Dell OptiPlex 3240 AIO: Processor: Intel Core i5-6500 Processor (Quad Core, 6MB, 4 t, 3.2 GHz, 65W) Chipset: Intel® H110 graphic Chipset integrated Intel® HD Graphics 530 memory: 8 GB (1x8GB) 1600 MHz DDR3L hard drive: 1 TB 2.5 inch SATA 7200 RPM HD.
Looking for AIO 3240
This page has several to choose.
Tags: Dell Products
Dell OptiPlex 3040 compact Micro: technical specifications CPU: Intel Core i5 - 6500T processor (Quad Core, 6MB, 4 t, 2.5 GHz, 35W) Chipset: Intel® H110 graphic Chipset integrated Intel® HD Graphics 530 memory: 8 GB (1x8GB) 1600 MHz DDR3L
Looking for form factor Micro Dell Optipex 3040
This page gives you the small forms and choices.
Dell OptiPlex 3240 AIO:
Processor: Intel Core processor i5-6500 (Quad Core, 6MB, 4 t, 3.2 GHz, 65 w)
Chipset: Intel® Chipset H110
Graphics-integrated Intel® HD Graphics 530
Memory: 8 GB (1x8GB) 1600 MHz DDR3L
Hard drive: 1 TB 2.5 inch SATA 7200 RPM HD.
I answered this question on your other post.
I am watching the XPS 420 system and trying to determine if the performance of these two drives are the same.
There the 640GO disk cache 16 MB healthy of mind as the 320 GB drive? 640GO there rate 3.0 Gb/s as the 320 GB drive?
Upgrade the internal HD on my DV5220us of the standard 120 GB drive at 5400 RPM to a 500 GB drive at 7200 RPM and I have problems with the laptop recognize the drive. I did a ghost of the 120 GB image and then put the image on the 500 GB. When I install the 500 GB drive in the laptop, it does not recognize it. booting with the XP cd does not recognize the drive either. I've updated to the latest version of the bios, 24 I think, stll nothing. If I use cables and connect the 500 GB as a slave drive, he sees very well and it works. If I take the 500 GB and install in my Lenovo T61, it starts fine. No idea why the DV5220us does not recognize the HD Seagate 500 GB Sata 7200 RPM? Thank you!
No one gave me an explanation to the problem. I'm actually advise to stick with a 320 GB 5400 RPM drive 500 GB 5400 RPM drives because have also been reported to cause problems. I'm sorry.
I bought three Kingston 8 GB RAM DDR3 1600 MHz 240 pin DIMM that totals up to 24 GB of RAM and install in my desktop computer. When I turned on and the message appeared saying:
Maternal health and infant is running with DDR3 - 1333 MHz
WARNING! Previous overclocking failed, and system restore its default value. Press F1 to continue, F2 to enter Setup Menu
When I access the BIOS setting (version A10), I disabled XMP and then it went through fine after the reboot. However, I have to have XMP allow at any time? How can configure profile 1333 MHz to 1600 MHz XMP?
What bothers me is that I had three former PIN of Kingston 4 GB RAM DDR3 1600 MHz 240 DIMM which total up to 12 GB of RAM and the XMP worked very well with them before they were 1600 MHz.
The type of computer I have is:
Alienware Area-51 ALX
Intel Core i7 980 Extreme 6 c with 12 MB of Cache
Windows 7 Ultimate
Please, help me to solve this problem. Thank you.
And I certainly don't have the answer, but I'll remember these points:
1. I think that you can set manually nothing XMP adjustable (but with more control).
2 machines often memory need to be slowed down when you are near maximum capacity look maintenance manuals.
3 area-51 has never been tested or even allow the 8 GB DIMMs. You are in the new territories.
4. If you really need 24 GB (and it works at 1333) then the 267 speed drop is insignificant.
I have two Elitebook 8440p PCs that both run an Intel i5 520 m (although one of them has a discreet Nvidia NVS 3100 m, while the other does not and use the integrated graphics card Intel).
I also have a Pavilion DM1-3020us with an AMD E-350 APU; It's the only other PC I own which takes SO-DIMM DDR3 modules.
I just bought this Crucial DDR3L 1600 MHz 2x4gb hoping to use it with the 8440p without the graphics from Nvidia:
However, it causes crashes and BSOD as soon as he tried to start under Win7 64 bit on both 8440 p PCs. Also when trying to boot Linux Mint 18 I empty a kernel panic, and run Memtest86 + just leads to restarting the PC within seconds. Yet, I can navigate through the BIOS throughout the day and it will continue to work very well...
