Deletion of old user not recognized by the computer accounts

Similar Questions

• I found that if it becomes necessary to use time machine to return to an earlier existence to reinstall the iphoto library, if for some reason, you lose lose, then when you try to synchronize your ipad is not recognized by the computer.  As one

  I found that if it becomes necessary to use time machine to return to an earlier existence to reinstall the iphoto library, if for some reason, you lose lose, then when you try to synchronize your ipad is not recognized by the computer.  So when you try to synchronize the pictures, they are all removed from the ipad and trying to reinstall everything again.

  This may or may not work immediately.  In my case, only half the photos have been installed, and then the error message came that the rest of 9000 can be installed.

  I contacted Apple support team who has made various suggestions.  Subsequently clicking on a photo list in iTunes were all going again and pictures of 9000 then installed.  When I asked the support team what could happen I was told that it was a "glitch".  I don't like seeds they mean that there could be an error in coding somewhere.

  Here me again.  I use an iMac and iPad.  I don't know why XP and iPhone came.

• HP 6510 printer wireless not recognized by the computer

  Original title: HP 6510 wireless printer not recognized by the computer.  Works well before today.  Printer says ity online

  Our HP computer does not find the printer wireless above.  We made the updated IP address, which is correct, have restarted the router, the computer and the printer.  Convenience store is unable to detect a problem

  Hi Karen,.

  -What version of Windows is installed on the computer?

  -What antivirus/firewall software you have installed on the computer?

  The document from HP concerning "printer does not maintain the wireless connection.

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02817031#N80

  You have tried most the steps mentioned in the document, but please try once more.

  Additionally, make sure that you disable the antivirus and firewall programs just to make sure that these programs do not block the detected printer.

  Note: You must enable the /firewall antivirus as soon as you've done troubleshooting. If this is not the case, your computer will be vulnerable to viruses.

  Let us know if the steps of troubleshooting mentioned in the link will help.

• Pandigital PANSCN02 scanner that is not recognized by the computer

  I have a Pandigital PANSCN02 scanner that is not recognized by the computer.  Help.
  * original title - programs compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs *.

  Hello

  You can see the Microsoft Windows Compatibility Center, which says that the device has no information about the compatibility in windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&s=Pandigital%20scanner%20PANSCN02%20&type=hardware

  I suggest trying to launch the device in Windows Compatibility Mode and check if it works. See the link below:

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Hope this helps,

• Lumia 710 Nokia is not recognized by the computer

  Lumia 710 Nokia is not recognized by the computer

  Hi sagarxx,

  Have you installed the Zune software?  Take a look on this link down:

  http://www.Nokia.com/us-en/support/product/lumia710/downloads/

  Keep in mind the following:

  Software Zune will not work on versions of Windows prior to Windows XP SP3. Download Windows XP SP3.

  I hope this helps!

• IPod touch 4g not recognized by the computer.

  I have an ipod 4g and it is not recognized by my computer or itunes.  I called apple and used their forums and discovered that when I download itunes apple mobile driver usb is not installed.  Apple told me that it was a windows problem.  so I went to my brothers pc which has windows 7 like mine, downloaded itunes and my ipod could not always be recognized.  the mobile USB driver apple has not been installed on his computer no more.  I went to a friends house and he hooked up to his laptop which has windows 7 and it DOES not recognize my ipod.  After that, I knew for sure it was a windows problem.  can someone help me please?

  PS: when I download itunes, quicktime is not installed for some reason any.  Also my anti-virus could be a problem when I download itunes?

  Hi Karim,

  -Were there any changes made to the computer before the show?

  I suggest you go to the following Help article and check if it helps.

  
  

  iOS: device not recognized in iTunes for Windows

  http://support.Apple.com/kb/TS1538

  Note: The third-party products or services mentioned here are manufactured or provided by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

  You can also go through the following link and check if it helps.

  
  

  Problem installing iTunes or QuickTime for Windows

  http://support.Apple.com/kb/HT1926

  It will be useful.

• cd/DVD drives not recognized by the computer.

  Some full scans there is our operating system to xp does not recognize our 2 dvd/cd players after a full scan, by security essentials.

  We went into the control panel to check the cd/dvd drivers... and they were gone.  Then we went in the 'my computer' window, and neither one of them were there either.  It's like they were never there.  We can somehow reset something to collect, to use?

  Hello

  I see that the CD is missing on the computer.

  1. You did changes to the computer before the show?
  2. The computer is connected to a network?
  3. Is detected in Device Manager?

  Device Manager provides a graphical display of the hardware installed on the computer, as well as the device drivers and resources associated with this material. Using the Device Manager provides a central point to change the way the hardware is configured and interacts with the microprocessor of the computer.

  To access Device Manager, try the following steps:

  Click Start, click run, and then type devmgmt.msc.

  Note:

  Let us know the result.

  Now, you can read the following article and try the steps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Note:

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following articlehttp://support.microsoft.com/kb/322756

  If the problem persists, or you need help with Windows let us know.

• Lexar jumpdrive S50 or generic jumpdrive is not recognized in the computer.

  Original title: jumpdrive unrecognized

  have Windows Vista will not recognize Lexar jumpdrive S50 or generic jumpdrive. can anyone help? Thank you

  Hello

  The question may be generated if the currently loaded USB driver has become unstable or corrupt.

  I would really appreciate if you could answer the following questions:

  1. have you checked the issue by correspondence Lexar USB S50 key or generic USB stick on another USB port?

  2 are you able to use other USB devices on your computer?

  3. have you checked the camera do recognized in Device Manager?

  4. what exactly happens when you connect the device to your computer? You receive a code related error or message?

  Follow the steps below:

  Method 1:

  If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks for common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly by following the steps in the link below.

  Tips for solving problems of USB devices:
  http://Windows.Microsoft.com/en-in/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 2:

  
  You can also check in the Manager of device if the device is in the list.

  a. connect the device to the computer.
  b. to open Device Manager, type devmgmt.msc in the start search box and press enter.
  c. check if the device is listed.
  d. in the device, expand the device listed in the device list manager.
  e. If the device is listed, right-click on it, and then click Properties.
  (f) in general, under device status check the message. After back if there is no error message.

  For reference:

  Install a USB device:
  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-USB-device

  For more information:

  Contact Technical Support from Lexar:

  http://www.Lexar.com/support

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• pilot missing dvd/CD; drive even not recognized by the computer

  somehow, when I tried to burn a dvd, (windows DVD Creator) the computer seems to have removed its own driver for the dvd drive (I put the disc in, it recognized that it was not a disk supported, put a new one in the drive, and create dvd windows then told me that I need to install a dvd/cd writer to complete my project). the relase button disk would not work after turning in the second disc and always used to work even after that. If I use a pin code manually to open and put a disk in the light lights up recocnizing there is something in there, but that nothing, not even spin the disc. No cd, dvd or all other discs work. Ive tried a few different driver Fixer programs, even those you pay (mender driver, driver detective - no even to recognize the missing driver) and can't seem to find a solution. cd/DVD device does not even appear in "device system' list or lists of material which must show all devices, programs or drivers... also do not show my E: / in my computer, what would be my dvd/cd drive." I tried the "regedit" and could not find the 'filter filter up/down' you are supposed to remove to fix. " filter of upper/lower case is not listed in the options.

  I'm on a hp Pavilion dv6000 and ive tried searching on the site Web of hp and help all forums, with no solution until now...

  Hello

  For the CD/DVD problem start up that convenience store and work down to jump
  nothing. He is even said to continue if the CD/DVD drive is not displayed in Device Manager.
  You are much less likely to solve the problem by a hit or miss approach to try this
  or such. And of course, there may be a material cause.

  The HP forums, ask questions and I hope that those who have had
  the same issues on similar equipment that have solved the issue respond. Only way
  to succeed is to give your best effort.

  HP does not have a lot of online documentation and help diagnostics on their site and those
  could help to resolve some of the questions withour paying for support.

  Back up your data on the device and it goes back out of the box state
  can be one of the best moves to solve the present problems.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Hard drive not recognized on the computer after the upgrade to Vista

  I just upgraded to vista a my ext hdd does not come in computer how to install human and format the hard drive?

  What's your Vista-compatible external HARD drive? http://www.Microsoft.com/Windows/compatibility/Windows-Vista/

  Have you loaded the proper drivers, firmware or software for the external drive and your version of Vista?  He can't just plug-and-play, especially if this isn't original USB key but a convert.

  Once it is recognized by the system (if it is compatible and once the drivers are installed), go to start / Control Panel / administrative tools / computer management / management of records and right click on the external drive that shows there or format to change the drive letter or a similar task.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• CD not recognized by the computer.

  CD not seen

  A disk is never considered as being inserted. I changed the complete CD player but it did not help.

  Hello

  Try the procedure described in:

  When you insert a CD or a DVD, Windows Vista may not recognize the disc: http://support.microsoft.com/kb/939052

  Your CD or DVD drive is missing or is not recognized by Windows or other programs:http://support.microsoft.com/kb/314060

  Diana
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My Photosmart HP 7510 is not recognized by the computer for printing.

  It was working fine, until what we replaced our router with a v3 TG797n I have reset the printer and reinstalled the software on the compters several times but it still won't print. During the new printer 'Add' processes on the computer will not find the printer, even using the intellectual property. The printers IP is coming as 10.0.0.34, all printing test through the printer directly arrived as work, connected to the corect network.

  When I look at the routers settings it says that he recognizes the device with IP 10.0.0.34, but I have computers (an XP desktop running at the time) and a HP Pavillion Dv6 with Win7 cannot always find and say it should be disabled.

  I downloaded and tried all the HP diagnostic tools, and they all tell me that my printer is not activated on/not connected and offer no alternative.

  I've had the printer for less than 6 months and already he had replaced with a new one because it was defective, and now it gives me a headache.

  In addition, we have updated the Office of Win8 and cannot install printer on that. I checked the lists on this site as to what printers are/are not taken in charge and I didn't know that the HP Photosmart 7510 nowhere mentioned at all.

  And as usual, after trying everything (it has been two weeks now to try different things) and then post online for support, trying one more time and it works like magic again.

  I downloaded the HP printer, troubleshooting thing once again (the third time) run the wizard and found the printer (the second time), downloaded the drivers rather than using the disc (for the second time, the first time that the installation has failed just a t at the end) and intsead to add the IP address of the printer in step "COnnect network printer", I looked at the user name for the device on my router (HPDDxxxx), and which came to the place.

  ********************************************
  EDIT: 02/11/13

  Tried to print something today - once more the computer cannot connect to the printer. Printer is always connected. No parameters had changed since I got it to work.

  Why is this happening! I need to print things! Very close to giving up. However, I doubt that I will get a refund of HarveyNorman, because when they test it out it will connect, and that's enough for them not to say 'no refund '. Ugh.

• Maxtor OneTouch II 300 GB external hard drive USB/FireWire not recognized by the computer

  Title: Maxtor OneTouch II 300 GB USB/FireWire external hard drive of origin

  I found my old external hard drive and I wanted to access some old photos. Since I bought the drive, I have upgraded to Windows 7. Windows does not see the hard drive after updating the usb drivers. I look in the tab of the computer and no hard drive. I looked in disk management and I see it but it won't initialize. Shows the error, and that's all... HELP!!!!!!!!!!!!!!!!!

  Hello

  
  1. have you checked if the external drive is detected on another computer?
  2. What is the exact error message you get when the task fails?
   
  To work with the issue, check out the following link.
  
  My drive does not appear in Windows Explorer
  
  http://support.Microsoft.com/kb/330140
  
  Check if it helps.

• USB not recognized on the computer. Error code 43.

  Printer was working fine and then - after Microsoft updates have been installed - USB not recognized-Code 43

  Have you tried the new usb - port, nothing works

  Thank you

  We uninstalled the printer and then tried again the USB and it worked

• I have a problem with the password is not recognized on the computer.

  Original title: sign the windows 7
  • HP dV6 laptop model
  • Known password Windows is not recognized, that is when the laptop is started
    
  • No new programs have been downloaded
  • It's not windows Notepad 7 in question, I can't get in the windows 7 from do anything.
    
  • A program to "Find lost password", there are many, help because I am sure that the original password that worked until today has been typed correctly several times since the problem occurred?
  • I've never had a similar problem.
    
  Here you go:
  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point when your password has always worked.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.