Dell Inspiron 1525 Webcam not working do not... Help!

Similar Questions

• Dell Inspiron 1525 primer not - please help!

  Hello, I hope someone can help me because my computer is no longer under warranty.  Thursday, my Dell Inspiron 1525 (bought in 2008) under the Vista operating system worked perfectly.  No problem at all.  Friday morning, I went to turn on the computer and turn on the 2 blue lights lower-left (the power and one next to it), the computer sounds like he's going to start and then it beeps once and dies.  He will continue to do over and over all a few seconds until I turn the unit off manually.

  I tried the trick out the battery and the power cord, press the power button and then connect the battery and cord, but it still does not work.  The computer will not start up using just the cord (and not the battery) and vice versa.  Anyone have any ideas on what might happen, or how I could solve this problem?

  Thank you in advance for any help you may offer.

  Hey, I have just the same problem and after a lengthy investigation and research, I fix it by deleting the RAM of the laptop, then it works fine.  so try to remove one of the RAM if it still does not remove the other and it will work... (:

• Dell Inspiron 1525 webcam problem.

  I use a Dell Inspiron 1525 laptop since 2008 and now the webcam is not working. I noticed that when I turned on the laptop, I get a flashlight blue color on the left side of the webcam, but now I do not understand that the blinking light. I installed the drivers from the dell support center webcam, but still it does not work. I bought this from a GCC country & now I'm in Sri Lanka, so I'm in two minds whether to get this repaired here or no reasoning that I don't know somewhere appropriate here. It'll be a big help, if I get a solution for this online.

  TKS

  Sébastien

  Hi Sebastian,.

  It was answered several times for you, please see the post following as an example:

  http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/f0123339-de5a-4D36-9ebf-cca67238ec06

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Dell Inspiron N5110 webcam not working not

  I am unable to do video calls on my laptop. It says install a webcam...

  srilatha_5884,

  PLEASE READ AND ANSWER THE QUESTIONS THAT I ASKED, BELOW.

  Recently install you / reinstall the operating system? If so, have you installed the drivers I have the right order? How to download and install drivers in the correct order

  Try to read...

  Troubleshoot the Dell Webcam and the Dell Webcam Central software

  Also try running the Webcam Diagnostics

  The webcam showed in the tree of the symptoms?

  Error messages?

  The computer is under warranty?

  Rick

• Dell Inspiron 1525 Microphone does not

  I have a Dell Inspiron 1525 with a built-in microphone. I run on vista. The microphone is not picking up my voice. I went to the control panel. I have made sure it is activated, and all volumes are rising. It is said that SigmaTel Microphone Array works, but that's not true. I also uninstalled and then reinstalled the SigmaTel driver. I did a system restore and that didn't help. The speech recognition does not pick up my voice either. All other sounds work fine, I built in Webcam which works very well, except for the record. But who is also defined on such sigma with all volumes upward. I've had this computer for over a year and the microphone used to work, I think that when I updated something she decided to not work. But I really need my microphone to work, and I am really frustrated because I can't use it. ANY advice would be appreciated thanks!

  Hello

  Control Panel - SOUNDS - Audio peripheral devices configuration-manager

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version on the tab of the driver in the device as a sound Manager often restoring drivers, then install
  the current version. Restart and check after each try, not uncommon to have to run the pilot of 1 to 4 times or more.
  Just make sure that the version you have installed appears in the tab of the driver.

  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check show disconnected devices
  and show disabled devices - check your micro - highlight them, then lower right properties. Do
  of course the appropriate injector is enabled and check that other settings - on the levels tab make sure MUTE is not checked
  and APPLY / OK changes.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx
  --------------------------------------------------------

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Dell inspiron 1525 laptop turned off and the sleeves to the top down and will not download anything

  Original title: inspiron 1525 will not download anything

  After being on my laptop for about 30 to 45 minutes it stops and it is very hot on the bottom.  It is not the battery.  She radiates from the bottom at the top of the computer.  I also can not download anything on this laptop.  I have checked everything and does not know what the problem is.  Any help is appreciated.  Thank you.

  Hi GayleMcClain,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  3. what happens when you try to download? You receive messages or error codes?

  You can check first with Dell support about the issue in connection with laptop closed and heat thoroughly.

  Check the link for Dell technical support:

  http://support.Dell.com/support/index.aspx?c=us&l=en&s=Gen& ~ CK = mn

  Hope this information is useful.

