delete mutiple files problem

Similar Questions

• I just want to know if there is a problem if I delete the files '%Temp%' race

  Hey guys, I just want to know if there is a problem if I delete the files '%Temp%' run! ???

  Free disk space
  Last updated 18/01/2014
   

  Content

  • To see how much space you have used and free
  • To see where the files are too much space
  • Disk Cleanup
  • System restore
  • Fix the basket
  • Fix temporary Internet files
  • Delete files in the system and the folder Temp of Service Profiles
  • Check the size of the swap file
  • Disable the hibernation
  • Compact the Windows databases use various
  • Delete the files updated by the Service Pack
  • Move your Documents
  • Remove saved files created by Photo Gallery
  • Which extends the size of the disk
  • Compress files
  • Turn off the low disk space warnings
  • Boost disk cleanup
   

  To see how much space you have used and free

  Start - All Programs - Accessories- Click with the right button on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  For the system drive

  WMIC volume where (DriveLetter = '% lecteur_systeme %') are legend, capacity, freespace List

  For all readers

  WMIC volume get/all, freespace, the ability, the legend

  If you want to store this info on your desktop

  WMIC /append:"%userprofile%\desktop\Free on disk space" volume get Caption, freespace format:htable

  To open double click on Free Disk Space on your desk or type

  Start "" "%userprofile%\desktop\Free report.HTML of disk space.

  Then come back here after cleaning and repeat these commands to see the difference.

  If for any reason, the wmic command does not work, use these two commands. Both take a lot of time.

  % Lecteur_systeme % - one defrag

  or

  dir %systemdrive%\*.*/a/s

   
  To see where the files are too much space
   
  It lists the number of files and the size of the folders on your drive. Each command is a subset, so you can run it better.
   
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   
   
  Then configure the command prompt. Right-click on the tab of the titlebar - Properties - Layout command prompt - and enter 1000 screen buffer size height and 43 (or 50) to Window Dimensions height. Change the color (color tab) and the police (police tab), if you want.
   
  To see the size of the folders in Documents, excluding images, video, or music files.
   

  for /f "Skip = 2 tokens = 3 ' set doc = A %%A in ('Reg query"HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"/v"Personal"")

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "\/"^|findstr/l/v "photos video" ') @echo %j & echo. "

   
  To see the size of the folders in the music.
   

  for /f "Skip = 2 tokens = 4" %A in ('Reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v 'My music' ") set Doc = A %

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   

  To see the size of the image files.

   

  for /f "Skip = 2 tokens = 4" %A in (' Reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" "My pictures" /v ") set Doc = A %

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   

  To see the size of the files in the video.

   

  for /f "Skip = 2 tokens = 4" %A in ('Reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v 'My videos' ") set Doc = A %

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   

  To see the size of the files on the desktop.

   

  for /f "Skip = 2 tokens = 3 ' set doc = A %%A in ('Reg query"HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"/v"Desktop"")

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

  To see the size of the files in the Windows folder.

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("'%windir%' dir /a /s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   
  To see the size of the files in the Program Files folder.

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("'%ProgramFiles%' dir /a /s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   

   

  Disk Cleanup
  To run Disk Cleanup, normal is to click with the right button on the drive in my computer (Start menu - computer), then Properties - general tab - Disk Cleanup button.
   
   
  Another way is menu Start - All Programs - Accessories - System - Disk Cleanup tools.
   
  Disk Cleanup can be started from the command line.
   

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

   
  To make your primary drive.
   

  cleanmgr letter

   
  Choose which lead to do.
   

  Cleanmgr

   
  See the last section of this post to see how to performance of disk cleanup.

   System restore

  With disk cleanup displays above the Other Options tab. You can delete all but the last System Restore point and see if that is too much space.

  System Restore uses 15% of the space normally. Change click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit and navigate to

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRestore\cfg

  Double click on DiskPercent and click on decimal and change the value to the desired percentage,

  You can change the command prompt.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see the size of the system restore folder.

  You don't normally have access to this folder. You will need to take possession, allow administrators to permission, then the size of the query.

  takeown /f "%systemdrive%\System Volume Information" / a r d y

  ICACLS "%systemdrive%\System Volume Information" / grant administrators: f, t, c, q

  dir "%systemdrive%\System Volume Information" / a/s

  To see the current percentage

  Reg query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRestore\cfg" /v DiskPercent

  It is in hexadecimal. The numbers are 0-9 and a-f. So 0xf is 15. 0x5 is 5, 0 x 9 is 9, 0xa is 10, 0 x 14 is 20.

