Deletion of list for the AutoPlay feature

When I go into control panel > Autoplay I see a long list of features I had formerly connected to my computer. Many of them are obsolete and are not used more and there is no way I know to remove. Does not work still uninstall orphaned devmgr device drivers. All I get is a missing icon beside the name of the device in the list of "devices" under autoplay. http://img191.imageshack.us/img191/5281/AutoPlay.jpg
The solution mentioned above using cleanhandler or by searching for the key below

HKEY_LOCAL_MACHINE
\CurrentVersion\Explorer\AutoplayHandlers\Handlers\

has nothing to do with what I need. Im not interested to change or limit the options for devices listed, I want to REMOVE the real davices to the total list. The entries located under these keys are cryptic and incomprehensible. Its impossible to know what device they are responsible. Please someone help me because I am willing to go through a complete reformat if I have to get rid of it. If someone can't find a solution, you could tell me how to prevent the list of devices non-volume autoplay?

Your help is greatly apprecited.

Hello

Make Restore Points so that you can go back and you can right-click on a registry key on the left
Component - EXPORT to back it up.

How to create a Vista System Restore Point
http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
If you check in this key, there will be WpdDevicexxxxxxxx or others under him in the left pane - and
If you click on each one in the right pane you will see the label that shows you which device
This control key.

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\AutoplayHandlers\KnownDevices

For each, you want to remove a right click on the key in the left pane that corresponds to the right
Label and export it - appoint each for the device for which it is labeled. Then, right click - DELETE.

I hope this helps.
Rob - bicycle - Mark Twain said it is good.

Tags: Windows

Similar Questions

  • Where can you confirm the OS that the AutoPlay feature is updated?

    Where can you confirm the OS that the AutoPlay feature is updated?

    If you are looking for the automatic run settings when a cd or usb inserted,.
    go to control Panel\All Control Panel Items\AutoPlay
    You can check here...

    Thank you!!

  • The AutoPlay feature update

    My computer says that it is ready to install an update to the AutoPlay feature.  Read the description, it sounds like he kick back to the 1990s, recognizing only the optical discs.  The description even shows you several things that he will force you to do it manually.  What is the purpose of this "upgrade"?  It almost seems like when they 'upgraded' my system by removing the private folder function.

    My computer says that it is ready to install an update to the AutoPlay feature.  Read the description, it sounds like he kick back to the 1990s, recognizing only the optical discs.  The description even shows you several things that he will force you to do it manually.  What is the purpose of this "upgrade"?  It almost seems like when they 'upgraded' my system by removing the private folder function.

    Hey Postalgeist

    you will need to provide details of the update to the correct people to receive aid

    repost in the windows update forum and inform them that their

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    Walter, the time zone traveller

  • PricingException: No price could be found in the price list for the varied SKU

    Hello

    We encounter an error message indicating that "no price could be found in the price list" when you try to add SKU varied to cart. Please find the errorlog for the same below: -.

    Error log: -.

    UnknownService-atg.commerce.pricing.PricingException: no price could be found in listPrices price list for the product prod310023 and ref sku330309
    UnknownServiceat atg.commerce.pricing.priceLists.ConfigurableItemPriceListCalculator.priceItem(ConfigurableItemPriceListCalculator.java:245)
    UnknownService

    at atg.commerce.pricing.priceLists.ItemPriceCalculator.priceEachItem(ItemPriceCalculator.java:579)

    But when I check the value of the Reference to the chapter of the price list has a price $10 by VAC.

    We have more riden method createConfigurableSubitems in PurchaseProcessHelper to address issues of Subsku varied and added the piece of code below to take the same: -.

    List < String > = skuProductDetails.keys ();

    While (enumeration.hasMoreElements ()) {}

    skuId = enumeration.nextElement ();

    productId = skuProductDetails.get (skuId);

    SubSkuCommerceItem subSkuCommerceItem = (SubSkuCommerceItem) getCommerceItemManager()

    .createCommerceItem ("subSkuCommerceItem", skuId, productId, quantity);

    getCommerceItemManager () .addSubItemToConfigurableItem ((ConfigurableCommerceItem) commerceitem, subSkuCommerceItem);

    }

    Do we need to make changes of configuration for the configurable SKU price. Any help/advice about the same will be very useful.

    Thank you

    Tatai

    It was a problem of configuration data. ID SKU parent was not mentioned for the configurable items of SKU.

    Tatai-

  • How to create a list for the tabs 2nd level

    Dear Experts

    I created a view
    CREATE OR REPLACE FORCE VIEW  "MY_VW_TABS" ("APPID", "PTTARGET", "PTTABNAME", "PTTABLABEL", "TABNAME", "TABLABEL", "TABPAGE") AS
      select pt.APPLICATION_ID APPID,pt.TAB_TARGET PTTARGET,pt.TAB_NAME PTTABNAME,pt.TAB_LABEL PTTABLABEL,t.TAB_NAME TABNAME,t.TAB_LABEL TABLABEL,t.TAB_PAGE TABPAGE
    from APEX_APPLICATION_PARENT_TABS pt,APEX_APPLICATION_TABS t
    where t.tab_set = pt.TAB_NAME
    and pt.APPLICATION_ID=t.APPLICATION_ID
    order by pt.TAB_NAME,t.TAB_NAME
    I need to create a dynamic list based on this view of the * 2nd level tabs * (of my model of two-level tabs page), to be used in a region bordered on page 0. However, I found that the code in the list should be as follows:
    select level, labelValue label, 
           [targetValue]            target, 
           [is_current]             is_current_list_entry,
           [imageValue]             image, 
           [imageAttributeValue]    image_attribute,
           [imageAltValue]          image_alt_attribute,
           [attribute1]             attribute1,
           [attribute2]             attribute2,
           [attribute3]             attribute3,
           [attribute4]             attribute4,
           [attribute5]             attribute5,
           [attribute6]             attribute6,
           [attribute7]             attribute7,
           [attribute8]             attribute8,
           [attribute9]             attribute9,
           [attribute10]            attribute10
    from ...
    where ...
    order by ...
    Now, I have two questions:
    (1) how to use the view above to be used in the code of dynamic list?
    (2) is a good way to create a list for the tabs 2nd level?

    Best regards
    Mahmoud

    Mahmoud

    Are you sure that you view is correct?

    >

     where t.tab_set = pt.TAB_NAME
     
    

    Should be

    where t.tab_set = pt.current_for_tabset
    

    Nicolette

  • I deleted WIndows 8 for the score, but his name appears in the display to dual boot

    I used Windows XP and Windows 8 for some time. I felt that I should remove Windows 8.je went to disk management and has deleted this partition and created a new partition. I also installed a new Windows 7 in this new partition. But the problem is that when I turn on the PC, the dual-boot screen. But it also seems the name of Windows 8 with Windows 7 and earlier version of the window.
    I don't know why the name of Windows 8 is despite him being withdrawn.

    In addition to the information given by Liz above, Windows 8 is not listed in the boot.ini for Xp and Windows 7 does not use a boot.ini file. The best way to solve this problem is to start in Windows 7, then use EasyBCD to modify the boot options delete Windows 8.

  • How to reset the Status field and delete ToDo list outside the user interface?

    All, morning

    HR 802 generating WebHelp.

    I made use of the status field and ToDo List in the past. For my next release aid, I would like to reset these fields for all the subjects, so I can still have accurate reports as subjects of creation/revision of the final course.

    Is it possible to do without opening each topic in the user interface and compensation/change manual fields? (I thought to delete all fields of ToDo and recreate them, but thought that there is an easier way.) This information appears in each section or in a separate file?

    Thank you

    Patrick

    Hi Patrick

    1. Close all topics that can be opened in the editor.
    2. Open the pod of the list of topics.
    3. Select all subjects.
    4. Right-click and choose Properties from the subject.
    5. Click the status tab.
    6. Modify if needed.

    All subjects should change to reflect the new status and the task list settings.

    See you soon... Rick

    Useful and practical links

    Wish to RoboHelp form/Bug report form

    Begin to learn RoboHelp HTML 7 or 8 days - $24.95!

    Adobe Certified RoboHelp HTML Training

    SorcerStone blog

    RoboHelp EBooks

  • Notes for the drawing feature does not appear in my Mini iPad after update 9.3

    After update to 9.3 on Ipod Touch and iPad Mini (original) (generation 5), the Notes applet does not show the drawing tool in the toolbar. My age of devices is the reason for this limitation?

    Post edited by: jesternrb1

    Yes, it is, or the first generation iPad Mini: https://help.apple.com/ipad/9/#/iPada9fb7c64

    Note: The sketch feature is available with notes of upgrade on iPad Pro, iPad (4th generation and later) and mini iPad 2 and later versions. If you have the iPad Pro, you can sketch in pencil from Apple.

    or the fifth generation iPod Touch: https://help.apple.com/ipod-touch/9/#/iph1e1d28202

    Note: The drawing feature is available with upgrade on iPod touch notes (6th generation) and later versions.

    Support it

  • Several entries of IP addresses listed for the OD Master

    My Open Directory Server works well, but I have a question about the first table that appears in the section Open Directory of the server application. The name of the server and Type are correct, but the address field has 5 IP addresses listed, two of which I do not recognize and which is a duplicate:

    I have deliberately obscure potentially sensitive information, but the first entry is a valid and functional FQDN for the master of the OD. The IP addresses of the first and the last appearing on the right side are actually the same address (this is the address that resolves the FULL domain name, PTR record for the IP address resolves the FQDN name). I have no idea why it appears twice and I don't know if I should be concerned about it. Audit of intellectual property returns a green light:

    $ sudo changeip - checkhostname

    dirserv:success = 'success '.

    The second (172.16.32.1) address is the IP address of the interface of the virtual server that is used by the VPN server, where it is expected. The entries of third and fourth, however, are unknown to me and I don't know where they came from. These two addresses are on the private block 172.16.0.0/12, so that they are non-routable.

    Is there a way to update or remove these stray addresses of my OD server config? Should I worry about them? What about entries double for the real IP address?

    Small update: I just tried to restart the server, and the second instance of the 'main' intellectual property disappeared. I still have two 172,16 stray addresses listed, however.

  • Is KB971029 necessary? I like the AutoPlay feature like this.

    Windows Update never gave a reason for the update disable AutoPlay for everything except the CDs and DVDs. It seems that this update happen me more help. Is there a security problem? What is an optional download?

    Welcome & thank you for your comments.

  • Song of the lists for the slotRadio cards

    Are the song lists available for the slotRadio cards or do we buy and look through to know what we come to buy?

    In a Word?

    N °

  • Wish list for the usability of the App World

    I love the ease of use of the world app on my storm - however, the following settings would simply lift the bar and the functionality of the application:

    (1) a record of "New applications" - so I don't have to scroll through each category to see if there was something new added.

    (2) a record of "Wish list" - for I can hold the apps that I thought were interesting and recover later for purchase after their scope more on the web.

    (3) links to go directly to a Web site so I can get more information from the developer.

    (4) a tab "Recently read" or a folder - can - not be necessary IF a wish list were available.

    Are there opportunities that these settings are underway?   Would be really nice...

    A weekly summary of new applications email would be cool also with direct links to the world of the app.

    Earl

  • My wish list for the next version

    Hello

    I'm quite new to Muse. I am currently developing a trilingual site for my own business.

    Here's my first wish list, after a few days of use (some of my desires are already available, but I have not found how to get them)

    1. menu widgets: currently, there are 3 options to decide on the content of a menu: 'All pages', "Top-level Pages" and "manuals".

    It would be greate to get some new options like:

    • "All the pages under a certain page" (which corresponds to tree full under a certain page)
    • "The pages of top level under a certain page.
    • even better (but may be more difficult to achieve): all pages of the current subtree from the level 2 page (it will be great for multilingual sites: it would be very easy to develop these sites by using the following site map:)
      • to the next level: home, language1,..., N language
      • in respect of each top-level page: the tree of the page (the site) for the language
      • .. .and it would not need different masters for each language! = > very simple to develop, high level of consistency...

    2. menu widget (but in fact, this wish is for any King of multi-party widget):

    It would be very useful to be able to copy - paste all graphics & behaviours (including properties) property of an element to another: this is especially true for menus with submenus containing and manual content: currently, if for example I have a menu with 5 top level items and a submenu for each of these 5 elements, the setting I put for the first submenu are not automatically replicated on the submenus of the other elements of level superior and I need to perform the same job 5 times! This could (should) be preventable.

    3. Japanese / no Western fonts:

    I would be more than welcome to get fonts non-Western menu of fonts for text objects, even if the Muse language setting does not match those fonts.

    For example, I want to work with the English user interface, but I need to access Japanese fonts!

    I don't see any technical reason or no business reason for not allowing this!

    4. the Japanese WEB (safe) fonts:

    It would be more that welcome to be able to add some Japanese (non-Western) fonts, and same course systems setting the interface language user of Muse does not match Japanese (non-Western language)

    We currently have all work in an international world and the market. It is simply false to think that people who work with a certain language of the interface user only want to work with content in this language! Language of the INTERFACE of software and content language are two totally unrelated things!

    Well, that's all for today, but I may post more wish in the future.

    All comments welcome.

    Please do not hesitate to add your suggestion to our ideas section.

    Thank you

    Sanjit

  • Alias of encryption B2B does not appear in the list for the channel AS2.0. Get the error if I save after selecting the encryption "Alias certificate not specified in the channel to secure the grant.

    Hello

    I'm using AS2.0 protocols.

    I create a key file using the following command:

    keytool - genkey-alias selfassigned - keyalg RSA - keystore b2bkeystore.jks - keysize 2048 - validity 730

    I created this file key in the following location:

    / FMW/Oracle/middleware/user_projects/Domains/fmw_domain/config

    I am able to see aliases "selfassigned" for the signature and it works perfectly fine for me.

    But I'm not able to see any aliases in the list of encryption. If I did, I get error "Alias not specified in the channel to secure the issuance of certificates.

    I also created keystore using THE algorithm using the following command:

    keytool - genseckey-alias deskey - keyalg-keystore deskeystore.jks - keysize 56-validity 730 - shops KKCES

    but when I'm configurring this file key in B2B, it's say "INVALID FORMAT".

    I am not able to understand how I can get rid of him.    Any help will be appreciated.

    Thank you

    Nitil

    Hi Nitil,

    Have you followed this note?

    http://Anuj-Dwivedi.blogspot.co.nz/2011/04/implementing-message-security-in-Oracle.html

    Kind regards

    Robert

  • Work center buyer - group choice list for the application

    Hi guru,.

    Application of the R12.1.3 - purchase of Super user

    I'm looking for the customization of the page self service in the center of work IN. buyer for update of the application.
    I wanted to list/LOV Group by choice in the requisition page self-service request header to default to "Commandeer" rather "Default".
    I have not found this page self-service customization option. A body can help me in this how he requisitioned default.

    Thanks in advance...

    Published by: user8822881 on 24 Sep 2012 06:22

    Hello

    You must do by profile option settings.

    Configure the profile option "PO: requisition Grouping Default ' to 'Request' at the level of the site.

    You have two options - "Default" and "commandeer".

    Thank you

    PS.

Maybe you are looking for

  • How to backup / copy all photos to icloud on external hard drive?

    -J' I 20 000 photos stored in iCloud -I want to copy/save all THE photos of my external hard drive 2T & store in a separate file for custody. How can I accomplish this? Thank you Zerna.

  • Firefox not open correctly the web pages

    If you use firefox I'm unable to open web pages correctly, I use talktalk.co.uk as my home page, it has always worked before, now all I get is a string of words, this also applies to many other web pages. Yet on the Internet explore page opens correc

  • Imac IPhoto

    Why in my iphotos should I "4 568" in my photo section but in events I "6 091" should not be the same number in both sections. Im confused?

  • Printer HP Laserjet M601: HP M601 Fuser error 50.72.11

    How to clear fuser error 50.72.11?  I replaced the fuse and the rolders with a new maintenance kit and still receive the error message.  Please help.

  • No video when trying to play games online.

    I tried to play my need for speed carbon, as I have done hundreds of times before. It loads and I have sound but no video. In order to get out, I have to make a hard cock down. This happens with many of my other online games. Please help me?