Dell Precision T3600 problem with feedback headphones

Similar Questions

• x 8 connection distance MXI causes conflicts with my on my Dell Precision T3600 PCI slot

  Hi all

  The easiest to say is that I am migrating from a x 4 MXI explicit connection to an x 8 MXI express connection and when I do I get an error on the motherboard which is unable to load the single PCI slot.

  Error in WIn7 64 bit Device Manager reports a yellow exclamation point

  Device "Intel (r) 82801 PCI Bridge - 244 properties"

  The error listed in the device status box: "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  Unfortunately, I need this slot machine to run a card calendar to conjucton with PXI hardware. There is no anomaly when I used the x 4 connections with virtually the same loadout except for one Exchange a PXI-5122 (x 4 config) to SMU 5122 (x 8 config).

  If I leave the MXI PCIe card in but do not connect to chassis PCI slot SMU (and the fine card appear.)

  If I remove the PCI card into the slot, the error still occurs.

  I swapped the x 8 card and NVidia graphics card without success (the 16 x only two slots).

  I photographed the reader and removed the H310 Dell PERC RAID card and charged the RAID array RAID integrated Intel C600 and still no change.

  I have updated BIOS to A07 to latest A08.

  I updated the Intel Chipset at the latest on the Dell Web site.

  I guess that I just wonder at this point if someone is able to run a x 8 MXI express at SMU with a Dell Precision T3600, T5600 or a T7600 chassis.

  PC - Dell Precision T3600

  Windows 7 Enterprise 64-bit SP1

  3.2 GHz Xeon 6 core (E5-1650) w 16 GB of DDR3 memory

  Reference Dell PERC Raid (x 8 PCIe) H310 / C600 onboard Intel RAID

  Nidia Quadro 600

  2 x 1 TB SATA drive (mirrored)

  SMU Rack - OR 1082

  Slot 1 - SMU - 8381

  Slot 2 - OR SMU 5122

  Slot 3 - NOR SMU 5442

  Housing 4 - OR 4 to 6 TB RAID NI 8262 x MXIe

  Housing 5 - PXI 6733

  Housing 6 - PXI 6733

  NI MAX report is attached as a text file.

  After much work by NI Applications Engineer Kyle K, this problem has been resolved.

  I'll post the solution to this PC dependent problem here, just in case it will help others in a similar situation.

  It seems that Dell sometimes uses one default BIOS quite restrictive on the number of PCI bus in these (and other). By allowing several PCI bus, you will be able to list all the devices in the sacrifice of some memory available for OS 32 bit running on 4 GB of RAM. No problem for me because I'm under 64 bit OS.

  Congratulations to Kyle even if he has not posted here yet for him give real congratulations.

  Greg

• Dell Precision Workstation 690 with Win7-64 final. -3 TB hard drive?

  I have a Dell Precision Workstation 690 with Win7 64 Ultimate installed.  I want to use a 3 TB drive.  How will I know if the SATA controller is compatible with a 3 TB drive. ???

  How to know what Board motherboard or the SATA controller module I have?  When the computer starts first the BIOS detects SAS 5 Host Bus HBAO (?)  I forgot the exact name of disks while he finds the SATA drives.

  Greetings Tenoc,

  Thanks for posting your question on the community.

  The integrated SAS controller that comes with the Precision 690 name: 1068 LSI PCI - X - SAS 3 Gb/s controller. He is old enough, at this stage, and I'm sure that it only supports MBR (limit UP to 2 TB).

  You can try adding in a newer card, like the Perc H710. Not sure if it works or not. There are various other cards you might try there.

• Y510P problems with plug headphones

  Hello. Unfortunately, this is my first post on the forums of Lenovo.

  I bought Ideapad Y510P this week and here I first problem with it. This is a new computer, was only transported in the car, laid flat in his box. Today was the first day I tried connect headset.

  When I plug them in at bottom right part just works. The left side is all silent. When I try to hook them up slowly, only left side works until I plug them all way in and only the right side then gives sound.

  When I plug my headphones to halfway in (very difficult to achieve and the plug won't stay in all), both parties give sound properly.

  Tried it with 3 different working pairs of headphones.

  Check all the drivers (Realtek HD Audio) and it works. The work of speakers, wonderfully, only the headphone gives me problems.

  What could be wrong?

  I must say that I was pretty desperate.
  The laptop was taken instead I bought in and replaced by a new because it was within a week of purchase.

  The service said it was a problem "integrated", coming from the product being badly done.
  I wish I have a better solution for the Rangers, but the subject is now ready to be closed that I have a new thing.