But here's where it gets really weird - the RAM works perfectly fine in my laptop DM1 Memtest86 + and Win7 64 bit (I use it as I type this). What's curious? Because both the AMD E-350 and the Intel i5 520 m only support up to 1066 MHz RAM!
The only thing I can think is that there is something wacky where RAM is unable to operate at 1066 MHz at 1.5V or is not able to run at 1.5V to all E-350 1.35v support (and 1.5V RAM so that the i5 520 m only supports 1.5V) which itself would be really strange that Micron (which actually manufactured the RAM) States on their website that their 1.35v and 1.5V RAM have actually the same die (a bit like mobile i7s quad vs quad I5S Office) and that both can operate at 1, 5V, implying therefore that the 1.35v product is simply a higher binning:
Crucial live chat support, however, closed several hours for the day, so I thought I would at least make this post in the meantime.
Please see this thread, and the discussion that I posted in this thread... and you'll have your answer.
6550 b has the same chipset as the 8440p. I posted the link to the site from NewEgg for the memory, you need to buy if you live in the USA/Canada in the discussion that I've referenced to the other person who had the 8440p.
There are several discussions on this issue if you want to find even more. Everything is solved by specific G.Skill memory I posted.
The extent of why it works in the dm1 and not the 8440p, the chipsets are different. The Intel chipset in the 8440p doesn't support voltage DDR3L. Comparison of AMD and Intel chipsets are like comparing apples and oranges.
I also believe that the chipset amd in the dm1 is more recent than the chipset in the 8440p and promotes low-voltage memory.
I have just return from memory and use the gift card on something else.
I doubt that Best Buy has this specific memory.
General question: if I save a file to an external memory device, not the file always save on my hard drive?
No, you only saved once so he saved to the new location. The best way to save is to save and save as
my computer information are:-
1 probook 4420 s (14 ')
2 processor 2.27 ghz-core i5 430 m first generation (3 MB cach-64 bit)
3 ram 8 GB 1333 bus (after upgrade)
4.OS - windows 8.1 pro 64-bit.
5.HDD - 256 GB transcend ssd after upgrade (after was Hitachi 320 GB 7200 RPM)
My Question is...
1. I used HP 3D guard player when use Hitachi 320 GB 7200 RPM HARD drive.
NOW, I want to know to use 3D software guard drive after upgrade SSD HARD drive?
3d can damage the SSD or custody of drive?
because after upgrade windows 8.1 Pro, in Device Manager it show unknown device '? After installation 3d player it keeps show OK. !
That's why I want to know is - this safe for the SSD or not?
There is no need in fact HP 3D DriveGuard for one SSD as there are no moving parts - this application is not relevant to a mechanical hard drive, where sudden movements, detected by the accelerometer cause the drive heads be "stored" in damage to storage media.
However, as your machine has an "accelerometer" leaving this driver installed will not affect the function of your SSD and prevents the Device Manager appears an 'unknown device '.
DP - K
Looking at the addition of a couple of hosts "workaholic" into our environment vsphere for some SQL database applications. Is there an advantage to the esx server hosts on 15 k disks running over 10 k?
We use a mixture of San fibre channel/iscsi to all data warehouses, so this isn't for the vm comments just for the esx install.
Just curious to know what you guys are running, and if you see performance gains overall with faster disks to the host install.
If the disks are only for the accommodation of the operating system, there is not need to spend money for fast readers. You can even run the hypervisor of a patient USB or SD card.
Forum upgrade notice:
VMware will be upgrading systems VMware communities between December 10-12, 2010. During this time, the system will be placed in READ ONLY mode.
Reference Dell dear users.
I have a Dell Optiplex 755 SFF, and I would change all my materials for the best components that I can use.
Is it possible to upgrade my processor Q6600 to a Q9550 / Q9650?
I know there is no Q9550/Q9650 on the compatibility list, but I saw someone put the CPU into this motherboard, and he said that he works very well with this motherboard. So, what is your suggestion? I would like to give it a try? Will it work? Or is it just a complete?
Is it possible to put a primary HARD drive and a secondary SSD in the system?
If this is the case, what is your suggestions? I thought about a 120 GB SSD system and a 1 TB Western Digital HARD drive, it's a good combination? (7200 RPM, SATA)
Who is the STRONGEST Videocard for its price, which can adapt to this mobo?
