Delete all the files/folders of old install once the last series on the window updates have been installed?
I have everything, if records of installation/uninstallation and newspapers since I installed XP.
I'm sure that the last set of Windows updates work.
Is there a problem with the removal of old files/flies and connects using CCleaner?
If not all, can I at least remove those older files that the SP2 install date?
What problems can I hire after cleaned?
I guess that the answer to MS Office updates also apply.
If your PC behaves properly, you can remove the hidden Windows hotfix backup files that start with $NTUninstallKB to the WINDOWS folder. There are two ways to do:
A. manually, but copy files on a CD/DVD first to enable their restoration has a fix must be removed thereafter. Now delete the folder \WINDOWS, but leaves the orphan entries to add / remove programs intact. Remove only the $NTUninstallKB files that relate to corrections, not those for applications such as Word, WMP, etc.. In addition, DO NOT DELETE THE folder$ $hf_mig.
B. my preference goes to run a script that also removes the corresponding entries in Add / Remove programs. Once they are deleted by the script, they cannot be restored. Download, extract and run this little scripthttp://www.dougknox.com/xp/utils/xp_hotfix_backup.htm creating a system restore point first just in case something goes wrong when the update of the register.
dkafox1 lost all THE WINDOWS updates that THEY ARE NOT INSTALLED UPDATES, more problems with windows update. May HAVE a PROBLEM WITH REGISTRATION BUT DO KNOW NOT if this msi I HAVE HELPED.
I have windows 7 x 64 Version 6.1.7600.16385. My windows update has only downloaded and installed a fix (KB947821 on 22/03/14. In the event err log # 2147942487command line: "C\:WINDOWS\SYSTEM32\WUSA '". "»» "EXE" "Windows Update Troubleshooter said" search for missing or corrupted files. I did a sfc/scannow and everything was fine, that the settings are incorrect... Went to computer management by looking at the windows log. Event ID was found in respect of the implementation of 3. Looks like I've lost all my updates. Window update is only showing KB947821 HOT of difficulty. All my other downloading updates for the past two weeks included Microsoft Office Update that I can't see anything there all gone. I check the installed updates and 14 updates that don't settle all gone. Windows Update indicates any problem or error #. It says Windows update installed "Never". I tried the solution to the difficulty of corruption problems MSI software update registration. Help I don't know where to go from here. I ran the windows Memory Diagnostic tool, which came with no error. In the community he sent me to back registry which I do not know how to do. Can I save on my hard drive or another source. He says type reedit32.exe. I have the windows 7 registry editor wants me to save the registry key or subkey > I do not know what files to back up or export. I'm not computer savvy, but I do what I can do better. Had problems with windows update not install and now not download or install 2 MOS. So where and how can I know what updates I need after that this problem is corrected. Thank you
If you want Office 2007 updates to appear in the installed updates again, you would need to uninstall/reinstall Office 2007 and install all the updates again.
Assuming that Office 2007 is installed & working properly and no update is offered when you run a manual check for updates now, you might want to leave enough alone (that is, do nothing) - then see if the 2 updates for Office 2007 SP3 be released next Tuesday (a) receive, (b) successfully install and (c) are listed in the installed updates later.
PS: The possible causes of the problem are messing with registry cleaners, messing around with the Software Distribution folder, and the fact that it was a computer refurbished when you bought it.
Five of the six updates have been installed correctly, KB2698365 failed with error code 80070570. What should I do to install this important update successfully. I'm not a pc expert and don't have no knowledge will take it the word of experts from the pc. KB2698365 is 'important', so I tried to install it several times, but always failing with error code 80070570. I've been on a boring treasure hunt for to install this 'important' update, it seems to find no will to give helpful advice anywhere. I would appreciate help installation of this major update, and talk about normal advice, how to install it successfully without failure of the error code 80070570. What is the error code 80070570.? I use windows vista Home premium, service pack 2, 32-bit operating system. I'm using the essentials of security. Thank you for the consideration of this issue. NIC
Follow the instructions given by Taurian & guenoun
I have a Windows Vista Home Premium on my PC. I kept getting the icon on the lower right of the screen "new updates are available to the general public" everytime "Windows updates have been installed properly" installed". Please advise how can I get rid of this? Thank you in anticipation of your help.
