Dell coming Pro 8 do not wake from sleep

Similar Questions

• Dell coming Pro 8 doesn't wake up not the mode standby

  Twice now, when I leave my only DV8P and it goes standby mode, I can't do the wake him up.  The first time I had this problem, I could close it in connected state and it reboot.

  Both times, the battery was almost at full capacity.  It is not a battery problem.

  To my knowledge, I have updated the latest drivers.

  When I got my DV8Pro I had no problem with the sleep/power button.  After the installation of windows updates and dell updates my DV8Pro would not wake from sleep.  I had to hold the power button to the low during at least 10 seconds release the button and press it again and then it might start up.  I tried to uninstall the updates one at a time and that has not fixed the problem.  Has decided to start again and went to "Recovery Options" and select "Get Started" from the "all delete and reinstall Windows.

  My BIOS has been updated as a step to try to cure the problem of sleep and any withdrawal does not have to uninstall the update of the BIOS.  I mention this because maybe that helped my question because the re - install windows has been done with the latest BIOS. If you encounter this problem, maybe you want to update the BIOS before the re-installation of windows.  The BIOS, I used is A04.  (if you want to check your BIOS in the type of research "run" charm. Press enter on the key board, and then in the box that opens type "msinfo32" and click ok.  Look at the entries and you will find the version of your BIOS).  The latest BIOS for the DV8Pro is on the site of dell under support.  I think that I have also updated the update of the firmware on the chip before I re-installed windows.

  During the re-installation of windows, I have selected custom set upward and chose to not allow windows to update automatically.  The next step was to install all updates to the Dell web site DV8Pro.  After that all Dell updates have been installed, I went the updates of windows and installed every update, one at a time manually. After each update, I checked to see if the sleep problem reappeared.  This process took some time and I don't know what would happen if you installed just them all at once.  I know that from the top of the list and the installation of each of them individually has fixed the problem.   I still have my defined not updates have it automatically installed and today, there are 3 more updates.  Each of these one at a time, I installed and it still works.  Internet connection is also good, I checked after each update also.  I have not changed a new wifi again.  All this was done at home.

  Look well, it is a very frustrating problem and I almost all upset but I like the device so I gave him a good try to make it work.

• Satellite U500 - may not wake from sleep

  Hi all

  I have a Satellite U500 laptop win7 64 bit and my system may not wake from sleep mode.
  "Standby mode" when I press the power button or any key of the keypad power led lights up but the screen stays black and the system is unusable.

  Any help?

  Have you noticed this problem in the first moments after upgrade to Win7?
  I assume that you made a mistake with Vista?

  Have you noticed the same behavior when you use hibernation mode?

• my computer would not wake from sleep when the cover iclose & open again?

  When I close the lid on my computer & open it again, the computer does not wake up, it shows just a black screen!

  Hi George,.

  From the description of the problem, it seems that the computer would not wake from sleep when you close the lid and open it again. I understand the inconvenience.

  Let us, try to perform the following methods and check if it helps.

  Method 1: Run the troubleshooter of power

  Open the troubleshooter of power

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  For more information, connect to:

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  Method 2: Troubleshoot wake the computer from sleep mode

  http://support.Microsoft.com/kb/266283

  Method 3: Update Chipset drivers

  Download and install the latest version of drivers for chipset for the computer on the computer manufacturer site and check if you are faced with the same question.

  Method 4: Run the BIOS update

  I would say as you perform the update of the BIOS by contacting the manufacturer of the computer, check if it helps.

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you

• DELL Inspiron N5110 does not stop and does not wake from sleep

  Hello.

  I have Dell Inspiron N5110, who cannot stop it in Windows 7 or Ubuntu Linux. Specifically, I started Ubuntu Live from CD to eliminate the possibility that the problem is in Windows 7. Stop in Ubuntu does not work either. This proves that the reason for not an application in Windows that remains suspended and does not allow the laptop to close.

  The laptop computer may not wake after sleep or either Hibernate.

  I tried all the solutions that advised you to all the other people in the forum who have the same problem.

  1. the laptop cannot stop mode safe either.