Many people say LP 7750 HD is the best of what you can get, but I checked ebay and other Web sites, even sought a 7750 HD LP "pre-owned", but I could not find. What video card do you offer me?
RAM 2 GB (1x2Go)
INTEL GMA3100 (: C)
150 GB HARD DRIVE
7750 (now called profile low 250 R7) uses more than 25W you run the risk of damaging your system.
Low Profile Fanless Silent ASUS EAH6450 to 27W is the max I would use.
I have a model of HP Pavilion dv7 - 2173cl with:
- Intel Core 2 Duo P7350 CPU processor.
- Windows 7 Home Premium - 64 bit (factory installed Vista update) OS.
- 2048 MB is memory.
'SMART' HARD drive imminent failure message received:
- Original disc installed HARD is a 500 GB Western Digital model WD5000DBEVT.
- SMART two weeks' ago error messages indicating imminent failure of HDD appeared.
- A check of the HP Web site checked the error number corresponds to "imminent HARD drive failure.
- The message prompted me to 'save' the HARD drive.
- I completed a backup of files and an image via the "Backup and Restore" feature backup of Windows 7.
- The backup has been to an external Seagate 1 TB USB connected external HARD disk
- In addition, I created a 'Windows 7 64 bit system repair disc' using the backup and restore of Windows 7 feature.
Replacement HARD drive:
- I bought a 750 GB (7200 RPM) Western Digital model WD75000BPKX.
- When formatting the HARD disk (via the CD of 'Windows 7 64 bit system repair disc') replacement I observed the formatting of the process that the size of the disc HARD has been reported that 500 GB (compared to the actual size of 750 GB).
- With the help of the rollback on the CD "repair" feature I restored it (backup on external USB connected HDD image) image.
- Later, I check the 'properties' from the 'device' (the new HDD of 750 GB and observed that Windows 7 also pointed out this new HARD drive as a 500 GB drive (compared to a 750 GB drive).
Site HP Web search:
- A search in the Web of HP SP5575, referred to as software download site and 'run' to identify a 'Advanced Format hard drive.
- A downloaded execution of and run this software has given rise to the audit that the 'new' Western Digital model WD75000BPKX is an 'Advanced Format Hard Drive.
- The site also shows to support a 'Advanced Format hard drive' the "device driver" must be at least version 9.6.01014 Rev: has (the current version is 6.1.7600.16385).
- The SP50624 Web site, referred to as software to download and 'run' to update the disk device driver (found in Control Panel/Device Manager/disk drives/Driver/updated updated driver for Windows 7).
- I have downloaded and run SP50624 and as a guest 'Update Driver' selected in the Control Panel/Device Manager/disk/disk driver and also "indicated the location where the new driver after 'running' SP50624.
- Windows has responded with "the driver is up to date" and selected version 6.1.7600.16385 driver (i.e., would not version 9.6.01014 Rev: A).
- The software (e.g., Windows) running on the 'new' unacceptable short slow disk. It is a symptom commonly identified when a disk with 'Advanced Format' works without the drivers appropriate and formatting.
Issues and options:
- Is there a solution that will allow the model of HP Pavilion dv7 - 2173cl to use this 'new HARD drive (a compatible disc HARD driver update that will install or another available solution that will accommodate a HARD drive to Format advanced such as the 750 GB (7200 RPM) Western Digital model WD75000BPKX)?
- Or is my only solution regarding the HP Pavilion model dv7 - 2173 cl to buy a 500 GB HDD without 'Advanced Format '?
- And finally buy a vintage/new laptop today.
Thanks for your suggestions.
I solved the problem as follows:
- I chose to reload Windows 7 from "scratch" after your positive validation of this approach.
- This required me to reload all applications (for example, Microsoft Office).
- Note: A reload of the OS and Applications from "scratch" requires access to the "Product Key".
- During the initial charging of Windows 7 and the formatting of the 'new' drive Windows 7 provided the possibility to remove the partitions (remove/reorder) that had been affected by the recovery process 'attempt' described above. With the help of this function I eliminated the partitions and 'Add' the "unallocated" space to the overall capacity of 750 GB HARD drive.
- After reloading the OS, I checked via 'Properties' that all of the 750Go were present and available - success.
Thank you for your support.
Hello, I have a HP Pavilion a6709sc and some problem with install vista.
