deleted documents, always on display in the folder

I had a problem with the deletion of documents in the folder my documents.

If something I save to the folder, and then delete it afterwards, it still shows upwards. so I delete it again and then it says that the file cannot be located.
So I close and open my documents again and it's gone.
It does only in the folder my documents.
Any suggestions?
Thank you

If you right-click the document and amine to delete in the pop-up, it should remove.

Try > start > search to see if the document is in several places.

Tags: Windows

Similar Questions

  • BlackBerry smartphones, I deleted an e-mail account but the folder still appears on my home screen

    I deleted an e-mail account, but the folder still appears on my home screen.  It doesn't let me delete it.  The e-mail account is no longer shows on the screen for managing Email accounts, so it should be deleted from my phone.  I tried to remove the battery, but it did not help.

    Looks like the maintenance book remained. See http://docs.blackberry.com/en/smartphone_users/deliverables/32608/Accept_or_delete_a_service_book_61... Remove the service books that corresponds to the e-mail account deleted.

  • starting yesterday windows mail doesn't send mail and deleted emails are not going in the folder to delete first

    deleted emails disappear just - I checked the settings and they are not configured to automatically remove. When I try to send an e-mail, as they go to the Outbox and windows mail will not send not and gives all the details in the window box, its just empty. When you return to the Outbox of the body of the e-mail message was gone.

    You can have an email stuck, even if you don't see it.

    How to remove an Undeletable Message stuck in Windows Mail
    http://www.Vistax64.com/tutorials/62560-Windows-Mail-problems.html

    WMUtil
    http://www.oehelp.com/WMUtil/default.aspx

    Bruce Hagen MS - MVP [Mail]

  • Always on display in the research of deleted messages (years ago and even), blank incoming emails and filters not auto running. * sigh *.

    Two problems here, maybe they are related. I went through and deleted to rebuild the database as other say to do and much more for a while. I'm puzzled.

    Now, I do receive a ton of emails and are struggling to go through all the and need to save a large group of them for my blog of the journal. However I also created subfolders (which btw filters I've implemented will not auto or filter)

    I made a blunder in terribly I suppose that set up e-mails or something, this is what I have going.

    First my biggest problem, emails see the list when they arrive (and it can be a whole bunch with the same date and time) which show the sender and date. When I go to open these emails, they are empty. I don't think that this shows the object, that I did not what happens today... If I log in e-mail that these emails have not the sender, subject, but all seem to have the same date and time and of course emails are empty.

    Annoying problem: my research through my emails will show old messages deleted and shippers with dates and summer topic. But of course, they are removed if no content. I would rather all of these old emails go goodbye altogether.

    3rd, my filters do not auto filter, I have to put this (new to me) option up badly. I'm not going in and manually filter.

    I'm sorry, I waited so long to write, and the problems have accumulated. I'm a newbie with all this, so please be gentle and detailed with me. I think generally these things read me solutions, but all the solutions I found were only for the first problem (above) and seems to help for a little while, then boom she is still with blank emails, which appear to be completely lost.

    Maybe you can guide me to maintain my emails (Imap) online on the server and only read, write, and delete Thunderbird? I am so lost and frustrated. Thank you.

    I'm sorry I let this get so out of hand here,
    Mariah

    That your description sounds a lot to Norton anti virus, but others do.

    Multiple copies of the same message are repeated almost always anti virus analyzes incoming messages. Disable analysis and the problem goes away then turn it on and it resumes.

    My guess is that your filter problems and research problems are also associated with this uniquitous and most ignored security tool that mess so far more than it should...

    Removal of the index
    I assume you mean the global-messages - db.sqlite. If you close Thunderbird and now delete. Research will be incomplete until it rebuilt and the time to do this will have a lot to do with how much mail is and how busy the computer is.

    Now, create an exclusion in your anti virus program for Thunderbird profile folders. My guess is it is scanning the files in your profile, every time that Thunderbird tries to open and turning usually things in a fierce struggle, including Thunderbird loses that he just does not wait if files are locked. He expects exclusive access to her files immediately, not in 10 minutes when anti virus did it's thing. So things are added to the index but not deleted. Mails do not move as the destination or source file is 'in service', etc..

  • certificate of Agent of 12 c always on display in the SGD

    The SGC security console always show the agent certificate, even if the agent has been removed from the console using emcli delete_target.

    Now I want to reinstall the agent, and I fear that who will use the old certificate of agent for ssl communications.

    Is there a way to delete the certificate of the officer of the SGC security console.