  2 may not stop even after clean boot Mode - all services disabled and all package disabled Startups.

  3. I haven't tried to change the Power Options Advanced "Allow hybrid sleep" - both WE "On AC Power" and "Battery operated" - no change.

  4. I tried to install the latest NVIDIA video drivers. This did not help either.

  5 running only on battery change nothing - not cannot always stop.

  6 race only on AC adapter without battery - still cannot stop.

  7. I tried to remove the AC adapter and the battery, and now the POWER button for 30 seconds to RESET the phone - did not work.

  ATTENTION: I have read your forums all day and has seen at least 10-15 reports on the same problem, and not a single case fixed.

  8. This is why I have not tried Flash the BIOS with the latest version - I have read other people who have tried and it didn't work either.

  9. I loaded the BIOS default settings (F9) - stop still can't.

  NOTE: Change something in the BIOS and getting out once caused the laptop to freeze and I had to power off by holding button for a longer time.

  10. I ran DELL Diagnostics menu Boot (F12 at startup) - no error found.

  11. I couldn't find IEEE 1394 adapter in Device Manager to change the power management settings.

  In fact, none of the suggestions that you can give to change something in Windows is logical because I already mentioned that stop in Ubuntu does not work or the other.

  The question seems to be either in BIOS or a hardware problem. But which component? This is the CD/DVD drive?

  It is a new laptop.

  Please advice how to proceed. If you know which component fails please tell me.

  Remove the keyboard and palmrest (dell guide shows you how) and you should see a small button battery. Remove it at least 10 seconds, then put back. Enter the BIOS and make sure that there is nothing weird was changed. It should work fine now. I had this work in Ubuntu 12.04 these last days with no problems.

• Reference windows xp Dell does not wake from sleep mode

  I am running XP service pack 3. When I try to wake up computer sleep mode orange light flashes but will not start. I hard reboot - sometimes the work - sometimes not. Sometimes he began alone. It is an intermittent problem.

  Hello

  Try the procedure described in the following article and check the status of the issue.

  Solve problems to wake the computer from sleep mode.

  http://support.Microsoft.com/kb/266283

• elitedesk 800 does not wake from sleep, performed a start rather

  HP EliteDesk 800 G1 USDT Win8.1 Pro 64-bit

  After the sleep mode to not wake up the keyboard or mouse click.

  Pressing the key Power performed a clean boot from the stop.

  Computer came with Windows 7 Pro. I installed Windows 8 since the disks provided with the computer and improved online at Windows 8.1. Everything seems to work fine, but the modes of Eve/hibertation.

  By pressing on a keyboard or screen sleep button apparently sends computer standby: the screen is black, white power button mouse and keyboard LED off, LED blinks once every two seconds.

  However computer not wakes up on a key on the keyboard and pressing a button / a computer turns on, but does boot upward as if it were completely off.

  Already checked for the latest version of the BIOS and enabled for keyboard and mouse power management.

  Hi Jaco,

  Thanks for your suggestion. I tried to experiment with the settings of power for the keyboard and the mouse, and simply made sure that both are enabled to wake the computer from sleep mode. I began to suspect that he may be the controller USB keyboard to wake the computer asleep, and I've experimented with a PS/2 keyboard without result.

  Then I reread in BIOS settings help mode "standby" should be indicated in triple LED flash, and I was getting only single blink of the LED, and I started to look into each option in Advanced settings of the power management and guess what I found?

  THE SOLUTION

  When I turned the sleep > allow hybrid sleep set Off, "sleep mode" started working:

  By pressing on the sleep button sends computer mode 'sleep', white LED travels triple flash and two seconds apart, and by pressing a key on the keyboard wakes the computer.

  Apparently my hardware configuration somehow comes into conflict with the Win8 hybrid sleep mode. SSD?

  HP EliteDesk 800 G1 USDT Core i7-4770 8 GB (2x4GB) DDR3 256 GB SDD,

  DVD +/-RW, keyboard, mouse, GigLAN,

  WIN8.1 Pro 64

  Thanks to all for lead me to this solution!

