Dell Media Direct 3.5 install and you want to create 4 partitions

Similar Questions

• Hard drive upgraded and you want to create a partition like HP for recovery

  I have improved my 250HD to a 750HD. To change this, I lost the HP supplied Recovery partition. How can I create something similar to how HP placed on the original hard drive? Is there away or solution to this?

  Thank you

  Anthony

  Well Yes, that's all... Looks like you had Windows vista to use preinstalled on this laptop...

  So if you want the recovery partition that comes with the laptop, you'll need HP Recovery disk, which you have to do when you get the laptop...

  If you use Windows 7, try the steps on this link... http://h30434.www3.HP.com/T5/notebook-operating-systems-and/custom-recovery-options/m-p/329260#M45230

• I first Pro CC and you want to create DVDs. I understand this need Ii Download Premiere Pro CS6 (with rappel) I find Premiere Pro CS6 in My creative Cloud window. BUT... it only allows me to install. He said "up to date". There is NO installation b

  I first Pro CC and you want to create DVDs. I understand this need Ii Download Premiere Pro CS6 (with rappel) I find Premiere Pro CS6 in My creative Cloud window. BUT... it only allows me to install. He said "up to date". There is NO button install. How to do it?

  Previous through Cloud http://helpx.adobe.com/creative-cloud/help/install-apps.html#previous

  - and if you have Cloud application manager 2015 https://forums.adobe.com/thread/1906752 of difference

  Instructions again, cloud or version https://forums.adobe.com/thread/1992717 serial number

  -a of notes on different versions of cloud and step by step on these differences

  -contains information about the separate library download which is necessary

• I first Pro CC and you want to create DVDs. How do I do that?

  I first Pro CC and you want to create DVDs. I understand this need Ii Download Premiere Pro CS6 (with rappel) I find Premiere Pro CS6 in My creative Cloud window. BUT... it only allows me to install. He said "up to date". There is NO button install. How to do it?

  Title edited by Kevin Monahan

  [Duplicate message deleted... post the same question more than once is confusing... MOD]

  [This is an open forum, not a direct line to Adobe support... you have to wait a response]

  This thread with unreleased track is in the forum again.

  I first Pro CC and you want to create DVDs. I understand this need Ii Download Premiere Pro CS6 (with rappel) I find Premiere Pro CS6 in My creative Cloud window. BUT... it only allows me to install. He said "up to date". There is NO installation b

• I have an old dell with a lot of questions and you want to wipe and start over as I just got this unpacking. Is this possible?

  I want to clean a computer and start as I just got it out of the box.  It's a dell that I got in 2002.  Any help?

  Thank you

  James

  Hello

  Call Dell and ask them to send you a set of XP Recovery discs that XP is the Windows operating system in 2002 and a CD that came with Dell computers at the time.

  You have lost your.

  To check the serial number of your computer to make sure that it is what you have installed.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

  Here is the Vista Forums.

  For more XP? problems please ask in the Forum Installation of XP at this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install?page=1&tab=all

  See you soon.

• I am buying a new computer without an operating system installed and you want to know if my Windows 7 Upgrade disk can be used to install Windows 7?

  I'll buy a kit of barebones without preinstalled operating system and was wondering if I could use my Windows 7 upgrade disk to install Windows on the new PC.

  Short answer 'NO '.

  Upgrade means upgrade. An upgrade can only be used to upgrade a previous version of XP or Vista. You will need to purchase a full retail or OEM version to install on a computer without an operating system.

• I already have InDesign and Bridge scripts start and you want to create a plugin for them using Extension Builder?

  Startup files are Javascript in the InDesign file, but file Bridge is converted to JavaScript binary file.

  I have installed Eclipse and Extension Builder. Then what?

  And this requires rewriting the code or just a short process of conversion?

  Thanks in advance.

  "The supported applications

  The following office applications Adobe supports the CEP and IPC e-mail monitor-based extensions. Versions of Creative Suite of products are supported only Flash-based extensions. Creative cloud releases are supported by HTML5/JavaScript extensions; the model Flash/ActionScript is

  disapproved, and support is removed:

  Host name for InDesign: IDSN

  Host of InCopy name: Clement POUPARD

  Hostname Illustrator: ILST

  Host name of Photoshop: PHXS

  Host name of prelude: LTIP

  Hostname first: Agency

  Host name of Dreamweaver: DRWV (for Flash extensions only)

  Name of the host Pro Flash: FLPR (HTML extensions only)

  "Hostname afterEffects: AEFT.

  Info:

  http://wwwimages.Adobe.com/content/dam/Adobe/en/DevNet/creativesuite/PDFs/CC14_Extension_S DK.pdf

• Whenever I start my computer it will go to Dell Media Direct and will not bring me to my profile

  Whenever I start my computer, it will go to Dell Media Direct and will not bring me to my profile. I will follow the direction it tells me to do, but it does not work.

  These are the directions that he told me to do

  1. Dell Media Direct output
  2. Press the power button

  Then when I do this

  1. It is said to be taken from the windows and dates back to Dell Media Direct

  http://support.Dell.com/

  Dell support at the link above.

  http://en.community.Dell.com/support-forums/default.aspx

  Dell's Support Forums at the link above.

  Try the Dell Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• If you bought a laptop and you want to install Windows 8 Professional, can install you it directly or you must have a base like Windows 7 Stater license?

  Original title: installation of Windows 8.

  If you bought a laptop and you want to install Windows 8 Professional, can install you it directly or you must have a base like Windows 7 Stater license?

  Hello

  The only FULL of Windows 8 Pro version would be the OEM System Builder... everything else is an upgrade...

  Unlike Win 7 and earlier versions, Microsoft is not offering one COMPLETE Win 8 other than OEM package...

  The difference is that the OEM version has no support from Microsoft... If you have a problem, you are on your own... Just enjoy the Forums and for any issues that arise...

  Providing that there are drivers available for your laptop to win 8, it should work...

• My Dell 1014 works on Windows Vista and I want to install Windows XP on it. "I am train to install a version that is older than the version that I already have."

  My Dell 1014 works on Windows Vista and I want to install Windows XP on it. When I insert the XP CD and try to install, the system throws a message saying that I am trying to install a version that is older than the version that I already have. How to solve this problem?

  original title: Windows XP installation

  Hi Ribhu,

  How did you start the Windows XP installation? This is the start of the Windows CD or Windows itself?

  You can try a new installation of Windows XP after formatting the hard drive Vista and check.

  You can consult the following wire link and check if it helps.

  How can I replace Vista with XP?

  Note: The above mentioned thread contains third party links.

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Also check out the link:

  How to install or upgrade to Windows XP

• Dell Media Direct uninstallation/replacement CD/DVD drive

  Inspiron 1720 Dual Core T7500, 2 g of Ram, Windows Vista Home Premium, Twin HD 150 gs each.

  1 would it not possible to remove Dell Media Direct and replace it with Power DVD or Win DVD without causing major problems.

  2 are better it CD/DVD rewritable drives for laptops the TSSTcorp-DVD + - TS - L632H - ATA Device. It makes everything a lot noise and sometimes sounds as he struggles to start.

  I would like suggestions.

  Dowdow.

  
  

• I bought a new laptop and you want to install Office 2003 (currently installed on the old unit) is possible to transfer the regestration again, or I will buy new software?

  I bought a new laptop and you want to install Office 2003 (currently installed on the old unit) is possible to transfer the regestration again, or I will buy new software?

  ianw10,

  Office 2003 that is installed on your computer to another is a an installation only. So not your duty go out and buy new software for it.

  If it was a purchased copy you can install it on the other computer. just call to activate it.
  Please rate me upward if you find my post helpful. Thank you!

• I have Vista Home premium and you want to install Windows Defender, but however get the 08x800106ba error message.

  I have Vista Home Premium sp2 and you want to install Windows Defender, but however Gets the 08x800106ba error message.

  Where should I go from here

  Hello

  You cannot install Defender in Vista; It is already part of the Vista operating system.

  Read about Defender:

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• computer inheirerted of father and you want to restore the factory installed vista system but do not know the password of admin fathers

  computer inheirerted of father and you want to restore the factory installed vista system but do not know the password of admin fathers

  Hello

  You should not have a password to reinstall Vista.

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• How to re - install Solitaire on windows XP I removed and you want to re - install?

  How to re - install Solitaire on windows XP I removed and you want to re - install?

  Wrong forum! A moderator will probably pass this thread to the correct forum (or you can move yourself by editing your original question).

  1. Control Panel
  2. Add or remove programs
  3. Add/Remove Windows components
  4. Click to highlight the accessories and utilities, and then click details...
  5. Click to highlight the games, then click details...
  6. Tick Solitaire
  7. Click OK twice, and then Next

  If Solitaire is already checked in step 6, instead it uncheck the box, then step 7, then repeat step 1.

  Tricky