  To set a different value.

  You can use decimal values to set. This affects 10% (in bold in the example and the last item in the line).

  Tracking Add "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRestore\cfg" /v DiskPercent /t REG_DWORD /f /d 10

   
  To repair the system restore, file delete and restart the system restore.
    

  SC stop vss

  takeown /f "%systemdrive%\System Volume Information" / a r d y

  ICACLS "%systemdrive%\System Volume Information" / grant administrators: f, t, c, q

  e "%systemdrive%\System Volume Information" / q/s

  SC start vss

  Fix the basket

  Sometimes, files get lost in the trash. Remove the storage folders. It will be automatically re-created next time you delete a file or open the Recycle Bin. It will remove the trash and the files it contains for all users.

  Empty the trash.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see the size of the files in the Recycle Bin

  It must have one or no files inside if you work. There should be a directory (folder) by user.

  dir % systemdrive%\$RECYCLE. BIN\ *. * /a /s

  To reset the trash

  e % systemdrive%\$RECYCLE. BIN/s/q

  Fix temporary Internet files

  Sometimes, files get lost in the temporary internet files folder. Delete the files. It will be automatically recreated the next time download you. It will remove the current user only.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see the temporary internet files size empty files folder

  RunDll32.exe InetCpl.cpl, ClearMyTracksByProcess 8

  dir ' %userprofile%\AppData\Local\Microsoft\Windows\Temporary Internet Files\ *.» * ' / a/s.

  Then delete.

  First close Internet Explorer. Some files may not remove at the moment, they can be deleted later.

  "%userprofile%\AppData\Local\Microsoft\Windows\Temporary Internet Files" del /s /q

  So to see the new size.

  dir ' %userprofile%\AppData\Local\Microsoft\Windows\Temporary Internet Files\ *.» * ' / a/s.

   
  To see the size of the cache, type the following
   

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

   

  Reg query /v "Settings\5.0\Cache\Content Software" CacheLimit valid

  Use the calculator to convert hexadecimal into decimal. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter the value returned above. Menu display - decimal. To convert windows units divide by 1024 for kilobytes, divide by 1024 megabytes.
   
  Located between 50 MB and 250 MB. You can use decimal here. The unit is expressed in kilobytes. Here it is 250 megabytes (250 000 x 1024 bytes)
   

  Add tracking 'Software Settings\5.0\Cache\Content' v CacheLimit valid /t Reg_DWord /d 250000 f
  

    

  Delete files in the system and the folder Temp of Service Profiles

  The system temp folder is only used when no one connects. It is rarely used but never cleaned. Some services have their own temporary folder which is also cleaned.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To the list

  dir c:\windows\temp C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp C:\Windows\ServiceProfiles\LocalService\AppData\Local\Temp/a/s

  To remove

  del C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\*.* C:\Windows\ServiceProfiles\LocalService\AppData\Local\Temp\*.* c:\windows\temp\*.*/s/f/q

  Check the size of the swap file

  As a rule generally you want to your swap file slightly larger than the amount of memory that you have. It develops automatically but spread automatically. If you use hungery memory programs as this video editing should be bigger. If too big you can reduce and rush of space can be moved to another drive.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see what was your use

  WMIC pagefile get List

  To see the size of the file on disk

  dir /a c:\pagefile.sys

  To change the size or change the road see change the size of virtual memory in Start - Help and Support.

   

  Disable the hibernation

  The file shows up is the same size of installed memory. If this is not the case, turn off the computer in hibernation and save a lot of disk space.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see if it is on

  If the file will be found. If off the file won't be there.

  dir %systemdrive%\hiberfil.sys /a

  To turn off

  powercfg-h off

  Make a u-turn

  powercfg-h on

  Compact the Windows databases use various

  You can compact the various databases that Windows uses. This is the Windows Update, Windows Search, and certificates of security, Windows Mail, Windows Contacts, Windows, Windows Live and Internet Explorer ver 10 applications calendar.

  Close Windows Mail and Internet Explorer. Wait a minute for Internet Explorer release locks of sound files.

  See how much space taking up type which is below and note the total size (because it scrolls away).

