Delegation of network file

Similar Questions

• iCloud library is not available if the system library is located on a network file server

  I moved my library on an external hard drive, that drive is directly connected to my router via the USB port.

  I can make pictures to my library of photos and pictures of charge very well. I've set the library to serve the library system:

  

  But, by selecting the option of using iCloud library gives me this error message "iCloud library is not available if the system library is located on a network file server.":

  

  I have the ability to connect this external hard drive to an iMac which is used as a server, I just prefer not, but if it's the only option I want.

  So in short, can I use this configuration? If so, why the error message and how to cope.

  Thanks in advance to all.

  That's right - the library needs (for iCLoud, use of the library and for the safe operation) to be on a local wired connection - may not be on a network connection

  LN

• Warning message to turn off "Are you sure that you want to copy this file/folder without its properties" message during the transfer of files and folders on network file servers? »

  Original title: Annoying message of loss of property

  Win7pro x 64 here.

  Is there a way to disable this annoying message "Are you sure you want to copy this file/folder without its properties" during the transfer of files and folders in all of network file servers?

  Pokermon salvation,

  It would be better if post you this question in the forum category below where this problem is related to Windows server 2003.

  Windows Server forums

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  If all goes well, they will be able to solve this problem.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• network file host etc.

  I would like to know how to configure a host on a network file

  Sharing the C:\Windows\System32\drivers\etc\host file is for me a permission problem. I edited the permissions does not.

  create a shortcut of the file sharing host and it bypasses security but when editing it on a network is a no NO major the only thing you are editing is your own host file without even knowing.

  The scenario why I want to manually edit on a network

  I edited a number of host files that facebook is no longer available on the network, but must be available for a single person (on request)

  by sharing the host file from a pc on the network gives me access to add or remove 127.0.0.1 www.facebook.com for the host file.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Windows 7; Windows firewall prevents the discovery network, files and printers, sharing, public folder sharing and streaming media

  Windows Home Premium SP1, completely up to date.  Windows Firewall is enabled.

  Try to keep the file sharing and printers on a home network.  Try changing the settings on the control panel; All Control Panel items: Center network and sharing; Advanced sharing settings.

  When I try to change the option buttons for sharing, then click on save changes at the bottom of the page, the screen jumps to the network and sharing Center.  Object entering the settings advanced, no parameters have been recorded.   The comoputer restarting does not help.  I checked that the following services are running and set to automatic according to the http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/cant-turn-on-network-discovery-and-media-streaming/98654e71-4bff-4dd3-acec-ffc3524d44a4;

  The base filtering engine
  DNS client
  Function Discovery Provider Host
  Function Discovery Resource Publication
  HomeGroup listener
  HomeGroup provider
  Server
  SSDP Discovery
  UPnP device host
  Windows Firewall

  When I stop the Windows Firewall service, I can activate the sharing I want.  Of course the windows firewall prevents sharing I would do on my network.

  I'm uncomfortable with Miss having a firewall work on my computer.  How to configure my Win 7 machine windows firewall to allow communications with my homegroup?  I tried to restore the default values.  This did not allow the communication.  I tried to find the homegroup settings in the advanced settings of the windows firewall.  No luck there.

  What should I do to configure my windows firewall to allow network discovery and file sharing of printers and media streaming and sharing?

  Hi stephanie,.

  Thanks for joining us out on Microsoft Community Forums.

  Looks like the Windows firewall prevents the discovery network, files and printers, sharing, public sharing of files and streaming media. We will analyze and identify the cause of the problem.

  You have a third-party antivirus installed on the computer program?

  Method 1:

  To turn on network discovery
  
  1. Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center, and then, in the left pane, click on change settings for sharing advanced.
  2. click on the chevron to expand the current network profile.
  3. click turn on network discovery and then click on save changes. If you are prompted for an administrator password or a confirmation, type the password or provide
  confirmation.

  The article below explains all about the network discovery:
  http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-network-discovery

  If any of these responses not solve the issue, let us then run the sfc scan and check if any file system is corrupt. I also recommend to perform a clean boot in order to find the root cause of the problem.

