DELETE ARCHIVELOG ALL BACKED UP n TIMES does not work

Similar Questions

• EL Capitan automatic date time does not work

  People

  I use an El Capitan 10.11.5 MacBook Air version.

  I noticed that the data and time does not work even though it was set to auto to time.asia.apple.com.

  I ran these commands on a terminal

  $ping-c 5 time.asia.apple.com

  Ping: impossible to solve the time.asia.apple.com: Unknown host

  $ping-c 5 time.nist.gov

  PING ntp1.glb.nist.gov (64.113.32.5): 56 bytes

  64 bytes from 64.113.32.5: icmp_seq = 0 ttl = time 44 = 386,629 ms

  64 bytes from 64.113.32.5: icmp_seq = 1 ttl = time 44 = 307,532 ms

  tell me ping works but not for the server ntp - time.asia.apple.com

  $nslookup time.asia.apple.com

  Server: 192.168.1.254 address: 192.168.1.254 #53

  Non-authoritative answer: time.asia.apple.com canonical name = time - ios.g.aaplimg.com.

  time - ios.g.aaplimg.com canonical name = site time.apple.com.

  Site Time.Apple.com canonical name = time - osx.g.aaplimg.com

  $cat /etc/ntp.conf

  Server time.asia.apple.com.

  $ ntpq Pei

  No returned ID association

  Please, back up all data.

  Open the window of network preferences, if necessary, by clicking on the padlock icon in the lower left corner and entering your password. Cllck advanced, open the DNS tab and change the addresses of the servers as follows:

  8.8.8.8

  8.8.4.4

  It's Google DNS. Click OK, and then apply.

  In Safari, select

  ▹ Safari preferences... ▹ Confidentiality ▹ Remove All site data

  and confirm. If you use another browser, clear the cache memory. Test. Any difference?

  Notes:

  1. If you lose Internet access after the above change is made to your network settings, remove the Google servers in the network preferences pane, then click on the TCP/IP tab, then click on renew the DHCP lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must click on apply so that the changes take effect.

  2. I do not use Google DNS myself, but I tested it, and I do not recommend it or any other provider DNS; the addresses of the servers are only available for testing purposes. There may be privacy and technical issues involved in the use of this service, that you should personally study before deciding whether to retain the settings. Other public DNS services exist.

• I'm on windows 7 and I upgraded to 10.0.2 and now it does not open. I completely deleted firefox and transferred again, and it does not work. So my last attempt, I removed firefox 10 again and downloaded the beta version and once more nothing.

  I'm on windows 7 and I've upgraded to the latest version of firefox, and now it will not open. I completely deleted firefox and transferred again, and it does not work. Then, I was that he could get through my firewall, and that has not worked. So my last attempt, I removed firefox 10 again and downloaded the beta version hoping that would make it and once again, nothing. It opens at all. Please help - y at - it a live chat or a number to speak to someone at Firefox?

  -Microsoft got a big update last night for the Windows 7 and I came this morning I was wondering if the update would help my FireFox. I thought it might because a lot of things in this forum said it was a security problem and they have been updated with security updates. SHAZAM! Firefox is now the new my browser to goto. Very happy to resume. Once more I did anything this morning, but click the icon after the big windows 7 update and we're back in business. Thanks for all your help!

• Tap to talk time does not work on my watch

  Hey guys!

  Tap to talk time does not work on my watch.

  I know that his works only with Mickey/minnie.

  the watch is after unpari/pair, the "tap to speek" function is enabled (on the iphone and the watch)

  both are updated to the latest ios/watch OS and still...

  any ideas...?

  Thank you!

  Return on investment

  Hi King

  I suggest to wait until a few hours, leaving the face of Mickey or Minnie Mouse selected on your watch.

  My own experience (tested on two watches) is that the feature became available after waiting, without rebooting or unpairing / rematching of the watch. In one case, it took somewhere 3-5 hours, but you can see that the function starts working sooner than that.

  It can help to first turn the tap to set the time to stop, pause for a few moments and then turn it back on again.

• The date and time does not work.

  I have an iphone 5 c.

  The date and time does not work. This is the second time.  The first time was about 3 to 4 months again and now again after upgrade to iOs9.3.1.

