Dell Inspiron 3043 All in One-2nd monitor?

Similar Questions

• Dell XPS 2710 all-in-One will not start, the totally blank screen

  Hello. This is my first post on the forums and I hope someone can help me.

  The Dell XPS 2710 all-in-one I bought for my 10 year old 15 months ago (Yes, that means that the guarantee is expired) will not start. No no post, no beeps, nothing. Just a brief spark of light on the screen, no words, nothing. The machine gets occasional use, and there is nothing to indicate what could have caused the problem. I have not upgraded the BIOS recently, is not as if it was a bad BIOS update, or whatever it is. I tried to hit the F1, F2, F12 keys delete during startup. No results.

  The video works. I know because I can connect my laptop to the HDMI-in port and I can see the desktop of my laptop very well. So the question is NOT the video. My son uses this machine for occasional movies and homework in his room. I want to fix the computer, if I can. I am handy with computers and built several machines from the outset in the past.

  I believe that the most likely scenario is that the motherboard has went wrong; There are several posts around the internet about motherboards 2710 AIO being unreliable. I saw an ad on the forums of Dell from a guy who said Dell Tech Support replaced its motherboard 2710 five times. I see that some of these motherboards are selling on eBay for around $200. I'm toying with the idea of getting a. I watched the service manual for the 2710 and I'm pretty confident that I could replace the Board of Directors.

  Someone had experience with permutation on their motherboard on a 2710 AIO? Or someone has any ideas on what could be the problem with my son's computer? I appreciate all the advice/help anyone could offer.

  OK, I have removed all the RAM from the motherboard (there were two sticks) and unplug the connector on the SATA hard drive. Then I turned on the machine and got two beeps very strong, but still no video on the screen indicating any form of activity of the POST. The sound signals have been first sounds I've ever heard during the procedure of boot on this machine. I put the RAM back in and re-connected the SATA cable. The way he has been, no video, no post, no beeps. I'm a bit at a loss for what I've decided, this means that the motherboard works technically and that another device on the machine is at the origin of the problem? Have I reason to assume that if I hear two beeps, then I should have the certainty that the motherboard was bad? Given that this a sound signal, the solution becomes cloudy, I guess. I can't help but feel that somehow the BIOS on the computer is damaged. Don't quite know how that could happen, however, because I have not updated the BIOS in over a year. I don't remember what BIOS version I have, but he had been working well for a year with no problems. Thanks for any other help/suggestions you can provide.

• How to get the Dell 944 Photo all-in-one printer driver to work

  I just bought the Inspiron 580 and am trying to use my existing printer (Dell Photo All in One 944) how to download correct driver for the printer to work with the new computer?

  S Pipkens,

  First run delete print jobs to remove all print jobs stuck in the queue.

  Unplug the printer.

  Download and run the patch (utility cleaning printer) untip it prompts you to restart your computer.

  Restart your computer. Make sure that the printer has been deleted. Driver Manual printer removal

  Download and install the proper drivers from...

  Reference Dell 944 all-in-One Printer owners thread (W7) (Patch is also located here)

  Firewalls and anti-virus programs will block communications.

  Rick

• HP envy 23-c110xt all-in-one: mulitple monitor set up

  I have a hp envy all-in-one computer... is possible to add another monitor... If this is how... I have an emachine monitor

  Hey @camcord2,

  Welcome to the forums of HP.

  I understand that you are looking for information on the connection of a secondary screen to your CRAVING 23-c110tx all-in-One PC. According to the specifications of the motherboard used in this model there is no video output port. There are third-party companies who manufacture USB adapters that can convert a USB to DVI, HDMI or VGA, but is not something of what HP specializes in the so I can't provide any information other than to let you know that they exist and could be worth looking at.

  Hope this helps to put you in the right direction.

• Reference Dell 922 Photo all-in-One Printer owners thread (W7)

  Please follow the instructions below and then tell me what is happening...

  Please make sure you have all the Windows updates, especially the .net framework (required to run many applications) and the last Java.

  Unplug your printer.

  Download and run this patch (a MUST for Vista machines) to completely remove the printer from your computer. Run the patch until it prompts you to restart your computer.

  If you use Windows 7 also try... Driver Manual printer removal

  Restart your computer.

  Download the correct drivers

  XP drivers

  Vista 32-bit drivers

  Vista 64-bit drivers

  All other drivers

  Install the appropriate drivers. You will be asked when connect you your printer (power on)

  To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

  If you use Windows 7, use the Vista drivers in compatibility mode.