  Method 2:

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  b. type the following command and press ENTER:
  sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  More information on SFC scan found in this document:
  http://support.Microsoft.com/kb/929833

  See also:

  Open a port in Windows Firewall

  http://Windows.Microsoft.com/en-in/Windows7/open-a-port-in-Windows-Firewall

  Allow a program to communicate through Windows Firewall

  http://Windows.Microsoft.com/en-in/Windows7/allow-a-program-to-communicate-through-Windows-Firewall

  Hope this information helps. Get back to us if you have more queries about Windows.

• Synchronization of blackBerry Smartphones Medis "network file not found."

  Impossible to find a solution for the following.

  Media files are stored on a NAS drive and mapped Drive 'R' on the PC

  Organizing media is iTunes (Win), perfectly handle all files, playlists etc.

  The sync to BlackBerry Desktop M (6.x) media together as "itunes."

  First time, it worked perfectly, files moved to Blackberry as a whole. Later, once, Director of office deleted all files and since on the media manager tab is a status message after each music file "network file not found."

  Win7 64

  Any suggestion?

  Thank you

  seems the version number. moved to build021 (6.0.1.x) and it works perfectly again

• Domestic network file share is slow

  Hello

  I'm having a problem with a slow flow on my LAN, my main office and another office in a nearby room, which is used as a digital recorder. Both are fine Internet download about 2.0Mbps + effective flow. But the copy of the files between them (which should be a lot faster!), I'm moving 400 to 500 Kbps. Since one is used as a digital video recorder, it is a problem, try to copy large video files, or stream videos in HD quality on my network who stutters. It's frustrating getting the best quality watch Netflix, than from another computer in my own home.

  Both have compatible 802.11n wireless NIC; one is a card PCI Rosewill RNX-N300, and the other is a TP-LINK WN951N PCI - E card. I use the Atheros drivers on the machine of TP-LINK; on the other hand, it seems that Atheros does not support the Rosewill cards very well, so it is the driver of stock. Even on the TP-LINK machine; using the factory instead of Atheros driver, doesn't seem to help. My router is configured for WPA2 802.11n 'Mode of Performance '. I also tried Compatibility Mode and everything else I can think.

  I realize that the Atheros drivers are not supported here, but I don't think it's relevant, as the factory, or native Windows 7 generic NIC drivers appear to have the same problems. I tried to minimize interference with cards, which usually get 3-4 of 5 bars. WAN speed being much faster, I doubt that's the issue. Wired ethernet is out of the question for me, but pretty much the same speed powerline adapters, seems no better/worse. LAN ping times are 1-2 ms.

  Is there something I'm missing here? Both machines are running Windows 7 Pro x 64. I wonder if there is a key "reg" to the packet size or anything else that might help. I would chalk up to the nature of wireless cards, if it wasn't for much better WAN speeds. I believe that it is a problem of operating system settings; all other devices on the network, continue to get faster internet blazing ascent/descent speeds, even though the slow file copies/streaming are underway.

  Thanks for your suggestions.

  Hello

  This might help:

  http://www.SevenForums.com/network-sharing/218886-very-slow-network-file-sharing.html

  http://www.SevenForums.com/network-sharing/25843-slow-file-transfer-over-network.html

• VMware Fusion keeps resetting my network file

  I'm trying to set up a Windows Server VM and allow access to external computers through RDP/DRC. To enable port forwarding, I added the following text to the end of my "/ Library/Preferences/VMWare Fusion/network" file (addresses changed because I'm paranoid that way):

  [incomingtcp]

  # Port forwarding for incoming RDP requests

  3389 = 172.16.252.10:3389

  [incomingudp]

  # Port forwarding for incoming RDP requests

  3389 = 172.16.252.10:3389

  The problem is that every time I restart VMWare Fusion, my network file returns to its previous state, and my updated the file is stored in networking.bak.0.

  Am I missing something here?

  If it helps: I'm under VMWaare Fusion 7.1.2. Network of my VM is set to NAT (alias "share with my MAC"). My virtual computer is configured with a static IP, the same, I added in the network file. I tested DRC between host and the VM and it works fine, I just need to enable access by other computers on the same network.

  Thanks in advance to anyone reading and/or responding to this.