• Problem with plug headphones Envy 15-j035

  Hello I have a problem with my laptop when you use regardless of the helmet on the speakers. During the singing of other frequencies are partially cut, so when lisstening to some song then the volume varies continuously with the voice singing is amplified and when there is no song then the music played is normal. I tried to get him dirty with beats audio setteings turnde them on and again but still the same problem. Very annoying. Is it possible to uninstall the drivres copletly because I think pilots own beats and intels together to ruin everything. Also devices audio bluetooth are not working only some comes from its cracing. I Heve tried windows media advice but they don t allow. Also I have the latest HP drivers and using the update of victory. 8.1.

  Waiting for response.

  Hi Ahvipardik,

  I understand you're having audio problems with your HP ENVY 15-j035eo laptop. This package contains the driver which allows the Audio IDT high definition (HD).

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124012-1&cc=us&DLC=en&LC=en&OS=4158&product=5451062&sw_lang=

  I hope this helps.

  Thank you.

• Dell Inspiron 1501 - problem with 8 GB of RAM

  Please help me:

  I had 2 x 2 GB Apacer RAM sticks, I wanted to switch to 2 x 4 GB Crucial. But after starting, I had problem with the noise and the lines on my screen...  I also tried 2 + 4GB mode, everything works fine, but reference Everest has shown not as good results in 2x2gb mode. What should I do to make it work with 8 GB of RAM?

  My specs are: Windows 8 Pro 64-bit, 263 BIOS, AMD Sempron, 2000 MHz, 480 GB of SSD Kingston, ATI Radeon Xpress 1150, last possible (10-2_legacy_vista32-64_dd_ccc) graphic card driver

  No, there are a few users of Inspiron 1501 with 8 GB here in this forum...

• Problem with microphone headphones

  Hello

  I've upgraded to the last build number yesterday (23.4.A.0.570) after that when I call, my microphone head set does not (Sony MDR-XB50), but no problem when someone calls me.

  I checked with different helmets, the same problem exists.

  Using recordeing voice programs and also my phone diagnostic tools, I tested the microphone of the headset and it works fine.

  Please let know us, as this question is very annoying because I use this phone + head to go on a good number of Conference calls every day.

  Waiting for your kind response,

  Kind regards

  @Farideddin

  Check this

  http://talk.sonymobile.com/T5/Xperia-Z3-Z3-dual/Z3-dual-headphones-microphone-issue-5-1-1/m-p/102618...

• Dell Precision 5400 - Problema aggiornamento firmware RAID LSI Logic for Dell SAS 6 iR controller

  Assistenza Tecnica Dell company,

  only recently ho avuto disco SAS Seagate Cheetah 15 K, pertanto it SAS controller mi segnalava che degradazione of the proclamation of the United Nations of the UN problema del Volume sul quale era misconfigured it suddetto disco.

  Ho labor-intensive UN uguale disco, stessa marca e modello e versione firmware (S527) di quello nel present RAID 1, recoupling the configurazione del nuovo volume non e consentita, perched there controller individua it firmware del nuovo disco como S52A instead S527, come scritto anche nella targhetta present sul disco stesso.

  Conseguentemente, pensando che if trattasse di one problema al legato firmware led controller (SAS 1068E FW 0.20.48 - IR) sono stato web sulla pagina Dell, del supporto relativo al oggetto Office (serial number: ), ho aggiornamento di downloaded it pilot, my film camera durante he message:

  SASDupie.exe-> ' Impossibile find it punto di ingresso RegDeleteKeyExA della procedure nella libreria di special dinamico ADVAPI32.dll.

  A seguito di this error the TR sommergibili interrupted e quindó non e possibile procedere con controller aggiornamento del firmware del.

  In attesa di una risposta in merito, Corinne occasione per porgere Web saluti.

  Antonio Morrocchesi

  Buongiorno,

  questo forum e exclusively by server and sistemi per ricevere assistenza by it is reported (Precision Workstation) is University 02 57782690 lo.

  Speaking saluti

  Manual

• New Dell Inspiron 1764: Problems with signal low connection to wireless networks.

  I have a new laptop Dell Inspiron 1764 I received on 25 June. It is "replace" a Dell Inspiron 9100, who has learned to be too slow and too bulky for my needs. For the purposes of support, the two laptops are running on Windows 7.

  Overall, I love my new Inspiron 1764. However, I noticed the connection/signal strength seriously degraded, with wireless (Dell Wireless 1397 WLAN Mini card) card, compared to my Inspiron 9100 (Dell Wireless 1350 WLAN Mini-PCI card).

  In areas of my home that my 9100 can obtain the power of the complete signal (5 bars), my new 1764 bars 2 or less. This behavior is not as limited to only my house as I have tested in my work and in an area of less than 10 feet away from the wireless router, I have 'Internet connectivity problems.

  I tried twice this morning talk with Dell technical support. The first person I talked to tried to be helpful and initiated at least a DellConnect session with me so that he can check out some of my settings and such (However, why they went twice in my sharing settings I could not determine as they have absolutely nothing to do with the intensity of the signal).

