Dell OMSA GUI reference works don't not with 6.4 CentOS 64 bit

Similar Questions

• Scan to PDF doesn't work don't not with J4680 all-in-One

  I can't get the scan to searchable PDF (PDF and PDF) file to work as expected with my new J4680.

  It works very well with other formats (TIF, JPG, etc.), but not with the PDF.

  It scans well request for additional pages correctly, and then try to create the PDF file. This is the process fails.

  An empty PDF file (size 0) is created and it fails with an error message:

  unexpected error, click OK to close the program, and perform the following steps:

  -Restart the program; -start the computer and try again. -Reinstall the software and try again

  8, [(6, 261,-2147417851)]

  (freely translated from the German - except for the error number ;-)

  Of course, none of the suggestions above, or any combination of these, or restart the printer works. Any ideas?

  Thanks, the problem is resolved for now.

  Suppot of HP was somehow in the right direction. I uninstalled the drivers all (!) of the 'old' hardware HP (6110 OfficeJect, ScanJet,...), reinstalled the J4680 completely and from there everything worked.

  Internal error (WIN XP) seems to be related to a conflict with older drivers.

  I hope this help if someone having similar problems.

  Thanks again,

  Alex

• Customer light HP t5325 doesn't work don't not with VMware View 5

  Hello

  I recently got a slim Pro HP t5325 customer for testing with VMware view 5. I ve the thin client to the latest firmware update:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 12454 & prodSeriesId = 4063703 & prodNameId = 4063704 & swEnvOID = 4030 & swLang = 13 & mode = 2 & taskId = 135 & swItem = vc-99080-1)

  who has the view 4.6 customer and according to the VMware compatibility list:

  http://www.VMware.com/resources/compatibility/PDF/vi_view_guide.PDF

  It should work with view 5. But when I try to launch the client and connect to your desktop from view, he asks just a super quick message (which I don't see) and then it brands the "active" session, but it doesn't open anything . View 5 Client on my laptop works very well and I m able to access the same desktop VM.

  My current setup is:

  • vCenter server 5
  • ESXi5
  • VMware View 5

  What Miss me? Any help would be appreciated.

  Thank you!

  David

  Hello

  I had the same problem this week. He is not related to view 5, same problem exists also with 4.6.

  The problem seems to be that when you try to open the connection, the client calls a /usr/bin/view_wrapper.sh script and this script does NOT run with user privileges? However, if you switch to admin and then open the connection this script works well. You can test it by opening the X terminal in the thin client, then the su user and try to run the script manually /usr/bin/view_wrapper.sh start at 0 and you will get a prompt for sudo.

  I tried to add the useraccount 'user' in/etc/sudoers and allow that user rights sudo for view_client and view_wrapper.sh programs. Did not help

  If you add the user 'user' to the root group, connection opens fine but then you let the open thin client for the standard user to mess with.

  Quite a bug in the software? They don't do any test before releasing these?

• Preview in the browser doesn't work don't not with Firefox 3.6 [was: Firefox 3.6]

  I use DWCS4 on OSX 10.5.8 and that you have just installed Firefox 3.6 update.

  Preview in the browser no longer works. This has happened with a recent update of Firefox - what is someone having this problem?

  [Subject edited for clarity by Moderator]

  You can make a color hex "pipette" very fast easy on a Mac.

  First of all, download this:

  http://wafflesoftware.NET/hexpicker/

  It adds the functionality of hexadecimal color to ColorPicker.

  Then open the Script Editor and enter the two words: choose color

  Save as an application (this creates a stand alone ColorPicker).

  Launch.

  Select the mirror of ColorPicker icon, the cursor and click anywhere to get a hexadecimal color value.

  I think that there is probably a way to make this app always float. If someone could put the AppleScript for this, I would be very happy.

  I hope this helps.

• Dell webcam central reference works do not.

  I have a computer dell laptop with a built-in webcam that doesn't work anymore. I have Windows 7. Everytime I open Dell Webcam Central it says "please connect a device supported", I don't know what the problem is and I can't find the webcam on device manager on my computer. It is not under what it is. Under USB controllers, but there was something that said device unknown and I uninstalled it to see if that would do anything, but no change. Please help, thanks.