  I know it's lame to answer my own question, but I just realized what was wrong. Apparently, I got some wrong information about the Internet, and I should have added the text in the file nat.conf instead of the network file.

• RMAN to the ASM and network file system

  Hi all
  
  I use Oracle RAC 11 g R2 + ASM.
  I am new to RMAN, but I am trying to build daily tasks to do below:
  
  1. backup of my database to the FRA located on ASM diskgroup + FRA.
  2. at the same time I want to save my database for Network File System (NFS) to be taken by system administrators to an archive location that I can't access. Since according to my knowledge can't copy files to ASM for outside... so for this I'm planing to use the command format of the NFS mount point.
  3. on daily basis in the NFS file will be taken by a work (that I am not responsible for) to the Archive, and then it will be purged from this location.
  4. I am planing to have my windows of 15 days retention strategy.
  5. on every day, I am planing to cross check my backup and then delete the expired so that taken from NFS in the journal of the archives is deleted.
  
  The RMAN I am planing to run it on a daily basis are:
  

  backup incremental level 0 cumulative device type disk tag 'FULL_DB_INCR_LV0' database; -- this will be to the default location (+FRA)
  backup incremental level 0 cumulative device type disk tag 'FULL_DB_INCR_LV0' database format 'NFS/oracle/backup%U';--another copy to be taken to the archive location
  crosscheck backupset;
  delete expired backupset; -- this will delete the backups taken to the Archive location

  Now my questions:
  
  1 what good solutions? take account of the fact that I need backup on the file system of the operating system so that the jobs of system administrators take the backup of their archives.
  2. If a backup is needed, I use CATALOGUE START WITH to recover and then recover.
  3. because my retention period is 15 days, and the backup in NFS files will be deleted on a daily basis, so this retention will apply for backups in ASM, is this a problem?

  Hello

  Easy way is to use the tag. Find the number of backupset is a difficult task.

  Create a template for your tag with a date.

  How to use the Substitution Variables of orders RMAN [427229.1 ID]

  How to use the tag name of RMAN with different attributes or variables. [580283.1 ID]

  You can check which backup doesn't have a copy on NFS using the query below:

  SELECT   BS.RECID BSKEY,
    BP.RECID KEY,
    BP.RECID RECID,
    BS.PIECES PIECECOUNT,
    BP.HANDLE FILENAME,
    BP.TAG TAG,
    BP.COPY# COPYNUMBER,
    BP.STATUS STATUS,
    BP.PIECE# PIECENUMBER
  FROM V$BACKUP_PIECE BP,
    V$BACKUP_SET BS
  WHERE (BP.SET_COUNT = BS.SET_COUNT
  AND BP.SET_STAMP    = BS.SET_STAMP)
  order by  bskey,copynumber
  

• The network file scanned Documents (PDF or JPG) = 0 (OfficeJet Pro 8500 has 910 bytes

  I have OfficeJet Pro 8500 910 has connected to the wired network with domain

  I created a shared network folder with read access to my computer (operating system windows 8 Pro X 64) through IP address of printer

  http://10.181.XX.xxx

  The shared folder has appeared on the screen officeJet and test with success, when I wear analysis on the officejet, the digitized file appeared on the network folder but with of size 0 bytes and does not open even it is pdf or jpg

  I have same door on the other computer is windows 7 PRo X 64 spouse for the same field and scanned documents open succefuly.

  Help, please

  My problem was solved by updating the HP 8500 has the latest firmware

  Thanks for trying to help me

• Simple network file sharing XP Home Edition

  I have windows XP Home Edition 2007 Service pak 3. I can't share files on the network. In the network > tools > there is no file simple file sharing check box

  "Simple file sharing" is applied (always enabled) for Windows XP Home editions.  Only XP Pro editions can disable Simple file sharing.  This does not mean that you can not share files.  Generally, you share folders simply by doing a right click on a folder and selecting:
  Properties-> sharing (tab)-> share this folder.

  You must also have the file sharing and printer installed and active on your computer.  More about here:
  "You can not access the shared files and folders or browse computers in the workgroup with Windows XP"
    <>http://support.Microsoft.com/kb/318030 >

  HTH,
  JW

• I have problems with network file sharing on 3 Windows XP computers.

