Delete the user interface of windows defender on my computer laptop windows 7

Similar Questions

• Speech recognition does not match the language of the User Interface in Windows 8.1

  How can I update my speech reconition language that matches my user interface language? Thank you

  Hello

  Thanks for posting your question on the Microsoft Community.

  I apologize for the inconvenience caused to you.

  I understand that the problem with speech recognition does not correspond with the user interface in Windows 8.1

  This issue would have occurred due to some damaged system registry entries.

  Please provide me with the following information to better understand the issue.

  1. What language is speech recognition uses in the system?

  2. What is the base language that is installed in the system?

  Note: Speech recognition is available in the following languages: English (United States & United Kingdom), French, German, Japanese, Mandarin (Chinese simplified and Chinese traditional) and Spanish.

  You can also check out the link below.

  How to use speech recognition

  http://Windows.Microsoft.com/en-us/Windows-8/using-speech-recognition

  Please provide the information above to help you best.

  Thank you.

• How can I permamnetly delete the user account in Windows xp?

  How can I permamnetly delete the user account in Windows xp?

  1. 1

     Go to the control panel. There are several ways to do this, but the most common is to go to the Windows Start menu and click on "Control Panel" on the right side. Follow whatever it is more convenient for you.

     
  2. 2

     Click on "user accounts" in the window that appears. Or, you see the standard view (with lines of icons) or the display of the categories (which is explicit). Both have a shortcut to the user accounts Control Panel.

     
  3. 3

     If a control panel is not yet made, click the 'user accounts' Panel at the bottom of the window. If so, you can skip this step.

     
  4. 4

     Click the link you want to get rid of any user account.

     
  5. 5

     The next window will have a list of actions you can do for the user account, one of which will be "remove account". It is the action that you'll want to click on.

     
  6. 6

     The last window that you will see will ask you if you want to keep the soon-to-be-used user represents the files in a folder on your desktop. It's your choice here.

     
     • If you have already backed up all important data on this user account, you can safely click on 'delete files '.
     • If you do not, you must click "keep files".
  7. Kind regards
  Amith Malherbe

• How can I permamnetly delete the user account in Windows 7?

  Former title: users - delete old

  How to remove a permanently in windows 7, users of the system

  Hello
   
   
  The steps that you must follow depends on whether your computer is on a domain or a workgroup.
  See the article below to delete the user account in Windows 7.
  Delete a user account
  http://Windows.Microsoft.com/en-us/Windows7/delete-a-user-account
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to get back the programs that I have this marking of the beginning of the user interface modern Windows 8?

  I accidentally this marking of some programs at the beginning of the modern user interface. Though even they do not show on the start menu, windows store updates offers up-to-date on them without worrying. Can someone tell me how I can back these applications?

  Thank you. :)

  This is how...

  1. Right-click on the Start Menu
  2. Select "All Apps"
  3. Scroll to find the "missing" app
  4. Right click on it
  5. Select "Pin Code on startup"

• Delete the user account associated with a persistent desktop computer

  Hello

  I just got my first pool persistent up and running and successfully delivered a desktop computer to a thin client using the VDM on XP - E connection software. Initially, I tried using the administrator account. Now I have to work, I would like to remove the administrator account on this computer virtual association. I tried using vdmadmin.exe but I had a bad argument error...

  C:\Program VMware View\Server\bin & gt; vdmadmin.exe-L m CMA-LAB1 of CMA-LAB - r cma-vm\Administrator

  Invalid parameter: bad argument 'CMA - LAB ".

  Invalid syntax

  I got work KB 1007526 and I tried to change to adapt to what I was doing, of course not.

  Any point in the right direction would be appreciated.

  ... also, the command in the KB is to assign the user who needs - u. To remove it use - r. It does not take a username.

  For complete command-line syntax, see http://www.vmware.com/pdf/view40_command_line_tool.pdf

  Select this option.

• Changing the size of the user interface to windowed, like PS CS6

  I'm trying to get used to this agreement of full screen Illustrator has, when the document is distinct from the program illustrator himself, unlike Photoshop, where all contributions and easy to navigate. I understand the shortcut key F will change certain modes, but not what I'm looking for.