1. have you made changes on the computer recently?
2. what day is offered at each reboot?
I suggest you try the steps from the following link and see if that helps.
Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
How can I restore my empowering technology from acer asire Home premium back to factory with a recovery disk? All the factory settings have been destroyed, and windows vista ultimate sp1 has been installed on my computer.
I have an acer aspire 4720z / with windows vista home premium / with the enabling technology / processor intel pentium dual core. I think I downloaded a program limewire lennex, it was suppose to be something else. Somehow that he closed my computor, luckly my cuzin was able to download windows vista ultimate SP1 64 2007 multimedia content on my laptop so that I can at least use MY COMP. But I think I like the version that is installed on my comp.better to the ultimate version on my comp.now, it does not seem as before prefome. Some things on my computer laptop don't prop wk. What should I do, go back to my version Home premium of moose? If so how to do that? I don't have a home premium recovery disc. I tried to install the updates of windows SP2 64 thought repairs that would set back 2 the origonal but settings it na not or at least update the ultimate version do you think I should do.
If you have downloaded Vista Ultimate and not bought, you use pirate software.
You will receive NO Support for pirated software.
If this does not work, contact Acer:
Acer eRecovery made
1. on the Acer splash screen, you can press Alt and F10 (at the same time press F2 to enter the BIOS) to make it appear a version BACK style eRecovery.
· The unit is able to reload Windows from this mode faster then CD.
· The default password is 000000 (6 zeros) and it is shown when you are prompted for the password.
· Users are able to change the password in this mode for eRecovery only.
· The system can retrieve the hidden on the hard disk (partition PQService) image or a CD/DVD media.
· It is possible to reload the factory CD/DVD style or snapshots that creates the eRecovery Windows version.
2. in Windows, there are 3 ways to access eRecovery functionality.
· Press Alt and F10
· Open Acer eManager and then double-click eRecovery.
· When a system is new it should automatically open this application and invite you to do the recovery media.
3. the Windows version of the eRecovery program is stronger then the Dos Version. Below you will find the various features of the Windows version:
Recovery settings: create backup files and change password
· Picture of the backup snapshot (create a disk image of your system configuration)
1. the system is able to make a CD/DVD image of the current state of mobile software including customer programs installed.
2. This CD/DVD is usable in Windows and DOS of the program version.
3. the drive should start, but isn't always.
4 when a snapshot is in fact the image is on the D: partition and then can be burned to disc if eRecovery is said to.
· Burn the Image to disc (create a backup disk)
1. you can create 3-7 CD or DVD 1-2 such as those that were sent with the units before eRecovery.
2. the serious CD are equal in usage to the system recovery CD and CD
· Remove data from backup image of capture instant user (if available)
1. This is how delete you the snapshot on the D: partition images
· Password: (change the eRecovery password)
1. measures: restore your system using an existing backup file or restore the default configuration in your system factory.
2 backup copy using one of the snapshots has been filed or the original image on the D: partition.
4. made eRecovery
· When the hard drive is replaced the system loses its characteristics eRecovery. These features are on the hard drive and cannot be reinstalled.
· When reinstalling from the CD/DVD's you will lose the eRecovery program but the DOS version can still function, as if uninstalled, you can not reinstall.
· eRecovery uses Ghost (as well as the use of our recovery CD) to create snapshot images.
· If the PQService partition is removed using fdisk or a utility under Windows, you may need to reinstall Windows.
· If the system is recharged using the DOS version you retain the eRecovery feature
Mick Murphy - Microsoft partner
Often, I have to reinstall from my copy of Windows Vista 32-bit. Whenever I do this I have to go through the process of updating all online again, since before the SP1. Of course, this implies several reboots as he patched the update and takes usually 3 or 4 hours. Is there a way I can pack all of the updates to date in a single file which I can run immediately after a new installation?
It is available online, or is there a packing method updates on my computer?
Also I'd rather not do this by creating a "ghost image".
As for the original question, turns on you can download SP1 and SP2 from the Web site. If I did that, then stored the files on my other HARD drive, I could run them immediately after a new installation. It would take a lot of time in the update process.
