500 + or 2600 + processor I think 3200 400 MHZ memory 2 512 MB memory sticks. Hard drive 80 GB
  There is no other setting in the bios for a quick start

  Sorry about that.

• My acer aspire one does not start. the scrolling windows screen, then screen turns off. logon appears and resets, sys

  My acer aspire one does not start. the scrolling windows screen, then screen turns off. but after a long time (45mins) the login screen appears and d sysytem restarts. I have a multi boot with 2 installations of xp, and this happens with both bones. not able to access my sys to bak - up also. all f8 options were considered, but no use.

  I have some bad sectors on d: (have total 3 drive partitions c:, d:, e: with xp on c: and e :))
  the sys wud show a blue screen and reboot when certain file wud b accessible on d:... now the sys cannot start all... pls help...

  Hi Srimotu,

  ·         You get an error message or an error code?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Try starting it in last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2: Try to start in safe mode.

  http://support.Microsoft.com/kb/315222

  If you are able to boot into safe mode, try a clean boot.

  http://support.Microsoft.com/kb/310353

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  Method 3: Disconnect external devices such as printer, scanner, etc. and try to start.

  Also disable automatic restart in the event of system failure

  http://support.Microsoft.com/kb/307973

• Try to load windows on the new drive, stuck at 'starting windows' screen

  So I'm actually down ranking of windows 8 pro to windows 7 pro two 64. I was finally able to get the comp not recongize just load the USB. My problem is that when it does not start, I'm stuck at 'Starting windows' screen I was wondering, perhaps, that I need to format a patition first? It's a new Lenovo warranty hard drive. (Kind of funny how to send CD's for a laptop that doesn't have a cd player only) I looked in the formatting of a usb key, have had some difficulty in finding a reliable way... Thank you

  Hi davefromsb,

  Windows 8 computers have a bios "UEFI" and so will come with "Secure Boot" as well as "UEFI" only start enabled. Disable secure boot if you do not have and choose start to the "legacy" methods The problem is most likely that the image of Windows 7 which has been engraved on the USB key was burned using an instead of a TPG one MBR partition scheme. I hope this helps.

  -Brian Chan

• Laptop stuck on "Starting Windows" screen

  So, this afternoon, I tried to start my laptop HPG42-373, and it got stuck on "Starting Windows" screen. I ran tests of memory at startup and primary HD, in which startup failed, and primary HD came out with this: "hard disk 1 (303) Quick '. What can I do to solve this problem, if anything, or just to save what I can from my old files?

  Hello

  303 error code is a disk failure short self-test and would indicate that hard is defective and must be replaced.  This is also consistent with the question of commissioning.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  ************************************

  Concerning access to the data on this HARD drive, here are some options you can try.

  1. one possible way to try to recover your files from a disk non-boot is to follow the process described in the link below.  The CD of the Ubuntu operating system you create can launched from the CD alone (IE it doesn't have to be installed on the hard drive) and I've often found to successfully extract data even a hard failure.  When you created the CD, follow the instructions and see if you can save your existing files. 

  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windo...

  2 another option would be to remove the drive HARD, place it in an external enclosure - is an example of the link below - connect to another PC and see if you can access your files.

  External 2.5 HARD drive caddy ".

  Kind regards

  DP - K

• Stuck on "starting windows" screen during installation of Windows 7

  Hello

  I used windows 10 in dell inspiron13 7000 series. Now, I want to use windows 7 as for my personal use. When I try to boot my laptop with USB stick bootable, because I don't have cd player in my laptop. The problem is when I run the startup it stuck at 'starting windows' screen I can't go any further, so I need force shutdown my laptop. I am unable to install windows 7 on my laptop. What can I do, please help me.

  Thank you.

  Hi Praveen,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  1. is Windows 10 still installed on your computer or you have wiped the hard drive?
  2. don't you upgrading from Windows 7 to Windows 10?

  Thank you for details on the issue.

  If Windows 10 is installed, you can downgrade to Windows 7 within 30 days of the upgrade. If it crosses the 30 day limit, the option in the settings that allows you to return to your previous version of Windows will not be available.