  Start - All Programs - Accessories- Click with the right button on command prompt and choose Run As Administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  dir c:\*.edb c:\*.msmessagestore c:\WebCacheV*.dat c:\catdb/a/s

  Then at compact

  SC stop wuauserv

  stop bits SC

  SC stop wsearch

  SC stop cryptsvc

  for c:\ /r %A in (*.edb *.msmessagestore WebCacheV*.dat catdb *.) do esentutl.exe /p "%A" / o

  for c:\ /r %A in (*.edb *.msmessagestore WebCacheV*.dat catdb *.) do esentutl.exe /d "%A".

  SC start cryptsvc

  SC start wsearch

  SC start bits

  SC start wuauserv

  Then to delete some temporary files.

  del c:\*.integ.raw c:\TEMPDFRG*.edb/s

  To see the new size and compare it to the old size

  dir c:\*.edb c:\*.msmessagestore c:\WebCacheV*.dat c:\catdb/a/s

  If a program has a file open, you can use this procedure to find out which program.

  openfiles/local on

  Reset

  openfiles/query /v | findstr /i "WebCacheV [0-9] *------catdb \.edb \.msmessagestore .dat".

  Delete the files updated by the Service Pack

  See how much space taking up type which is below and note the total size (because it scrolls away). Also, note that the total is higher than it actually is.

  This will remove the ability to uninstall service packs.

  According to the service pack that Windows was provided with you can have both, one or none of these two files.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  dir /a /s c:\Windows\WinSxS

  Then type

  Vsp1cln.exe

  COMPCLN.exe

  To see the new size and compare it to the old size

   

  c:\windows\WinSxS dir /a /s

  Move your Documents

  If you have another disk, you can move the documents folder to it.

  Click with the right button on your Documents (or pictures, etc.) Office, videos, Contacts,) the tab file - Properties - location - move.

   

  Delete the thumbnail and icon Caches

  These files can contain thumbnails or icons of files deleted a long time ago. The files will be recreated if necessary.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste). The desktop and the start menu will disappear briefly.

  To see the size

  dir "% userprofile%\AppData\Local\*.db" "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db" /a

  then remove

  Taskkill /im explorer.exe/f
  attrib - r s h '% userprofile%\AppData\Local\*.db '.

  
  attrib - r s h '% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db '.
  del "% userprofile%\AppData\Local\*.db".
  del "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db".
  Explorer

  to check the new size

  dir "% userprofile%\AppData\Local\*.db" "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db" /a

   

  Remove saved files created by Photo Gallery

   

  Photo Gallery Windows makes a copy of any file that you are editing. Click Start - All Programs - Accessories - (or press the Windows key + R). Type

  Images of the hull: original

  Delete the ones you don't want.

  Which extends the size of the disk

  If all the space on the disk has not all been used it is possible to extend your drive.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  DiskPart

  then type

  Select the c volume:

  Then type to see in size

  the list volume

  then (it will work if possible or not as appropriate)

  extend

  type to display the new size

  the list volume

  then type exit

  output

  If you want advice on the extension of the partition type the following and paste the result back

  DiskPart

  list disk

  the list volume

  Select disk 0

  partition from the list

  Select disk 1

  partition from the list

  output

  To copy the final text right click in the window - Mark , then select the text and press enter.
   

  Compress files

  There are two ways to compress files in windows. Zip files and built-in file compression. It's built-in file compression. For more information on compression type zip in Start - Help and Support .

  Photos, music and video are already compressed. They can get larger if Windows tries to compress it any further. Also usually a bad idea to compress system files.

  If you have files of worksheet they can very well be compressed. If you have files, installation files, they can also be good candidates. Web pages are also good candidates.

  In Windows Explorer, blue file names means Tablet (it is the file system compression not aka zip files compressed files). Green filename means Encrypted.

  To disable file names colored, in Explorer - Tools menu (Alt + T)- display tab and then clear the check box for Show encrypted or compressed NTFS in color .

  Windows compression, encryption and security to work for the most part by applying attributes to a folder and the files in the folder inherit the folder.

  If you have all the files appropriate for compression, find them in solution, made Explorer right click - Properties - general -Advanced button tab - Compress contents to save disk space. Choose to apply to all files and folders when asked.

  To use a command line to compress the files in the Favorites folder.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  compact/c /s:"%userprofile%\Favorites." *

  Put in Favorites to compress files added

  compact/c /s:"%userprofile%\Favorites.