  Hello

  No, you can either get the only fixed internal and if this cannot be done so using an Add - on camera.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Dell Webcam integrated reference works do not for Windows Vista in Inspiron 1525

  The Dell Inspiron 1525, I bought new 2.5 years ago.  When I got the laptop, I tried to use the webcam, but it did not work.  It shows only a screen black when the webcam running rather than capture images.  I try once more to use the webcam, and it still does not work.  Any ideas?

  Hello

  ·         Do you have a CD of the software with the laptop when you bought it new?

  You may need to install the updated release of the request for the webcam and check if that helps you to use the webcam.

  Download utilities system for the portable computer from the link below and check if that helps.

  http://support.dell.com/support/downloads/driverslist.aspx?os=WLH&catid=-1&dateid=-1&impid=-1&osl=EN&typeid=-1&formatid=-1&servicetag=&SystemID=INS_PNT_PM_1525&hidos=WLH&hidlang=en&TabIndex=&scanSupported=True&scanConsent=False

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Nothing I find works, don't not even your solutions, I wan't to restore my page of the tab back to "on: newtab ' but I can't, even when I go in" subject: config.

  Everything I try does not help, when I press the new tab button it always shows the "AVG safe Search" page, without worrying if I'm going in: config and change browser.newtab.url or whatever he is called back to the default value. I used the thing to restore research as well. nothing works. Can I change my homepage, but I do not honestly what is my homepage, I want my new page of the tab back to normal. The only thing I thought that work was a message that appeared in the corner saying "Restore default new tab page" I have until it clicks, translating the french text block, agree and then open a new browser and a new tab to see if it worked. It does not work. I don't know what to do, I want the page default new tab back.

  You can disable any extension on the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then on the side right, enabled extensions are listed alphabetically, with extensions disabled downstairs.

  Often, a link will appear above when you disable an extension to restart Firefox. If you disable multiple extensions, you can complete your work on the tab and click one of the links in the last step.

  Is that what helps you regain control of your new tab page?

• Wake on LAN doesn't work don't not on my 8.1 Windows R7

  I can't get my R7 running Windows 8.1 to wake up from sleep with a WoL «Magic Packet» State I use a Plugable USB2 (6 AX88178/Realtek RTL8211CL) ethernet adapter. I have six other PCs on my home network, all running Windows 7, and WoL works very well on all of them.

  I activated the WoL function in the bios of R7 and the device settings for the NIC Plugable (for which I have downloaded the latest drivers from Plugable), and I tried to wake up the R7 with the QuickStart feature, on and outside. The R7 is lying just through it all.

  Any suggestions?

  vvprad, thanks for your response. But note that if you uncheck the 'disable', the 'magical' 'waking up' boxes and as the two gray outside. Apparently, let the PC to disable the NETWORK adapter in order to have the rest of the NIC in the PC. Makes no sense, but it's the way Win7 Win8 do.

  Anyway, I tested my NIC USB on your laptop Dell Win7. WoL did not work it either until I enabled wake USB in the bios. So if you use a USB NIC, to look for the right settings for the NETWORK card and USB. As you suggest with the suggestion of USB power setting.

  But here's the gist: I unplugged the NIC port USB3 on my R7 and connected to the USB2 port and WoL woke up. The USB NIC did everything perfectly using the port USB3, but not of WoL.

• HEADSET DOESN'T WORK DON'T NOT :(

  I have a HP Pavilion TouchSmart 10 10-e004au Notebook PC. Whenever I plug my headphones sound speakers instead of headphones. my computer does not even respond when I plug in the headphones. I tried with several Different headphones, and it still does not work. I don't know if there is something wrong with my computer or I have to download a software to do its job. I have had this problem since I bought my laptop. Help, please

  Hello Renee19,

  I see you have a problem with the sound from the headset. I'll try to help you with this problem.

  Try different headphones you mention. Have you tried USB as well as that use the socket? This would help to test the equipment, it could be the headphone jack, which is the issue.

  I also recommend looking threw this document:
      Solving Audio problems with speakers external, headphone and HDMI Sound Devices.
  Also this:
      No sound from speakers (Windows 8)

  I would like to know how everything goes.
  Thanks for posting on the HP Forums.

• Mute turns do not Off / Audio doesn't work don't not since the last update of Windows 8?

  I don't know if it is caused by the update of Windows 8 for a few days, but the problem started around then.