  Even after trying to change it manually, time slows down or stops.

  Everyone has problems with their date and time?

  • Try a forced reboot: hold down the House and on the buttons until the unit turns off. Ignore the cursor off if it appears. Once completed, if it does not start on it own, turn off power with the key On. In some cases, it also contributes to double click the Home button and close all applications before restarting.
  • Restore factory settings (no backup)
  • Make an appointment at your local Apple store to have it checked.

• "Show my windows and tabs from last time ' does not work in version 3.6.8

  I select "show my windows and tabs from last time ' on the Options window - Panel general"when firefox starts", but it opens as my home page every time I start firefox.

  I tried this on two different computers. Both of them have the same problem.

  It worked fine in previous versions, but it does not work in version 3.6.8.

  If you use delete, search and download Firefox browsing history in Firefox 3.5 and later versions to clear the 'browsing history' the closing of Firefox then in restaurant tabs in the last session ("Save and exit" or "show my windows and tabs from last time ') does not work.

• Face time does not work since this morning if my wifi connection is fine and parameters also very well.

  IPhone 6, 114 GB, GB 72.6 available capacity. iOS 9.3.1

  Face time does not work since this morning. Connection Wi - Fi works very well

  Mamimisra wrote:

  IPhone 6, 114 GB, GB 72.6 available capacity. iOS 9.3.1

  Face time does not work since this morning. Connection Wi - Fi works very well

  https://support.Apple.com/en-us/HT204168

• The administrator password for all computers on the network does not work for ONE of the computers on the network

  original title: the computers of network/administrator password

  The administrator password for all computers on the network does not work for ONE of the computers on the network. I need to log on as an administrator to install software, but the password does not work. It works on other computers, but not this one. How is this possible and how can it be solved?

  Hello
  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the below sticky

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

• Documents folder deleted in error and start menu link does not work again

  In the folder tree pane (Vista Home Premium) it appeared that I had inadvertently copied double my completed application documents in the foledr of downloads, as it seemed that I had two copies of everything: waste of disk space. So I deleted the subfolder Documents of the record of downloads... and the main Documents folder are missing too! It's all the same thing. I don't understand why. But anyway. It wasn't in the Trash because there had been too much to go over there, so it is all definitely eliminated and lost: more than 8 GB :-(

  Therefore, the Documents link in the start bar stopped working. Even after that I created a new Documents folder in the same location as the original, the link on the start menu does not; When I click on properties for the link, the path is empty, and I can't find a way to save a path to it. Any ideas?

  The Document folder is a special folder that will be created in a special way.  Here is the procedure to correct a record that has not been created properly: http://www.vistax64.com/tutorials/90705-personal-user-shell-folders.html.

  Here is another article on how to restore a missing (like Documents) under Vista personal user folder: http://www.vistax64.com/tutorials/148461-personal-user-folder-restore-missing-folder.html.

  Between these articles, I think you should be able to solve your problem in one way or another.

  =================================================================================================================

  In case you're still interested in trying to retrieve the dossier of Documents initially lost, here are some options you can try:

  If you have Vista Business, Vista Ultimate or Vista Enterprise, you can be lucky.  They have so-called saves shadow copies, which are deleted or modified files that can be recovered in case changes/deletions made by mistake.  http://www.Microsoft.com/Windows/Windows-Vista/features/shadow-copy.aspx more information about how to use this feature to: http://blogs.techrepublic.com.com/howdoi/?p=145.

  If you have Vista Basic or Premium of Vista, shadow copies is not available; However, there is an alternative that is free and the shadow copies feature called Shadow Explorer. http://www.howtogeek.com/howto/windows-vista/recover-files-with-shadow-copies-on-any-version-of-windows-vista/.  Although it will not help you this time, it could very well save you in case this happens again.

