Dell OptiPlex 3240 AIO:
Dell OptiPlex 3240 AIO:
Processor: Intel Core processor i5-6500 (Quad Core, 6MB, 4 t, 3.2 GHz, 65 w)
Chipset: Intel® Chipset H110
Graphics-integrated Intel® HD Graphics 530
Memory: 8 GB (1x8GB) 1600 MHz DDR3L
Hard drive: 1 TB 2.5 inch SATA 7200 RPM HD.
I answered this question on your other post.
Tags: Dell Products
Dell OptiPlex 3240 AIO: Processor: Intel Core i5-6500 Processor (Quad Core, 6MB, 4 t, 3.2 GHz, 65W) Chipset: Intel® H110 graphic Chipset integrated Intel® HD Graphics 530 memory: 8 GB (1x8GB) 1600 MHz DDR3L hard drive: 1 TB 2.5 inch SATA 7200 RPM HD.
Looking for AIO 3240
This page has several to choose.
I have an old Dell Optiplex Windows XP on which I have my checkbook in Quicken. This machine is not and will never be connected to the Internet. I'm trying to install the 4650 on that software from the CD, but he insists on the final step which is Internet check-in. What should do?
It seems that I understood the problem. I am running XP SP2. I've upgraded to SP3 and voila! the printer now works perfectly. Sorry to have left out retail SP2 when I asked for help, but your help is very appreciated nonetheless.
I have a chassis PXI-1050, conencted to a Dell OptiPlex 9020 via a PXI-8360 and a PCI-8361 (identified as 199392B - 01L). It is Windows 7 64-bit. I can't start Windows very well, but MAX can't see all my PXI hardware. The Device Manager has also 2 inputs "PCI standard PCI to PCI bridge" with exclamation points.
I placed an old FireWire PCI card in the same dwelling and recognized PC. Thus, the slot went very well.
I transferred the PCI-8361 to an old PC that contains older drivers, and he acknowledged all my PXI hardware. For example, PXI gear works fine.
What could be the problem? Here's a screenshot of my software OR installed. I think I installed all the drivers I need. I checked NI Update Service; There is no update of Critcal, and only updates and Service Packs listed are 2013 LabVIEW and TestStand 2013.
I look in that little bit more and think that I now know enough to be dangerous.
The BIOS allows the PCI Express native control mode in Windows. PCIe natively do not like some of the architecture when you use the PCI card version, so it disables the bridges on the PXI card. I can tell that your OS is PCIe natively because it lists one of the ports as "PCI standard PCI Express to PCI/PCI-X bridge" Device Manager like you posted.
I found that you can disable PCIe native mode, if you want to try it (but in general using the card PCIe is a better option). Here are the steps:
-Open the start menu and type "cmd" in the search box; Right click on "cmd.exe" and run as administrator.
-In the command window, type "bcdedit/set pciexpress forcedisable.
I don't think it would break anything (it doesn't have on a system I've tried). If you want to reverse the trend, the command is ' bcdedit/set pciexpress by default'
Original title; No driver :(I'm on win xp family on dell optiplex 760 instead of vista I have struggled with vista but it does not have all the drivers manually, I found the driver ethernet, but other don't download saying I don't meet the minimum req or dell itself said to download a driver manager, but windows won't let me not download it pls help?
Here you go --> http://support.dell.com/support/downloads/driverslist.aspx?os=WW1&catid=-1&dateid=-1&impid=-1&osl=EN&typeid=-1&formatid=-1&servicetag=CRQKK4J&SystemID=PLX_760&hidos=WLH&hidlang=en&TabIndex=&scanSupported=False&scanConsent=False
At this link are 18 drivers and applications which would have been applicable to your specific computer. Read the instructions.
In particular, read only 4 articles linked at the top of this page, including "in what order must the drivers after reinstalling Windows on my laptop or desktop? --> http://support.dell.com/support/topics/global.aspx/support/downloads/en/drivers_help?c=us&cs=04&l=en&s=gen
OLA me lla mo I have a dell optiplex 780 migue y lo muestra in el ordenador no audio rreproduce me pueden decir como instalo el driver of pc audio mid
I have a desktop Dell Optiplex 620 with Windows XP Professional installed. Is it possible to
clean and reinstall without disks?
I'm sorry, it is not possible to perform a clean installation of Windows XP without using the Windows installation disc.
See the following article from Microsoft for assistance.
Please reply with the status of the issue, so that we can better help you.
My Dell Optiplex 745 is one of the workstations using a coupleof of network printers. We had to spend a different network server printers when the old server is dead. Dell Optiplex connects to the network but requires a printer driver must be installed. I have the disc but still cannot install Brother HL 5250DN and drivers HP Laserjet 3055 printer. The error is XCopyFile failed. Technicians of brother and Dell have checked their end and the material is very well and that he is in fact the operating system software that is bad... I use XP Professional... What is the problem and how to fix it?
My problem has been resolved. Apparently, brother and HP did not have universal printer drivers that lead to malfunction during the installation of my printer server 64-bit for my 32-bit user workstations. Had to call the COMPUTER group to install the printer driver on the server - dared not do it myself because it might spoil the workstations. Then I connected from my workstation on the server and downloaded the 32-bit driver option that I downloaded.
Why companies can't simplify their software and make universal knowing that there are 32-bit and 64-bit users?
Cannot install a new SATA hard drive in Dell Optiplex 170 L. Windows XP Pro SP3 cd cannot find the hard drive. Need help please.
This problem is related to the installation of the equipment, I would suggest you get in contact with the system manufacturer for assistance that you need the BIOS (Basic Input Output System) Setup to install the new Windows XP SATA drive. Will also need you a floppy drive to install the new SATA drive.
Can I add a memory for my Dell Optiplex GX280? He is running on 2 256 MB. dor2. 400 CL3
* Nothing * to do with Microsoft Windows, really.
One place of spec on (and to buy, actually) good memory of:
With the help of their memory Advisor... I see...
Type of memory: DDR2 PC2-5300, DDR2 (non - ECC)
Maximum memory: 4 GB
Memory each slot can hold DDR2 PC2-5300 with a maximum of 1 GB per slot.
But with this machine, except if you use it just for the essential (and nothing more recent than the manufactured 2005-2006ish date topic installed on it) - I suggest not wasting money. Do pretend, raise money and then don't buy it. What to do for the next few months and buy some replacement $ 300 with twice the processor, three times the RAM and probably several times in the space of hard drive... ;-)
My dell optiplex 740 will not start. The screen is black, once it displays the Dell logo. It does not say that the computer is in mode 'sleep'.
- Did you the latest changes on the computer?
- When was the last time it was working fine?
- You receive an error message?
See the articles below and check if it helps.
Computer stops responding with a black screen when you start Windows XP
After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen
I suggest that you start the computer in the last good known Configuration mode and safe mode, post back with the result.
A description of the options to start in Windows XP Mode
How to start your computer by using last good known Windows XP Configuration
How to fix a computer that does not start
If the computer can boot in any mode, then I suggest that you perform the clean boot procedure and check if it helps.
It is possible that some third-party programs installed on the computer is causing the problem.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See section to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
Nice dayI reinstall Windows XP on a Dell Optiplex 760.The system came preloaded with it, even if the certificate of authenticity (COA) indicates has a license for Windows Vista professional.I'm reinstalling provided factory recovery disc.My question is, what to do when it comes to enter a product key? Of course the key to Windows Vista Business will not work. There is none on the system or on the cover of the CD.
Well, I found the answer, it does not require a product key.
How can I restore my computer to a factory State, it's a dell optiplex gx1
HelloYou can check this link:Note: It is very important that you back up all your personal data before you go forward because it would remove all of the suburbs
I have 5 Dell Optiplex GX 620 desktop computers. All are about 5 years old. Had a hard drive failure so I replace the disks C: by secondary SATA disk cloning, disk 1 in the bios. BIOS sees drive when Windows XP on two systems and not on the other three. Have no idea why. All rooms have all the updates of Windows and Dell. A bought WD Caviar Green drives. WD has replaced three with Caviar Black readers and still does not work.
Level 2 support WD had response which was to creat Acronis True Image WD Edition BACK boot CD for the windows version of the software, (that I downloaded on www.wdc.com), boot to a CD and had the disc I cloned then. I wish only the support level 1 guy was aware of this utility.
What ethernet controller I am supposed to use on dell optiplex gx 260
Open a command prompt window and type the following command
This will display the status of network cards installed on your computer.
You can also use the Device Manager and look under the node "network adapters."
This should be the web page linked to your PC
In the "DELL RECOMMENDED" box you will see a link "Scan your System for Updates" which could be useful to discover the devices installed on your system.
Maybe you are looking for
I cleaned a lot of junk out of my files and some expensive files to my roommate where accidentally threw it would repair our friendship is very important to me. Thank you.
I bought a new laptop and it came with pre installed Vista Home premium 64-bit with SP1. The information system is the chipset Intel GM45, integrated graphics, 4 GB of RAM and 320 hard drive. The system hangs at random without error regardless of wha
I have a brend new, just out of the box, Acer V176L monitor combined with the Acer Veriton X2630G Windows 7 64 bit system. When I turn on the monitor I get the Acer logo then the Energy Star logo and then it goes black. The power light is on, no butt
So I can pick it up at the factory using F11 with no disc setting?
Hello! You just bought a Sansa Clip 8 GB for the United Kingdom and I'm very happy with it - many of my CD then tried to get smart (?) transferred by creating a playlist, put a few songs in there and synhcing to the top with Clip - no joy! The read-