• I tried to install a jet Office NEVER USED 5700 HP on my Dell Inspiron 1525. Finally managed to do print the Pages of Test 3, now it will not print anything. What I am doing wrong? ___Pat-

  I have hp HAVE TENT TO REPLACE MY HP 3500 WITH A NEVER SERVED 5700 DESKJET.  FINALLY MANAGED TO DO PRINT THE PRINTER TEST PAGES 3, NOW IT DOES NOT PRINT AT ALL.  I AM TRYING TO INSTALL THIS PRINTER ON THE DESKTOP DELL INSPIRON 1525.  A DELL TAKE CONTROL OF MY COMPUTER THE OTHER DAY HE HAS DELETED MY OLD HP UNTIL I COULD FIND THE CORRECT CD FOR HER.  ENDED UP WITH NO PRINTER AT ALL.  THIS ONE IS MORE RECENT ALL CARTRIDGES WERE STILL IN ENVELOPES AS THE PRINTER.  CAN SOMEONE HELP ME?  NOT ONLY AM I UNHAPPY WITH VISTA, BUT THIS DELL (1 YEAR OLD) IT CAME WITH.  WINDOWS 7 IS NOT FEASIBLE NOW.

  HELP PLEASE!

  Than 5700 is a serial number of the printer, NOT the printer model number.

  http://h20180.www2.HP.com/apps/lookup?h_lang=en&h_cc=us&cc=us&h_page=hpcom&lang=en&h_client=S-A-R163-1&h_pagetype=s-002&h_query=HP+5700+DeskJet&submit.x=10&submit.y=4

  Choose your printer, the OS and drivers model number, if any, at the link above.

  http://h20180.www2.HP.com/apps/lookup?h_lang=en&h_cc=us&cc=us&h_page=hpcom&lang=en&h_client=S-A-R163-1&h_pagetype=s-001&h_query=HP+5700+DeskJet&submit.x=4&submit.y=5

  Choose your model and the installation instructions.

  For any problem, contact HP:

  http://welcome.HP.com/country/us/en/contact_us.html

  See you soon.

  Mick Murphy - Microsoft partner

• microphone works only on Dell Inspiron 1525.

  MIC not working not not on our Dell Inspiron 1525.
  It used to work fine until about 3 months - then perhaps some other software/driver, we installed prevents the entrance of mic work Sigmatel.

  I have re-installed the latest drivers Sigmatel Audio for Vista - 32 x, of the Dell Web site. Tried the external microphone and built-in microphone array. Neither one works. No idea what I need to do? Thank you!

  Katnrica

  Hello

  1. don't you make changes on the computer before this problem?
  2 do you have the card drivers installed on the computer at his last?

  Step 1: Run the fix it tool in the following article and check.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  Step 2: Check if the microphone is disabled.

  1. click on start > Control Panel > switch to Classic view > sound > recording tab
  2. right click in the empty space and select Show disabled devices > if the microphone is disabled enable it and click on the OK button. You can also try to select the microphone as the default device and check.

  See also:
  Connect one microphone, music player or other audio device to your computer
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

• Dell Inspiron 531 is not communicating with the Dell AIO 926 Photo printer.

  Dell Inspiron 531 is not communicating with the Dell AIO 926 Photo printer.  Maintains documents in the print queue and print them when the computer is restarted.  In addition, the computer does not recognize my Promaster digital converter when I plug it into a port.

  Hello

  Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you.

  Please answer the following questions that would help us provide a better solution.

  What version of Windows are you using?

  Try to follow the steps and check:

  Step 1:

  Visit the link following if you are using Windows 7.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  If you are using Windows Vista, see the steps mentioned in the link.

  http://Windows.Microsoft.com/is-is/Windows-Vista/troubleshoot-printer-problems

  Try the steps from the link following if you are using Windows XP.

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  Step 2:

  Try to activate the devices associated with the Dell printer and disable the rest by performing the clean boot, once done try to print.

  You can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. The following article explains how to solve problems in Windows Vista or Windows 7 by performing a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Put the normal computer as mentioned in step 7 of section.

  Step 3:

  About the issue with Promaster digital converter try to connect to another USB device or run the fixit and check:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Please feel free to respond if you have any other questions, we would be happy to help.

• Inspiron 1525 will not stop hibrinating

  When I turn on my laptop Dell Inspiron 1525 with Windows Vista it says he took over her windows, then the word Hibrinating... and a little spinning circle appear in the middle of the screen.  No matter what I do it won't stop rotating and I cannot get windows to do something more.  I tried to turn off the laptop and restart, but it does not help

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/d4fcdbbc-d084-48b1-a6a5-95ed18bf0719

  Please only post the same question once in these Forums.