  I created a network of small business between 3 workstations.  The last 2 set up on the network can communicate and share files between them, but cannot connect to the 1st workstation set up on the network to share files.  connect to 2nd & 3rd ws 1 ws.  a ping to the 1st ws is OK.  followed all the instructions for sharing and folder permissions.  is there any security on ws 1 problem that I forgot?

  original title: shared folders

  Hello

  Follow the steps in troubleshooting these items:

  How to troubleshoot a network home in Windows XP

  How to use Simple file sharing to share files in Windows XP

  See also:

  How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP

• I can't get the XP computer recognize the Windows 7 network file share more wireless

  Problem file/network sharing wireless with a professional system XP and Windows 7

  I have 2 computers - 1 with XP and Windows 7 pro upgrade and use a secure wireless network...  I have set up my network on the new computer and can see the files on my new XP computer, but I can't get the XP computer to recognize Windows 7 one.  What should I do?

  Hi Captive,

  
  Method 1:

  I suggest you to check if temporarily uninstall the antivirus software on the computer Windows XP allows you to connect properly.

  But don't forget to install the software after troubleshooting is done such that your computer will be at risk.

  Method 2:
  You can also check the settings of firewall on the windows XP computer. You can check if the ports are opened correctly for the network to connect. See the help link - below
  http://support.Microsoft.com/kb/283673

  Method 3:
  If the problem persists, you can even perform the clean boot on the Windows XP computer and check if you can identify the application that is causing problems in the clean boot state. To perform the clean boot follow step 1, mentioned in the article, below, and then try again checking in this state of boot -

  http://support.Microsoft.com/kb/310353

  If the issue is resolved check what non-Microsoft service or program is at the origin of the problem. referring to article and following the other steps.
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click on restart.

  I hope this helps.

• Mapped DFS network file causes windows Explorer to hang

  Hello

  I have an environment running windows xp service Pack 3 and distributed file system (DFS) mapped network.
  The domain level is windows 2003 service pack 2 and server dfs are running in windows 2008 service pack 2.

  whenever a client machine connects open Windows Explorer / my computer on a slow network or vpn, Windows Explorer / my computer freezes for ever. The computer can operate correctly, except for this problem. The only way is to cut my cable network or perform a restart.
  I suspect it's due to the unavailable to the dfs file server SMB 445 port.

  I have found no solution or the hotfix of google or microsoft knowledge base.
  I also tried to find ways to change any dfs registry to reduce the interval or prevent as much as possible.
  For the moment, I am naïve, thank you for any help or experience to solve this problem.

  Hi Patrick.star,

  The issue of Windows XP, you have posted is related to Windows XP in a domain environment. It is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• Sharing problem between laptop XP Pro and XP Home PC network file

  I have a PC with XP Home SP3 which I want to be able to access from my work XP Pro laptop. I used to be able to do this, however, in recent years, I had to replace my disk file or reload due to errors or mechanical failure. Whenever I had to do this, it seems that my ability to access shared folders on the PC has decreased. I used to be able to access all files on the PC, even the C drive. More recently, I could no longer access the shared C drive, but could still access a folder. However, after the disk file was last modified, I can now only have access to the shared printer.

  More details - I can see all shared folders on the PC, but I can't open an any of them. I can ping the two systems together, by IP and hostname. My guest account is enabled. I tried to start the PC in safe mode and changing the permissions of the group. I tried disabling my firewall windows on the PC. None of these changes the errors I get. I am an administrator on both systems. NetBIOS over TCP/IP is enabled on both systems. I had a 3rd party firewall (McAfee), installed as a trial, but the trial has failed and I uninstalled it. I have an XP Pro PC to work that I can access via this same laptop from work.

  Errors are 1130 system error - not enough server storage is available to process this command, or '\\computername\resource is not accessible. You might not have permission to use the network resource.

  Any ideas? I'm pulling my hair out here...

  I wouldn't say that we set the other problem. If I net use x: \\computername\resource, I still get the "not enough server storage message" and it doesn't seem to matter what I increase the IRPStackSize value to.  I ran the command net user as well, also without any change.

  Any other ideas?