• X 1 yoga (and Yoga 260) does not wake from sleep

  Hello

  We got 2 x try and buy Lenovo Tablet portable Yoga (a X 1 Yoga and a Yoga 260) to assess their skills for our company, because we have the intention to upgrade many of our employees laptops. However, since we got the devices we noticed on two common problems with display and waking from sleep. Very often laptops awake properly with the screen remains black. In these cases, the backlight of the display seems to turn on, and I guess the system works somehow in the background. Put the computer to sleep again (for example, by closing the lid) makes the computer wake up correctly at the second attempt.

  Different error in the same category is when a video is running and the laptop is connected to AC - plug the AC cord is black screen while playing the media kept its content.

  All drivers have been updated to the latest version via 5.07.0029 Lenovo system update.

  Any ideas? I also tried to open a support ticket, but Lenovo wanted to send and install a new (!) presentation. Apparently, it seems like a driver/software problem?

  Best regards

  After finishing with a touch screen not responding not (as far as I can tell a result of v4.19 Touch Firmware Update) on top of the issue of the sleep-wake I'm frustrated and went through the process of reinstalling the entire system.

  I used the reset at startup procedure to put the system back to factory settings. After factory reset the sleep-wake issue had disappeared. I applied about all the updates that are currently available via Lenovo system update and everything still works as expected. Still strange that this issue was not solvable by any other means before...

  Interesting effect: after the reset of the touchscreen remained non-functional. After a few days without touching the laptop screen feature has finally decided to detect the HID. I certainly did not apply to update or change. 'Miracle' is almost an understatement in this case!

• Monitor intermittently do not wake from sleep mode

  I have a new Pavilion 500 - 205t Windows 7 Desktop (two weeks).  Two days earlier, after the computer is in mode 'sleep', the computer would wake up, but the screen would not.  I contacted HP Support and they said not to put the computer in mode 'sleep', but to turn it off instead.  They said that the computer could accumulate a static charge which could prevent the monitor to wake up from sleep mode.  Their solution was to force a shutdown by pressing the power switch, unplug at the back of the Tower, by pressing the power switch for 20 seconds, plug everything back in and then turn on the computer.  The monitor worked correctly then wake up from sleep mode.  For the last two days, the computer would wake properly from sleep mode.  Today, the same thing happens again.  This time, I turned off the computer and then he turned back to (without unplugging everything) and the monitor worked correctly.

  Here's my question:

  Is it really a static problem? (It has been cold and dry here for several weeks and static is high)  Or I have a hardware problem or software that needs to be fixed?  Thank you for your time.

  I think I found the solution to this problem for my computer.  I changed the settings for sleep or sleep 'Hybrid' or 'Hibernate' is allowed.  Since then, I have not experienced the problem.  I also changed what does the power button, so that when I press the power button, the computer shuts down normally.  This prevents a "forced" shutdown if the problem happens again.

  Thanks again Bill, for your time.  I mark this problem is resolved.

• Satellite L750 - does not wake from sleep mode

  Hello

  I just bought a Satellite L750 and he didn't wake up from sleep mode. I force with button stop / stop each time in switching mode 'sleep'.

  Any ideas?

  Are you using the original pre-installed OS that you got with your laptop?
  Have you noticed the same problem with the hibernation mode?

  Did you install additional software?

• T500 does not wake from sleep mode

  My T500 (2241-3XU with Win 7 64 bit Ultimate) has never been able to wake mode 'sleep', once the lid is closed. I have finally returned to the use of hibernation, but I was just wondering if there is a new patch that I'm not aware of. I tried to find info a few years back before hibernation. Any ideas?

  Thank you.

  Dave

  Try to install the latest version on it. 1.62 should collaborate with the T500 however.

  You can also see if your BIOS is up to date.

• W510 does not wake from sleep

  When I close the lid or let it expire and go to sleep he does not wake up when the cover. It doesn't happen every time, but it happens about 8 links on 10.

  You can tell it's still on, but the screen remains black.

  I searched and didn't find any resolution that worked for me.