  Another answer Thread.

  Mick Murphy - Microsoft partner

• All of a sudden, my dell inspiron 6000 does not connect to the internet and has an error message to see article 871122.

  New error message to see article 871122

  All of a sudden, my dell inspiron 6000 does not connect to the internet and has an error message to see article 871122. That's happened? I used it last night to check my email, and then I deleted some photos on the disk hard and this morning it will not connect. I don't really understand what happened to him because it was off last night.

  Hello

  1. you are using a wireless connection?

  If you are using a wireless connection, I suggest you to update the latest drivers for the network adapter and check if it helps:
  http://support.Microsoft.com/kb/283658

  Also check this link for troubleshooting steps:
  http://support.Microsoft.com/kb/314095

  It will be useful.

• Turn off the tap to click on Dell Inspiron 1525 with Windows Vista

  Can someone tell me how to disable "tap to click" on the touchpad of my laptop?

  I have a Dell Inspiron 1525, running Windows Vista.  It's the standard touchpad I mind, it has not been upgraded.

  Other forums have suggested to go to the control panel > hardware and sound > mouse, but once I'm there, I only "buttons," "Pointers," "Pointer Options" and "hardware".  There is no option to disable "Tap to click" referred to one of them.

  I've updated all the drivers - Windows tells me I have the latest version, if this doesn't fix the problem.

  My hands are too big to type without hitting the touchpad!  So frustrating.  I accidentally moved my slider three times during the composition of this post.  Someone help me please!  That's four times now.

  I thought about it!

  Under computer > C: > drivers > entry > R176423, I ran DPInst.  He installed the Dell Touchpad option in my taskbar to bottom left.  After the reboot, I was able to open a more in-depth version of my touchpad, where I could uncheck "Tap to click".  _ Yes!

  Thanks for all your help, man.  I really appreciate it.  It's really a positive manifestation of the human condition when the volunteers their expertise selflessly to help others.  Keep up the good work, and I hope that this thread will stay up to help someone else in the future.

  Dell Inspiron 1525

  Touchpad

  Turn off the tap to click

  Windows Vista

  R176423

• Windows Vista SP2 won't finish loading on Dell Inspiron 1525

  I have a Dell Inspiron 1525 with Vista Home edition.  I'm trying to load Vista Service pack 2 and crosses all the way to the end when he says "Update failed to return to the previous version".  Why is he not fill?  I completely uninstalled the antivirus and tried the update with only Microsoft services working in my MSCONFIG.  I have the latest version of the Bios Dell and don't know what else to try.  Any help would be appreciated.

  How to troubleshoot the installation of the service pack, Windows Vista and Windows Server 2008 problems http://support.microsoft.com/kb/947366

  Maybe manually downlaod SP2 and install

  http://Windows.Microsoft.com/en-GB/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  See the link above for the download and instructions etc.

• Dell Inspiron 1525 with Vista Home Version gets stuck and won't end up task - is to turn it off and restart.

  I have a Dell Inspiron 1525 with Vista Home Version that was working fine until recently. Now, whenever I try to open a file or use whatever it is, it seems stuck with the ROAR - once an hourglass on the old computer - and nothing happens. The only way I can get out of everything I tried to do is to turn off and restart. Next, I get the message that he has was not shut down normally, etc., and it takes forever to get up. Then the whole again. I really want to this time just download all my files on an external hard drive so I can get a new computer, but it will not let me even copy / paste a single file without getting bogged down. Control Alt Delete even let me get into the Task Manager to stop the programme of work. Please help me.

  Hi MZ1_6789,

  ·         What is the exact error message?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link to return the computer to a Normal startupmode.

  Method 2: Follow the steps in the article.

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  Make sure that all windows updates are installed.

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  Reference: http://windows.microsoft.com/en-US/windows-vista/Ways-to-improve-your-computers-performance

• CD of Dell Inspiron 1525 player makes grinding noise

  I have a Dell Inspiron 1525, I can get ot the drive to read or write a CD he has a strange noise that stops and starts, but not spin the grinding disc. I got no error message, just nothing happens?

  Cannot get my driver t read or write CDs

  It can be broken.

  Normally, they do not have a "Squeak" when using.

  If the info below AED do not work, contact Dell:

  http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner