Dell Power Edge R410 & Dell Perc H700 modular F2WGY

Hi guys

Need some advice please, a few weeks ago, we bought a Dell R410. This came with a modular 6/ir Perc. However, when we arrived at the installation of drives we noticed that the controller did not recognize disks larger than 2 TB. It's not good because we need to use 2 x 3 and 2 x 500 GB disks in a RAID 1 Configuration.

After Googling autour, I came to the conclusion that the card that it came with the "Perc 6/ir' does not support disks larger than 2 TB.

So, I advanced and bought a new modular a "Dell Perc H700 F2WGY" controller which apparently supports disks more great.

the controller came yesterday so I removed the old Perc 6/ir controller from the slot in the bottom of the map editing and trendy "Dell Perc H700 F2WGY" modular at the same place. : Photo of slot, I inserted H700

H700 card: see picture

PERC 6/ir map: see picture

Anyway, once I inserted the card and started, I was presented with the error; "PCIE training error" system HALT.

Obviously this would not start any further. So I brought the wrong card? im confused at the moment between modular and integrated? the pcie slot is low for integrated only cards?

I then add the new map on the PCIE Top slot. the system then started and he could see the card. However, it found no readers?

What exactly I do bad will this card work at all? or I'm out of luck and need another card?

Advertisement

Cappilio,

The problem you are experiencing is due to the model of the H700. Map H700 modular version is actually designed for the blade server Poweredge series. The model that you would need is the H700i which is the version that is integrated, designed to go into the white storage controller slot you are talking about. The references are KK67X and CNXVV. The latest model of the H700 is the H700A which is the adapter, it's the model that is necessary for installation in a PCIe location.

This link explains in detail in the overview H700 - http://www.dell.com/downloads/global/products/pvaul/en/perc-technical-guidebook.pdf

Let me know if it helps.

Tags: Dell Servers

Similar Questions

  • DELL perc h700 battery replacement, please help

    1. where to buy, and what exact model battery... is there a link please if you :)

    2. how to replace it? a guide to how to do it.
    Needs a power Server? Or can you replace it while the server is running?

    3. If I replace it, do I lose my config, configuration raid and other things, as if you take the bios battery, you lose all the config...?

    Thank you, hoping that someone will help me out here, its my first time changing battery...

    BrownGhostDK,

    You can go to Dell.com site and search for the part number 312-0448. This is the same kit for the Perc 5.6. and h700.

    To replace it, you will need to turn off the server and unplug the power cord, then hold the power button to drain flea power. After that then just remove and replace the battery. Power back up normally. The configuration is stored in the controller and will not be lost by replacing the battery. The main role of batteries is to provide the power required to save the data from the cache when the server goes down.

    I would like to know if that helps...

  • Batteria PERC H700 Poweredge T610 [MS]

    Buongiorno

    avrei need by UN nostro recent batteria del PERC H700 integrated su UN PowerEdge T610 Service TAG

    avrei need di one ' offer is there prima possibile procedere con the price by.

    Grazie

    Massimiliano

    Buongiorno,

    Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

    By the spedizione:
    1. company name:
    2 address:
    3 City:
    4 Provincia:
    5 cap:
    6 name/last name/number phone/e-mail del referent in loco:

    With the fatturazione
    1 nome società:
    2 via:
    3 City:
    4 Provincia:
    Heading 5:
    Name/last name/number 6 telephone/e-mail del referent by the fatturazione:
    7 partita IVA

    Speaking saluti

    Manual

  • DELL Power Edge 2950 Memoria [Admin NOTE: maintain the label removed in accordance with the TOU strategy]

    Boa look forward - cotacao solicito para Memoria DELL Power Edge 2950 [Admin NOTE: maintain the label removed in accordance with the TOU strategy]

    sofiamaia

    Boa look forward - cotacao solicito para Memoria DELL Power Edge 2950 [Admin NOTE: maintain the label removed in accordance with the TOU strategy]

    sofiamaia

    For prices and availability of parts and upgrades for this system, you must call 1-800-357-3355 and the serial number available.

    http://Accessories.us.Dell.com/SNA/ProductDetail.aspx?c=us&l=en&s=DHS&CS=19&SKU=D558C&mfgpid=167754

    Bev.