Unfortunately, there are several SP1 and SP2 updated prerequisite that must be installed before either Service Packs can be installed, so I must say no, it would not be a viable solution.
Very generally, it is not advisable to install a Service Pack for Vista until and unless it comes to the computer through Windows Update.
Your best bet would be to avoid all situations and/or applications that could lead to having to do a clean install of Windows.
Speaking of which, you format the HARD drive and do a clean install every time, right? ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
Windows updates have been loaded last night no idea those who. Now my computer does not restart. I can't restart in safe mode. I can't reboot with the original disc from the manufacturer. I have Vista OS with a Dell laptop inspiron 1720.
I have the page that says that Windows does not load the last time and you have the choice between about 4 ways to load. Not the work.
I tried the dell disk and who does not. All this just goes back to safe mode page.
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
Consumer Security Support homepage
For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx
For enterprise customers, support for security updates is available through your usual support contacts.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
Whenever I create a simple trigger, this simply doesn't work. I did the tutorial animated stars on Lynda about 4 times now. I followed the tutorial to a T, initially, everything works fine. I've even saved a copy in a separate file and called it "Stars_Animations_Working", I reopen it later, preview in browser, and all of a sudden it stops just work. Any action that seems put in busy border is almost always ignored, it's a mystery how he seems to play the file animated tutorial star very well the first time that he spotted in the browser.
I'm trying to create symbols with stocks 'mouseover' or 'click', IGNORED.
I try a loop an animation I made with 'sym.play(1000)', IGNORED.
I'm trying to stop my step any animation, it's true, IGNORED.
There is no error at the bottom of the screen or when I save the file. I realized my project in Chrome.
It's extremely frustrating and I can't make any more progress on my assignment until I find it. If anyone has AN idea of what the hell is wrong then I am open to try. Thank you guys.
There is an error on the trigger 250 s
You need a comma between "absolute" and "top".
What do you want exactly what to do?
I am irritated beyond belief. Why should you change a good thing and make stupid?
In the part of privacy options, I used to be able to see ALL the cookies that have been installed in a window, and I could choose those to whom I want to delete. I guess it was just too much control to give to us, if you had to remove this feature, right?
I would go back to a previous version of Firefox. I'm sick and tired of your stupid updates that screw things for everyone.
How can I revert to a previous version?
- IF you use the parameter "Remember history" (as described in this article-> story to remember), click Delete the Cookies to view all cookies
- IF you use the parameter "use custom settings for history" (as described in this article-> use the custom settings for history), click View the Cookies to view all cookies
Check and tell if its working.
For some reason any I'm not anymore to check the windows updates. I ran the troubleshooting and tried to "update now" and I always get the message "there was a problem of updates." Can someone help me with this?
Unclicking just the update of Microsoft in Windows Updates settings worked for me. It seems that Microsoft like Word and Excel products automatically updated. You can go in Word or Excel, click on file, the account and update options. I don't think it's a coincidence, but I stopped to receive Windows 8.1 updates since I received the notification of updated 10.0. (I'm waiting for all the bugs that have been fixed before moving on to 10.0). 80244019 8024401F. Error.
I completely deleted Firefox and deleted all the files. After installing fresh Firefox, Firefox sees that it has been installed previously? "Looks like you have reinstalled Firefox. Want us to clean for a fresh experience and as new? »
I uninstalled Firefox (so-called) "completely" using the guide here: https://support.mozilla.org/en-US/kb/uninstall-firefox-from-your-computer
Why the new installation of Firefox recognizes that it has already been installed? Uninstall tool to uninstall Firefox COMPLETELY. As it is, can someone tell me what is the appropriate procedure for removal COMPLETE?
All right, thank you in any case obtained.
I removed all of these places:
C:\Program Files (x 86) \Mozilla Firefox C:\Users\Chris\AppData\Roaming\Mozilla\Firefox C:\Users\Chris\AppData\Local\Mozilla\Firefox
C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Mozilla Firefox.lnk
HKEY_LOCAL_MACHINE\Software\Wow6432Node\Mozilla\Firefox HKEY_CURRENT_USER\Software\Wow6432Node\Mozilla\Firefox 50.0 Firefox HKEY_LOCAL_MACHINE\Software\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall\Mozilla (x 86 en - us)
ApplicationIcon HideIconsCommand ShowIconsCommand ReinstallCommand Installation directory PathToExe PathToExe Components Plugins ApplicationIcon HideIconsCommand ShowIconsCommand ReinstallCommand
Mozilla, please take note and to integrate them in your current "uninstaller" tool. Thank you.
