Delete connections when other computers connect to WRT 110

Similar Questions

• The other computers in my house not to see the family as a source for their internet connection network; How can I restore this connection by computers (non-hotes)?

  Since this morning, the other computers ('other' meaning other than mine, where "mine" is the one that has the connection to the router wireless connected to the internet) in my house does not "see" the family network.  In other words, only my computer has access to the internet.

  How to restore the network family when other computers are not 'see '?

  Looks like you are saying that your computer is connected to the wireless router, while other computers cannot.

  This is the router that "hosts" network, then maybe the wireless feature has been disabled somehow.

  Try restarting the router (unplug it for 30 seconds) and see if that helps.

  I hope that the problem will be solved.

  Al

• When I try to connect to the wireless router, it asks you the password I put it and he then asked again and will not accept the password. all other computers (without windows 7) connect correctly.

  My new computer has windows 7 when I try to connect it to my router it ask the password, then he asks the network password I put in the same password and it does not accept it. I spent ove an hour on the phone with a very helpful and confused expert to the Virgin. He tells me that the password only I need to communicate with the router is the main. We tried a lot of things all very technical and finally he gave up. Other computers with vista on connect very well with no problems at all.

  The network is fine and all the settings are fine. Occasionally, it connects via a home network but then it stops. When I try to communicate with the printer wireless signal stops and starts.

  I don't hold much hope of a response that experts were left very confused by this first abandoned after 45 minutes and the second lastered over an hour are totally flumaxed and blame windows 7

  But everyone told me that windows 7 was supposed to be the best

  Your post has nothing to do with the Windows Update feature (compared to the upgrade of Windows). Please repost it here for assistance: http://social.answers.microsoft.com/Forums/en-US/w7network/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• 0 x 80070035 and 0X80004005 error codes when you try to connect to other computers and devices on the same network - unable to connect to the shared devices.

  I have a network consisting of Windows 7 laptop computers, an XP laptop and a Wireless Linksys (Cisco) WRT610 N + N with storage attached to it via its USB port.  Your PC Windows 7 has, since I can see and access to other computers and devices on storage.  Since Windows 7 PC B I can not connect (via the file manager) to A PC or NAS storage network.  Get such as 0 x 80070035 and 0X80004005 error codes when you try to connect to the IP address on the device name.  When I ping the devices of PC B I have no trouble to achieve.

  I turned off all firewalls, added the LMHOST file entries and a myriad of other tests and still cannot connect to PC B devices.  I can surf the net fine and do everything else - simply cannot connect to other devices even if these other devices can connect to me.

  I was in there for 22 years and has worked as an engineer on major networks and the network I stem - anyone got any idead. I checked all the basics such as Netbios, file sharing etc etc.

  It took a reinstall (upgrade) to get actually it works again.

• I am not able to connect Stor-E for the other computers on my home network

  I just bought a Stor-E but I can't connect to other computers on my home network which I think is a Netgear router which is connected to my BT home hub.

  I can access the stor-e of my laptop and pc, but cannot access the Stor-E when I go to the working groups then on my PC it calls for a Net User ID and password have tried my user id and password for my pc but this doesn t seem to work.

  Someone has an idea what I am doing wrong?

  But in general your Stor-E works correctly when you connect it directly on different computers, right?

• MacBook Pro connects to the network, but other computers will be

  As of today, my Macbook Pro (approx. 5-6 years running Yosemite) has had problems to connect to my network, even if the other computers connect very well.

  On the menu bar, it shows that I am connected with a signal strong.

  My only guess is that the hardware is obsolete?

  Thanks to anyone who can offer help.

  What happens if you disable wifi then on again? Have you tried to delete the WiFi network preferences and put it back? What kind of messages if none pull you.

• I can not connect computer vista laptop to my network home, but I can connect to other networks. Other computers can connect to my home network very well. This can be corrected?

  My laptop runs Vista and I've not had problems connecting to my home network wireless until a week ago or not.  Then, trying to connect, I see other available networks, but not my own.  When I try to connect manually, it says that the network already exists.  Other computers, macbooks, are able to connect to my home network without problem.  I am able to connect to a network on my laptop fine unsecured wireless.