  In case this does not work (not all files are available through shadow - it occurs periodically), here are some additional free recovery programs that might help:

  http://www.SnapFiles.com/freeware/system/fwdatarecovery.html (first try Recuva)

  http://www.SnapFiles.com/get/DiskDigger.html (try this second - if this fails too, then the chances of recovery are very slim, but we invite you to try other programs if you want)

  http://www.SnapFiles.com/get/easusdfr.html

  http://www.SnapFiles.com/get/restoration.html

  http://www.SnapFiles.com/downloads/Recuva/dlrecuva.html

  http://www.SoftPerfect.com/products/FileRecovery/

  http://techpaul.WordPress.com/2008/06/23/how-to-recover-your-lost-files/

  The files are not really deleted until they are crushed (although they are no longer available through conventional methods).  If you decide to try these recovery programs, you should stop using your drive hard immediately in order not to replace the data that you are trying to recover.  He slave on another PC and launch the recovery of this PC.  Even now you have definitely lost some of them if you use the same PC.  If you can not do this (slave on another PC), you run the risk of overwriting the data with every action you do on the PC (but you may still be able to recover some or most or even all files - it's a matter of luck).

  Only you can decide if the data is important enough to take the PC to an expert data recovery to recover files (they will have better programs and hardware to do that none of us do, and I've provided above).  Do NOT go to the Geek Squad or one of these centers of store-, they generally don't know what they are doing - it take for expert data recovery.  It will cost you a little and they generally offer no guarantees.  The decision is yours.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Family timer does not work for Windows 8

  I can view the activity report and check the websites visited, but everything doesn't seem to work properly.  The time settings and the curfew does not work and when I view the reports using pc is far from what is used.

  Hello

  I would like to you can check this post about delays on parental control. Refer to the post of Eugene_R.

  Time does not

  Moreover, in a resolution of the initial problem, I suggest that reconfigure you the account user. Here's how:

  In Windows 8, you can use accounts of Microsoft as a user. You just link the Microsoft e-mail account to the new standard user. Follow these steps:

  Note: Make sure that you have an internet connection to create a user with a Microsoft account.

  1. press Windows key on your keyboard to access the applications screen.

  2. tap create an account (you will be redirected to search application screen automatically).

  3. click on settings (second option with the gear icon).

  4. click on create an account on the selection to the left pane. (You may be prompted for access admin select an admin user, and then enter the administrator password).

  5. in the account management window, click Add a user account.

  6. you will be prompted to add a user, enter the Microsoft account email address in the text box then click on Next.

  7. check This is a child account? Turn on family safety for PC usage reports.

  8. click on Finish.

  After you create the child account, you can then go to the Family Safety website, log in using the parent account and then manage restrictions and control of your child options.

  Second: In case you want your child free of any restriction which actually an adult account, you will need to just make sure that he or she is not a member of the safety of your family to check on the Family Safety website. To remove a child, go to manage the list of the members of the family. Select the account you want to delete by checking the box on the right, click on remove, then confirm by clicking on remove again.

  In case you have problems after deleting the account as a child, please update the personal data of the account by connecting to https://account.live.com/summarypage.aspx.

  Note: If you are currently logged in using your account, you must open a session and re-enter your child's account.

  Thank you.

• HP Envy 5530 e-all-in-one: copy/scanning does not work

  All the functions of the printer/scanner worked before Windows upgrade Windows 7 10.  After 'upgrade' to win 10, scanner and copier functions are kaput.

  SYMPTOMS:

  Printer funtion still works

  * Copy funtion indicates "" Now"copy" but never active scanner.  Pressing Cancel does not stop the process.

  * Manual SHUT DOWN does not work with constant "Shutting Down" message.

  * Scan to the computer and scanning to E-mail functions do not work

  * Try to run Windows scan "does not recognize the HP profile" and cannot scan using Windows 10

  ACTIONS:

  * Initially received 'C4EBA230' message on the printer screen blue with flashing icons, but a hard reset solved error

  * Have completely uninstalled & reinstalled software base three or four times of HP and HP update disc once software has detected and installed

  * Ran HP, utility for troubleshooting several times before and after reinstalls for problems of scan - driver detected every time problem.   Ignore the results of audit of pilot and proceed to the verification of scan did not work

  * Performed four resets hard to return to the firmware with parameters.

  * Tried scanning HP and Capture app (Nope - message "Device is busy" - same device is not)

  * Voltage checked the cable power and the wall outlet (OK)

  * Checked ink levels (more than one half full)

  * Searched updates firmware (not available on HP support site for want 5530)

  Seems to me that it might be mutiple problems/possible solutions:

  Machine firmware problem?  n ' any means to reinstall the current firmware via a download?