  Right click on the file setup.exe, on the left, click Properties, compatibility of the left click. Replace the Vista compatibility (try Vista SP2). Then, install the appropriate drivers. You will be asked when connect (printer)

  To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

  In the digitization, if you have the disc that came with the printer, and then insert the floppy disk to the printer and keep it from running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

  Scanning

  Scan using the USB connection, open the Dell all-in-one Center, click on the scan and copy and scan from there.

  Scan wireless, use the buttons to scan on the printer.

  Rick

  jmlorey,

  You have disconnected the 922 printer.

  Uninstalled the printer. Also Manual Printer Driver Removal, and then restarted your computer, correct? Be sure to look at the instructions of Windows 7 for removal.

  Restart your computer after removing the drivers, is ensure that pilots have disappeared.

  64-bit or 32-bit operating system? Use the Vista drivers in compatibility mode. Start, Control Panel, system, it must be registered.

  You have downloaded the Vista drivers from the first thread and then tried to install the Vista drivers in compatibility mode, correct?

  Rick

• Reference Dell 966 Photo all-in-One Printer owners thread (W7)

  Please follow the instructions below and then tell me what happens.

  First of all, let us make sure that your computer has the latest Windows updates, especially of .net framework, necessary to run many applications and the latest Java.

  I recommend that you use these settings to the recommended wireless router for better communications.

  Unplug your printer. Download and run this patch to completely remove the printer from your computer. Run the fix, a MUST on Vista machines, until it prompts you to restart your computer.

  If you use Windows 7 also try... Driver Manual printer removal

  Restart your computer.

  Download the correct drivers.

  XP drivers

  Vista 32-bit drivers

  64-bit drivers

  All other drivers

  Install the appropriate drivers. You will be asked when connect you your printer (power on)

  To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

  If you use Windows 7, use the Vista drivers in compatibility mode.

  Right click on the file setup.exe, on the left, click Properties, compatibility of the left click. Replace the Vista compatibility (try Vista SP2). Then, install the appropriate drivers. You will be asked when connect (printer)

  To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

  In the digitization, if you have the disc that came with the printer, and then insert the floppy disk to the printer and keep it from running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

  Scanning

  Scan using the USB connection, open the Dell all-in-one Center, click on the scan and copy and scan from there.

  Scan wireless, use the buttons to scan on the printer.

  Rick

  Reformatting the hard drive and reinstall windows 7 has done the trick. This really delete all the driver files! With a clean machine, I was able to install the printer without problem in Vista SP2 compatibility mode. Not only so, but the other two Windows 7 PCs on my network domestic also saw the printer and installed it.

  It seems that the uninstall utility doesn't work unless you install the drivers correctly. If, as many of us have done, the drivers are installed without using the compatibility mode there are some files that get somewhere the uninstall program cannot reach. I just checked the section of drivers from the support page and can find no reference to installation in compatibility mode, the Council States that it is compatible and install the Vista driver. Always if Dell puts in place all the information, it should would probably be no need for forums like this.

  Just a pity that it took a format and reinstallation of the entire system to operate. Live and learn

  see you soon

• Reference Dell V 313 all-in-One Printer

  Recently, our 313 of V Dell all-in-One printer will print only an execution of an order given... the number of pages is irrelevant. Next time when I want to print, the printer icon small appears on the lower lip, the graph bar showing the beginning of printing appears, just at the top, and the printer sounds as if it starts to print, but only a couple of "grants", then a pause, then the printer stops, with the icon and the bar graph disappears from the display.

  The only way to get the printer to print the following command is to close all files, the printer and restart the computer. As soon as the computer has been restarted, and the printer turned on, without any other order, the printer starts printing the desired item.

  I uninstalled the drivers from Dell and downloaded the drivers from Dell official website of Dell, to see if this action makes a difference. I don't have.

  I'd appreciate deeply any suggestions on how I can adjust our PC to eliminate this mysterious hang up. Thank you.

  Porzel

  The system Dell printer is not compatible with Internet Explorer 11. Uninstall the present and go back to IE 10 and everything will be resolved. Is not ideal, but I hope that Dell of MS will come up with a better solution.

• Inspiron 23 "all-in-one monitor

  read a comment that the screen of the monitor on the aio 23 "is very reflective.  no further complaints on screen?

  Hi Szigy,

  I answer on an all in an Inspiron 23 "now. It is a reflection of what some because it's a glass screen and it is a touch screen. I have no problem with the reflectivity and I wear glasses. I have no complaint on the screen. If you have any other questions, feel free to ask me questions.

• Inspiron 2330 all-in-one, white screen on startup after Dell Logo

  Hello

  I just bought an Inspiron One 2330 with Windows 8 this week which was working fine until today.