  • Dell Power edge 2850 will not let me install windows server 2003

    Hello

    I tried to install windows server 2003 on a few servers, I received a few weeks back.  The RAID put a system in place and turned but when it tries to install WS he says that there are no hard drives.

    I tried to download "server Dell Power Edge update through bootable media / ISO ' but there is no download for a 2850.

    Also I tried to download this "Dell systems build and Update Utility" but most of the time it stops and says failed download...

    Hello

    Also visit this link

    This link is the user's guide.

    And another one

    I bought a 2950 on Ebay the month last but never had the intention on the installation of a Windows operating system, but I downloaded the ISO of DVD here file and installed without any problem they send you a key to save the operating system. I updated the bios after this and no problem. You never said how many hard drives you have, but make sure that you have two or more. So far, I've installed VMWare ESXi which was supported on 2950 but I settled with XenServer 6.5.0 and I 2003 server running as a virtual machine which works very well.

    I have a Dell XPS workstation I have recently reinstalled Windows 7 on it but I had only one drive is connected and the operating system could not see all of the hard drives. After that a second device and do not use raid on this machine, I was able to install Windows. I tried the ISO Live Dell 2850 version but it is not a. Which includes diagnostic tools. When you by a Dell there pre installed in a hidden partition on the disk utility, you can run, but it really isn't anything I know install that. Usually the F12 key will give you a list of items to boot from and if she isn't here the disk, it cannot run. The diagnostic utility that is.

  • Dell Caddy tray part number: N6747 can be used with the hard disk Power Edge 840 cage.

    I have the hard drive Dell 840 cage and want to buy some caddy tray. I do not know caddy number part of the plateau of the N6747 can be support for Cage Rack on Power Edge 840.

    Thank you.

    D962C for D981C for SAS and SATA part number are what you want.

  • 2970 2012 on Dell Power Edge Server installation

    Hi all

    I am trying to install Windows Server 2012 on a Power Edge 2970.  I use the Dell Windows OS track install Support Pack Dell system Build Update Utility but then when I get to the media Server 2012 install it loads but then bird missing a driver error.  Installation cannot continue.

    Can someone please provide suggestions or ideas?  I have a Server 2008 R2 running on Dell Power Edge 2970 system.

    Thank you

    Ron

    SBUU what version do you use?  You should use GDPS (systems management tools and Documentation) 7.2 or later version, not SBUU.  Have you tried to install directly from the Windows support?  What is the EXACT message that you receive?  Note that the eccentric the 2970 chipset will probably require allows you to load the driver during installation if you are using a CD/DVD drive.  Installation of USB will avoid this scenario.

  • DELL POWER EDGE R310 [FG]

    Buongiorno

    Avrei need di UN preventivo per UN alimentatore (ricambio codice: R109K) by he server power edge r310 (service tag: ).

    Grazie

    Buongiorno,

    Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

    By the della spedizione parte o intervento del tecnico on site:
    1. company name:
    2 address:
    3 City:
    4 Provincia:
    5 cap:
    6 name/last name/number phone/e-mail del referent in loco:

    With the fatturazione
    1 nome società (is it client code):
    2 via:
    3 City:
    4 Provincia:
    Heading 5:
    Name/last name/number 6 telephone/e-mail del referent by the fatturazione:
    7 partita IVA

    Speaking saluti

    Fabio

  • Install ESXi on a USB key Dell Power Edge T310 5.0

    I would like to know if anyone has tried to install ESXi 5.0 on a USB key with Dell T310? Advantages and disadvantages?

    The system is not for production only for the test, I would save some costs and only get 2 hard drives to store data

    Thank you!

    Daniel.

    Hello

    Daniel Berneling says:

    I would like to know if anyone has tried to install ESXi 5.0 on a USB key with Dell T310? Advantages and disadvantages?

    The system is not for production only for the test, I would save some costs and only get 2 hard drives to store data

    Thank you!

    Daniel.

    Yes it has an internal USB slots (2) and Dell Power Edge T310 is the HCL just check your CPU

    People had a lot of problems installing ESXi4 on boxes, but it is associated with RAID controller driver.

