delete history of update in windows vista

Similar Questions

• Permanently delete updates for Windows Vista

  I continue to receive updates for the points I have not and would like to put an end to their reception.  More precisely: to security update for 2007 Microsoft Office System, which I have on my computer, and Office XP Service Pack 3 that fails whenever I try to install it.  My version of Microsoft Office dates back several computers.  It is 2002, which works well for my needs.

  Is it possible to stop get updated, I don't want or need?

  I have HughesNet, subject to the FAP, and updates Windows Vista me close on the first day I got it.

  Also, is there a way to set the function to download between 02:00 and 7:00 AM EDT?  I can put the installation between these hours, but updates continue to download when they want.

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  You are in the Forum updates to Windows Vista.

  Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• I get a repeated error on install Platform Update For Windows Vista (KB971644). Fails with the error code 80073AA2. Installation comes from Windows Update.

  Windows Update loops round and round constantly to not set up correctly, then restores the changes

  Do I need to install the System Update Readiness Tool KB 947821?

  Probably not: I had a lot of doubt that SP2 is installed if KB947821 has not already been installed.

  Given that this problem is after a fairly recent install of SP2...

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack <=pick this=""> ).

  In the case opposite & whereas KB971644 is NOT a security update, you can simply hide the "thing":

  1. stop the automatic updates service:

  Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > Right click on run , and then select run as administrator >
  (type or copy/paste) %windir%\SoftwareDistribution > [OK]
  Open the download folder and delete its content
  Close the window.

  3 start | Control Panel | System maintenance and (if you use Classic view, skip this step). Windows Update |  View the updates available (or Select the updates installed): right click on the (platform) update for Windows Vista (KB971644) | Click hide update | Confirm the prompt UAC (User Account Control), if any, & OK your way out.

  4. start the automatic updates service:

  Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
  Double-click automatic updates > click Start
  (Stopping the service will take a moment)

  =====================================
  To restore/show updates for Vista: Start | Control Panel | System maintenance and (if you use Classic view, skip this step) | Windows Update | Restore hidden updates: Find and select the update you want to install. Click restore. You can now select once again it and install through the normal process.

  NB: If KB971644 were available for download/installation manual (and is not), I would have you try it.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and the second time error code 8007000D

  In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and error code 8007000D twice. How can you help me solve this problem

  0X8007000D ERROR_INVALID_DATA

  Try to manually download the update and installation
  http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB972145&displaylang=en&sType=s_basic

  It will not appear in your history after a manual installation, but it will show the updates installed in view area. TaurArian [MVP] 2005-2010 - Update Services

• 53 updates to Windows Vista and now screen keeps saying that it configures updates, then it restarts and the wont do anything else

  After using no not my laptop for some time, I turned on and 53 updates to Windows Vista. Went through the whole process, then got to the updates configuration screen and the laptop keeps restarting and it won't do anything else.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  ___________________________________________________________________

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• KB2398382 and updates on Windows Vista 32-bit - KB971029 offered several times after successful installation

  original title: KB2398382 and KB971029 updates on Windows Vista 32-bit

  My PC is running Windows Vista 32 bit.  KB2398382 and KB971029 were listed as installed successfully in the history screen to update windows since February.  However, it is always offered and intalled daily and shown every time successfully.  If it has been installed correctly, why it keeps appearing as important update?  Please help me to get rid of these two updates.

  Hello

  You can follow below link that can help you to solve your problem:

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
  http://support.Microsoft.com/kb/910339

• Satellite L300 - I can not install an update for Windows Vista

  I can not install an update to Windows Vista after you restore laptop (satellite L300) to factory settings. Tried to install with automatic updates and download of the update on your computer. What auto-update error: 8024 to 000.

  When you try to manually install SP1 getting error: 0800FFFF. I tried to disable the firewall, Defender and the UAC. Someone with such ideas?

  The Windows Update 8024 A 000 error Code means THE NOSERVICE WU E. This translates as UA was impossible for incoming calls to THE service.

  I would like for you to perform general troubleshooting steps for Windows Update.

  This diagnosis is generally applied to all Windows Update related issues.

  Stop Windows Update services *.
  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. If you receive a user account control notification simply click on continue.
  3. at the command prompt, type the following commands and press ENTER after each command.
  net stop wuauserv
  net stop bits
  net stop cryptsvc
  4 Please, do not close the command prompt window.

  * Rename Windows Update records *.
  1. at the command prompt, type the following commands and press ENTER after each command:
  2 ren %systemroot%\System32\Catroot2 Catroot2.old
  3 ren %systemroot%\SoftwareDistribution SoftwareDistribution.old
  4 Please, do not close the command prompt window.

  Registration of DLL's on Windows Update *.
  1. Please copy and paste the following text in a new Notepad document and save the file as WindowsUpdate.BAT
  2 if it is registered correctly the icon will go from a Notepad file in .BAT file which has two blue toothed wheels as its icon.

  Restarting Windows Update services *.
  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. If you receive a user account control notification simply click on continue.
  3. at the command prompt, type the following commands and press ENTER after each command.
  net start wuauserv
  net start bits
  net start cryptsvc
  output
  4 now, please check the updates via Windows Update to determine if the problem has been resolved.

• Installation of updates for Windows Vista error 80070490 message code

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  I cannot install the following important updates for Windows Vista and I get the Error Message Code 80070490; can all help me please these problems?

  Update security for Windows Vista (KB2378111)

  Update security for Windows Vista (KB967723)

  Update for Windows Vista (KB2345886)

  Update for Windows Vista (KB2443685)

  Update for Windows Vista (KB970430)

  Update for Windows Vista (KB972145)

  
  

  
  

  
  

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  I cannot install the following important updates for Windows Vista and I get the Error Message Code 80070490; can all help me please these problems?

  Update security for Windows Vista (KB2378111)

  Update security for Windows Vista (KB967723)

  Update for Windows Vista (KB2345886)

  Update for Windows Vista (KB2443685)

  Update for Windows Vista (KB970430)

  Update for Windows Vista (KB972145)

  
  

  
  

  
  

  Hey grown-sexy

  see if the below microsoft information arranges

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  If he did not correct it repost in the correct windows update forum below

  It comes to the installation of vista operating system instance

  Use the link below

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller

• 80070020: updates for Windows vista for x 64-based system

  When installing KB973917 updates for Windows vista x 64 based system I get the error code 80070020

  0 x 80070020

  STIERR_SHARING_VIOLATION the process cannot access the file because it is being used by another process

  You receive a "0 x 80070020 the process cannot access the file because it is being used by another process" error message when you try to download an update from Windows Update or Microsoft Update

  http://support.microsoft.com/default.aspx?scid=kb; EN-US; 883825>

  see if that helps.

• Update for Windows Vista platform

  I saw the thread on "platform update for Windows Vista" I ran the update still says the same thing when I try to install live messanger or mesh 2011, any ideas? I hope!

  You can find public support for installation/upgrade to Windows Live Essentials 2011 in this forum: http://windowslivehelp.com/forums.aspx?forumid=a372972e-8e7a-4d85-adc3-a1b43e8c02ec

  System requirements Windows Live Essentials 2011
  http://explore.live.com/Windows-Live-2011-system-requirements

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error 80070570 code when you try to install the update for Windows Vista for x 64-based systems (KB972145)

  I'm unable to install the update for Windows Vista for x 64-based systems (KB972145).  Whenever I try, I get the error code 80070570.

  0 X 80070570 - ERROR_FILE_CORRUPT
  The file or directory is corrupted and unreadable.

  Perhaps it is the update itself that is corrupted, try to manually download and install the same:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=4633c489-A128-441F-803a-d0623edb5667&displaylang=en

  If this does not work maybe reset - WU
  http://support.Microsoft.com/kb/971058/en-us
  How to reset the Windows Update components?

