Dell PowerEdge R710 with windows server 2003 R2 is not start windows in normal mode.
Dell PowerEdge R710 with windows server 2003 R2 is not start windows in normal mode after upgrading the RAM to 64 GB.
Arrangement of RAM is made 4 our 16 GB of RAM on 2 channels. I get no error message about the RAM configuration. It is booting in safe mode but not start in normal mode, his hanging during windows startup.
Please give me guide to solve this problem.
I thank & regards
Thanks for the reply.
My version of windows is 32-bit Windows server 2003 Enterprise Edition Service Pack 2.
Although I have not tried switching/EAP, I will try that and get back to you.
And again something I have an idea of the installation of windows server 2008 R2 Standard version on this server, it will support? Please let me know Chris.
Tags: Dell Servers
I have a DELL PowerEdge R710 with a controller RAID PERC H700.
I try to install Windows 2008 Std 64 bit, but I can't find the driver. Even for the site web at support.dell.com. Can someone help me.
THX in advance
Even if you use a driver of 2008, it should at least recognize it, then you must be using the wrong driver or something wrong :)
If you are installing 2008 R2, make sure that you use this file:
If you install 2008 x 64, make sure that you use this file:
With one, you must first unlock the .exe (right click on the .exe, properties, unlock), unzip / extract the files (run it and make a note of the default location), and then copy the 4 files on a CD, USB, etc., then when Windows tells you that he is not all hard disks, click on the link drivers load below to load the drivers from the media you have chosen.
We currently have a Dell PowerEdge R710 with 6 SAS das drives configured in a RAID-1/RAID-5 configuration. A drive is configured as a global hot spare. I would add this spare drive in the RAID-5 table, where some virtual machines live, to recover additional space. Has someone managed to do this? Is the only way via the PERC BIOS management utility?
I'm not part "raid-1/raid-5. But assuming that the table is raid-5, then yes it is possible and yes the BIOS utility is necessary. The hot spare is currently set should be removed from this role, then added to the existing Bay raid-5, but without the ability to select increase. This will create free space on the raid-5 array on which then a new logical volume can be created, which will be then seen by ESX as a new drive and therefore another data store can be added to this (or it can be added to the first as a measure). HTH
Please give points for any helpful answer.
My Dell PowerEdge R710 is seen 16 GB (4x4Go) now and would like to add 64 GB (8x8Go), it will be total 72GB. Please help me add memory into the slot on the right. Can I do the following as below
A1/B1 > 8 GB
A2/B2 > 8 GB
A3/B3 > 8 GB
A4/B4 > 8 GB
A5/B5 > 4 GB
A6/B6 > 4 GB
Thanks Robert, I already bought 64 GB (8x8Go) and would like to add to my current server which is running 16 GB (4x4Go). So, please show me how.
I have a cluster of ESXi 4.1 six-host running on Dell Poweredge R710. They start from a USB key connected to an internal USB port. I did at least 12-20 installs on the same hardware without problem.
When I try to re - install on the single ISO ESXi 4.1 host via the iDRAC, the installation fails when loading install.vgz with the error message: "Booting: MBI = 0x000100c0, enter = 0x0040024a.
I studied the two codes and the only suggestion that I get, it's that my hardware is not supported (specifically that my 32-bit processor is not supported). I do not have a 32-bit processor, so I know that I can surrender. I downloaded the CPU VMware ISO (file:///C:/Users/pguarco/Downloads/VMware-CPU-Compatibility-e.x.p-160658.zip) compatibility, and my CPU meets all requirements. Previous installation of ESXi host crashed for unknown reasons, where the re - install. It is possible, that there is a hardware problem. Any ideas on how to limit this problem?
you are doing the right thing. only thing I could thing is bad ISO, (Please make sure that the checksum is correct). and the worst case material PE firmware update.
Reference Dell vostro 1520 with windows xp prof... Unable to read & play any cd/dvd.tried mr.fixit content but no solution at the moment.
1 have. what fixit you tried?
2. don't you make changes to the computer before the show?
Your CD or DVD drive is missing or is not recognized by Windows or other programs
Important: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in the window.
I have a problem to connect to a running with Win Server 2003 Net Office job, my OS Win - 7 professional 64-bit desktop above. Then the system Win-7 sailed into this network and integrated into the field of the system? are there procedures that could help maintain the system in his?This issue is beyond the scope of this site (for consumers) and to make sure you get the best answer, we need to ask either on Technet (for IT Pro) or MSDN (for developers)
If you give us a link to the new thread we can point to some resources it
My new DELL Inspiron 560 with Windows 7 (64 bit) works very well with my all-in-one HP C7280 printer except the scan function. I tried and tried to get the correct driver, but all I get is "no scanners are detected." Any suggestions? I would appreciate your help! Thank you very much!
E-mail address is removed from the privacy *.
Have you downloaded and installed the "Full Feature software and drivers" HP at: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&os=4063&product=3204785
If this doesn't fix the problem there is a HP Scan utility of diagnosis that can help and it is available for download on the same link as above.
How to enable bluetooth in dell vostro 1015 with windows 7 starter 32-bit?
[Moved from comments]
It would take a special function key to turn on the Bluetooth on the computer. You can consult the computer manual or contact Dell for the same thing.
In addition, you can view the article-
To let us know.
I work in the field environment.Some VB 6 EXE compiled on the server (MS Server 2003) files does not work after restarting Windows 7 PC (shortcut to the server).but it runs on the Windows XP computer.For example:-Inventory.exe (work), Sales.exe (does not work)Help, please.
