Dell Inspiron 1564 plugged in, does not support

Someone knows something about the Dell Inspiron 1564 which does not load when it's plugged in?


Moved from Hotmail

Hello

What operating system is installed on the laptop?

I suggest you check the connections, connect it correctly or contact Dell also refer to this link.

If you have a spare power adapter only to login and check.

I suggest you to refer to the articles and check if it helps:

Solutions to common battery problems

http://Windows.Microsoft.com/en-in/Windows7/solutions-to-common-battery-problems

Taking care of your laptop battery

http://Windows.Microsoft.com/en-in/Windows7/taking-care-of-your-laptop-battery

It will be useful.

Tags: Windows

Similar Questions

  • XPS 13 9350, "plugged in, does not support".

    New machine, the first time I started it up I got this warning message:

    Product name: XPS 13 9350
    System BIOS 1.0.0
    Service etiquette: xxxxxxx
    ePSA: Build 4302.10 UEFI ROM
    The attention! Power adapter AC power and the type cannot be determined. The battery may not charge. The system will adjust the performance to match the power available.
    Note: This warning can be disabled in the BIOS Setup.

    I don't worry for a couple of days, but when I plugged in the power adapter, the battery status said "battery level of 48% (plugged in, does not support).

    In the settings of the BIOS under General battery information, he showed "AC adapter / CC = unknown" under System Logs, events of the BIOS, he showed: DateTime "alert!" Unknown sector adapter, can affect performance. »

    I clicked on the 'Diagnostic' button on the start page alert and Dell SupportAssist under "Battery and AC adapter" report shows "current adapter: 1 watt adapter, top: n/a, low: n/a.

    The little blue light on the plug of the adapter lights up.

    Many people have encountered similar problems with Dell laptops, but there only seems to be as well as workarounds and very few solutions. I have a very short time period in which to return the machine, and I'm not at all a type of material, so I'm not opening upward.

    Suggestions for solutions/FAST?

    Thank you
    Chris

    Rishi,

    Yes, I did and it works! The MS Store sent me one as well, but it was a 90 watts, not 45 adapter. It turns out that they don't have. They sent me a backup battery, which is nice. Find out what Amazon of the adapter I got:

    www.amazon.com/.../B00EM2V8AS; PSC = 1 & redirect = true & ref_ = oh_aui_detailpage_o00_s00

  • In Vista when I hover over the battery icon, it shows plugged in, does not support

    When I hover over the battery icon, it shows plugged in, does not support.  Why my battery not charging?

    Hi Retha_T,

    1. What is the brand and model of your laptop?

    2. when the problem started?

    3. did you of recent changes to the computer?

    You can read the following article and check if it helps to solve the problem:

    Solve battery problems

    Hope this information is useful.

  • Help, please. Screen touch dell inspiron 5559 HID-complaint does not work.

    Screen touch dell inspiron 5559 HID-complaint does not work. I have to keep this option disabled because all of a sudden he starts to feel the uncontrollable different key. Sometimes it works fine for a day, but it continues to be. I have restored the laptop to factory settings, but it did not work.  I checked the updates of drivers, but they are none.  Please help me with this. Thank you in advance.

    How do I calibrate my touch screen

    www.dell.com/.../EN

  • My battery stopped charging. For four days, the power button says "59% available (plugged in, does not support)."

    * Original title: charging the battery

    My battery stopped charging. For four days, the power button says "59% available (plugged in, does not support)."

    How can I get the computer to start the battery again?

    The battery is probably faulty. You can say as follows:

    1. Shut down Windows.
    2. Remove the battery.
    3. Wait an hour.
    4. The power supply is cold? If Yes, then the laptop consumes no power (which is normal).
    5. Insert the battery.
    6. Wait an hour.
    7. The power supply is hot? If so, the battery is recharged.
    8. Start normally and check the charge level. If she's still around 59% while the battery no longer accepts the full load. You need to replace it.
  • HP Envy TouchSmart 360 x: plugged in, does not support?

    Recently I used my laptop to play Fallout 3 for a fairly long period. Last night when I closed the game my battery indicator says plugged in, does not support. I tried to uninstall the control method compatible battery and reboot, but that did nothing. This is the second time that this happened to me, but the first time that the battery just started to load it again without doing me something for her, but this time, nothing works. I can't take out the battery and test anything, without the battery because I don't trust myself to disassemble my laptop because the battery is inside. When I use the HP Support Assistant to check the battery, it is said that it is ok and the battery indicator indicates that he is in charge, but about ten seconds later it stops to load and the auditor of battery indicates the battery status is unknown. Is there something wrong with my battery?

