Dell lost reference

Similar Questions

• Dell server reference

  Buongiorno,

  abbiamo ST UN server: G376KY1 con 3 door. Sopra ogni porta usually e accesa una lucina verde. Da yesterday, due sopra door, the lucina verde e ad where Reed arancione.

  By he restaurant non abbiamo altri if. Copy the ha effettuate senza if.

  Volevamo sapere di cosa if is is not e UN guasto oppure.

  Grazie, saluti

  Marilena

  Come scritto privatamente,

  who can find all the information by guasto he diagnosticare.

  www.Dell.com/.../en

  In particular Può utilizzare he Dell Diagnostics online by low una diagnostica brain sui

  www.dell.com/.../SLN292241

  Saluti

  Marco

• Dell 810 reference does not print

  Hello

  I know that similar topics were launched but suggestions to solve the problem do not work, so thought I would start my own.  I had to wipe my pc and so then reinstalled my printer using the disc.  According to the pc, the printer is all good to go but when I press print the icon appears, but then nothing happens and he disappears again.  Have updated the drivers, who have completely removed and reinstalled, you run the troubleshooter (no problem), have checked the port is USB, have tried printing from Notepad, did you check the spooler service is started (and stopped and he did it again) and when you restart the pc it always starts).  I'm completely out of ideas.  Can anyone help?  Thank you

  scrapper78,

  Try reinstalling the printer by following the instructions below.

  First run, delete print jobs to eliminate any print job stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal

  Download the 32-bit drivers for Windows 7, 8 and 8.1 32-bit Vista or 64-bit Vista for Windows 7 drivers, 8 and 8.1 64-bit. Install the Vista drivers in Vista compatibility mode, you will get a message, the printer is not connected. Connect the printer at the moment (power on).

  You will find links to the patch/drivers to...

  All-in-One printer, Dell 810 owners thread

  Don't forget the virus progrgrams and firewall will block communications.

  Rick

• Dell C6100 reference: Beginner complete

  Hello

  I was going to set up a cluster, using several desktop computers, when I came across the poweredge C6100 XS23-TY3.

  At first glance, this would be much cheaper with faster rendertimes (according to the scores of cinebench). But I don't know if all the hassle of catching a C6100 and running, worth it.

  While I'm a total newbie when it comes to cloud servers, I have several questions about the c6100.

  (1) when it comes to Windows OS, I guess I have to use Windows 2008 R2 or 2012? What is the best/most reliable option?

  (2) I guess I have to install Windows on each node?

  (3) and windows enough to make the C6100 upward and the race, or do I need other software as well?

  (4) as the C6100 has a sata controller, can I use an SSD instead of a SAS drive? And if so, is it also Plug'n play like in regular jobs or is it more than that?

  (5) if I have to install the software on each node, is possible at once, without access to each node separately? I am aware that there renderfarms, which consists of 3000 nodes or more. I can't imagine they have to the remote desktop of each node, in order to install a new plugin.

  (6) any known problems with the C6100?

  Thanks in advance!

  Hello

  Here is some useful information about the C6100: http://downloads.dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_cloud_products/poweredge-c6100_setup%20guide_en-us.pdf

  http://downloads.Dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_cloud_products/PowerEdge-c6100_owner%27s%20manual_en-us.PDF

  • 1. it supports Novell SUSE Linux Enterprise Server 11 x 64 SP2
    Red Hat Enterprise Linux
    Microsoft® Windows Server 2008 R2 Enterprise SP1 and HPC Server 2008 R2 x 64 SP1

  Citrix® XenServer
  VMware® ESXi

  2. Yes, you install an OS on all nodes.

  3. it will be functional with any operating system.

  4. are there available SAS RAID cards that will allow him to use SAS or SSD drives. You will need to create a RAID array.

  5. in general, a large like this environment using Vmware and you would deploy virtual computer images for all systems and can manage a single image.

• Dell P513w reference does not connect to a wi - fi connection

  I have a printer Dell P513w I can't join the wi - fi and I can not find the cable

  Hello

  Dell support team published an article based on the knowledge that explains how to connect the Dell P513w printer to a wireless network. Please visit this link and follow the steps.

  Kind regards.

• Dell T710 reference - was USC essential?

  One of my clients has a T710 server which works OK as a server but there are problems with the USC and this feature is not usable, unless I fix it. Some time & effort has already been spent on it, but before we go any further, I just wanted to confirm that USC is essential to the normal operation of the server - as far as I can see, this is a useful feature that did not have many other servers. Obviously the client don't want to spend money on getting a fixed non-essential feature.

  The server runs FreeBSD, so the usual Dell Linux & Windows tools are not usable - iDRAC6 that enterprise normally works well that stuck at version 1.11 as the failure of the attempts to update via the interface web iDRAC.