I suggest you to ask your question at the following link.
I would also ask you to contact your IT Department for further explanations.
I have the software for my Dell 720 printer, but it will not install on my new Dell XPS 8500 with windows 7. It works fine on my Dell Dimension 3000 with windows XP. I would use this printer with my new system
Dell is not a Windows 7 driver for this printer. The closest thing they have is a driver for Vista 32 bit. So your options are to (1) Download 32-bit Vista driver and try to install in compatibility mode, (2) use XP Mode if you have the professional or Enterprise version of Windows 7 Ultimate, (3) buy another printer.
You can download the Vista 32-bit driver
I need the video/display drivers for my Dell Inspiron 6000 with Windows 8. Laptop is the Intel Pentium M processor 2.00 GHz RAM, operating system, 32-bit on x 86. My resolution is not at the right level and videos have hard play.I went to the ATI site and when I try to download their drivers, they will not be installed because they do not recognize the Windows 8 operating system. The site of Dell's Windows XP operating system.Thanks for any help.[Moved from comments]
Resolved - finally2 essential steps1 https://support.dell.com/support/topics/global.aspx/support/kcs/document?c=us&l=en&s=gen&docid=DSN_179256&isLegacy=true#Issue5Reconstructions of Dell should be loaded in a particular order until the drivers are installed, that is to say the controllers then the drivers for the chipset and resolution etc. They are specific to this.then;2 CharlesGrimes comment '... ". searching on my computer for the Dell under the old windows files and the old drivers were loaded. "I had tried this but not good. So went into a ghost of Dell image when the resolution was good on Win7, recovered files in windows/System32, which has old drivers. Does the update in graphic cards [Device Manager] driver and manually looked through above the files recovered from previous instal win7 and YES they charge this time.Oh what a relief to have a higher resolution. Experience had taught me how snappy Win8 is, I picked up a shortened bunch of ways to circumvent the operating system, and it is growing on me. WIN8 Pro works best on this old machine than its original Home XP and Win7.Thank you Carlos and others for your info that led to my positive resolution.
When Windows 7 stops without warning I have to restart even if the protection of the system is checked for an automatic restart.
When I reboot I get the black screen asking if I want to start in safe mode, because Windows was not shut down properly. I usually start it in normal mode and it works very well.
This occurs on average about once every three to four weeks and can be at any time, that is to say that I might be in Outlook, Word or surf the net, etc.. I do not make any game.
Can you help me
Thank you our writing about Microsoft Community.
There are various reasons that can lead to random the computer stop. Heating, hardware problems and an outdated version of the BIOS are some of the main culprit.
I would ask allows you to check if the computer is getting overheated while it shuts down.
To check for hardware problems, I would recommend that you run Dell Hardware Diagnostic tool.
For more information on Dell Hardware Diagnostic tool, please see the link below.
Obsolete BIOS can also cause computer to stop randomly, depending on the version of Windows installed on your computer, please download and install the latest firmware of the BIOS from the link provided below.
BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
Please let us know the State of the question, so that we can help you further.
Win Server 2003 SP2. Backup starts and see errror message "error returned while creating the volume shadow copy: 0x8004230f.» All solutions? CPP, Volume Shadow Copy Stallion are started.
Thank you for visiting the Microsoft answers community.
The question you have posted is related to Windows Server and would be better suited in the MS TechNet Windows Server Forum. Please visit this link to find a community that will provide the support you want.
Hello. I am looking for some info on RAID usage with SSDS on our server:
Dell PowerEdge R730
1 GB for the PERC RAID controller cache internal H730
200 GB Solid State Drive SAS mixed use MLC 12 Gbit/s, 2.5-inch
OS Windows 2008 R2 (for now)
We would like to know if it is supported to use two SSD drives in a RAID 1 configuration.
What are the risks?
Suggestions for others / the best solutions?
How the controller or the handle of the Garbage collection, Trim and other techniques SSD SSD?
Are there solutions in place for Wear leveling and how do they work?
What are the methods of protection for the I/O failures for these SSD drives and / or PERC controllers?
I hope you can answer (some of) the issue or point me in the right direction for some Dell documents on this subject.
Yes, you can use SSDS in RAID 1.
The controller supports the TRIM and cancel orders mapping. SSD MLC are grade consumer SSD which will not have the life expectancy of SLC.
Maybe you are looking for
Since the upgrade to Firefox 8.0.1 for two days I get this error message on 80 percent of the addresses I try to access: Server not found Firefox can't find the server at orders.tigerdirect.com Check the address for typing errors such as ww.example.c
Last Thursday, I got the iPad 9.7 Pro. Yesterday, I noticed that there is an internal rattling noise. The mute is on - keyboard sounds off the coast. This looks like a fan or a CPU running. Chatted with support and and they suggested to make an ap
HelloOn the web I found that the A60-762 includes a WiFi when I bought it I have not found the WiFi switch. Instead, I found a closed black plastic cover. could someone tell why? Thank you very much
In the five years I had my Macbook Pro, I solved my problem of disk space by upgrading the hard drive: 256 G - > 512 G - > 1 T. Now I need to replace it, and 1 t SSD are a little expensive for my taste. So, I'm in downsizing mode, in order to get u
I need to change my internet browser for Secunia PSI - it is to make changes to the registry. As I am a PC-numpty (a technical term) an expert on the PSI forum gave me a walkthrough. The first step is to back up my registry. I back up my laptop every