  Please see this link:
  Return to Windows 7 or Windows 8.1
  http://Windows.Microsoft.com/en-us/Windows-10/going-back-to-Windows-7-or-Windows-81

  However, if you want to install Windows 7 from an external installation media, you can re-create the rack installation of Windows 7 from this link:
  https://www.Microsoft.com/en-us/software-download/Windows7

  It is possible that the installation media does not develop properly. Please also make sure that you disconnect all the devices connected to the computer before installing Windows 7.

  Note: You may lose programs installed after upgrading Windows 10. I strongly recommend to back up your personal files and data on an external hard drive.

  I hope this information helps.

  Simply answer the required information and let us know if you need more help.

  Thank you

• Pavilion dv6 stuck on starting windows screen

  Pavilion dv6 stuck on starting windows screen.

  Memory test: past

  Smart check: past

  DST short: FAILURE

  FAILURE ID: 60FTV0-5KS6SG-MFH14J-60UH03

  PRODUCT ID: LF1374AV

  Hard drive 1

  Help, please. I bought a new internal hard drive. But I have no recovery disks.

  Thank you

  XPJ

  Hello

  There are two options available.

  1. you can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

  Order HP recovery disks.

  2 another option, if you came to laptop with Windows 7, you might consider is to create your own installation disc.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( must be the same version - i.e. Home Premium.) Professional etc. - initially supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  The source of the Image is Digital River.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You may need, additional drivers and software are from here.

  Best regards

  DP - K

• How to return to the starting window?

  I installed PSE12...

  Initially A window (I call it the start window) appears allowing you to choose to use Organizer or PhotoEditor... for some reason that I see an option to open the organizer at startup...

  Now I don't know how to return to the Photo Editor...

  Or how can I get back the start window...

  Any help please? Thank you.

  Use the top menu:

  Help > welcome screen

• Access to files and folders from 'My Computer' in the start window

  My computer is Windows XP SP3. I can't access my files and folders when I go to the start window and the work center. I don't know where start solve my problem. Can someone give me an idea of where to start to solve my problem? When I go to the start window and select my computer, it indicates that the request is "not responding".

  My computer is Windows XP SP3. I can't access my files and folders when I go to the start window and the work center. I don't know where start solve my problem. Can someone give me an idea of where to start to solve my problem? When I go to the start window and select my computer, it indicates that the request is "not responding".

  There are a number of issues that can cause the behavior of this type. The most common is malware. Please proceed with the instructions below. Please do not perform any other task than those prohibited here. It confuses only my attempts to help you.

  Click HERE. Download Malwarebytes. Update Malwarebytes and perform a full scan.  Choose to quarantine found nothing. Once completed click HERE and download Superantispyware Portable. Run a full scan quarantined found anything yet. Restart your computer in normal mode and perform a quick scan with Malwarebytes.

• After repaired Windows XP Prof on my HP computer with OEM license while trying to connect to his request activate windows with option or NOT, although I have to say yes or no its loging off drving not me to the main Windows screen

  After repaired Windows XP Prof on my HP computer with OEM license while trying to connect to his request activate windows with option or NOT, although I have to say yes or no its loging off drving not me to the main Windows screen... How do I activate windows or how can I connect windows. Once I login I can activate as I have OEM license... Pls advice

  Activation of Microsoft Hotline - (888) 571-2048 MS - MVP - Elephant Boy computers - don't panic!

• Trying to access my creative cloud account to download a trial version of InDesign... I have a blank in the CC window screen when opened...? Water from the tap that says I'm download Indesign has been stationary for hours? The CC window is empty... I may

  Trying to access my creative cloud account to download a trial version of InDesign... I have a blank in the CC window screen when opened...? Water from the tap that says I'm download Indesign has been stationary for hours? The CC window is empty... I don't think it's the download. Why would it be?

  White screen

  https://forums.Adobe.com/thread/1249756

• Stuck at the start-up screen

  Hi, I use Jdeveloper 12.1.3 and the extension of the ADF Mobile on Mac OS X Mavericks. iOS 7.1 and Xcode 5.1.1

  If I make an application with a HTML file and deploy Simulator iOS, the app works great.

  If I apply with an AMX-page the and deploy on iOS Simulator, the app is stuck at the start-up screen. "Loading...". »

  Any ideas? I tested the "Navigation" public sample and deploy and works very well.