  To view the details of the compression of the Favorites folder

  Compact '% userprofile%\Favorites\*.* '.

   

   

  Turn off the low disk space warnings

  To disable the function to display the disk low space warnings.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer" v "NoLowDiskSpaceChecks" /t REG_DWORD /d 1 f

  gpupdate/force

   

  Boost disk cleanup

  • Operation of disk cleanup
  • Schedule disk cleanup
  • Creating custom cleaners

  To see a list of products of cleaning disk cleanup.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  @echo. & @echo list of cleaners&@echo = & FOR /F "usebackq tokens = 8 delims =-' %i IN ('reg query 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\VolumeCaches'") @echo %i

  
   List of cleaners
   ================
   Active Setup Temp Folders
   Content Indexer Cleaner
   Downloaded Program Files
   Hibernation File
   Internet Cache Files
   Memory Dump Files
   Microsoft_Event_Reporting_2.0_Temp_Files
   Offline Pages Files
   Old ChkDsk Files
   Previous Installations
   Recycle Bin
   Setup Log Files
   System error memory dump files
   System error minidump files
   Temporary Files
   Temporary Setup Files
   Temporary Sync Files
   Thumbnail Cache
   Upgrade Discarded Files
   Windows Error Reporting Archive Files
   Windows Error Reporting Queue Files
   Windows Error Reporting System Archive Files
   Windows Error Reporting System Queue Files
   WLX Thumbnail Cache
  

   

• When you delete files (in Windows 7) Explorer hangs on 'calculate' the size of the files to delete. This problem also occurs in Windows Vista (out and included SP1).

  When this problem happens:
  * You try to delete files, from any folder: a folder user protected (such as your desktop), a protected windows folder (such as program files) or an unprotected folder you created yourself (for example, a folder named "test" on your C permit)
  * The problem only occurs when you try to delete files using Windows Explorer. The problem only IS NOT OCCUR when you delete the files from another system using one hand (log on to another computer, open a shared folder, for example by opening \\windows7system\c$\test and try to remove this folder).

  What's happening:
  * Explorer crashes when 'Calculating' the features of folder.

  Question:
  * Why is this happening? It seems to be a problem in Explorer, not in the delete code actually (since the problem does not occur with one hand)

  I don't know the underlying cause or how to fix it. However, something like Unlocker would work.
  http://ccollomb.free.fr/Unlocker/

  Tom

• ACS 5.6: Problem with deleting a file via cli

  Hello world

  I am trying to automate the removal of 5.6 ACS network devices.

  I have delete.csv file with the list of devices I want to delete:

  name:String(64):RequiredTest0Test1

  When I connect to ACS CLI and run the command to remove the import file I get this result:

  .../acsadmin(config-acs)# import-data add device tftp delete.csv delete_res.txt abort-on-error noneCannot start import.Header is incorrect. Download Import Template for required header record.

  But when I run the web management import file, everything goes well:

  -------- Summary --------Total Number of Records Processed 2Number of Records Failed 0Number of Records processed successfully 2

  So please, this is where someone who knows what I did wrong? Thank you

  To remove devices, try the following command:

  import data delete device tftp delete.csv delete - res .txt abort error no

  In addition, make sure that the file is plain text only. If you're still having problems, check the following debugging:

  mgmt-log debug level debugging

  Then repeat the process, download a support package and to look at the logs for clues.

• I have recently installed Windows 10 free update.  Now I am unable to delete .pdf files and get the invalid error message "Function MS-DOS."  It has never been a problem with the previous Windows 8.1.  I contacted Microsoft technical support and I was tol

  I have recently installed Windows 10 free update.  Now I am unable to delete .pdf files and get the invalid error message "Function MS-DOS."  It has never been a problem with the previous Windows 8.1.  I contacted Microsoft technical support and they told me there is a problem with the .pdf application and I need to contact Adobe Acrobat. This can be corrected?

  uninstall any version of acrobat is installed.

  clean by Download Adobe Reader and Acrobat tool - Adobe Labs

  Restart your computer.

  delete all to delete pdf files.

  If this fails, it is a problem of ms.  If this attempt is successful, then reinstall your acrobat.

• Weird problem how to delete a file in the cloud

  Hello

  I am now a proud member of the Adobe Creative cloud.

  Once connected, everything seems normal and I can upload a file just by dragging and droppping.

