Dell 15R and Phillips Hd TV reference

Similar Questions

• Reference Dell 15R SE 7520 my downloads Dell said "SERVICE TAG NOT SUPPORTED" need > > > Cyberlink PowerDVD - download Blueray

  I buy dells all the time... and I never had a problem with the addition of a new system for my dell downloads... I even managed to do it with the old system > talk about saving lives, buying used - to find have never used this program... But I have a new Dell Inspiron 15R SE 7520 with a Blueray player. For any types of bluerays play, you must have a program for the codec... My laptop came with Cyberlink PowerDVD, but a hard drive replaced, and I lost the program. My laptop is under warranty... I have the dell USB Pen... I have the Dell Windows 7 disc... I don't have the disc from dell or of the programs and drivers support... "someone said on another post, all on the PEN USB - but I can't understand the use of this on my PC - I tried to boot from it, and she gets all the way to locate road and stop? When I plug in windows 7 - I do not see any program CyberLink... But, for some reason, when I got my new drive, I couldn't figure out how to get the USB pen to work... so I had to use the Dell DVD - The DVD has only the operating system... Went to my Dell downloads and click on my system registry... and I got "SERVICE TAG NOT SUPPORTED" someone KNOWS WHY? Should I call dell and ask them to send me the media? As he sits down, he already bytes > is not able to use the HD 7730 M for video and or continuous... Thanks for reading and I appreciate any help!

  Please someone with the help on this?

• My Dell 15R crashes if I play a game (GTA IV, II M.a.f.i.a) for about 3-4 minutes and BSOD appears

  I just got a new Dell 15R (i7, 8 GB of RAM, 1 TB HDD, AMD HD 7730 M 2 GB graphics) and I tried to play M.a.f.i.a2 with and without steam and twice, after playing them for 3-4 minutes, the game crashed and BSOD appeared. It happened so in GTA IV. I've updated my graphics driver, but it made no difference. I also did a system restore, which also did not work. The error that I got from the event viewer:-System - Provider [name] Microsoft-Windows-Kernel-Power [Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4} event 41 Version 2 level 1 task Opcode 0 keywords 0 63 ID x 8000000000000002 - TimeCreated [SystemTime] 2013-01 - 21 T 18: 52:05.392015600Z EventRecordID 12512 correlation - execution [ProcessID] 4 [ThreadID] 8 channels computer system Kasutaja-PC - security [UserID] S-1-5-18 - EventData BugcheckCode 278 BugcheckParameter1 0xfffffa80080424e0 BugcheckParameter2 0xfffff880015aaaf4 BugcheckParameter3 0 x 0 BugcheckParameter4 0 x 2 SleepInProgress fake PowerButtonTimestamp 0

  This BSOD could be linked to the power options?

  Yes. No guarantee, but when playing system emphasizing games that you want to use the High-Performance option.
  The other options are there to help extend a battery charge, but you can not expect to
  play these games on the battery (for long), or without as much power as possible.
  Your graphics for laptops is certainly capable.
  .

• Reference Dell 15R 5520 Webcam

  I installed Windows 7 in my Dell 15R 5520 (ubuntu version). Downloaded drivers from dell website. All of them are working fine but still i cant find any driver for its Webcam.I tried Dell Webcam Central but Camera isn't working.Moreover i can't see Imaging Devices in my Device Manager. Please Help!!
  

  Hi all

  There is no need for the service number or any warranty claim. You don't need that it should be considered by another person.

  The problem is the cable from the webcam which is a bit short in length. Whenever there is a Jolt in the treatment of the laptop, webcam connection disconnects, and you won't see webcam in imaging devices. There is no driver for webcam. Just install central site webcam Dell Web is sufficient.

  The following procedure solved my problem.

  You just need to remove the border covering the top of the screen and connect the white switch (between microphone and webcam). It will automatically detect the webcam and the microphone. No need to stop your laptop. You can do it when you want. Avoid closing and opening the top cover to the center of the screen as it releases the connection and you need to repeat the steps above.

  http://www.YouTube.com/watch?v=TuEkjKa3B1M

  To remove the cover, get help from this video.

  03:00-03:30 (just remove the covering from the top. Replace the connection & no need to remove all of it.)

  I hope this helps.

  Thank you.

  Faisal Dilbagh

  Pakistan

• Reference Dell SFP and SFP + transmitters suggested M8024-K

  Which are issuers recommended Dell SFP and SFP + for the M8024-K blade pass?

  In particular, I would like to know the numbers for the following:

  1 integrated SFP

  1.1 10GbE SFP + SR

  1.2 FPS 1GbE

  1.3 FPS 1GbE RJ45

   

  2 10GbE SFP + plug-in

  2.1 FPS + 10GbE SR

  Your help is appreciated.

  Here are the part numbers, that I have just listed. SFP transceivers are supported only in the fixed ports and will not work in the FlexIO module.

  10GbE SFP + SR = RK0CX
  SFP - 1 G - SX = 63GGJ
  SFP - 1 G - LX = VYW04
  SFP RJ45 1GbE = PF911

• Reference Dell backup and restore is unable to create a DVD of recovery on Windows 8

  Dear Dell,

  I am creating recovery discs "Dell backup and Recovery application" but when I was asked to insert the second DVD, the optical drive keeps rejecting DVD. The application will not continue to burn the second DVD and seems to be frozen. I tyied with different DVD brands/manufacturers and also-/ + r unfortunately. The question remains. I could find this 593906 article published 21-01 - 2013 (http://support.dell.com/support/topics/global.aspx/support/kcs/document?c=us&cs=19&docid=593906&doclang=en&l=en&s=dhs link). Although I did the updates, I'm still not able to create recovery discs!   File: after having inserted the Disc 3 application gives the message "Dbr.exe-" not found disk and stays there and rejects the DVD.  I spoke with the Greek team of Dell. I was told that warranty does not cover the support of sw even if my unit is less than a week. Furthermore, I learned that although "Dell backup and restore" application said THAT DELL is not actually a Dell product so they can't support. They my proposed to use the recovery of files from windows 7 place (which needs at least 8 DVD!). As you can understand it's a workaround and not a Solution.

  I hope that someone from Dell will consider the issue and to come back with a precise answer and a permanent solution.   (Model: inspiron 15 3521). Thank you

  Hi ylikonomos,

  You can try to uninstall and reinstall Dell Backup and Recovery Manager and Dell Support Center. Follow these steps:

  • Press the Windows key + 'X' on the keyboard.
  • Select "Programs and features" in the context menu that appears in the lower left corner.

  

  • In the list of applications, uninstall Dell Backup and Recovery Manager and Dell Support Center.

  Below, check the version of the BIOS installed on the laptop. Press Windows + "R" key, type msinfo32 and press ENTER.

  

  

  Identify the version of the BIOS. If A04, the update of the BIOS is not necessary. If this isn't the case, update the BIOS. Before flashing the BIOS please check this following:
  * No external device (printer, USB stick, SD card, DVD) must be connected.
  * All other programs should be closed and saved documents.
  * The power adapter and the battery must be connected during this process. The battery must be 10% or more than 10% of charge.

  Here is the link for the update to the BIOS: http://dell.to/VBwSAh. The laptop restarts after this update.

  Visit this link: http://dell.to/VBz1fr and click Dell Support Center. Download and install the application.
  Once done, visit this link: http://bit.ly/UUjIs0 and install Dell Backup and Recovery Manager. Restart the computer and check if you are able to create the recovery media.

  Please, try the following steps and share status.

• Reference Dell backup and restore - "an error occurred during the creation of the backup of the system"

  I have a Dell XPS-8700 running Windows 7.  I bought the Dell Backup and Recovery Premium Edition.

  I was able to create a backup bootable (hot spare), and I can create a backup of data on my external hard drive.  However, whenever I try to create a backup on my external hard drive system, after about three seconds in the process, he returned: "an error occurred during the creation of the backup of the system.

  How can I create a backup of the system?  Why I get this error?

  Thanks for all the info. My situation sounds very similar to yours.

  I removed using Add/REMOVE programs in the control panel DBR and he removed cleanly.

  V1.7.1.2 downloaded and executed new facility.

  When I ran, it was my premium license key so he had yet to register and was not removed by uninstall.

  As before, Rescue Disk ran and installed the new partition (DBR_BOOT) on WD Passport.

  However, backup system immediately stopped with disconnected, missing target location or full. Tried several times...

  In any case, sounds like you have solved your problem, so you like OP should this brand this post/thread as answered. I will continue to post on my other thread.

• Reference Dell backup and restore: "merge system backups?

  Hello...

  I have a problem with the Dell backup and backup (version1.8.1.70). Everything works fine except for the "merge system backups. When I click it, nothing happens. I would like to know what I can do to get it working again?  Thank you.

  My computer: Dell Inspiron all in one model 3048

  Problem solved!

  I have uninstall backup Dell and recovery version 1.8.1.70 and reinstall version 1.8.1.71.There no problem, now, all work great so far. I am happy!

• Reference Dell backup and restore =?

  This software was preinstalled on my newly purchased Dell Inspiron 3646... can't make heads tails ov er it.

  

  Hi John Sellers,.

  Applying Dell backup and recovery seems to be corrupted. I advise you to reinstall the Dell backup application and system restore using the link below and check if you are able to restore the system.

  http://Dell.to/19QaFSu

  Please let me know if it helps.

• Reference Dell backup and restore (Premium Edition) 1.7.5.63

  Since upgrading my software Dell backup and restore to version 1.7.5.63, I now have problems to make it past the "Dell backup and recovery Please Wait" screen.

  I'm not leaving this option to run for more than 8 hours, but found that this process is not always successful. The only way I could find to block this process to run is to click on the? at the top right of the screen, then select "activity log". At this time, I clicked on the home button to take back me to the Dell Backup and Recovery Premium Edition home page and close the application. However, when I tried to re - open the application again, it brings back me to the screen "Dell backup and recovery Please Wait".

  To solve this problem, I tried to restore from a previous backup I made of the Dell Backup and Recovery application but it failed miserably and corrupted my hard drive and operating system (Windows 8.1). So the only way I could get back to who had to go back to my backup bootable disks that I created when I arrived to my laptop Dell Latitude E6530.

  Then I had re-installed all the 100 + updates of Windows for upgrade to Windows Pro 8.1 by the Windows store. From there, I upgraded my software "Dell backup and restore (Premium Edition)" at 1.7.5.63 and had the same problem again.

  In any case to have a fix for this or tell me how I can raise an incident with Dell, because this is so ignorant and frustrating.

  If I uninstall my Dell Backup and recovery software (Premium Edition) and reinstall the version found in http://www.dellbackupandrecovery.com/en-us/Index.html , but the last time I did, it installed the basic edition and not the Premium edition.

  All right enough the last time I had problems with my Dell backup and recovery (Premium Edition) software, it seems to settle on the other updated after a few months, but I don't don't want really to go back to an earlier backup with an older version of the recovery (Premium Edition) software and backup Dell.

  Any help or advice, you would be extremely grateful.

  I'm shocked that Dell is detrimental to Windows backup in Windows 7 Professional.  Your comments here persuade me not to pay for the premium edition.  Various people on other internet research said Dell had a great program backup, 6 months ago, but weakened while it is able to sell a version Premium, also hobble the program backup Windows.  You might try a free backup software like Comodo as I suspect that you can not use the Windows backup which makes a backup with files image.  It was a very simple approach that Dell seems to have stuck in their new versions of Windows 7 Professional.  I restarted my computer because of this kind of game.  Since I bought it at Costco, I have 90 days to return it.  I also started watching a series of online backups.  Carbonite seems terribly clutter my computer, and while highly recommended, it is slow, slow, slow.  I am CrashPlan that seems to work much much much faster.  Both of these are paid services.  CrashPlan has a lot of versatility to accommodate beginners to evolve into something much more powerful.  They have free versions for recording to hard drives and other computers.  The online version has Unlimited storage, much versatility, without the limits other plans have, and it's only 4-6 dollars per month, depending on the current sales and payment terms.

• Reference Dell backup and restore will not be updated

  I have just updated to Windows 8. 1.

  When I checked the notifications told me that Dell backup and restore was inconsistent and I needed to re - install. Before all else, I checked the Dell website and it is advisable to update the program by opening and clicking Update.

  Unfortunately, when I click on control upgrade tells me that my request is updated according to the picture below.

  

  Is there another way to update the application?

  Go to www.dellbackupandrecovery.com

  Uninstall the old version and install new then.

  Here's a direct link:

  www.dellbackupandrecovery.com/Dell_Backup_and_Recovery_1.7.5.64.exe

• Reference Dell M620 and M820 ESXi 5.1 installation

  I'm relatively new to VMware on Dell hardware. The closest thing that I believe to a custom image is 'VMware ESXi 5.1 update 1 Image Recovery"(http://www.dell.com/support/drivers/us/en/19/driverdetails?driverid=RD5JN). I assumed it to be ESXi 5.1 update 1 with favorite Dell specifc driver packages. I had planned to use this new installs feeling that it would include the latest drivers for my Dell M620 and M820s and would be preferable to base VMware image.

  1. It is the support for the installation of these blades?
  2. The description says « Ce ISO image should only be used to restore/reinstall VMware ESXi on image for SD Card/USB Key on the supported Dell platforms. »
     • I am confused by the specification 'only' restore/reinstall and not install.
     • Also confused by the mention of the only card SD and USB to the apparent exclusion of standard hard drives.

  I installed with it as a test and it looks good, but I'm uncomfortable with the description. I would be grateful for any additional information or insight to those who support ESXi in Dell stores.

  Hi vmproteau,

  Here are my answers to your question based on my experience. I have no experience with the M620 or M820 I manages around 240 M610, 60 R710, the R720 10, so I am familiar with Dells ESXi 5.1 servers update 1.

  (1) Yes, I would recommend using the ISO provided Dell printer if you are not familiar with creating your own package with the necessary drivers and firmware.

  (2) this ISO standard will include all drivers for supported Dell servers and some customizations of Dell and can be used for new installations regardless of the storage (SD, USB or HD Local) option. I would like to look out for is mainly to make sure that you update the firmware on all of your blades with the most recent available by Dell that ESXi is very picky with the pilot and also incompatible firmware Dell CMC with thanks to a few mistakes from time to time.

  Kind regards

  CROD

• Battery indicator LED of DELL 15R 5537 (i5 6 GB 500 GB Touch WIN8) no light upward when the charger is connected

  Hello

  I just got a Dell 15R 5537 (on September 29, 2014) and when the laptop is turned on or off, the led on the front of the PC does not illuminate. What is the problem? should I get it replaced?

  Jason

  Hi Jason,

  The following led lights only when the AC adapter is connected to the system and is in charge of the battery.

  

  If the light is not lit when the AC adapter is connected to the system then I suggest you try to Flash the BIOS of the system. Please enter your service tag # on the link below, select the operating system and then download the BIOS from the system BIOS section and install it.

  http://Dell.to/18r60nI

  Please let me know if it helps.

• How to make Garland dell p2715q and p2415q with macbook pro

  I bought 2 Dell montors, the P2715Q and the P2415Q, with DP in and drawers for chaining. I use the mini DP to DP of the cables provided with the monitors. They do not only mirrored between them and the Garland. I can, however, connect the two cables DP minis on ports 2 Thunderbolt on my MB Pro 13 "2015 Early and both monitors to display as independent observers in the display preferences, no problem. The only thing is that daisy chaining them does not work. Any suggestions or solutions?

  Early 2015 13 "Pro MB, 8 GB RAM, Core i5 2.9

  10.11.6 OSX

  Monitors: Dell P2715Q and P2415Q

  To my knowledge, OS X is the limit. He has never supported other than own Apple Thuderbolt poster chaining.  You can do a quick web search to see if it has changed, but this question has been around for years and I've never known anyone to get 1.2 DP chaining to work with something other than Apple monitors.

• How to create a component of the entity and then add a reference to it, in a web site project solution. site when you want to do.

  I have Visual Studio 2010 Professional. On the start page, I started with file, new Web Site and you click New ASP.NET Web Site. I created a new web site and added a default.aspx page. I want to create a library of classes (entity component) and then use the Solution Explorer window to add a reference to the class library project to the web site solution. I'm trying to do from the start. in other words, a request has not created to which I simply add web pages. Is this possible?

  Or do I make file, new project, and create a new web application in place initially to create the class library and to add a reference in the Visual Studio solution.

  Hello

  Check out these resources:

  MSDN - Visual Studio Developer Center
  http://msdn.Microsoft.com/en-us/vstudio/default

  Visual Studio MSDN forums
  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio

  MSDN Visual Studio, and related Forums
  http://social.msdn.Microsoft.com/forums/en-us/category/vsvnext, visualstudio, vsarch, vsdbg, vstest, vstfs, vsdata, vsappdev, visualbasic, visualcsharp, end, visualfsharp

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">