    @Are_Zee,

    Hello and thanks for the display on the HP support forums.  If you experience a problem when the battery is in fact showing ok and does not appear in the indicator so that you can do is try to do a system restore before the problem started to see if it's the software causing the problem.

    So you can try to perform a calibration of the battery.  Here is a link to help you with that.

    HP laptops - test and calibrate the battery (Windows 10)

    Please let me know how it goes.

    Thanks again for posting and have a great day.

  • Plugged in, does not support? 4% battery

    My mother has recently bought a new laptop Toshiba, running Windows 7 64 bit, and I just noticed today that is not supported. I turned on her laptop today and the battery said 3% so I stop it, plugged and turned, and then turn it back on. The battery read 4% (plugged in, does not support). I did not notice the do not load at first, until he was 4% for a very long time. Then I looked at power management and advanced settings and there is nothing about this problem. I turned off the laptop and the battery light has not yet come, and when I turn the charger on / off power to the outlet, the light load on the laptop turns on only for a second and then turns back off the coast. I took out the battery, put it back in and then plugged in and now he is in charge. But when I turn it on it stops to load again, what is happening here? I know that my laptop doesn't charge no problem, what I can do to solve this problem?

    Since this is a brand new machine, contact the place she bought, or Toshiba directly. No sense screwing around with it while it's still under warranty.
    It sounds more like a problem with the hardware than software, and if you do too much in how to disassemble things, they are likely to say you cancelled your warranty.

    SC Tom

  • receive battery WARNING on start up. the battery meter indicates "94% plugged in, does not support".

    When I turn on my laptop a battery warning message.  I checked the battery meter that says the following "94% plugged in, does not support".   The laptop is fine, so why should I get this message and what I would do to this topic?

    Any advice would be appreciated.

    Cheryl

    It is always recommended to run regularly only on battery power. It will actually make the battery last longer to let it discharge once a month. Realistically, if your laptop is on a desktop and plugged all the time, it is better to just remove the battery and only use it when you need portability.

  • HP Pavilion Notebook (laptop) plugged, G6 does not support.

    Hello

    I bought a laptop HP Pavilion G6 just a couple of months, and I had this problem since the beginning. I looked at some other forums and it seems that many people have had the same problem with the laptop is plugged in, but does not support.

    This problem is really frustrating, as the laptop is connected to the power source and in the laptop, but half the time it is not yet registered as being connected. The battery is discharged. Once or twice the battery completely exhausted (while it's plugged in) and then was charged 100% next time, it was shot on(???!!!).

    Could you tell me if there is some sort of programming or software failure, or if it could be a hardware failure. I have run the checker battery several times and each time he found no problems with it. As the laptop sometimes acknowledges that it is indeed connected (but does not load) personally, I think that it is not a problem with the AC adapter.

    PLEASE HELP ME!

    Thank you.

    (Sorry for the long message)

    Hello

    You can help us help you by displaying the following information.

    1. the complete model number and the laptop Nr - see web document this HPif you're not sure you how to locate the product number or model number.

    2. the full version and the name of the operating system you use (IE Windows 7 64-bit).

    Go to Device Manager. (type device in the search programs and files and click on Device Manager, as shown in the following image)

    Expand the device of Batteries.

    Right-click on the compatible Microsoft ACPI control method battery and select uninstall.

    Do the same with the device adapter Microsoft.

    After uninstalling the devices, then you can right-click on one of the devices in the Device Manager and select and click on check for material changes.  When you have done this, the operating system will reinstall drivers for the devices.

  • Battery - plugged in, does not support

    Hey,.

    I bought my laptop 13, 14 months ago...

    At the beginning, it appears 'Low battery' on the 15%, then new attention to 10%, then it turns off automatically.

    But since the past 10 years, 15 days my laptop charging time decreases every day...

    I noticed, 10,12 days ago, it was usually stops at 25% without showing any message "battery low"...

    After a few days, it starts to stop 40% without warning, and then again after a few days it starts to stop at 60%...

    (Originally my laptop take until 01:30 hours for 100% charging, but after getting in this situation, my load time is also reduced, as when it was stop at 40%, when I plug in, it will load entirely whitin half an hour and at 60%, charge time is more diminished and get completely loaded only in 15, 20 minutes..)

    But nowadays, laptop turns on only when I plug (and showing, hip, does not support) and down I took out. I checked by removing the battery and connect the charger, laptop works very well and can easily log on windows without battery...

    Someone please, detect and specify the problem and kindly let me know the Solution.

    Thank you HP...!

    Computer laptop specifications:


    Battery information:

    Well you could go on eBay and ask for part number hp or order it from hp.

    It's easy just take your battery and search search for model number on eBay but if ur stuck ask hp.