    Thank you

    Hello

    Apparently, there's still a few entries of agent in rest of DB

    I recommend you open a SR with Oracle Support with the following information

    + Download the screenshot of the SGC security console showing the former agent certificate

    + Output of the OMS_HOME/bin

    /emcli get_ca_info-details

    + Download the latest version of emdiag using Doc 1426973.1EMDIAG REPVFY Kit for control of cloud 12 c - download, installation/disable-install and upgrade

    + Once so please run following command

    $ repvfy check - level 9 - retail

    + Zip and download files from $EMDIAG_HOME/log

    Kind regards

    Rahul

  • The content of the document is not displayed on the screen.  Only a white and gray page.

    When I open a document, adobe, content does not show on the screen.  Only a white and gray page.  How can I fix?

    Hi 89r0z62cap,

    It sounds like this PDF was created from a scanned image, and you have the option 'display large Images '. Try this:

    1. Open the Preferences dialog box (Reader/Acrobat > Preferences on Mac OS;) File > Preferences on Windows).
    2. Click on the page and make sure that display large Images is selected under Page content and information.

    Who should do the trick, but let us know if it isn't.

    Best,

    Sara

  • Applications removed always on display in the system report

    There are a few applications that I installed, used for some time and then them, deleted using all the methods that I could find.  There is no trace of the any of these applications with the exception of entries about this Mac > report system > software > facilities.

    I'm on El Capitan 10.11.4, using a MacBook Pro.  It works perfectly, but the perfectionist in me just don't like these entries.  How can I remove them?

    If they do not show in the Applications, all is well. Facilities is a story of, well, facilities. If you have installed an application several times, or updated, it will also show several times. It is by design.

  • Two part question... Several fields of text through 1 scroll bar scroll. Deletion of commas is displayed in the list of tables.

    I've been scripting this profile flash card that pulls data from multiple XML files. The problem I have is when it comes down to pull this 1 set of information that accesses attributes of an array of XML specific nodes to display a comma after the first input element before each item.

    My code:

    -------------------------------------------------------------------------

    xmlData = new XML ();
    xmlData.ignoreWhite = true;
    xmlData.onLoad = loadXML;
    xmlData.load ("'... / xml profiles / test.xml");

    --------------------------------------------------------------------------

    function loadXML (load)
    {
    If (loaded)
    {
    xmlNode = this.firstChild;

    image = [];

    id_array = [];
    Total = xmlNode.childNodes.length;
    for (i = 0; i < total; i ++)
    {

    image [i] = "... / people/photos /" + xmlNode.childNodes [i] Sublst.ChildNodes(1).ChildNodes(0) [1].firstChild.nodeValue + ".jpg";

    id_array [i] = xmlNode.childNodes [i] Sublst.ChildNodes(1).ChildNodes(0) [10] Sublst.ChildNodes(1).ChildNodes(0);
    }
    firstImage ();
    }
    on the other
    {
    Content = "file not loaded! ';
    }

    -------------------------------------------------------------------------
    }

    firstImage () function
    {
    If (load == filesize)
    {
    Picture._alpha = 0;
    picture.loadMovie (image [0], 1);
    associate_array = id_array [0];
    populateLists (associate_array);
    picture_num ();
    }
    }

    ---------------------------------------------------------------------

    function populateLists (xml_array)
    {
    ID = [];
    associatelist = [];
    locationList = [];
    for (n = 0; n < xml_array.length; n ++)
    {
    var identnumber is xml_array [n] .attributes;.
    ID [n] = identnumber.occurence + "\n";
    associatelist [n] = identnumber.associate + "\n";
    locationList [n] is identnumber. Location + "\n";
    occurence_txt. Text = ID;
    associate_txt. Text = associatelist;
    location_txt. Text = locationlist;
    }
    }

    Code red is the data displayed by commas after the first item. I couldn't find a solution anywhere... but saw dicussion: nested tables, often with commas.

    example.jpg

    It's just a preliminary version of the layout that I used to pull up false data... to show the commas.

    If anyone knows how to remove the commas that would be great.

    Finally, I wonder if it is possible to control the 3 text fields with 1 scroll bar or I'd better learn how to create columns in 1 text field to view these lists.

    Thanks in advance!

    .. few days I need to learn AS3

    I have not the slightest idea of XML (I'm still at the stage of the embryo on that one half-a tutorial) BUT,.

    to connect without a comma, you can do something like that. My table was called aHiragana (Japanese letters)

    var sHiragana:String = aHiragana.join(""); Kill the comma
    Words.Text = sHiragana.toString (); work, note "s" not 'a' in front of Hiragana.

    no idea if this is compatible with XML.

  • Updates are always on display after the update successfully

    Updated for service pack 1 (KB929729) as of 07/05/09 and update for windows vista (KB937286) dated 6/30 both have been installed correctly but then reappeared on the new list of updats

    Hi liagray1,

    Thank you for using the Microsoft answers forum. Hope you do well apart from the problem of windows update.

    Here are some steps that may help you to install the updates successfully.
     
    Step 1: First remove the updates.
    To remove the updates, go to "Control Panel"-> "features/characteristics of the program. In the left pane, click on "view installed updates".
    -Put out two updates one by one, then uninstall them.
    -Restart the computer.
    -If you are not able to find the update at the stated location, tΘlΘcharger 'Windows install cleanup utility': http://support.microsoft.com/kb/290301. Install and run the tool. Remove the two updates of the list of all the programs installed on your computer. Quit the utility.
     
    Step 2:
    put the system in a clean boot State.
    To perform a clean boot.
    -Click 'Start'. Type "msconfig" in the search box of start.
    -Press enter and click "continue" when you are prompted to.
    -Check the box 'Selective startup'
    -Uncheck "Load Startup items".
    -Go to the services tab, click "hide all Microsoft services.
    -Now click on 'Disable All', ensuring that the "hide all Microsoft services" box is checked.
    -Click 'Ok' and then click 'restart'.
     
    Step 3:
    run the following commands in an elevated command prompt.
    To do this, click "Start" and type "cmd" in the box "Search". In the results area, right-click "cmd.exe" and then click "run as administrator". You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on "continue". Then, click on "continue". At the command prompt, type the following commands one by one and press ENTER after each command.
    -net stop wuauserv
    -net of stop bits
    -net stop cryptsvc
    -ren %windir%\SoftwareDistribution SoftwareDistribution.old
    -ren %Windir%\System32\catroot2 catroot2.old
    -net start wuauserv
    -net start bits
    -net start cryptsvc
    Exit command prompt and restart the computer.
    -Now, open the windows update console and search for available updates. Install the updates that are important and critical.
    -Follow the step 2 again and put the computer in 'Normal startup'
    -Restart the computer.
     
    Reply back and let us know if this helps.
     
    Kind regards
     
    Mauricette
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Why my saved documents appear in a library, as well as in the folder I created specifically for this document?

    In all series of Windows 2000 and Vista I could make a folder, click and drag a document I had saved in my documents, in this specific case.  In Windows 7, you have the libraries.  In the library named My Documents, I save a document and then make a folder to place this document in.  When I drag the document saved in the folder, it's now in both places.  I want the document to be only in the folder and not in My Documents.  It makes it more confusing and harder to find what I saved.  I'm very organized and when I find something I want in one place only.  I tried following the steps of your help in Windows 7 and what I had lost, and it took me hours to find and retrieve.  I do a lot of genealogy and save these images like the pages of the book, death certificates, Census pages, etc.  I have folders for each of the categories I have to put my data found in.

    I want just the data that I saved in the library named My Documents in one place, a specific folder, I created.  Not displayed in the library, as well as in the record, that's two places the same item of data is then saved.  Where all my files appear in the library named My Documents and I can open the file and find my data easily. If I delete the data in one place it automatically deletes it where ever else the same data is stored. This double economy takes up space on my drive hard but, making it harder to find what I saved.  It's very frustrating.  What happened to just drag file and data automatically moves to the location that you specify and remote where you drugs.  I don't like this feature in Windows 7.  It is too complicated and causes a lot of confusion.  I'm not a computer teckie and dislikes change my system.   How can I fix it?

    It's what you did in Windows 7, and what I end up with.

    Library

    My Documents (why do two places named My Documents?)

    My Documets (my first data here) (what drugs and has dropped to a specific folder, it should go away from here and only appear in the folder)

    The folder I created. (data from drug and dropped in the file, the copy of the saved data stays in My Documents, the two places, why?)

    No duplicates are created, you are simply watching the same file from two different angles.  I know this response is long, but it will explain...

    The libraries are not different records or specific sites.  They are in fact just combined views.  Put literally, they work like this: when you open your document library, it performs a search of two locations: your documentsand records of public documents , then you show every file or folder, it finds in these locations.  The point is to give you a point of view combined all documents which you interest, wherever they are.  If you have documents on a network drive or an external hard drive, you could say the library to get those Word files and include them in the combined view.