  The audio on my laptop does not work. The 'secret' remains switched on, even when I press the physical keyboard button to activate the sound and try to activate the sound with my mouse in the menu volume. Nothing to audio.

  Laptop is a HP Pavilion dv6 Notebook PC running Windows 8 Pro 64 - Bit.

  I've seen other people mention a problem like that recently. Any help would be appreciated.

  Hello world

  There are a few troubleshooting you can do for this issue and a work around. One of my colleagues has posted the troubleshooting steps and work autour from here.

  Thank you

• WiFi doesn't work don't not on vostro 3460 after installation of windows 8

  HII,

  I have vostro 3460, after installing wireless window 8 works do not, I downloaded the driver wireless dell site, but its not to proceed with the installation

  Please help me

  OK, I found a solution

  -Download the 1 x 1 Dell Dell Wireless WLAN 802.11b/g/n (2.4 GHz), the Bluetooth v4.0 + HS driver (link: Network_Broadcom_W7_A01_Setup-WTD28_ZPE)

  -Run the file. It will extract to c:\dell\drivers\WTD28. Then an error/warning occurs and that execution is aborted.

  -Open the Windows Device Manager. Find the missing element of WLAN with the yellow exclamation point (here name like 'Network controller')

  -Update the driver manually and use c:\dell\drivers\WTD28 as the path of the driver. It will automatically install and start working.

  Hope it helps someone

• some characters on the keyboard doesn't work don't not after macos sierra installation keys on one side does not not after installing sierra on my mac pro book

  keys on one side does not not after installing sierra on my mac pro book

  Hello dssheorey,

  Thank you for using communities Support from Apple. I have a problem with your keyboard after updating is not what you expect. The good news are the following steps will help to solve your problem and get your keyboard working properly again. First, start by resetting the management system (SCM) controller on your Mac:

  Reset the management system (SCM) controller on your Mac.

  If you still having the problem after resetting the SMC, use safe mode to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory. Sign in to your account in safe mode and test the issue again. Then restart normally and test again to see if this problem is solved.

  Try safe mode if your Mac does not end commissioning
  Graphics performance limited in recovery of OS X or in safe mode

  See you soon!

• Book Pro 4510 s: graphics drivers works don't not use windows 10, 32-bit

  HIE am now using windows 32-bit, Windows 7 10, the name of my laptop is pro book 4510 s its a 1.9 gig, have the problem is just that my graphics driver works not because they are very old. Please how to download or upgrade the graphics driver

  Hello:

  What graphics card is has your laptop?  AMD or Intel?

• Re: NB100 - sound does not work [workarounds don't work don't not ethier!]

  Hello
  I recently got myself one of these notebooks, being a windows user and not ubuntu, I decided to update instantly all the features by using the Update Manager.

  This however seems to have killed the sound now, I tried almost everything that was found using google search to get my sound back, however I had no joy.

  I even tried to use popular workaround as copied below
  Hello.
  Anyone who has lost the sound on their notebook can recover missing drivers by entering the following information.

  + Break. +

  + Input terminal.

  + Type sudo mv/lib/modules/2.6.24-19-lpia/updates/sound~/sound+

  + press enter +.

  + password +.

  + press enter +.

  + Type sudo depmod-a +.

  + Press entrance cut Notepad then restart +.

  + good will now be back with you.

  + fun people any probs mail me or enter post and ill do my best. +

  but still no solution. It returns an error saying the files are not.

  Any help at all?

  Thank you very much

  Craig

  It would help if someone downloaded their drivers audio nb100 working and I installed them?

• Utility standby power works don't not/can not uninstall

  When I try to start the control panel power saver, he wrote something like:
  "Power Saver is not running. Please firstly set Power Saver as a control of default power scheme in power management".
  But saving energy is already defined as my power control scheme.

  I tried to reinstall Power Saver (downloaded from the Toshiba site), but he writes "fatal error during the uninstall of the previous version.
  Uninstallation manual start giving me the same error.

  I found that I can delete Protocol energy saving uninstall.
  After doing so, the new version has been installed without problems, but still does not. The same error:
  "Power Saver is not running. Please firstly set Power Saver as a control of default power scheme in power management".

  I tested this option with my laptop and it works well. It's really not easy to say what is happening here.
  Can you please tell us which laptop model you have?