  I was wondering if it was possible to put in place while it was all contained and did not my monitor 27 "together. This is quite annoying, I have to multitask a lot bounce Sublime to the PS text to HAVE.

  So is there anyway to HAVE look like photoshops UI? As in everything is taken and not the size of my screen?

  It would be great.

  Thank you

  Jon

  you mean like the course of enforcement?

  in the menu bar, go to the frame of the window/application.

• How to reset the Status field and delete ToDo list outside the user interface?

  All, morning

  HR 802 generating WebHelp.

  I made use of the status field and ToDo List in the past. For my next release aid, I would like to reset these fields for all the subjects, so I can still have accurate reports as subjects of creation/revision of the final course.

  Is it possible to do without opening each topic in the user interface and compensation/change manual fields? (I thought to delete all fields of ToDo and recreate them, but thought that there is an easier way.) This information appears in each section or in a separate file?

  Thank you

  Patrick

  Hi Patrick

  1. Close all topics that can be opened in the editor.
  2. Open the pod of the list of topics.
  3. Select all subjects.
  4. Right-click and choose Properties from the subject.
  5. Click the status tab.
  6. Modify if needed.

  All subjects should change to reflect the new status and the task list settings.

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7 or 8 days - $24.95! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• Offset of the user interface after update of El Capitan

  Hello. Since I upgraded my Macbook Pro late 2013 to El Capitan retina, I've known GAL of the user in function, mainly opening animation of safari and switching between desktop computers. These issues are only to make my user base, I created a test user and concluded that the test user was not the offset of the user interface. I have reinstalled the operating system, as well as talked to apple. Apple had me reset the Pram so that delete files, including:

  / Library/LaunchAgents

  ~/Library/LibraryAgents

  / Library/LaunchDaemons

  / Library/Caches

  ~/Library/caches

  and many other files like these.

  None of that helped, my UI lag is still there and fine. Also, I'm not sure if this is relevant; However, my recovery HD (available from start by pressing the alt/option key) is not an option. I'm not sure if the files I deleted with apple support caused it or reinstalling the operating system has done this. IM thinking delete files because I reinstalled the operating system using the HD recovery.

  Does anyone know how to fix the lag in the UI? I know other people have this problem, google search and this forum but no clear answer has not developed.

  Thank you

  Caulin Bloom

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• command racadm iDRAC7 to delete the user indexed

  iDRAC7 command racadm to delete the user indexed?

  Background: R720 using the iDRAC7, 1.57.57 firmware

  Tried to find a way to remove a user account from the DRAC interface.  You can add a new user quite easily, but it doesn't seem to be an option to delete a user.

  I searched the web and found the following RACADM command several times, line entry but it doesn't seem to work with iDRAC7...

  Syntax: racadm config-g o -i ""

  but when I tried to use this command with the NULL entry [""], it is not accepted

  PS > racadm config-g cfgUserAdmin-o cfgUserAdminUserName-i 3 «»
  ERROR: Invalid syntax. An object value must be specified.

  This ability has been removed from iDRAC7?  Is it possible to remove a user from iDRAC7?

  Update:

  Tried suggestion of Daniel by reorganizing the parameters, but unfortunately I do not have the same results.

  PS > racadm config-g cfguseradmin-i 3 o cfguseradminusername «»
  ERROR: Invalid syntax. An object value must be specified.

  However, it occurred to me that I was issuing the command in PowerShell via Windows Server 2012 OS and that could be the problem.

  I re-tried the original syntax using a SSH connection instead, and that seemed to do the trick.

  /Admin1-> racadm config-g cfgUserAdmin-o cfgUserAdminUserName-i 3 «»
  Value of the object successfully changed

  It seems that MS PowerShell interprets the entry incorrectly – maybe he uses a different character set... Note: it works via PowerShell IF you put a value (ex: 123456), he's not only the possibility of NULL value.

  Can be a value of further investigation or at least a technical note.

• WIN8 registers touch but no reaction from the user interface?

  Anyone having problems with Win8 button when your fingers are clearly registered (Windows gives this feedback from the spherical ripple effect) but the user interface under your finger does nothing? No not the button and so on.

  I live it with some Chrome for example, with the small button tab when it is near the top edge of the screen.

  If I drag the window to the center of the screen, I have no problem with getting keys recorded. Hit the button new little tab gives no trouble.