    When you save something in a library, the library puts it right in the default location (in this case, the default value would be something like C:\Users\John\Documents) and it starts to appear in the result of the research of the library.  If you delete something, you remove the original: we never two copies, or whatever it is, the library is just there to combine several locations to make it easier to see everything at once.
    You think that you have no use for it - and you could very well be right.  If this is the case, just use it normally and don't bother not including additional folders in the library.  That is to say, just pretend that your document library is your Documents folder.
    I, on the other hand, use it like this: I have a lot of movies, TV series, video clips and other video content.  So he took several hard drives.  I said to my video library to show all these places so that I can browse all my movies from a library, rather than to try to remember which drive a particular show was performed.
  • Document pages in word on the iTunes format are duplicated.  How can I delet extra copies?

    I synchronize with all my Pages documents in Word format.  The problem is that every document on my iPhone is presented as reproduce under the iTunes, section of Pages of Documents, same old deleted documents.  Tried to remove the extra copies directly from iTunes, but could not.  Is there a way to remove these additional documents on iTune and couldn't get back in my phone?  Only when I use to synchronize using PDF format where duplication is not created.  But I prefer to have the documents in Word on my PC.

    Hi Gezirazlk,

    If you create Pages documents on your iPhone and want a PDF on your PC unless it is duplicated on your iPhone, a possible flow of work/solution would be to download iCloud for Windows on your PC and use iCloud drive to store your PDFs for your PC.

    Take a look at the resources below to see how it works:

    Implement the iCloud drive on all your devices

    Take care

  • Change the Document displayed in the viewer of taskflow documents programmatically

    I was wondering if anyone has an example of java to alter a document read in the document viewer task flow mainly by changing the resource ID parameter to refer to a different EL programmatically. The use case is:

    1. research of user data using a form of AF query parameter bound to an AF:Table
    2 each row of the table contains an ID to a UCM of the document content that matches other data displayed in the line
    3. when a row is selected in the table I want to be able to edit the document that is displayed in the workflow Document Viewer to that related to the content of the currently selected row id.

    I am able to get a handle to the view Document Taskflow on the page of the layer of links to help

    BindingContext bindingContext = BindingContext.getCurrent ();
    DCBindingContainer dcbind = (DCBindingContainer) bindingContext.getCurrentBindingsEntry ();
    DCBindingContainer docviewer = (DCBindingContainer) dcbind.findExecutableBinding ("doclibdocumentviewer1");

    However most of the methods that look, they would have a potential to create a new EL in the ID parameter resource like setParameterExpression (< String >, < String >) are all listed "reserved for the internal frame.

    In the pageDef, you would see the Refresh property - try setting it.

    Sample:


    taskFlowId="/WEB-INF/EmployeesTF.xml#EmployeesTF".
    Activation = "deferred."
    R = "ifNeeded.
    xmlns = "http://xmlns.oracle.com/adf/controller/binding" / >

    For more information on the use case, please take a look at
    http://docs.Oracle.com/CD/E21764_01/Web.1111/b31974/taskflows_regions.htm#CHDEIFBB

    Thank you
    Nini

  • change the folder view to alphabetical to chronological windows Explorer

    I want to change this chronological order of watching one of the subfolders in alphabetical.

    Exp: Under my pictures folder, I have subfolders by year (i.e. 2006, 2007, 2008, etc.) who orgaize in chronological order but the subfolders of those subfolders are the months of the year and they are the list alphabetically - even if I spent a year at the front or at the end of the name of the month (so it still lists like this (: October 2006, September 2006)

    I want to know if there is a way to get the subfolders to list as a calendar discovering putting an order number or letter before the month month.

    Thank you

    MOM of Godzilla

    You want cannot be done because it recognizes the names like alpha-numeric characters and sorts alphabetically (just as it does for years - but this market because they are numbers).  Try to use a designation number instead of the alphabetical name of the month - 8-2006 to August 2006 and so on.

    If it is possible (and I don't), the answer is maybe in one of these articles (especially the sort order on one) - but probably you'll learn from them that's not possible because you have things to put in place:

    Here's how to change the default template for a folder: http://www.vistax64.com/tutorials/70819-windows-explorer-folder-view-settings.html.  Default behavior is to select the model based on the first type of file placed in the folder (you must choose something).  Vista sets the folder type template according to what are the types of files in the window and the settings display window Explorer. This will show how to reset the display settings for the Windows File Explorer, disable Automatic folder Type Discovery (which is I think what you want)and increase the folder display the cache to make Vista do not forget the display settings, the folder type template, the size or the position of a specific window for when it was still closed to the location of specific path.