  Now the problem: I am not able to DELETE a file. As in the video Adobe online there is no icon to the trash.

  If I select a file, the only actions on the left marker are available:

  -Publicly stream (behance)

  -Send the link

  -Move

  -Rename

  -The archives.

  If I use the main blue button (Actions), the only actions that I see are:

  -Create a folder

  -Upload

  -Search

  Please respond to this problem, greetings.

  If you want I'm happy to send a screenshot.

  He need to "check in" and then go into your archive to select for permanent deletion.

  Mylenium

• Impossible to delete legacy files, character there is NO guilty?

  I was browsing some legacy files in my archive DVD containing old projects of the time 7 OS and now I am unable to remove my trash of 2 of them. There are two pesky files that contains a "NULL" character at the beginning of their file name. I can't move or rename, so the folder hierarchy that contains rest too.

  

  I can't rename the files. When I move or empty the trash, this error message is displayed:

  

  I have tried everything I can think, renamed, all UNIX commands in the terminal I could google to the top. Moving them in a temporary account and then delete the account does not work. After you remove the user remainder file, containing only rogue files and folders.

  Help, please! What can I do to get rid of these pesky files?

  Hello

  This is a known issue with OS X 10.11, that has never been set.

  FC.

  Cannot delete/rename/move a file of Windows with a special character

  https://discussions.Apple.com/thread/7409456

  Workarounds include:

  (a) start the machine problem in OS X 10.10 or an earlier version and delete the file from there. or

  (b) connect the machine problem started in disc Mode target of another machine booted to OS X 10.10 or an earlier version and delete the file from there. or

  (c) to initialize the volume where the file problem.

  This seems to be a serious regression within XNU. I wonder if it is fixed in OS X 10,12 or not.

  Good luck

  H

• Update to os 10.10 will delete my files or programs?

  Update to os 10.10 will delete my files or programs?

  No, unless a problem occurs. Back up first.

  (142313)

• What is the file deleted the files in the main folder, and can / should I remove it?

  What is the file deleted the files in the main folder, and can / should I remove it? Is it too much room, I could use?

  This file stores a list of files from previous version of Firefox that are no longer needed or supported in the current version of Firefox. This file is only a few KB and it is best not to delete files in the Firefox program folder to avoid update problems. If the required files are missing or modified with a update Firefox will download the full version (approximately 10 MB) instead of a small incremental update which is usually only a few hundred KB.

• Add, change and delete the file "iTunes" on a NAS

  I have just said "Apple Support Community" by Apple Support.

  The title probably sums up what I'm trying to do. I'm looking for a way to add, change, and delete files on a NAS.

  Hardware: MacBook Pro 15, 1 TB of storage, 16 GB memory, OSX El Capitan.

  NAS: Qnap TS - 453 has: storage nominally 16 TB, up to about 5 TB.  4 WD 4TB disks in a RAID 5 configuration.

  a Vaio WIN10 as well as a smaller MacBook (my wife)

  The purpose of the NAS is to provide a backup system for computers and act a server "iTunes."

  I acquired the NAS after the death of my WD MyBook live in December 2015 after five years of reading backup and "iTunes" to my computer and the Sonos system.

  After two months of 'getting to know you' with the NAS, I finally managed to configure the server "iTunes" and Mirabile Indo-European it works!  I'm just doing the SIN to a back-up for computers.

  Now for the question: I am looking for an app (for lack of a better term) that will allow me to add and remove files to and from the NAS "iTunes" folder

  My search for a solution so far has indicated that:

  (1) NAS' iTunes folder is not really true Apple iTunes and

  (2) I need something that is DAAP (Digital Audio Access Protocol) friendly, that would allow me to add, change and delete the files.that would allow me to add, edit and delete files.

  I'm not looking for something that would synchronize the files iTunes NAS to one of my computers, I am all prepared to do myself if necessary.

  If I can't find an application so I use the app 'Brute Force' change my Mac iTunes required records and download again to my NAS.

  Why do you need an app to put the files in a folder on the NAS Server?  Make them just above in the Finder.  Maybe I'm missing just your problematic here.  Do you mean add your PEMA files to iTunes? I've never used this file format, but kind of, I would be very surprised if iTunes supported it.

  the NAS iTunes folder is not really true Apple iTunes

  I don't understand what you're trying to say here.  "Apple iTunes" is an application. Yes, a folder is not an application.