  Concerning

  Thomas H

  I looked in the debugging using the iOS Simulator. The problem causing my problem was not supported for encoding. I used ISO-8859-15. Changed to UTF - 8.

  Thank you for you detrilles Sudipto link on debugging =)

  -Thomas H

• Windows is stuck at the "Closing Windows" screen

  Hello:

  I'm having a problem with the Fusion 4.1.3 on an iMac 2010 10.7.3 running. Windows XP is stuck at the "Closing Windows" screen. What can I do to complete the procedure to stop and then restart Windows?

  Thank you

  Post edited by: JP7469

  Try to do a forced shutdown... Virtual Machine menu > Option key > Force Shut Down

  Take a look on: switch Power controls from the default Options

• Windows xp sp3 delay at the start after login

  I have a windows xp sp3 with 2 GB of RAM and 250 GB HDD to 45-50minutes to load after I entered my user name and password.

  Please, how can I solve this problem. I checked the hard drive for errors, and the system will load faster on e-safe. Mode
  Concerning
  DOE

  To connect to your computer, there are a lot of programs, processes and services launch.  It is likely that one or more of these processes contributes to your delay.  The first criterion would be starting for a minimum system.  This is what we call 'Safe Mode'.  When you start your computer, several times, press the F8 key until a black and white screen comes up, and then select "safe mode" or "safe mode with networking" with the arrow keys and starts.  If your computer starts up fairly quickly, then we the non-critical elements that contribute.

  To debug this, you use a program that will show you all the programs that start at startup and allow you to temporarily cut some of them to determine what (s) is / are the cause of the problem.   Microsoft has a built-in program called "msconfig" or you can download another program called "autoruns" from Microsoft
  Autoruns: <> http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx >

  Instructions for the startup and use of msconfig are contained in this article:
  "How to solve configuration errors by using the System Configuration utility in Windows XP"
     <>http://support.Microsoft.com/kb/310560 >

  When you find what's causing your problem, the action is usually obvious.  Sometimes UN-installing and reinstalling is all you need to do.

  -JW

• HP M9000: Black screen after the "Starting Windows" logo and the windows on the screen

  I just gave me a m9040n HP Pavilion Elite with a Q6600 CPU, graphics card ge force and two 500 GB HARD drives in.

  When I starts it up it seems to be ok the HP blue screen will lights up at the start of the BONE and displays "starting Windows" on the screen with the windows logo. and then it goes to black with just the cursor on the screen. (Vista) So I know WHAT BIOS is ok, the graphics are windows allowed from.

  I went to the HP system F11 recovery and he seems to think that all is well... Very confused ideas?

  Thank you, Glenn...

  400workstation

  It looks like one or more of the boot loader files has been corrupted.

  You need access to a PC for this phase of work in order to create the necessary support to fix your PC boot loader.
  
  You will need to create something called a CD-ROM of repair of Win7. This will repair the boot loader files, and if that is the problem, your PC will start OK after that.  Yes, it's for Win7, but Vista uses the same bootstrapper, so you can use Win7 to repair the Vista bootloader files.
  
  The file you need can be obtained (with supplement) from this link: http://neosmart.net/blog/2009/windows-7-system-repair-discs/
  
  When you download this file, it will be an ISO file.
  
  To make a CD bootable it, you will need to download and install ImgBurn: http://www.imgburn.com/
  
  Once you have installed, run, select the option "Save image to disk file" and select the downloaded ISO file and that it points to a blank CD.
  
  To make a USB bootable of it, you will need to download and install RUFUS: https://rufus.akeo.ie/
  
  Once you have that, it is executed in the input of the unit, use the drop down menu to select the USB stick.  Near the bottom right, where is written 'Create a bootdisk to aid', select the ISO file downloaded.
  -------------------------------------
  
  Boot from the media that you have created and follow the instructions in this link: http://www.sevenforums.com/tutorials/681-startup-repair.html
  
  You will probably need to run Startup Repair three times for him to fix all the boot loader.
  
  Once completed, your PC should start OK.

  If it isn't, then some files of the operating system has also been corrupted and the only way to fix it would be to perform a system recovery - which if F11 does not work, but a recovery from the PC to its original using recovery media state.

  Problem there is that HP no longer wears a recovery media for the Vista PC, so you should check to see if these sites still have it: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================