Dell Inspiron 3520 - hard drive failure - how to install Windows 8 on the new hard drive
I bought Dell Inspiron 3520. My hard drive has stopped working completely. It was stated as dead hard drive by diagonstic center.
I have now bought a new hard drive but have lost data and windows 8 preload on the original hard drive. Dell did not provide any recovery disk for Windows 8 pre-loaded on portable hard drive. How can I then install windows 8 / 10 on my new hard drive?
The .iso image file official 10565 has only:
- Overview of the House of insiders
- Overview of the Insider Pro
Unfortunately, there are 5 editions of Windows 10 and so 3 are missing. If your key is not automatically entered and accepted, it's probably a simple language edition or edition N.
When Microsoft release 10586 - TH2 - 1511 Version they will probably have an .iso that contains all 5 editions in 1 .iso or alternatively 5 .isos distinct (I hope as the first case that it will make Windows installation much easier).
Tags: Dell Drives
I changed the old hard drive (500 GB) with a new hard dirve (1 Tera) and now I have two problems:-
1. how to install Windows 7 on a new hard drive?
2. my laptop came preinstalled Windows 7 Pro, but all the DVD kit (disk reclaimer Application & discs) + Revocer operating system, which has been provided (by Lenovo) for the laptop is in the Windows 8 Pro. So, how to install Windows 7 Pro, my laptop while all the DVD sets are in Windows 8 Pro?
either way, this is my laptop spec (for reference); -
* Note *.
I intend to install Windows 7 Pro on my new hard drive using another DVD of Windows 7 (not DVD provided by Lenovo), but how do all Leveno program located in the disk 'Application & recuperator readers' (by example; - Lenovo system health and Diagnostics, Lenovo Power Control, Lenovo Fingerprint Reader) to install this hard drive? (as I told you before, all the DVD kit is at or only for Windows 8 Pro)
I hope someone will help me answer my question,
I found the solution.
Response to question 1; using a recovery & backup software to clone my current operating system, and then transfer them to my new hard drive.
Response to question 2; Download all drivers and software (all the application that located on the DVD of the kit I have) on the official website of Lenovo.
or another solution, send to a computer service shop and let the experts (workers) install it for me (the most simple and sure way).
HI: my name is greg, my brother recently bought a used computer to replace the one he had, which crashed. Itrdidnt have a hard drive in it, so he put an in, he had then loaded the windows xp for the computer crashed, but after that, it could not authenticate the computer only it Noah has can you help me thank you so much Greg
How to activate XP:
You can move the windows on a new computer
If it's a full license or upgrade retail - Yes. You can move it to another computer as long as it is installed on a single computer at a time (and if it's a Windows 7 Upgrade version the new computer must have its own license of qualification). The previous Windows installation on your old computer must be formatted or deleted. You will have to perhaps call Microsoft and explain what happened to complete activation. Turning it on the second computer will automatically be in effect 'disable' the license for the first computer.
If it's an OEM license - don't. OEM licenses, including Windows preinstalled on a computer before purchase and Windows purchased separately, are related to the first computer, they are installed on and cannot be transferred to another computer. To install Windows on another computer, you will need to buy another copy.
I bought a 12-p157d Pavilion. I need Windows 7 because two of the programs I need to run do not run on Windows 8.
After several futile attempts to replace the Windows 8 operating system, I bought and installed a new hard drive. Still, the system refuses to boot from my CD. He pointed out: "boot image selected didn't Authentice. Press
to continue. »
Pressing enter turns off the computer.
Boot disk works fine in this computer and the old Pentium 4 Tower.
Try the following.
Judgment of the laptop.
Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Bios Menu ( f10 ).
Under the System Configuration tab, expand the Boot Options Menu.
You must set the Secure Boot to disabled and legacy devices on " Enabled".
When you're finished, press f10 and select this option to Save the changes.
You will then need to enter a PIN of 4 numbers displayed on the screen to confirm the changes to the settings - enter the code and press ENTER.
Insert the Windows 7 installation disc and the laptop shutdown .
Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Boot Options Menu ( f9 ).
Use the arrow keys to select the CDROM option (uefi) and press ENTER - if you are prompted to "Press any key to continue...". "- make.
DP - K
* Original title: windows 7 download
I have a laptop dell M4400 with windows 7 pro OA. HARD drive crashed and I replaced with a new one. How to put Windows 7 on the new hard drive without boot cd? How will I know if 32 or 64 bits? This computer yourself running windows 10?
It has probably comes with Windows 7 Professional 64 bit.
You can download a copy of Windows 7 Professional using the following instructions (update of Microsoft recovery software supports downloads with the COA key):
Make sure you scroll down and read the section:
What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?
You can also use Windows 10 too as you have the right to it as a free upgrade:
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
Wow for on 1 computer install 2 operating systems with 2 hd
I have 2 hard drives; We have Windows XP and the new one is empty (empty) installed on a computer. I would like to install Windows 7 on the new hard drive. How can I install Windows 7 onto the new drive while keeping Windows XP on the old drive?
HelloSound pretty simple you just need to start from the disc and choose the 2nd hard drive during the installation of windows 7your xp will remain such what. every time that you start the system it will ask you to choose which operating system you needStart with.thanx.