  When user interface elements are close to the edge, no reaction, even if the wave indicator appears.

  Cannot know if it is a driver or a HW problem. I use X220T.

  Example screenshot

  May be a problem with Chrome, in fact. Tried with Firefox and the new tab button is a lot easier to hit. ---> will give Chrome devs a hint

  EDIT: what you know! The new beta version has already dealt with this issue:

  https://www.Google.com/chrome/browser/beta.html

• Slow response from the user interface with acquisition of data of type long time

  Hi all

  I have a question to ask more out of curiosity than necessity right now. I've built a program that acquires data from the accelerometer and the Treaty in a number of ways: filtering, FFT, FRFS, things like that, but the answer of the UI is still slow, because I need a resolution of frequency of 0.2 Hz for my data domain, which means that the sample acquisition time is 5s and all this awaits before execution.

  My question is this: is there a way to completely isolate the user interface of data acquisition so that it responds immediately?

  I tried a design model of producer consumer with queues, but found everything to be always waiting for samples to be taken. Maybe it was exactly as I did.

  Thank you

  Phil

  If you need to sample for 5 seconds in order to have enough data to analyze, so unless you can "predict the future" and "knowing" the five seconds of data, simply wait for the data that arrives.  Using parallel loops of producer-consumer will allow data acquisition to proceed (for the next 5 seconds of data) while you do the analysis, but you still have to wait for the data to be analyzed.

  Note that the previous paragraph assumes you are collecting data in 5 seconds 'chunks' and analyze each "chunk" (independent) on arrival.  You could also do something like having a "second 5 sliding window" which moves, say, a second at a time, giving your FFT a finer resolution of 'time' (at the expense of their independence).  This would be a (slight) change in your loop of producer (you want to taste in 1 second pieces, accumulate 5 these pieces) and the consumption loop (start analyzing, spewing a FFT every second, while replacing the older "chunk" with the most recent - a queue with loss can do for you).

  Bob Schor

• The User Interface browser missing

  Hello

  I'm sorry, but the coffee crisis seems to persist...

  While working on the interface graphical user Interface browser, located to the right of the user interface, disappeared. Because the GUI is larger than the window and I need to scroll horizontally to evaluate the right-hand side of it, I didn't know this fact immediately. Therefore, I don't know what it was, I did it to make the browser UI disappear. Navigation assistance, I found no hint of how to show/hide the browser, so I guess it should always be there...

  I checked: the user interface editor is limited. I also tried to release and re - lock all windows, without effect.

  Thank you

  Wolfgang

  good news: the browser of the user interface is still there, but almost as shy than me: he was pressed to the right border, see the illustration below. So with one hand, I could see he...

  

  Excuse me for interrupting.

• The user interface of logon C:\windwos\system32\msgina.dll DLL could not load or restart the original DLL. Restart

  I created a ghost of a 32-bit 2003 server image and tried to restore the image on the same server of model\type. I got an error message with the following.

  The user interface of logon C:\windwos\system32\msgina.dll DLL could not load or restart the original DLL. Turn it back on.

  Tried to fix the server with the operating system and can not find the disk driver. I found the driver load it on a floppy disk, f6 entry, insert the diskette. I have a message with the following text.

  Type EXIT to exit the consul of recovery and restart the computer.

  1 C:\Windows

  which windows installation would you like to log on

  (to cancel, press enter)?

  Hi MichelZelensky,

  The question you posted would be better suited in the Windows Server Forums. I would recommend posting your query in the TechNet Forums (Windows Server).

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  I hope this helps.

• Help! All files on disk of data lost after deleting a user account in Windows Vista

  Hello

  I delete a user account on Windows Vista. After the deleted account, I can't access any files stored on my data disc (not c :), how can I access these data again?

  The data are very important to me. Help, please

  ARO

  Alex Ho

  Hello

  Thanks for posting in the Microsoft Community.

  I appreciate that you try to recover the data after the deletion of the user account in Windows Vista.

  Since you've already deleted the user account, you would not be able to recover the data.

  However, you can use any third party to the data recovery software.

  NOTE: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

   

  Reference link:

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-in/Windows-Vista/fix-a-corrupted-user-profile