  When I go to it starts, I get the Dell logo and Windows 8 points floating around in a circle below. When these disappear after five or six seconds, as often happens with the boot process, nothing happens. It allows access to the screen of Windows 8 with time and this landscape of space-age thing, but now I get nothing, just a blank screen.

  Please could someone help? Everyone knows this?

  Thank you

  Hywel

  I thought that I will answer my own post because I have not managed to solve this problem after the effort of several hours.

  I managed to enter the automatic repair of Windows by following these steps. After ignition, the Dell logo appears then the swirling circle. Is immediately turned off by pressing the power button until it stops. Repeat 2 times more, how the computer would decide that Windows fails to start, so it should start the auto repair.

  The automatic repair feature spotted that there was a problem with the video driver (as I suspected) and disabled. I could then restart normally and use system restore to return to a game without the danger of drivers, before I was running Windows Update.

• Inspiron 5000 all-in-one question

  I just got an Inspiron 5000 23 series (5348) and was shocked to see that the top of the screen has an open space of half inch! I looked at photos online and don't see this 'feature '. This will allow all sorts of dust and dirt to go directly to the computer. What I need to know is this. That's how the system was designed and built intentionally or is this faulty system? I don't see how I can keep this system if that's the way it is supposed to be.

  Contact Dell says that this is not normal. If you gently push the bezel all sides, they fit together and stay that way?

  Otherwise ask another replacement as soon as POSSIBLE.

  Good luck. Hope that they solve this problem quickly.

• Error cartridge on the Dell 946 printer all in one

  I get an error "cartridge #1203" and I can't understand what it is.  I replaced the cartridges, restarted the printer, tried new cartridges, etc... and I don't know what means this error.  any ideas?

  Error 1203 is an interesting error code. Here's what I discovered on error 1203

  It is average your cartridges of overflow of nine cartridges after a several impressions or all after you filled cartridges. Check to see if the ink are smeared on the holder where the contact panel with the cartridge. I have the same problem which I think lexmark has a problem and forget.

  Solution:
  I use the klennex with a few drops of water to moisten and cleanse back them on my printer work and support.
  The charging of ink work very well if you let it sit 24 hours. Then before you print anything, you must run aligned the cartridges once or twice then run once or twice cleaning cartridges.
  Print the test page to see how it's look and the way you're going.
  Be sure to not leave the debris of the klennex on the door panel.

  To reset the error code, unplug the power cord to the wall. Also remove the power brick to the back of the printer for 60 seconds. Then connect everything again.

  Dell series 5 ink cartridges have a sensor to them that cannot be reset. Article on Dell ink cartridges filling .

  Dell series 5 ink cartridges can be purchased at Staples, Wal-Mart or any Dell website.

  Rick

• My Dell 926 printer all-in-one does not print in Vista

  I can't print my printer.... only the last page impressions and stops?

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  http://support.Dell.com/support/downloads/DriversList.aspx?c=US&l=en&s=GEN&ServiceTag=&SystemID=PRN_ALL_A926&OS=WLH&OSL=en&CATID=&impid=

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Dell Inspiron 660 - all new drivers for win with OS 8.1

  Hello

  I just upgraded to OS Win 8.1 (Pro).

  I downloaded and installed new drivers for win 8 (Pro) last year.

  Are the drivers for win 8 to Win 8.1 PC?

  Can I know if Dell is going to come up with new drivers for win 8.1?

  Thank you

  Hi SengKuang,

  8.1 Windows drivers are available on the support site. Please click the link below and update the appropriate drivers for your computer.

  http://Dell.to/HENKQg

  Return for other queries.

• Automatic start after power outage - Inspiron 20 all-in-one

  I cannot find a setting of auto-start after power failure in BIOS, Inspiron 20. I really hope that I missed or can we make it happen another way. Someone at - it something?

  Thank you!

  Control Panel, system, advanced system, the boot parameters. But this isn't for the system failure power failure. Sorry - I read your post too fast.

  I don't think that today's computers can auto start after power cuts and even if it is possible, it is not recommended. Buy a battery backup UPS as APC must prevent interruptions of power failure and give yourself the time to shutdown properly.

• Inspiron 2305 All In One unit

  Has anyone tried to modify the active field for this model?

  I talk with 3 different technicians of Dell and each solution, they gave me has failed. A tech met with his supervisor, and they said the motherboard was bad. I tried the asset.com on a new utility in the cabin and received the same "active/serial number is not supported on this model.

  Dell support has really need to deepen and their solutions of test before they offer a solution.

  -Marcos

  I worked with a higher level of Dell tech who worked with its engineers. They were able to find/create a utility that works on the 2305 s active AIO. If anyone is looking for it, I can pass it on. Otherwise, raise, raise, raise to your Dell representative to get the results.