  I could 'solve' the problem or get reconnected with a restoration of the system to an earlier date, but it only lasts a day or two.  I searched for another fix and tried many things, including to reset the router, remove my network, and then reinstall, etc, but can't seem to get this to work as if it were - automatic connection as the first network.

  Any help would be appreciated.  Thank you.

  You have rebooted the router and the pc at the same time?

  You run the IPCONFIG / all from a cmd prompt can and download a preview of the output to a file share services like rapidshare and put a link to it in your next post?

• Windows 7 does not connect to other computers in the same homegroup network

  Computer is a Dell Latitude E6500 in good working condition. Printer is connected to a desktop computer running on Pentium IV with HP LasetJet 2100.  The Pentium IV is only for printing but must be able to make a link to it. All systems have max ram and large capacity disks. All systems are running Windows 7.

  Hello Willard,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. what happens when you try to connect to other computers? you receive an error message or code?
  2 update you installed before the show?

  Thank you to provide detailed information on the issue and your efforts to resolve.

  This problem can occur for the following reasons:

  -Network discovery may be turned off.
  -Password-protected sharing is turned on.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions contained in this Microsoft support article and check the issue.
  Reference:
  Why can't I connect to other computers?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-other-computers

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Win7 computer cannot connect to other computers Win7 network "\\computername is not accessible. You might not have permission to use this network resource ".

  I have a Windows 7 (box A) system that cannot connect to files shared on another computer in Windows 7 (box B).

  • On the 'network card' and 'See the network computers and devices', I can see box B of area A.
  • I can ping Box B of area A.
  • I can connect on MEDIA sharing on box B of area A.
  • Area C (another system of Windows 7) I can connect to the B area and am presented with a box of authentication to connect to the shares (i.e., box B works as it should).

  But the box has double clicking on box B or using \\computername or \\IP_Address the dialog box run, I get the error:

  ----

  \\computername is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.

  The network is not present or not started.

  ----

  I know that the system is available, because the area C can access... But something's not on the box... It cannot connect to zone B or C. Box

  I have disabled the firewall on both systems without result.

  I reinstalled the network adapter and Client for Microsoft Networks is installed on the box.

  Yet somehow box's not connection to other computers on the network.

  Any thoughts on what I should check would be appreciated.  Thanks in advance for the help.

  OK... so I was able to track down and get it fixed...

  I found another symptom (that would be a good way to check and see if you experience the same problem).

  In the network and sharing Center, I clicked on "Change advanced sharing settings" in the left column. I found that the radio button under "File and printer sharing" was put on the OFF position.  I started and saved the changes, but when I returned in these settings, it is once again in the off position.

  It turned out that the workstation service is set to disabled (which also caused the computer browser service for not being able to boot). I activated the workstation service, started, and set it to automatic.  Then did the same for the computer browser service.

  Both of these services running, the "File and printer sharing" it will remain actually on IT, and I am able to connect to other devices on the network in the way I had to.

  I can't mark this message as the solution (perhaps because I posted it?) so if someone he will quote as their response to the post office, I'll be able to mark as answer.

• connect other computers to the internet through an ad hoc network of a connection__ broadband windows 7

  I have a HP netbook with a Windows 7-based broadband connection.  I created a residential group of this netbook so other computers running Windows XP can connect to it and use the connection Strip.  I have inconsistent results.  Sometimes it works and sometimes not.

  My question how do I set up a gateway to the internet from the netbook to other computers can access the internet.

  Do I need to set up a network of residential group for this place?  Is there some settings of internet connection of the netbook I need to change (for now that I disabled the firewall, so it does not interfere).

  Thank you

  I do not use a router.  My netbook has a map broadband and a wi - fi card.  Simply, I connect to internet through my broadband card.  I tried other computers to be able to access the internet through that connection, that's why I've set up homegroup (maybe I would not do?)