  Be warned, we see not few messages from people that use iTunes with a NAS. Often the problems cannot be explained. sometimes just iTunes and NAS disagree togther.

• How can I delete a file in use by demon updater?

  How can I delete a file that says it's in use by Daemon updater.exe?

  I have a computer with a hard drive of GB 914, who recently said that it is impossible to install a program because the disk is full. While they inspected, I found that it only reported about 200 GB of usage and after you remove files non-essential, I released 57 GB of disk space.

  I made sure to show all files and installed a file tree Locator and found a log of 684 GB file but when I tried to remove it, it said that the file was not in the specified location. Then I manually found the file in system32 tree and he said that it is impossible to delete the file because it is used by daemonupdater.exe.

  can anyone help please?

  Credonem, welcome to the forum.

  I suggest start safe mode to see if that helps with your problem.  Safe mode starts only the drivers and programs needed.

  Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.

• Delete specific files of a project without deleting

  A common operation in the lab I work in is:

  Take a basic VI and change it to specific experimental purposes. The way we have done in the past is using the "save under...". "and selecting: 'Open additional copy' (and adding this file to the unique project that we use for all our work of LabView; probably a silly thing to do from the outset, only seen one project). However, we recently encountered a few problems with this (surprise, surprise) because a user has modified a Subvi, which was referenced by several rappclc. So, we decided instead start using individual projects and duplicate any relevant hierarchy to avoid changing the common files.

  The first time that we tried to do this, we used "save under...". "and"Double hierarchy,"then save the new files on a new project. However, the duplicate files were added somehow the original project as well. The result is that there are several conflicts that whenever files are responsible for each project. The obvious way to solve this problem is to delete the overlapping of the original project, but I can find no way of simply remove them without deleting the files! This is a serious nuisance. Any ideas anyone?

  RF-

  Thanks for the reply. I guess that's the way of the brute force to go, I was wondering if there was a more generally including remove the individual references, or several files. Thanks also for pointing out the mess of the icon.

  -jph

• Can not build an installer, because it seems to have deleted the files required

  LabVIEW does not locate the Installer source of a component necessary to build this installer. LabVIEW finally found the missing element in the following distribution:

  The distribution name: NOR-DAQmx 8.6, disc 1
  Last known installation path: C:\National Instruments Downloads\NI-DAQmx\8.6\NIDAQ860-1

  Search source for NOR-DAQmx 8.6, disc 1 Setup and build your installer again.

  Visit ni.com/ask support request page to learn more about the resolution of this problem. Use the following as a reference:

  CDK_Build_Invoke.VI.ProxyCaller > CDK_Build_Invoke.vi > CDK_Engine_Main.vi > CDK_Engine_Build.vi > CDK_Engine_PromptForMissingDist.vi

  Loading information of product deployment
  Loading information of product deployment
  Adding files to install
  Makes adding files
  Preparing to build the deployment
  Copy of the products of distributions
  Copy distribution "OR-DAQmx 8.6, disc 2" of: C:\National Instruments Downloads\NI-DAQmx\8.6\NIDAQ860-2\ to: C:\LabVIEW\DAQ\Pentium4_Loggers\builds\Installers\Data worm 23a\ P4 Logger ".
  Deployment of the completed building

  I think I must have deleted the files required from my C drive.

  (Updated)

  This is now fixed.

  I managed to resolve this, by a combination of download OR-DAQmx 8.6.1 from the Web site of NOR and NOR-DAQmx 8.8 disc installation.

  

• Impossible to delete mutiple audio codecs installed in windows server 2003

  Hello

  I'm having this problem ~ impossible to delete mutiple audio codecs installed in windows server 2003. When we duplicate the record of voice on windows xp, the sounds and ignored the reading. But playback under windows vista and windows 7 has been authorized. Can someone help... THX in advance

  azma_yusoff,
  Because your question Server 2003, you need to post in ourTechNet forums. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I want to delete downloaded files 3gpp but massage appears cannot remove access is denied. Make sure that the disk is not full or write protected.

  the files were downloaded

  Hi Azhar_339,

  1. when the files are located on your computer?

  2. do you get this error for all 3gpp files?

  3. have you made changes on your computer before this problem?

  You can follow this link & check if the problem persists:

  Error message when you try to delete a file in Windows XP: "access denied".

  Hope the helps of information.