    It does not work with the Sub record under, Open with, open in a new tab (Internet Explorer), etc... dialog windows of type through the good File menu bar item. These don't seem to be able to have their size or their position to recall. For the latter, you can use the free program http://autosizer.en.softonic.com/ to resize them.

    Here is another article on how to modify the columns in Windows Explorer and sort in Vista: http://www.vistax64.com/tutorials/108665-column-customize.html.  This will show you how Add, Remove, move, change the widthand change the sort order of the columns in Windows Explorer in the way that you want.

    Here is another article on how to change the display of the default folders in Vista (but she argues, it is not a perfect solution and can revert to the previous behavior is not as good as the two prior links provided: http://news.cnet.com/8301-13880_3-10019957-68.html.)

    Sorry it wasn't the answer you wanted to hear.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Keep details of the folder is changed in default for any file type.

    I would like to have the details for the defined folder to 'Name', 'Update', 'Type' and 'size '.
    But every time I save a file in this folder, the details in this case happen to the default value for the type of file, I just saved.
    Ex: I save an mp3 in a folder and the details get passed to 'Name', 'Artists', 'Album', ' # ', 'Gender' and 'Notation '.
    Or, if I save an image, the details mode 'Name', 'Date', "Tags", "Size" and "rating".

    It's really annoying. I want the details of the case to stay on what I put them.

    Here's how to change the default template for a folder: http://www.vistax64.com/tutorials/70819-windows-explorer-folder-view-settings.html.  Default behavior is to select the model based on the first type of file placed in the folder (you must choose something).  Vista sets the folder type template according to what are the types of files in the window and the settings display window Explorer. This will show how to reset the display settings for the Windows File Explorer, disable Automatic folder Type Discovery (which is I think what you want)and increase the folder display the cache to make Vista do not forget the display settings, the folder type template, the size or the position of a specific window for when it was still closed to the location of specific path.

    It does not work with the Sub record under, Open with, open in a new tab (Internet Explorer), etc... dialog windows of type through the good File menu bar item. These don't seem to be able to have their size or their position to recall. For the latter, you can use the free program AutoSizer to resize them.

    Here is another article on how to modify the columns in Windows Explorer and sort in Vista: http://www.vistax64.com/tutorials/108665-column-customize.html.  This will show you how Add, Remove, move, change the widthand change the sort order of the columns in Windows Explorer in the way that you want.

    Here is another article on how to change the display of the default folders in Vista (but she argues, it is not a perfect solution and can revert to the previous behavior is not as good as the two prior links provided: http://news.cnet.com/8301-13880_3-10019957-68.html.)

    I hope this helps in your situation.

    Good luck!

    Lorien - a - MCSE/MCSA/network + / A +.

  • How to customize the order of music files in the folder (no not with artist, album, #, genre or classification tabs)

    I'm trying to transfer a playlist from Itunes on a folder, but I can't understand how to keep the order of the songs as I had them in the Itunes playlist.  I can't get files .mp3 alphabetically for the artist, album or genre.  Or according to numerical order by track number # or rating.  Any help in this regard would be highly appreciated.

    Here's how to change the default template for a folder: http://www.vistax64.com/tutorials/70819-windows-explorer-folder-view-settings.html.  Default behavior is to select the model based on the first type of file placed in the folder (you must choose something).  Vista sets the folder type template according to what are the types of files in the window and the settings display window Explorer. This will show how to reset the display settings for the Windows File Explorer, disable Automatic folder Type Discovery (which is I think what you want)and increase the folder display the cache to make Vista do not forget the display settings, the folder type template, the size or the position of a specific window for when it was still closed to the location of specific path.

    It does not work with the Sub record under, Open with, open in a new tab (Internet Explorer), etc... dialog windows of type through the good File menu bar item. These don't seem to be able to have their size or their position to recall. For the latter, you can use the free program http://autosizer.en.softonic.com/ to resize them.

    Here is another article on how to modify the columns in Windows Explorer and sort in Vista: http://www.vistax64.com/tutorials/108665-column-customize.html.  This will show you how Add, Remove, move, change the widthand change the sort order of the columns in Windows Explorer in the way that you want.

    Here is another article on how to change the display of the default folders in Vista (but she argues, it is not a perfect solution and can revert to the previous behavior is not as good as the two prior links provided: http://news.cnet.com/8301-13880_3-10019957-68.html.)

    I hope this helps with your situation - it may take more than one item to come up with the solution - but I would start with paragraph 3.

    Good luck!

    Lorien - MCSA/MCSE/network + / A +.

Maybe you are looking for