  • Re: Satellite A500 (PSAR9E) battery - plugged in, does not support

    Yesterday, I noticed that my battery is at 74% - plugged in but not charging. Laptop not working ok, no problem.
    Before this problem occurred, I started it upward, he worked for 10 minutes on the battery without connected charger.

    Then it just stops what it self. I thought that maybe the battery was low so I plugged it on. After a while, I noticed that it does not load, I have it plugged into power-it shuts down as there is no current battery. Tried to remove the battery, plugged into the cable from the Jack, put back them, the battery cable, it starts and still nothing... Today it of about 72% and still does not support... Laptop is 2 years old. Battery has been working great until now.

    Please help if you know the solution, thank you!

    What to say?

    Start the laptop without battery and when the windows are fully charged put the battery in place.
    I imagine that the battery will be recognized correctly. Is the same situation when this happens?

    It will be interesting to know how it works with a new battery. At the moment, we can say more about it. The problem is battery or maybe electronic power?

    It is not easy to say what the problem is here.

  • Dell inspiron 531 BIOS Flash does not work in Windows 7

    updated my dell for win7 64 (from vista 32) but now dell BIOS flash not work

    Tried to run in compatibility mode, but seems no good either. It only extracts has winflash.sys of the file and do nothing more than that.

    Dell does not support this model with win 7 then you are my last hope :)

    Nothing says that you need Flash/upgrade the BIOS updated? Updated your BIOS is usually not necessary unless the update fixes a problem that you are experiencing.

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

  • Dell Inspiron 7537 wireless connectivity does not

    Hi all

    I bought Dell inspiron 7537 and I am facing a problem of wireless connectivity since I've updated its build-in windows 8 to 8.1. Will not connect wifi or Bluetooth. I also tried to plug a device external wifi but it dint work. Even I've updated to windows 10 and eventually I reinstalled Windows 8 and Windows 7 but still the wifi adapter does not work.
    I installed the drivers a lot but this question is never resolved.

    I find a cross mark on my network icon to the right of the taskbar, and it says not connected to any network.

    Please help me with this issue I am unable to use the wifi even in this brand new machine.

    Thank you.

    Thank you very much for your reply, I installed Windows 7 on this computer. Now wifi is enabled :), but I'll try your suggested solution for Windows 8 and Windows 10

  • Dell Inspiron N5110 CPU fan does not work

    Hello world

    I have a problem with a DELL Inspiron N5110.

    When I turn on the laptop, the fan runs for 15 seconds then it turns off by itself... but the Windows starts correctly, and other components work fine.

    I know that I can't use my laptop if the CPU fan does not work because it will overheat the cpu and the motherboard so...

    Could you please give me an advice?

    Thank you

    The fan will run at powerup self test time, and then won't turn on (or run at full speed) up to a set temperature is reached.

    Function that replaces the motherboard, check that the thermal pads have been replaced when the radiator has been removed from the system.  If this part was not replaced, the system will run very hot.

  • (Redirected) The DELL INSPIRON N5110 processor fan does not work

    Hello

    I encountered a real problem with the fan to the processor in my laptop, it does not work, and when I run the diagnostic tests, I get this:

    error code: 2000-0511

    MSG: the preocessorfan did not properly.

    have you encountered the same problem?

    What can I do in this case?

    Thanks in advance

    Best regards

    As you have a laptop, better make this laptop in the computer Forum post here:

    http://en.community.Dell.com/support-forums/laptop/default.aspx

    Bev.

Maybe you are looking for

  • early 2009 macbook bluetooth driver for win10

    Any idea on what kind of Bluetooth dongle/interface, we have in the beginning of 2009 2Gz white MacBook Core Duo?   I had to get a new HD for my aging MacBook so I decided to do a clean reinstall of OS X El Capitan and win10. 1: first of all, did a c

  • Satellite A305-S6855 - question to reinstall Windows

    So I have a Toshiba Satellite A305-S6855 with Vista home premium. Have 2 cd I did a reinstall on it years ago, but don't remember when I do, do I need a key series or smth for windows, or I must only put the discs and wait. Because I kind of recall,

  • Send variables in macromedia flash

    Hello I would like to send a variable in macromedia flash. I explain my problem. I created a flash in which I send a word in a variable called lol and I read this varibale in another variable called say. But in labview I don't know how I can send thi

  • BlackBerry Smartphones cf39 9nh

    Hi, I got a blackberry torch 9860 for Christmas. while checking the apps, I some how put my ringtones on (all alerts off the coast) and now I can't get out. can someone help me to get back to normal? any help would be welcome. Thank you very much.

  • Photoshop CS5.1 will work with el capitan

    Photoshop CS5.1 will work with el capitan