Dell OPTIPLEX 760 error when loading the BIOS, lights 1 and 4

Similar Questions

• Satellite L675-11R - crashes when loading the BIOS

  Hello

  My daughter L675 crashes when loading the BIOS.

  Yesterday the system firstly could not start with a "Boot failed" error, as the HARD drive is not found.

  I restarted and is gone in BIOS - the HARD disk was recorded and shown as a first Source of seed. After reboot, the system has failed again with the same error.

  After several attempts, even if it does not. now that appears in a black screen, blinking cursor top left. Hot start works, but another key not seem to provoke a reaction. I can't start the BIOS Setup.

  I removed the HARD drive and connected it to my PC. It was recoginized and I am able to write to it. A W7 disk verification completed successfully and some problems have been "fixed". But when I reinstall the drive of the laptop, it still does not start.

  I double checked that the drive & Modules of memory are well inserted.

  Any ideas I can try?

  Thank you

  John

  Well, the cursor blinking in the upper left corner is a typical sign of a malfunction of the HARD drive.
  I think you need to format the HARD drive using other computers. Delete all partitions and insert the HARD drive into the L675 again.
  Then try to install the Windows system on this device.

  In addition, you can try to check this HARD disk using a 3rd party software.
  Drive Fitness Test is a free tool that can help you test the ability of the HARD drive.
  If some errors would be detected, then a replacement HARD drive would be desirable.

• Satellite Pro A10: Error when loading the drivers and other things

  Hello.
  I just bought a spare A10 to ebay. I already have an A10 and the company. Powering up the new A10, I have a bubble message from microsoft saying that it was unable to load the drivers for the cd burning software, please update the drivers. If I click on the bubble it says to update of real player, roxio or other recording software.

  As I did not immediately and there not there when bought. Its not broken, its all just annoying. Also when I right click anywhere on the desktop, in the coloum that you see, I get a link to an adult site, how can I get rid of this?

  I want to thank you for taking the time to read this and would be grateful if you could help.

  Jack.

  Hi Jack,

  I suggest you to check what is actually underway when you start your new A10 using MSCONFIG. This will then stop these tasks that you do not want to be started up and should prevent your error message displayed.

  I also suggest you download and install a copy of AdAware http://www.lavasoft.com (and perhaps also http://www.spybot.info/en/download/index.html SpyBot) and do a check complete of your new A10 to remove any nasties that may be hiding there.

  It seems that if the previous owner has removed some of the software they had installed, but is not completely cleaned afterwards.

  Finally, I personally use a freeware CCleaner http://www.ccleaner.com/ for utility call which is excellent to remove the pieces left over on my laptop. It must be treated with some caution, because it is a powerful utility, but it is very quick and thorough.

  Kind regards

• Re: Satellite L670 - error when starting the BIOS update

  Using the Toshiba Service Station, he warned me an update. The update is called "Satellite L670/L675, Satellite Pro L670, update BIOS Version 1.50". When I install the update, it gives me this error: "there was an error, please check below the elements.» More than 150 BIOS version. Battery capacity more than 10%. AC is attached.

  I tried the update when my battery was 100% and the captain was connected, and yet I still get the error.

  Can someone help me with this?

  Hello

  Firstly I have to say if you don t have any problems with your computer forget this update. BIOS update is required only if you really have problems, otherwise I don't such updated risky.

  Anyway, if you download the update of the BIOS, you will need to extract all files of archive zip first before start you. Also, make sure that you are logged on as administrator.

• Error when updating the Bios Equium A60-155

  Hello.

  Here, I have TOSHIBA Equium A60-155 MODEL No.: PSA67E - 00300C8J

  "I tried to update the bios, follow this thread" [http://laptopforums.toshiba.com/t5/Drivers-and-Utilities/Equium-A60-BIOS-Update-Problem/td-p/99434] ".

  but I got the error, as in the screen:
  [Photo: http://qgwbrw.bay.livefilestore.com/y1pZJ7VOj2nrffkqrqlCXuwOHdILOPKPqWuCT0i3MoAuv6p5QR k1WSwQm3APFZIodBVIdL807fC_a_RAYR79W1XqWSpSh5x9cVw/13072010395.jpg? psid = 1]

  Hello

  Looks like you want to update the Bios back-base. You can download windows-based BIOS:

  http://img830.imageshack.us/img830/7228/78420804.jpg

  Note, updating of the Bios, close all running programs running, including antivirus, disconnect from the Internet. However, if the system works well. should not touch.

• error when updating the BIOS

  I got a HP Pavilion a1542n. So I installed XP SP3, which is done and was trying to install drivers and other things. I went to hp.com, getting to where I can * beep * to this screen to select the Safe Mode, Normal Mode again and again and again.
  Then I tried to reinstall XP, but he couldn't find any partition to install.
  I think that it is a motherboard problem. What can I do, guys?

  Maybe a bad BIOS flash. What version of BIOs you have and which version go you to?

  Have you updated running as ADMINISTRATOR?

  Can also be bad memory.

• Some customers get Error when loading the application #2032

  Hello

  Some of my application users become "Error #2032" while accessing my application. Please help what could be the problem and how to solve it. I saw a few posts for this error and therefore placed a crossdomain in the Web server file, write - use-network = false in the flex compiler, give read/write access to the swf file.

  Always make the same mistake. Help, please.

  Concerning

  Rasmikant

  Hi, I have the same error. Maybe it occurs when flex trying to access an EPIRB and customer have no internet conexion (don't have lan).

  My solution is to compile flex app with code RSL merged, the problem is that incrise the size of the SWF. You can follow these steps:

  1. open the properties of the project

  2 click on Flex build path

  3. at the top, select 'Framework links'->: merger in the code.

  4. click ok and rebuild your app

  5º bin release in export.

  Kind regards

  Pablo Rey.

• Error when running the BIOS update HP Healthcheck: "Code 800A01A8".

  Original title: I am trying to run BIOS update HP Healthcheck and get this error

  I am trying to run BIOS update HP Health check and get this error
  C:\Windows\help\OEM\scripts\HC_VistaSP1BIOSUpdate.JSE
  Line: 458
  Char: 2
  error: object required
  Code: 800A01A8
  Source: Microsoft Jscript runtime error

  Please take a look at this with a Microsoft Fix It tool Microsoft Knowledge base article to resolve this issue.

  You can also take a look at this thread with a similar problem.

• Form factor of the graphics cards that work with the Dell Optiplex 760 desktop computer?

  Hello

  So I recently got this Dell OptiPlex 760 desktop form factor that I really like and I would get a video card for it.

  It's the desktop form factor. The second largest next to the mini tower. There a 240W (or 250?) food I don't want to change. I would like a GPU that works with a supply of 240 w.

  I wish it were less than 60 dollars. I do some light games (Minecraft) and want to join a substantial amount of FPS with this game. Suggestions of the card?

  I'll give you more information.

  It fits into all THE MODELS except the USFF because USFF has no slots.  You will need to remove the flange size and use the version of low profile.

  cs_setInnerHtml ('video_9366bb5b-9fda-4cca-bfea-c4ec470df1e3', ");

  

  

  Maximum power allowed is 25W on low profile units.

  It is also why they Print 25W max on the 16 X video slot.

  Radeon HD 2400 XT 25 W TDP

  

  

  Here are valid Dell Low Profile PCI - e 16 X for this chassis - video cards

  XX347 ATI Radeon HD2400 Pro 256 MB, DVI - I, TV out
  YP477 ATI Radeon HD2400 Pro 256 MB, DVI - I, TV out
  CP309 ATI Radeon HD2400 XT, 256 MB, DMS-59, TV out
  XX355 ATI Radeon HD2400 XT, 256 MB, DMS-59, TV out

  cs_setInnerHtml ('video_af6d7d61-a142-4402-9efd-b4abb192eca2', ");

• If I have a windows vista dell optiplex 760 and 755 and when I reload with windows 7 can't me activation that is legal?

  If I have a windows vista dell optiplex 760 and 755 and when I reload with windows 7 can't me activation that is legal?

  "carlostorresWG" wrote in the new message: * e-mail address is removed from the privacy * _vista...

  If I have a windows vista dell optiplex 760 and 755 and when I reload with windows 7 can't me activation that is legal?

   

  If the machine came originally with Vista, and you charged it with Win 7 disc by the same manufacturer, it will go into a grace period and the non-genuine end - the key used for this installation requires data appropriate to the SLIC table in BIOS in order to activate it.

• I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP.

  Original title: someone help please?

  Working on my old computer, a pentium 4, card mother GA81PE1000, I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP. After so many years, working on the construction of computer & repair, it's new to me.

  So I checked the Microsoft Website for answers from people with the same problem in the past and apply their suggestions, nothing works... hard drive replaced, the changed value in the bios, did everything possible, still nothing works, phenomenal for me, please help me find an answer, thank you?

  Hello

  1. have you made changes on the computer before this problem?
  2 - what you want to say that you receive this error message during the installation of Windows XP?

  Check to see if the following is useful.

  Method 1: Disconnect all devices non-essential connected to the computer and restart. Check to see if it boots normally.

  Method 2: You may need to check the settings of the BIOS (Basic Input\Output System). Check if the hard drive is detected. If this is not the case, check the physical connections. Refer to the manual to check the same.

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  The following article might be useful: "Error loading operating system" Error Message When you restart your computer during installation

• USB key in the machine of W2K3 on ESXi 4 on a Dell Optiplex 760

  I'm testing the new ESXi 4 on a Dell Optiplex 760. In ESXi, I have an Ent W2k3. Machine of R2 SP2 and I want to use a USB device.

  In the config of het windows machine I add the usb controller.

  When I start the machine, I see a 'Remove hardware safely' there is a connected usb controller.

  But if a connected a USB to the ESXi machine it does not appear in the windows machine.

  Should I install additional drivers in ESXi?

  I see if ESXi if he sees the usb ports?

  USB keys are not supported on a virtual computer that is located on ESX/ESXi.

  Incidentally, I don't think not that ESXi is supported Dell optiplex 760... Please see the matrix of compatibility on the VMware Web site.

• (Redirected) doing a full install windows 7 pro sp1 64-bit on my dell optiplex 760 Tower, but even though I have the original disc from dell, I have more questions...

  try to do a full install on my dell optiplex 760 Tower, but even though I have the original disc from dell, I have more questions...  I get all the features and everything all the way to the last step and everything, but then I think it will be a success, it doesn't say windows startup and let me down in me leaving with a blue screen no signal on my LCD 15 '... If someone would have an idea and would be kind enough and generous to help me as a fellow geek... I mean built my first computer, lived the whole 9 yards, but still cannot understand or resolve this situation... I would greatly appreciate any help of knowledge all my colleagues people could give... .i currently do not have a phone, but is will can always happen to me by message on his or [NOTE from the Admin: Email deleted in accordance with the TOU strategy identification], thank you for your time and also gratitude.

  Best of this post in the Forum OS from Microsoft here:

  http://en.community.Dell.com/support-forums/software-OS/f/3524.aspx

  Bev.

• Get the error when loading data into the base cube

  Hi all
  
  I get the error by loading the file of hollow data to the database below.
  Please take suggest me...
  
  I use ESSBASE 9.3.1.3.
  
  
  Error:
  
  Basic charge database
  The Xchgrate database management
  Load the database Interntl
  Sample application loaded - connection established
  Start the application [example] with the process id [1688]
  Empty invalid character in name (E:\My personal Data\Test\222.txt) based on the ESSAPI EssUpdateFile
  Unexpected error Essbase 1030010

  Empty invalid character in name (E:\My personal Data\Test\222.txt) based on the ESSAPI EssUpdateFile

  Essbase has problems with spaces (white space characters) the path names (my personal data)

  Rename your path or move the data file to a location that has no characters/spaces in the path name.

• Reinstalling Windows XP on a Dell Optiplex 760

  Nice day

  I reinstall Windows XP on a Dell Optiplex 760.
  The system came preloaded with it, even if the certificate of authenticity (COA) indicates has a license for Windows Vista professional.
  I'm reinstalling provided factory recovery disc.
  My question is, what to do when it comes to enter a product key? Of course the key to Windows Vista Business will not work. There is none on the system or on the cover of the CD.

  Well, I found the answer, it does not require a product key.