  Anyway, sometimes it works but is not for most.  I'm trying to keep it simple and not get a router, etc. since it is a situation that's going to happen from time to time.

  Thanks for responding!

  Paula

  As posted earlier...

  To use your netbook as access wireless router/AP watch these GUI frontends to netsh commands that will do this for you. I do not think that you have ICS enabled to do so.

  http://virtualrouter.codeplex.com/

  http://www.Connectify.me/index.html

  ICS, in my experience there is a very long time is flakey at best...

  FWIW, there are routers broadband accepting adapters broadband videophone/USB/etc function for example. According to what broadband service, you have maybe one depending on your needs.

  MS - MVP Windows Desktop Experience
  "When all else fails try what the captain suggested before you started...". »

• Why other computers cannot connect to the internet with my ad - hoc connection?

  Hi all! Here's my situation.
  My friends router is dead and we are in the smack dab Middle no where with no transport and we want the internet.
  We have only an Ethernet however.

  Here's my situation.
  I want to create an ad - hoc network and share the internet connection using ICS. The problem is, when I secure my ad hoc network with WEP or WPA cannot connect to the network. The network is visible on the computers of my friends (mac and PC) and they put the password nothing is done.

  But here's the kicker, when I don't put no security on the network, everything works fine.

  How do I create an ad hoc ICS with security network and have not really work?
  Thank you guys!

  Hello

  Thanks for posting. If I understand correctly, you experience the problem with the connection of computers using the Ad - hoc network. Correct me if I'm wrong!

  Before I continue, I would like to collect some personal information on the issue.

  1. what security software is installed on your computer?

  2. share your protected password put on or off?

  The sharing tab is not available if you have only a WLAN card.

  Method 1:

  Follow the link below and set the ad hoc network.

  Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Set up a wireless network without router

  http://www.Microsoft.com/windowsxp/using/networking/setup/adhoc.mspx

  Method 2:

  After you follow the steps above to set up ICS on the host computer, make the following changes on other computers (but not on the host computer).

  (a) open Internet Options by clicking the Start button, clicking Control Panel, clicking network and Internet, and then clicking on Internet Options.

  (b) click on the connections tab, and then click never establish a connection.

  (c) click on LAN settings.

  (d) in the dialog box settings of the network Local (LAN), under automatic configuration, clear the check boxes automatically detect connection settings and use automatic configuration script .

  (e) under Proxy Server, clear the use a proxy server for your LAN check box, and then click on OK.

  If the password protection sharing is disabled, I suggest to turn on you or so try if this can help fix the problem.

  Method 3:

  Follow these steps and check if that helps.

  (a) click Start, type Control Panel in the search box, press ENTER.

  (b) click on network and sharing Center, click change advanced sharing settings in the left pane.

  (c) click on him to expand the network profile (type) that you want to turn sharing on or off for protected by Word.

  (d) select (dot), turn on password protected sharing.

  Visit these links for more idea on the Internet connection sharing between computers connected on an Ad - hoc network:

  Set up a shared Internet connection using ICS (Internet Connection Sharing)

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-shared-Internet-connection-using-ICS-Internet-connection-sharing

  Change the settings for ICS (Internet Connection Sharing) Internet

  http://Windows.Microsoft.com/en-us/Windows7/change-Internet-settings-for-ICS-Internet-connection-sharing

  More information on:

  Using ICS (Internet Connection Sharing)

  http://Windows.Microsoft.com/en-us/Windows7/using-ICS-Internet-connection-sharing

  Reply back with the results. I'd be happy to help you further.

• I have all these other computers connected to my internet how I remove them

  I have all these other computers connected to my internet how I remove them

  Hello

  Please do not type in capital letters because it's difficult to read and considered to be shouting.

  Check with support from the manufacturer of your router to reset the SSID and password - most have
  excellent online help and forums.

  ---------------------

  Better to use WPA/WPA2 security if they are available and you can hide the SSID that will help
  help others to see the network (note on some routers more hide the SSID)
  causes of connection problems and if they find out the name he is more useful).