I changed the hard drive to a 500 GB Seagate Barracuda 7200 RPM SATA 6Gbit/s because the other crasched, but now when Im trying to reinstall vista they cant find my hard drive as an option to install vista on it.
What should I do? I think it's something with the sata controller drivers but don't know how to install them in the meny facilities.
Can someone please help as quickly a possible really need the computer now.
Sorry for my English but I'm from Sweden hehe.
Thank you for me.
I have set right now in a different way but thanks for the replies.
I have a Satellite A100-044, I would spend my the 120 GB HARD drive to a more large (250 GB or 320 GB).
A 7200 RPM would work on this subject? It seems Web compatibility sites they show 5400 RPM more, I would like to set up my laptop for recording/mastering so music wants a fast machine, I don't really mind if it consumes more energy...
Of course, you can swap the HARD drive with a model more fast using 7200 RPM. But as you say, it takes a little more energy. The new HARD drive should be a little faster, especially access time should be lower.
250 GB or 320 GB should be possible; you need a HARD drive with SATA interface.
I hope I could help a bit.
Hi all. Great support so far!
Replaced the motherboard with a purchased on eBay, and it works very well.
In my quest continues for speed and "new and improved", and because it is now 11 years old, I am looking to replace my old hard drive. Any suggestions will be greatly appreciated.
Thanks again and I do,.
Thank you wb2001,
A note aside before my supplementary question: Pavlov studies were on classical conditioning. He used the meat powder in the dogs mouth to stimulate salivation canine combined with the sound of a Bell when the dogs became finally conditioned. Once conditioned, the dogs would salivate upon hearing the Bell. What you describe with the reward for behavior is the conditioning operating. So what you want to say in the future be more precise, it's "I believe in right to Skinner" like B.F. Skinner.
Be-that-as-TI-may, stick to your reference to Pavlov for now wb2001, you're a good answer away from getting the meat powder.
(1) I replace a HDD of 80 GB, 127 GB would be just peachy.
(2) I know that XP is to be DX would be next year. Being attached financial short term, I just need this machine to putter along until the end of this year.
(3) so I'm looking for a refurbished drive EIDE/Ultra style on eBay or Amazon, etc.
Is there something else that I would like to know to get an EIDE/Ultra player that will adapt, be compatible and the fastest runner of the old dinosaurs?
You are looking for on eBay, I find some potential hard disks. Please answer the questions following multiple-choice question. If you get it right, right of Skinner, your needs will be satisfied immediately:
Looking at the following hard drives, which will be compatible and fast running in the Presario 6350US:
(A) 120 GB 7200 RPM 8 MB Cache PATA (EIDE) ATA/100 internal desktop 3.5 "Hard Drive-new
(B) new 80 GB 7200 RPM 8 MB Cache ATA/100 EIDE-3.5 "hard drive PATA
(C) NEW EIDE 3.5 7200 RPM DESKTOP HARD DRIVE 120 GB - 1 YEAR WARRANTY
(D) Maxtor Diamond Max 60 GB 3.5 "internal Ultra ATA / EIDE hard drive 7200
(E) Seagate 160 GB EIDE ATA 7200 RPM hard drive refurbished
(F) none of the above
(G) one him above including (complete):
Eternally grateful and hoping you have a good sense of humor, I.
Maybe you are looking for
Hello world There are two features on the CM2320fxi absent on the CM2320nf version that I would get if possible. Can I add auto duplexing (available on the ' fxi) to my ' nf?Can I add slots for memory cards to my CM2320nf? Since I have this free prin
I want to integrate Skype video call on my Web site, is there any /API tutorial using SKYPE4COM.dll refer. Please help me give some mention the link to Skype video calls with asp.net c#. because most of the links that I checked is dead or cannot be f
Hello I have a Portege R500 and I managed to break the screen.Part number is LTD121EWEK. Do I need to replace it with the same or are they some compatible screens which will be adapted? Thank youWooju
When I try to buy a book, it seems it download but does not work. If I am able to get a sample and try to buy the sample goes far &; no new book. There are funds in my account iTunes Help!
When I try to buy a book, it seems it download but does not work. If I am able to get a sample & try to buy the sample goes far & no new book. There are funds in my account iTunes Help!
Hey all - So, my goal is to transfer my old hard drive to a new motherboard without reinstalling my OS. I heard that it is possible, but difficult. If I find it's too intimidating, anyone know how I can do to reinstall my windows 7 if I don't have an