  Andy

  Hello Andy

  No, USC is not necessary. It is now referred to as the cycle of life or the LCC controller. Some also call the ECA for improved lifecycle controller.

  "LCC" is an operating system that runs on iDRAC. The two are interdependent, but the features "LCC" offers to the iDRAC are not required for the features.

  The old DRACs are controllers for remote access. IDRAC is also baseboard management controllers, so the old DRAC is not required for the feature. New iDRAC is little needed. If the iDRAC does not work then power systems and performance will be properly managed. It will take place at lower voltages and the speed of the fans higher to compensate. This will keep the system running at optimal performance.

  While the CDC is not necessary, looks that you are experiencing problems with both iDRAC, and which is necessary for maximum performance of the system. I recommend you all the issues with the iDRAC. In the process of fixing the iDRAC you will probably solve the problem with "LCC".

  Thank you

• I was going to get a dell u2713h reference

  I was going to get the dell u2713h but heard bad things about the material support of the calibration or lack of - I've also heard say that LG? model has an excellent monitor for photo editing - any help would be greatly appreciated - I'm a nubee but who want to do things well

  Thanks marty

  If you do not have recourse to an owner here, you can try this site:

  http://www.tftcentral.co.UK/reviews/dell_u2713h.htm

• Dell CCTK reference - password clear hard drive without prompting

  Hello

  I'm going to erase the password hard drive with the following command:

  CCTK - hddpwd = - valhddpwd = PASSWORD

  After restarting the client, I get a prompt if I change oder ignore the previous command.

  I need a solution to clear the password of HDD without being invited.

  Is there a solution?

  Thanks for any help.

  This is the current solution and requires manual checking at the moment.  We are in discussion with the teams of HARD drive to see if we can do it anonymously in a future release.

• I have a Dell Dimension 2400 running windows XP - SP3

  The green power light turns yellow and the computer shuts down.

  http://support.Dell.com/support/eDOCS/systems/dim2400/en/sm_en/index.htm

  Dell 2400 Reference Manual.

  http://support.Dell.com/support/eDOCS/systems/dim2400/en/sm_en/advtshoo.htm

  page with advanced Dell 2400 troubleshooting

  http://www.pctechbytes.com/Dell/Dell-power-button-lights/

  Describes power light stocks and colours.

• Unable to display fax and or fax. Running Dell check modem but no change. Suggestions please

  When sending the fax I get a message "no tone" I phoned the number and an active fax signal is there.

  Dell _ reference? (Model)

  Downloaded the latest driver for the hardware device for Windows XP of the Dells site for it?  Install them?

  Usually, you have two ports on these devices (phone and online) - you should have the "wall" line plugged into the line.  Then you can plug a phone into the "phone" to verify that it is passing by at least (if you pick up the phone, you should hear the tone).

  It is a (non-digital) analog telephone line?

  The modem has always been connected to a digital telephone line (coincidentally, etc.)?

• Hard drive Dell Inspiron 1426

  My hard drive died and I bought one on ebay. I have insalled it and inserted the disc of exploitation for windows vista. The error message that came was, "this disk is not bootable" or something like that...

  Does anyone know how to get the new hard drive to work? I am novice of the WADA. My computer is a Dell inspiron 1426.

  Maybe the person that I bought to take everything on it?

  Linda :)

  Hello

  To install Vista on the new disk, you must set the CD/DVD to start everything first and have the Vista Installation
  media.

  Parameters/settings (BIOS/CMOS) often F2 as you start then look at the screen - CD/DVD to start everything first - don't forget
  to replace hard drive later.

  Put in the DVD and boot on it and install Windows. If it boots that disc and then either the CD/DVD drive
  has a problem or the disc you are using is not the good Vista installation media.

  Check with Dell Support, their drivers and documentation online and ask in the Dell forums. Dell will reference
  installation instructions complete on their Web site.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  I hope this helps and happy holidays!
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Dell XPS 15 - flashing screen

  Hello!

  I have a Dell XPS 15 (Skylake) and I ve noticed that the screen flashes now and then.

  There is not all black, it s more like it decreases intensity / flashes for a second...

  I ve tried to restore the computer and installed the latest intel & drivers nvidia.

  Best regards

  I have a solution that worked for me. I downloaded the latest driver from NVidia. I googled NVidia driver and updated to the current one from October 23. 2016. I had to open internet explore do in order to be compatible with JAVA. DOES NOT WORK ON BOARD. use IE, or if you dl chrome or something.

  the screen has stopped flashing. I have the latest driver for dell BIOS reference as well.

  Now, my computer keeps restarting when I try to turn it off. so, it's new, but twinkle stopped.

• MXL DELL sees internal blades NIC 1 G No 10G

  Hello

  We have recently improved our network in case to MXL DELL M1000E switches, but the port speed to switch display for internal ports as 1 G 10 G not

  • NL - sw5 #sh status int.
  • Port Description status Vlan Duplex speed
  • Te 0/1 d5166 DELL up to 1000 Mbit full 65
  • Te 0/2 d5166 DELL up to 1000 Mbit full 65
  • Te 0/3 d5166 DELL up to 1000 Mbit full 65
  • Te 0/4 d5166 DELL up to 1000 Mbit full 65
  • Te 0/5 d5166 DELL up to 1000 Mbit full 65
  • Te 0/6 d5166 DELL up to 1000 Mbit full 65
  • Te 0/7 d5166 DELL up to 1000 Mbit full 65
  • Te 0/8 d5166 DELL up to 1000 Mbit full 65

  Version of the switch:

  Time operating system software real Dell

  Reference Dell operating system Version: 2.0

  Reference Dell Application Software Version: 9.5 (0.1)

  Copyright (c) 1999-2014 by Dell Inc. All rights reserved.

  Construction time: Thu Jul 31 21:20:08 2014

  Build Path: / sites/eqx/work/swbuild01_1/build01/E9-5-0/SW/SRC

  The availability of Dell Networking OS is 1 day (s), 15 hour (s), 58 minute (s)

  System image file is "system: / / has.

  System type: MXL-10/40GbE

  Control processor: MIPS RMI XLP with 2 GB (2147483648 bytes), carrots (s) 1.

  M 256 bytes of memory starting flash.

  2 34 - port GE/TE/FG (XL)

  10 GigabitEthernet/IEEE 802.3 interfaces 88

  4 forty GigabitEthernet/IEEE 802.3 interfaces

  Versions of FW M620 blade:

  Integrated Dell Remote Access Controller 2.21.21.21
  Intel(r) Ethernet 10 2 P X 520 - Ncdb - 15.0.28 k
  Intel(r) Ethernet 10 2 P X 520 - Ncdb - 15.0.28 k
  BIOS 2.5.2
  PERC H310 Mini 20.13.1 - 0002
  BP12G + 0:1 1.00
  Lifecycle controller 2.21.21.21
  Dell 64-Bit Diagnostics uEFI, 4247, 4247 version has 1, 4247A 1 4247.2
  Reference Dell OS Driver Pack, 15.07.07, A00 15.07.07
  1.1 BONE COLLECTOR, OSC_1.1, OSC_1.1 X 10-00
  System CPLD 1.0.7

  Please help change the speed of the port to 10G.

  Thank you.

  Kind regards

  Aytugan.

  Hello

  The problem has been resolved after market chassis package power

  Thanks, Josh

  Kind regards

  Aytugan.

• iTunes can't find my music library

  iTunes can't find the music files on my hard drive.  I use iTunes 12.3.3 on my iMac with OS X El Capitan 10.11.4.

  In iTunes, I can see my purchased music, but none of my synchronized CD.  In Finder/music/iTunes/iTunesMedia/music, all my music is there.  In fact, if I double click on a song, it opens iTunes and play that song.  After that, this song is available through iTunes.

  I tried restoring iTunes Library.itl in my time Machine from before the update to iTunes.  I also tried a Finder/music/iTunes/previous iTunes library restaurant.  None worked.

  Any ideas are appreciated.  Please provide as much detail as possible; I am not much less this.

  Thank you!

  iTunes is none of the files in the media folder, it relies on the file .itl having the correct inventory.  Gong return well enough with the .itl versions should provide you for awhile before iTunes lost references to media files, but of course, it will mean also any changes you have made since then will be forgotten.

• Satellite L500 - where to download acoustic silencer?

  For Christmas, my son got a Satellite L500 and use it for the moment to mount the CD on his iPOD. However, some and not all, CD vibrates terribly when the drive is on to say anything over 8 x, but also it can operate at 20 x and shut up. After reviewing various wires I see lost references to acoustic silencers of Toshiba and the ability to slow the disc may be the answer. However, I can't find acoustic quiet on the laptop and cannot find where you can download a copy of Toshiba.

  Any thoughts as to where I can find it on the new laptop and if not where can I download a copy legitimate. I say legitimate as there are a lot of references to download but from the websites of third parties and not of Toshiba.

  best wishes in advance.

  Hello

  Acoustic silencer was available for the old phone like for example the Satellite A100 series.
  But there is no acoustic muffler for the new series of laptop.

  But if you want you can try to install the acoustic silencer released for other series.
  I found an acoustic muffler for Vista 32 bit.
  But I'm not very good if you could install on Win 7 and L500 laptop m computer series

  You could check it out, but there is no assurance that it will work