    This should be included and sorted on ESXi 5: see http://communities.vmware.com/thread/243513?start=15&tstart=0

    I use a HP Microserver with ESXi 5 fortunately boot from USB

    Please allow points if it is useful/correct

    Added the: you can download the Installable ISO from Dell on specific ESXi from the Dell site

  • REFERENCE DELL UEFI/GPT R310, PERC H700

    Hello (or rather the night).

    I have a dell poweredge R310 (with PERC H700) server and 3 hard drives.

    The first two are the storage on SATA drive with a capacity of 3 TB (each 6 to total) this operation of RAID 1.

    The third is a 64 GB SSD for boot into the operating system (I chose to set up Debian).

    I read a few topics who insist to start using UEFI and put the storage disks to GPT for the OS can fully recognize.

    If I could access the UEFI interface, with the configuration of raid PERC H700, but I can't find any indication of the GPT.

    How can I go about it, is that I missed a step?

    Hoping that someone will help me :)

    No, TPG is a function of the operating system, NOT the hardware, so if the PERC does not recognize the full capacity of disc, then either your H700 firmware is old (> 2 to support has been added in the second update of firmware for this card) or the drive is not compatible.  What make and model are you using?

  • For Dell Power Edge R420 RAID management software

    We have server Dell Power Edge R420 (RAID enabled). We 4x300GB SAS hard drives on the server, but it has no application to manage the RAID for Windows Server R2 2012 So failure how could we not what HARD drive crashes.

    Hi akshay03

    There is a software called Open manage server administrator who allows you to analyze the server hardware.

    Here is a link for OMSA ver 7.3 http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/poweredge-r420?driverId=CWHRG&osCode=LHS64&fileId=3267736217&languageCode=EN&categoryId=SM

    Let us know how it goes.

  • DELL PowerEdge R710 and PERC H700 RAID driver for WIn 2008 Std

    Hi all

    I have a DELL PowerEdge R710 with a controller RAID PERC H700.

    I try to install Windows 2008 Std 64 bit, but I can't find the driver. Even for the site web at support.dell.com. Can someone help me.

    THX in advance

    Even if you use a driver of 2008, it should at least recognize it, then you must be using the wrong driver or something wrong :)

    If you are installing 2008 R2, make sure that you use this file:

    If you install 2008 x 64, make sure that you use this file:

    With one, you must first unlock the .exe (right click on the .exe, properties, unlock), unzip / extract the files (run it and make a note of the default location), and then copy the 4 files on a CD, USB, etc., then when Windows tells you that he is not all hard disks, click on the link drivers load below to load the drivers from the media you have chosen.

  • Drives 3 TB for DELL PoweEdge R510 with PERC H700 Controller

    Good afternoon.

    Currently, we have 8 x discs 1Tera in our PorwerEdge R510.

    -1 RAID 1 for the first 2 discs, which have the operating system (Windows Server 2008)

    -1 RAID 5 for the other 6 disks

    We strive to upgrade our RAID 5 with new disks of 6 x 3 TB.

    The problem is OpenManage pointed out that the discs that we inserted the 2 TB, and the State is "unsupported".

    Screenshot:

    Status Name State Predicted failure Certified Bus protocol Media Capacity Used RAID disk space RAID disk space Hot spare Negotiated speed Speed measure SAS address
    Status: No reviews Disk physics 1:0:4 Not supported NO. NO. SATA HARD DRIVE 2 047,38 GB 0.00 GB 2 047,38 GB NO. 6,00 Gbps 6,00 Gbps 4433221103000000
    Status: No reviews Disk physics 1:0:5 Not supported NO. NO. SATA HARD DRIVE 2 047,38 GB 0.00 GB 2 047,38 GB NO. 6,00 Gbps 6,00 Gbps 4433221102000000
    Status: No reviews Disk physics 1:0:6 Not supported NO. NO. SATA HARD DRIVE 2 047,38 GB 0.00 GB 2 047,38 GB NO. 6,00 Gbps 6,00 Gbps 4433221101000000
    Status: No reviews Disk physics 1:0:7 Not supported NO. NO. SATA HARD DRIVE 2 047,38 GB 0.00 GB 2 047,38 GB NO. 6,00 Gbps 6,00 Gbps 4433221100000000

    The PERC H700 firmware is:

    Firmware version

    12.0.1 - 0091

    Driver version

    4.31.01.64

    Version of the Storport driver

    6.0.6002.18005

    Do you know why this phenomenon occurs? Do we need to do a Firmware Update for the PERC controller? If so, this will delete RAID 1, OS disks?

    Thank you in advance for your help!

    See you soon.

    If you change to UEFI, you will need to reinstall the operating system. UEFI completely changes the way the operating system reads the system hardware, so there is not a way to avoid a reinstallation.

    The firmware update will not affect the RAID array.

  • Reference Dell PERC H710P: Firmware hangs on Windows RTM 8.1 with the default driver

    My H710P Dell (with the last FW A04) PERC was working completely fine with the driver 5.2.220.64 on Windows 8, until recently, I tried installing Windows RTM 8.1 on the machine, it caused hang FW at the launch of the Windows installation:

    266 [Information, 0] 05 seconds restart Controller ID: 0 edge revision: A01 1367
    261 [Information, 0] 05 seconds restart Controller ID: 0 Package version 21.2.0 - 0007 1366
    141 [Information, 0] 05 seconds restart Controller ID: 0 battery present 1365
    1 [Information, 0] 04 seconds restart Controller ID: 0 Image version: 3.130.05 - 2086 1364
    0 [Information, 0] 04 seconds restart Controller ID: 0 has started the initialization of the Firmware: (PCI ID 0x5b / 0x1000 / 0x1f31 / 0 x 1028) 1363
    15 [Fatal, 3] 2013-09-11 21:00:27 Controller ID: 0 Fatal firmware error of: line 1232 in... /... /RAID/1078dma.c 1362
    15 [Fatal, 3] 2013-09-11 21:00:27 Controller ID: 0 Fatal firmware error of: line 1232 in... /... /RAID/1078dma.c 1361
    15 [Fatal, 3] 2013-09-11 21:00:27 Controller ID: 0 Fatal firmware error of: driver has detected possible FW, FW to stop blocking. 1360
    389 [Information, 0] 2013-09-11, 20:57:11 Controller ID: 0 host driver is loaded and operational 1359
    44 [Information, 0] 2013-09-11 20:56:33 Controller ID: 0 time established for power: time 2013-09-11 20:56:33 34 seconds 1358

    Windows 8.1 was delivered with the version of the downloadable 6.801.5.0 driver from Dell, I also tried and committed in my opinion the FW even hanging the question.

    I'm afraid - anyone know what is happening?

    See you soon

    Chris

    Appearantly this is related to the latest driver from Dell. I've found a workaround, but it's a bit complicated:

    1 connect a USB stick which is big enough

    2. install Wndows 8.1 on the * USB drive *.

    3. start Windows, and then remove the current driver and install the previous driver for Windows Server 2012.

    4. use the 3rd party software (say that Ghost) to copy the windows from USB drive to VD on Dell PERC H710P controller.

    5. start Windows in the USB drive again and use 'bcdedit' to clean boot stuff

    in any case, I'm LSI 9361-8i, so it won't be a problem for me in the future...

  • Reference Dell perc h800

    Hello everyone we recently bought dell precision t7600 and perc h800 map for

    control of Keystone md 1200 powe... Win server 2008 r2 is installed but no driver work for dell perc h800 tried so site Web of frim dell drivers but still no hope... am wondring if anyone can help me... Thank you

    http://www.Dell.com/support/drivers/us/en/04/DriverDetails/product/PowerEdge-T710?driverId=W7X7H&osCode=WS8R2&FILEID=3176115748&LanguageCode=en&CategoryID=SF

    Since you're under 2008 R2, you might be able to run the Package version of update for Microsoft Windows, but since 2008 R2 is not supported on the T7600, it may not work properly, then you can try the hard drive version.  Since the H800 is not supported on the T7600 at all, it is possible that none of the Dell drivers will work.

Maybe you are looking for