Original title: Stop error 0x0000008e error displayed after trying to install Windows XP on the new drive
STOP 0x0000008e error. Also setupdd.sys - address F740DFEA base at F73EC000, Datestamp41107c8f. After trying to install Windows XP on a new hard drive. Never been in the BIOS. A bit afraid to change much, but it is said that the caching and shadowing should be turned off and boot into Safe Mode, but I cannot get Safe Mode because there is no OS on the drive. Also, he wants to know if I want to install Windows XP to a partition on the disk. I looked at other readers, and there is a partition, so I think I should. Any information would be appreciated. "Just an old fart."
See the following article: error message "STOP 0x0000008e" during the installation of Windows XP
How to install windows xp on the computer on which windows me
- Please see: Clean install Windows XP
I bought a new pc, how to install Adobe cc to the new Pc
If you have installed it on an old PC, then repeat the same process for the new machine.
Cloud creation help / sign out, sign in | Creative office cloud app
Cloud creation help / install, update or uninstall applications
Install creative Cloud applications
I have an Alienware 2015 15 which does not come with a CD player. I install a new hard drive (SSD 2280 m2), so the question is how to install WIndows 7.
While Microsoft offers an OS IOS for WIndows 8 download that you can put on a USB (with dell, I think that it automatically pulls the product key of BONE off the coast of the motherboard?) this IOS download is not available for Windows 7.
So the question is the recovery USB OS offered by dell will allow me to do a fresh install of Windows 7 on a new hard drive in the laptop even USB from recovery of the BONES came with. My last resort is to buy a new copy of windows 7 and a USB external CD/DVD drive.
TLDR: OS Recovery USB offered by dell will install Windows 7 on a new hard drive.
The factory restore USB will work on another drive. I did this procedure with the media created from the latest version of Dell backup and restore on my Inspiron 13 7347 and demonstrated the creation of media and installation on a new SSD:
Since you are using use Alienware Alienware Respawn. Alienware respawn is very similar to Dell backup and restore.
I have a problem with my Satellite A200 - 20 c. I want to install Windows XP Home edition, and I can't find the drivers on the hard drive. Where can I find it? How to install Windows XP Home edition? Could someone help me?
I see that you didn t read some messages in the forum here. There were so many threads on your problem created and discussed. You only need to use the search function "Search Forum Boards" and type something like "A200 WinXP" or "WinXP Sata" and you'll get more then enough threads/posts where your problem was already discussed and resolved.
Hope yoúll find what you need.
This is my first post here. I think I need a new hard drive for my a6130n HP install Windows XP.
When I tried to install Windows XP on the drive – which had Vista - I kept getting several error messages whenever I tried. Once or twice I was told to press a button if I was going to enter additional drivers out of a CD. Then I learned all my space partition was used, so I thought that my hard drive was dead.
I installed XP on Dells before and it was pretty simple - and never asked me if I had to add drivers. So, I wonder, if indeed, my current hard drive is dead, can I 'just' put in a new HD Sata, get ready to go on a CD disc or memory - a6130n HP drivers and load Windows XP?
Or should I find and buy a new hard drive with XP already and the drivers loaded and not try to do it myself?
Thanks in advance.
Thanks for all your help!
I'll try that... once more! With a new/good HD!
I need to know how to install the Windows 7 Home premium OEM version from the installation disc. I didn't know when I bought it on EBay, it is a generator system copy. I need to access the custom option to reinstall the full version of Home Premium on the ultimate version, which is not valid because I didn't know he could go only on a single computer. Anyway, if anyone could help me by allowing me to know where to find instructions on how to install Windows 7 Home Premium OEM version from the installation disc, I would be grateful. Or if you can send me the instructions, would be great.
Change the BIOS so that the DVD drive is the first boot device. Save the BIOS change (exit and save) then insert the DVD and follow the instuctions. Note: OEM media can perform an installation "Custom"and clean. "
Never be afraid to ask. This forum has some of the best people in the world to help.
How to install windows 10 usb?, model L50D-C
Might help u
How to use windows scan with my new canon MX 922 printer. It is conncected and copying and printing but can't seem to use the windows scan option, the cannon that which for me is slow thanks
All in one, type printers (print, copy, scan) usually have a very specific set of instructions during the installation. If not followed exactly the probability is that the scanner will not work.
Download and read the Setup instructions for your model, have you followed the instructions exactly, more precisely when to connect the printer / scanner during installation of the software process?
J W Stuart: http://www.pagestart.com
Maybe you are looking for
I teach online using Blackboard. Version of our College is not compatible with versions of Firefox beyond 3.6. At the same time, I have an html editor, which should at least Firefox 4.0 to run modules. Is it possible for me to have two different vers
My another Windows Vista machine has been slain on "if it please do not turn off or unplug your machine. Installation of update 1 of 17 "for 4 hours. I need to close because it's my phone and I travel NOW. How can I stop the update and close?
Hello I just bought a m202eg want to tilt 23 which included a USB DVB - T Tuner (AVerMedia A867) and a model of HP brand remote MCE Rothko (P/N 684258 - L31). The works of tuner as expected, but the remote has no effect at all, just blinks twice on e
Hello I have a few questions about the signing of BB1. is there a list of API signed? I mean 1 page with all the list signed API (no documentation)2. I really should I register my application if I only use open API?3. how to apply the signature? in J
work net printe works very well from the laptop I can't print from win 8 app (cards) to the network printer that works with the app not