  Wireless network general recommendations of security for individuals
  http://theillustratednetwork.MVPs.org/LAN/SoHoWirelessSecurity.html

  Introduction to wireless network security
  http://netsecurity.about.com/od/Hackertools/a/aa072004b.htm

  10 tips for Wireless Home Network Security
  http://compnetworking.about.com/od/wirelesssecurity/TP/wifisecurity.htm

  Securing your wireless network
  http://www.practicallynetworked.com/support/wireless_secure.htm

  How to secure your router Linksys Wireless - similar can be used for other routers
  http://www.pctipguys.com/index.php?option=com_content&task=view&ID=57&Itemid=36

  What are the different wireless network security methods?
  http://windowshelp.Microsoft.com/Windows/en-us/help/b385cc8a-AF25-489e-a82e-decf6df26b681033.mspx#EZB

  ----------------------

  These elements Vincenzo mentioned for XP also apply to Windows 7 but it does
  provide greater security.

  Vincent's blog
  http://blogs.dotnethell.it/Vincent/checking-forHelp-with-spyware-malware-and-Hijackware__4820.aspx

  Internet Explorer 8 - security
  http://www.Microsoft.com/Windows/Internet-Explorer/default.aspx

  Checklist of security for Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/security-checklist-for-Windows-7

  Windows 7 security enhancements
  http://TechNet.Microsoft.com/en-us/library/dd560691.aspx

  TechNet - Security Center
  http://TechNet.Microsoft.com/en-us/security/default.aspx

  Windows 7 security Primer (part 1) (see the links in the article of part 2 and 3)
  http://www.windowsecurity.com/articles/Windows-7-security-primer-part1.html

  Windows 7 security enhancements
  http://TechNet.Microsoft.com/en-us/library/dd548337 (WS.10) .aspx

  Steve Riley discusses the security features of Windows 7 to the RSA
  http://www.Microsoft.com/video/en/us/details/3bce5c98-CE93-46b5-9a1a-3a2914059ad1

  Windows 7: explore new and improved security features
  http://www.Microsoft.com/security/products/Windows7.aspx

  Windows 7: security and Protection
  http://TechNet.Microsoft.com/en-us/library/dd571075 (WS.10) .aspx

  A Guide to Windows 7 security
  http://www.PCWorld.com/businesscenter/article/171979/a_guide_to_windows_7_security.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• My wireless on my laptop will read the files on my desktop but I can't connect to the internet, my lapto electrician iI unless other computers work well

  My wireless on my laptop will read the files on my desktop but I can't connect to the internet, hard wire my laptop iI unless other computers work fine

  The following diagnostic information:

  1. Connect your laptop wireless so that you can "read the files on your desktop."
  2. Open a command prompt window (start > run > cmd > OK)
  3. Type the following command in the black command prompt window and press enter

     ipconfig/all > "% userprofile%\Desktop\testdata.txt".

  4. Let the window open orders and "hard wire" your laptop to connect to Internet
  5. Type the following commands in the black command prompt window and press ENTER after each one

     ipconfig/all > "% userprofile%\Desktop\testdata.txt".
     Notepad '% userprofile%\Desktop\testdata.txt '.

  6. Copy and paste the contents of the testdata.txt file into your answer here

  Please note that there are 2 for the second command ipconfig > characters.

  You can close and remove testdata.txt (which is located on your desktop) and close the command prompt window.

• Widows xp intsaller recently, cannot connect to the internet. All other computers in house work very well

  Recently, install Windows XP Home and unable to connect to the internet. I have reset the modem, router and all my other computers work, but I installed XP on. Please help I need this pc for work.

  Thank you

  Lynn

  You reinstall the network drivers?

• No wifi connection have the connection with other computers

  Unable to connect to internet with wifi connection ok with the ethernet cable.    disabled Kaspersky antivirus (no change) have used the restore of the system (no change) I have two other computers and connection ok.   Have tried internet explore and Google Chrome - neither work.   With Google Chrome get error 106.   Uninstalling Google Chrome (no change)

  Hello

  Did you change your computer?

  I suggest you to see the links and check.

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  See also:

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions