Dell A920 printer interface has stopped working. Why

Similar Questions

• Printing status window Interface has stopped working

  I have a new computer with Windows 8 and an old printer Dell720.  I found a driver and the printer works with the new computer.  The printer was working without any problems, when I received the message "the Print status window Interface has stopped working".  I also had a "Low Ink" pop-up window.

  Any help to solve this problem would be appreciated.

  OK, I found a way to deal with my problem.  Apparently the problem centered around the printer sends a message to the computer that the ink cartridge is low on ink.  I said to the computer I installed a new print cartridge (but I do not actually have) and now the printer works.

• Printing status windows interface has stopped working

  Original title: what to do when I try to print a statement and get a message {windows printer interface status stopped working]
  The document is through Adobe reader

  Hello

  1. what operating system you are using on the computer?
  2. What is the brand and model of the computer?
  3. not the problem only occurs when you try to print the document using adobe reader software?

  
  Method 1:
  You can try the procedure described in the link and check if it helps:
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  
  Method 2:
  You can also see the following article from Adobe to solve the problems on the issue.
  Resolve PDF printing problems. Acrobat, Reader
  http://kb2.Adobe.com/CPS/873/cpsid_87346.html
  
  Alternatively, you can contact adobe about this issue.
  http://forums.Adobe.com/community/adobe_reader_forums

• "Dell WLAN Network Card" has stopped working

  Windows gives me a message that "Dell WLAN Network Card" has stopped working. It is a common problem and is there a solution?

  PS: Is alternative medium n to go to the uninstall step (your step 2)? I don't have the "Run" command in the start menu. It is a Dell laptop, Inspiron with Windows Vista Home version.

  Thank you

  If you have a key of Windows on your keyboard, press Windows + R

  Otherwise, right click on start > properties > customize > Advanced tab > scroll down to the list of "items on the start menu" until you get on 'Run' > check the box "Run" and OK your way out.

  If you use the "Start menu classic", it is not "Advanced" tab and the check box command run figure in the list 'Advanced options from the start menu.

• Microsoft Windows error message: "Dell DataSafe 2.0 has stopped working".

  On my new laptop purchased recently, I get an error message from Microsoft Windows: "Dell DataSafe 2.0 has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. "I then select the" close program"button to close the message.  But, no info additional re: a solution is always provided and within a few seconds the error message recurs, repeatedly.  It's maddening, it goes without saying.  My DataSafe account is current and operational.  I can't find any info on the site of Dell re support: this error, probably because it's a message of Windows...?

  But it's a Dell software!
  You look at not only their website, contact you them directly.

  Contact Dell: http://support.dell.com/

  See you soon. Mick Murphy - Microsoft partner

• MSASCui.exe failed 0 x 80000003 & Windows defender User Interface has stopped working

  I can't update windows and spybot will not run. AVG says no active components. When I restarted I got this MSASCui.exe message the application failed if initialize properly (0 x 80000003) click ok to complete the application. Then I got the message that Windows Defender user interface has stopped working. Also earlier while trying to ask this question box in my speakers one ad for Charmin and part of a kind of talk show or something.  It also happened just before I open IE to ask this question. PLEASE ADVISE!

  I thought that this update last night, but I guess no, here is what microsoft online malware remover found

  Exploit Java/CVE-2008-53
  c:\users\diana\appdata\locallow\sun\java\deployment\cache\6.0\3\12a49b83-322e820c
  c:\documentsandsettings\diana\appdata\locallow\sun\java\deployment\cache\6.0\3\12a49b83-322e820c
  MYF/y/appletx. Class

  Trojan:Java / Selace.A
  c:\users\diana\appdata\locallow\sun\java\deployment\cache\6.0\3\12a49b83-322e820c
  c:\documentsandsettings\diana\appdata\locallow\sun\java\deployment\cache\6.0\3\12a49b83-322e820c
  MYF/y/loaderx. Class

  Trojan:Java / Selace.B
  c:\users\diana\appdata\locallow\sun\java\deployment\cache\6.0\3\12a49b83-322e820c
  c:\documentsandsettings\diana\appdata\locallow\sun\java\deployment\cache\6.0\3\12a49b83-322e820c
  MYF/y/payloadx. Class

  Earlier, I heard another ad for the outdoor channel. Help, please!

  I have Vista I know makes a difference in what I do.

  It looks like something very funky happening with your Internet Explorer program.  It looks much like malware to me, but if you ran several scans with different products, then that may not be the case.  You can try several above - but you probably won't find anything (but you might--sometimes a virus is very sneaky and that one or two anti-malware programs are able to deal with them).

  Since it seems to be a problem with Internet Explorer, I suggest that repost you your question (with a link to this topic so that they will know what's already been tried) to the Forum of Internet Explorer http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/threads where people who specialize in issues of IE will be happy to help you with your problem.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• Data Manager has stopped working, why?

  Data manager for windows 7 has stopped working, why?

  Well its back to work once me again, as to what happen'd, thank YOU nice people

• OfficeJet Pro 8600 Plus: double-sided printing HP8600 has stopped working

  My HP8600 911 g printer double-sided printing has stopped working. Duplex accessory is still in place. Forum told to go into system preferences, open print queue and click on the driver tab. There is no driver tab. Just, it displays 'Driver 2.0' and does not give me the option to change this.  Don't know why? Duplex to work properly and now it doesn't. Any help would be greatly appreciated. Thank you!

  Hello

  I guess you can use AirPrint driver seeing your description.

  If please, try to add the printers printer & scanner, this time, click the use drop down and select the model of the printer default AirPrint option instead.

  Now check these settings and try to print a double-sided work again.

  Shlomi

• Cannot install the printer. spoolersrv has stopped working

  setting up a printer and get a message error-spoolersv has stopped working and was closed - what should I do?

  original title: Spooler problems

  Make sure that the printer is compatible with Vista and that you use the correct software, driver and firmware for the printer AND your version of Vistahttp://www.microsoft.com/windows/compatibility/windows-vista/default.aspx.  Go to the web site of the manufacturer and get the files the most up to date available for your printer and your version of Vista and re - install to make sure that you have the most recent versions (those that come with the printer may be obsolete or wrong operating system).

  How do you install the printer?  What is the manufacturer, brand and model printer?  This printer has already worked before or is this new - and if it worked before, it never installed on a Vista system?  Is it on a network or connected to a single PC (and how is it connected)?

  Go to start / Control Panel / Admninistrative Tools / Services and check that the print spooler is set to automatic and started - if it isn't.

  Check the settings on the control panel of the printer itself to ensure that it is correctly configured.

  If necessary, go to start / Control Panel / Printers and right click on the printer and select properties and choose Print directly instead of via the spooler and see if that solves the problem.

  I hope this helps.  Keep me in the loop.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Lexmark X 1180 printer driver has stopped working?

  has stopped working with my computer windows 7 Samsung laptop lexmark site has no driver for windows 7 is - anyone know where I can update the driver please.

  According to the website of Support of Lexmark X 1180 is compatible with Windows 7 using the Vista driver on their site: http://support.lexmark.com/index?locale=en&page=product&productCode=LEXMARK_X1180&segment=SUPPORT&userlocale=EN_US&frompage=null

• (Redirected) Winphlash user interface has stopped working

  I have an Inspiron 1501 - it's old, but it woks great...  I tried updating the BIOS by following the instructions on the Dell site. I repeatedly get the Winphlash User Interface stopped working. I see that others have reported the problem for years back, but nobody has a solution. Can someone tell me the proper technique to make this update of the BIOS without errors? I don't get all the instructions online - only a type BACK window then disappears.

  Also located on the site of Dell drivers, my NOTE to the ADMINService tag: maintain the label removed by privacy policy > and then I get the message that my operating system Windows Vista Home Basic is not available on the machine - but it was purchased from DELL with this OS?

  Thanks in advance for any help/direction.

  Jack

  Hi orangedell2,

  Please repost this in the laptop computer forum for faster assistance.

  http://en.community.Dell.com/support-forums/laptop/

• Printer Spooler has stopped working. SE message spooler subsystem app stopped working and was closed. Can someone help me to leave?

  I have a Dell V305 printer. For unknown reasons, all of a sudden, I could not print. I couldn't choose a printer because mine was not listed. I spent two days trying everything I could find to get the printer spooler is working again. I rebooted a million times in administrative tools.

  Hello

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

• Office Jet 4500: HP Solution Center has stopped working, why?

  After the upgrade of Windows 10, my Officejet 4500 works perfectly, until recently (Christmas break) and now the "Solution stay" does NOT, why?

  Have uninstalled, reinstalled, tried HP Print & Scan doctor, but it still does NOT work!

  Any ideas?

  Hello

  Thank you for using the forum.

  Try this solution:

  1. Enter "View installed updates" in the search bar of Windows.  It will show you an option in Control Panel.

  2. click on the option.

  3. Select the "Security Update for Microsoft Windows (KB3132372)" and an uninstall option will appear next to the drop-down list to organize.

  4. click on uninstall and work through all the guests.

  5. Once uninstalled, the HP Solution Center should work.

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement.

• Wireless printer HPLaserJetP1102 has stopped working

  Today at the office that I tried to print as usual and the pc says "printer is disabled", but the printer IS ON.

  Impossible to find a solution, I even deleted the printer devices and added, but nothing has changed.

  I turned off, return, unplugged, you leave all programs but nothing...

  Anyone have an idea? !!! Thank you!

  Moved to windows

  I would contact HP support.

• I can't install the driver for my Canon iP2702 printer, which has stopped working.

  I bought a new one, same model, same problem. It works on another pc, but I can't just install the driver of any method. I also tried a different model (Epson C86), same problem. I restarted the print spooler, delete the registry files before reinstalling, tried to use the disk, using the latest version of the following driver from Windows Update Wizard "add a printer" - nothing works. Can someone please suggest a solution? I can not "add a printer", who immediately said "not responding". If I restart the spooler, it progresses to the next page, where I can choose only "use an existing port", but having said "Operation could not be completed.

  Have you tried to download and install the latest Vista driver on the Canon site (instead of using the CD or Windows Update) here:

  http://www.canon.co.uk/Support/Consumer_Products/products/printers/InkJet/PIXMA_iP_series/PIXMA_iP2702.aspx?type=download&page=1 ?