  Mechanical scanner problem? -scanner engine bad/blown bulb? -where is the nearest HP Service Center authorized Texas?

  New driver development necessary to scan to computer compatibility with Windows 10? -C' you all of the problem

  Your diagnosis?

  Hi doktor,.

• All HP6210 in a Scanner does not work in Snow Lepoard.

  I upgraded my OS to Snow Leopard.

  I deleted all the old applications and drivers and redownloaded new drivers for the HP6210 all in one printer.  The printer works but I cannot scan any document.

  I tried using Image Capture too - but still does not work.

  When I scan of the device (in pdf format) Manager, I hear the scanner works, but and the popup error message "sorry, an unknown error has occurred."

  I went into System Preferences to find the scanner in the Print & Fax, HP6210 all-in One - on the scanning tab - it says no scanner found.

  Help, please.

  You have downloaded the software wrong (according to the link you posted).  This software is under 10.5 and will not work in 10.6.

  Uninstall and download this.

• my built in webcam used to work, but I think that one of my kids deleted something and now my web cam does not work what do I do

  my built in webcam does not work.i one of my kids deleted some how and now it does not work what do I do

  Hello

  Try doing a system restore. Go to the SEARCH bar and type system restore.
  Once the System Restore screen, select a restore point (it must be before the problem occurred), launch it. Check.
  You can also update the drivers of your computer (the webcam driver). If you do not know how to locate, you can use RadarSync to find out-of-date drivers.
  David

• I have a hp photosmart c7250 all-in-one wireless radio does not work

  I have a HP Photosmart C7250 all-in-one and the Wireless does not work.  When I try to go through the wireless configuration wizard, the test report shows the following - 'the wireless radio does not work.  Contact HP support.  Can you help me?

  We will reset the printer.  Turn the power off, hold it # and 6 keys all on again.  Go to Configuration > network > wireless network Test later to see if it worked.

• Delete the file as an attachment button does not work

  I have a form with a box the user can attach files. There are three buttons. To add a file to open the file to see it and the third button to delete the file that is highlighted in the drop-down list. Remove the button does not work. You see something wrong with my script?

  ADD A SCRIPT FILE

  MeetingMinutes.LogoControls.Attachments.Button1::click - (JavaScript, client)
  myDoc = event.target var;
  sFile var = "myFile" + NumericField1.rawValue;
  myDoc.importDataObject ({cName: sFile});
  myDataObject var = myDoc.getDataObject (sFile);

  sFileName var = myDataObject.path;

  ListBox1.addItem (sFileName, sFile);

  NumericField1.rawValue = NumericField1.rawValue + 1;

  OPEN THE SCRIPT FILE

  MeetingMinutes.LogoControls.Attachments.Button2::click - (JavaScript, client)
  try {}
  myDoc = event.target var;
  var sFile = ListBox1.rawValue;

  myDoc.exportDataObject ({cName: sFile, nLaunch: 2});
  }
  catch (e)
  {
  App.Alert ("Click on the file you want to open (select)," + "\n" + 'then click on the button to open the selected file' ");
  }

  REMOVE THE BUTTON SCRIPT

  MeetingMinutes.LogoControls.Attachments.Button3::click - (JavaScript, client)
  try {}
  myDoc = event.target var;
  var sFile = ListBox1.getDisplayItem (ListBox1.selectedIndex);

  If (sFile! == "") {}
  var nResponse = xfa.host.messageBox ("you are about to delete the attached highlighted file. \n\nDo you want to continue? ', 'delete an attachment ", 1, 2);
  If (nResponse == 4) {}
  myDoc.removeDataObject (sFile) + ListBox1.deleteItem (ListBox1.selectedIndex) + (NumericField1.rawValue = NumericField1.rawValue - 1);
  }
  } else {}
  xfa.host.messageBox ("no document selected. Click on the file to delete. ») ;
  }
  } catch (e) {}
  xfa.host.messageBox ("error in deleting of document");
  }

  Change var sFile = ListBox1.getDisplayItem (ListBox1.selectedIndex);

  TO

  var sFile = ListBox1.rawValue;

  Kyle