IF I delete all the info on my old Mac, so it can be given, which will affect my new Mac?
Follow the instructions in > what to do before you sell or give away your Mac - Apple Support
I deleted all THE files of rendering but have still 1.5 TB of unidentifiable used disk space. I don't have FCPX libraries on my 3 TB drive. Total area of libraries: 650 GB still Get Info says I use 2 100 GB! Any ideas? Thank you.
I have deleted all THE files in my libraries FCPX rendering but have still 1.5 TB of unidentifiable used disk space. I don't have FCPX libraries on my 3 TB external drive. The total size of my libraries is 650 GB (when I add up the individual), but when I click on read the information for the reader, it says that I use 2 100 GB! It does not show that everything is on the disk. I went in each library individually in FCPX and deleted all THE files of rendering. Reducing the total size of several concerts, but there are still almost 1 500 GB difference.
I tried to copy all libraries on another drive and they occupy only 650 GB (with no unidentifiable used disk space). I'm a bit confused. Someone at - it ideas? I would like to release 1.5 TB that starting to use the new hard disk with only 650 GB and reformat the drive, but if there is some kind of hidden, important files on the original drive as FCPX needs to work properly I won't ruin the hundreds of hours I spent on editing. I hope that all makes sense. Thank you in advance.
I use an iMac 27 "with 3.4 GHz Intel Core i7, 8 GB of memory, NVIDIA GeForce 1024 MB graphics, OS X Yosemite 10.10.5, FCPX 10.2.2 3 TB Seagate USB 3.0 external hard drive designed for Mac and format Mac OS extended (Journal)
That doesn't sound right. The sound of back numbers compared to what could happen.
How can I delete all the files in a folder with a back order?
To get options for rmdir, at the command prompt do: rmdir /? MS - MVP - Elephant Boy computers - don't panic!
my disk c is full, even after ive deleted all the files and programs-im @51 concert, how to minimize that and or transfer part on drive d?
The next step is to reconcile the total for 31 736 Mo C (say 31 GB) to the 51 GB what you said earlier. The formula to reconcile these figures is:
Partition C + folder System Volume Information + Free space + file compression gain = ability to drive or partition
The figure of the free space are in the lower left corner of the Treesize window. What is the current figure.
To determine the size of the selection of folder System Volume Information start, Control Panel, system, System Protection, click Configure under Protection settings. What is the figure of the current use?
You say "Ive been running Ccleaner for a few years. You need to update to the latest version. In the version the most recent when you open the program, you will see a list of options. Click on tools, then system restore. You will gain disk space by deleting older schedulecheck points and all but the last marked a Windows Update.
A warning about cCleaner. Do not use the registry cleaner.
Maybe you are looking for
IF I HAVE APPLAIANCE ON DMZ LETS SAY OF E-MAIL SECURITY... DO I NEED TO ACL OR NAT BETWEEN THE DMZ TO LAN POLICY? OR SIMPLY POLITICAL NAT AND ACLS OF THE WAN TO DMZ... AND DMZ TO LAN WILL SPEAK WITHOUT INTERRUPTION
V715w printer Extremely poor color printing (if at all times); black and white pictures unclear, with white lines across. It began just a week ago. Using Dell Compatible cartridges (new) (chip) - this could be the source of the problem? Several alig
When I'm on Windows Vista, I had a photo gallery in which photos could be marked with keywords that allowed me to find a photo with a particular topic easily. My PC has been replaced by another using Windows 7. All my data from the old PC files wer
Hi all I am the only user and administrator of a laptop 2 years running Windows 7. Since a few weeks I'm having the following problem: Every time I try to do anything that requires administrator rights - anything with the small blue and yellow shield
I can't connect to the Internet, as it is frozen and seems like spam. I pulled the battery, reset, nothing worked