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Failed to update for Windows Vista KB21410007

  I can't install the update for Window Vista KB21410007. I have tried both manually and automatic installation. Can I download the update and after I restarted my computer to complete the update, there is a message that says something like: coming back from changes, update could not install

  Perform a clean boot to disable all third-party applications. This is to find out if there are third-party applications or services, the cause of a conflict.

  Refer to: how to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  Now, try and install the update.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Update for Windows Vista KB980248: 80070017__ error Code

  I tried to install the update for Windows Vista KB980248 but receive the error Code:80070017

  "There was a similar issue, published with the proposed solution, being (1)" run the Chkdsk.exe too check the drive for errors"and 2" rename the download folder.  The two were not successful.

  I also tried a number of different methods as suggested by MS technical support (see below), but none succeeded, so I hope someone else has also encountered this problem and has a solution.

  The steps I've already done: clean boot. downloaded and installed the update manually; high my privileges as a user profile; Services activated window important; disabled user account control; Run the component tool to reset Windows Update in default; Not Windows Installer and then re-recorded Windows Installer; use the System File Checker. installed the updated system preparation tools.

  Any help appreciated

  After reading the process to carry out a repair for Vista installation, I was not confident I could do given my lack of COMPUTER skills and feared that I would have done something wrong.  But while browsing the site there are other suggestions that I adopted. For example, I downloaded Registry Booster, ran the System File Checker (which I had already done but thought, no harm to do again), and other suggestions are in response to similar questions like mine.  I also ran an another Chk Dsk (I also run this previously).  To restart, as he was driving through the verification process, he said,' windows replaced bad cluster in file name \window\winsxs\x8A9C8~1.226\ 8915cambria.ttc'.  And I was happy, because it was the file you advised has been damaged.  I don't know exactly how it happed, as I said, I had perfomred chk dsk a numer of times before.  I was successfully able to install the update for Window Vista KB980248!  I was so happy after all the anxiety.

  Thank you very much Andrew, for your time, assistance and patience. Very much appreciated.

  What about the King

• Cumulative update for Windows Vista...

  There are several updates, called "Cumulative Security Update for Windows Vista" that whenever I have download interrupts me to use Internet Explorer 7. I have no problem download from this but find myself constantly having to uninstall these updates after installation. It's a hassle and they never go (which means that I always wonder to install). When I say cut, I mean I open the browser, but it gives me an error of loading of the page. I have a WiFi connection and make sure that I am connected, but it still says that I'm not. I also have problems with Internet Explorer 8, which after installation cannot be used because it gives me an error of loading of page and constantly suggests that I am not connected to the internet. I'd love to have my laptop Compaq in the shape of the top end and as secure as can be but I can't with these issues, and often, I decline to make the updates for this reason. If you can help me with these questions, because I promise you that I have did everything in my power so please do! If not, then I can live with this POS a bit longer ;)

  Thank you in advance!

  You should have (1) uninstalled Norton free trial, (2) download / run the Norton removal tooland then (3) installed Webroot Antivirus with Spysweeper (?) BEFORE the Norton free trial period had expired. (Too late now).

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "ofhttp://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029

  NB: The Norton free trial will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the Norton removal tool before installing updates, Windows Service Packs or updates to IE AND BEFORE installing your new antivirus application (for example, Webroot Antivirus with Spysweeper).

  If you need help, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error code 646 when installing the automatic/important updates for Windows Vista (with Service Pack 2)

  Recently, I received 646 error code when you try to install the important/automatic updates to Windows Vista. What patches are there for this issue? What risks are there to do not overcome this problem?

  rivercitylady,
  Usually with the code 646 error, if you download the update and install it manually that will fix the problem.
  Go to the Microsoft Download Center and search for the number of the update has failed.  Download on your PC, then run it from there. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.