  A recommendation was disable incident reports, and that did not work.

  I preformed also all updates of the firmware as well as the upgrade to windows 8.1.

  The problem is exactly the same point 8.1 as it was in windows 8.

  Just to follow up.

  I did a factory reset the origin of windows 8 and the problem disappeared.

  I think it may have been originally caused by my being too aggressive when bloating. I have uninstalled something I shouldn't that caused the problem in the first place.

  In any case;

  problem solved.

• DisplayPort monitor does not wake from sleep

  Hello

  just bought a Sapphire Radeon HD 7790 & realized, I could connect three monitors - yay.

  A few times the small monitor connected via displayport has not awoken from his sleep.  I have a beep as if remove the USB device.  The monitor power on / activate suits him.

  The two monitors connected with DVI awake without problem.

  I see threads referring to assign the displayport as the initial display adapter in the BIOS, but I don't see anything in the my BIOS (XPS 435MT) for graphics cards.  The GPU (I guess it's the GPU) set the dsiplayport as the monitor #1 monitor in the numbering system.  I understand that I have no control over this.  The attached DVI monitors are numbers 2 & 3.

  Carefully analyzed the logs of events during this time & can't find anything.

  Any help?

  Thank you

  Will update & reply to this message, I hope it helps someone else.  Apparently the TriXX is OK on the 7790.

  This YouTube video is my card:

  Video YouTube TriXX of Sapphire 7790 OC double-X

  If this does not work you can try changing the power settings in the BIOS - in my case, in the BIOS power management settings is not set to the sweetest sleep state.

  Right now the ACPI Suspend Type is S3 str:

  ACPI Suspend to RAM: ACPI stands for Advanced Configuration and Power Interface - that some people may find as options in their BIOS Setup programs. The Suspend to RAM, sometimes referred to as feature S3/STR, let the PC save more power in standby mode, but all the breast where the computer-related devices must comply with ACPI. Some BIOS have a S1/POS option for this scenario. If you enable this feature and you are having problems with the splash screen, just go back into the BIOS and disable. (not one of my options)

  Definition of ACPI to form of hunger more power to suspend for example s1 (POS) of power in standby mode could be the answer:

  S1: All processor caches are flushed, and the CPU stops the execution of the instructions. The power of the CPU and RAM is maintained. Devices that do not indicate that they must stay on can be turned off.

  S3: Commonly known as secondary, sleep or Suspend to RAM (STR). RAM remains powered.

• Laptop Dell Studio 1555 w / Vista does not wake from sleep when the lid is open.

  I have a laptop Dell Studio 1555 with Vista Premium 64-bit. Until last night, the laptop would run mode standby when I closed the lid and woke up when I opened the cover later. Yesterday I was downloading photos from a Canon camera via USB. I close the lid when I did. When I went to open the cover later the laptop screen remained in black and white. The power button is lit, but the only way I can get to meet is to hold the power button until it turns off completely, and then restart the laptop. A difference when the lid is closed, I think the power button will blink and turn off slowly while he was really in sleep. He remains on all the time now when the lid is closed. I tried to go into power management and put the laptop from sliding when the lid is closed, but has not made a difference.

  Run the system restore and choose a restore point created just before the problem occurred. Steve Winograd, MS - MVP (Windows desktop experience)

• (Redirected) Reference DELL 5547 Fan starts while that closed down and drains the battery at 0%, especially may not wake from sleep

  Hello

  When I turn off my laptop the fan starts to spin then and during a night, it drains the battery from 100% to 0. I also have some problems of marketing. If the computer is in sleep mode itself or by me, I can't wake up, need button for 10 seconds and then push again and it starts. When turned on, it works perfectly but has these problems. I read somewhere that the resolution of these problems has been to remove the software intel from my computer and I did. It helped but 2 days computer started having these problems again. My system is Windows 7 64 bit. This problem started after that I have somehow left fully charged computer asleep on the charger for about 2 hours. When I came back fan was spinning and the right side of the laptop was hot. Again, battery life is great and computer has no defects during the work (all tests by dell are passed). What can you suggest me to do?

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.