  Unfortunately, I was disconnected from the session when I went to a place that had less signal than just next to my wireless router.

  I then go on the chat support with Dell and received another technician to speak with. I explained my problem, told them that I was in a DellConnect session with the other technician, and they looked to the top of my support contract.

  They then told me that my warranty does not cover software issues and referred me to the software Department and said it would be a supplement. I told them that I did not believe that it is a problem of software in any way, shape, or form. They told me that it must be a matter of adjustment. I spent several hours scouring the internet forums on Dell and other sites check those who have had similar problems. Some of their questions were certainly the software settings, but I still don't yet to find anything that tells me I have an incorrect setting of software.

  So far, I'm standing in my kitchen, tapping on my Inspiron 9100 with a full 5 bars, while my Inspiron 1764 is sitting next to me with a skinny 2 bars, and I am literally standing 7 feet above the room which houses my Linksys WRTU54G-TM router.

  Personally, I suspect a faulty wireless card, but how to convince Dell to hear my case and replace it instead of trying to bilk me for support of useless software?

  I hope Dell Tech Support bed actually this post, or people with the same problem can Dell refer to my previous post describing the problem and the fix.

  It IS a PROBLEM of MATERIAL WITH the ANTENNA, AND VERY PROBABLY THE DIFFERENCE BETWEEN a DECK CONNECTION at the ANTENNA of the PLATE, from connections TAPE FOIL INDIVIDUAL at the ANTENNA of the PLATE, THAT DELL MUST HAVE RESPONSE BETWEEN WHAT MINE PORTABLE has BEEN CARRIED OUT AND THE SPARE ROOM WAS MADE. THE PROBLEM IS NOT SOFTWARE, PROVIDER OR ROUTER, IT IS THE PLASTIC WITH THE ANTENNA CASE!

  Dell is in fact losing more money with the hours of technical support through software patches and sending technicians with new wireless cards that does not solve the problem. They need to send and replace the plastic case behind the LCD screen with the updating of antenna and connections.

  Good luck!

• Dell Latitude E5500-problems with the IDT audio driver

  Hi all!

  I use Windows Vista 32bits on E5500 and everything works fine with the big exception of the audio driver. I used the latest version for this laptop which is A15, no other versions are available on the downloads page. The pilot is very unstable and crashes all the time. Pressing the sound keys does not change the audio levels instantly as expected. There is a noticeable delay in the volume control after I pressed the button. A few 4-5 or more seconds after I press Volume upwards or downwards until the press is registered. A very weird situation and nothing helped so I deleted the audio driver of Dell. I use the default Windows driver now and so far everything is ok.

  Everyone has experienced a weird behavior like this on the same computer laptop? Do you know where I can find an old audio driver for E5500 so I can test again?

  As the system software Dell-is important on the audio system or not so. I installed it after a recommendation in the audio FAQ here on the forum. Thanks for all the tips!

  Pandorum

  old audio driver for E5500

  Very good selection here

  http://downloads.Dell.com/published/pages/latitude-E5500.html

  All most recent drivers dated IDT must be removed from the hard disk or at least the drivers folder before installing an old date one.

  Pandorum

  As the system software Dell-is important on the audio system or not so.

  With the Intel chipset driver, was important for XP, not important for 7, but not sure about Vista.

• Reference Dell EQL PS4100xv problem with MS SQL replication

  Hello

  I have a Dell PowerEdge server R420 connected to an EQL. Is installed ESXi 5.1 U1 (free version). It is only a data store.

  VM is running Windows 2008 R2 STD with MS SQL 2008 R2 STD. The change in size of database per day is around 2 to 3 MB of base on my daily full backups via the MS SQL backup.

  However, when I throw a replication session between my EQL PROD and DR EQL which size of delta is ranging from 1 GB to 50 GB every time that I run a replication? Interval is about 5 to 10 minutes. I tried 20 minutes also the size to replicate is erratic.

  Why is so huge its more than 1000 MB per replication.

  Hope someone can help me with that.

  Thank you

  Paul

  Re: Storage Direct.  Yes, if you configure these volumes SQL replication, only the changed data will be included.  Only VM will see to all the files in the data store.   However, you still want to replicate your VMFS, but not as often as SQL datastore.

  Re: optimize.  Article I included has the registry setting you need.  This works for all storage formatted to NTFS.

  In addition, when you format the SQL data / log volumes, has the NTFS 64 K cluster size.   The default value is usually 4 or 8 K.  This will align all the writings and readings on the 64K of distribution of the EQL table size.   This improves performance of I/o.

• I have a problem with the headphones C media usb.

  Hello

  I have the C Media USB headphone there the blue plastic on the
  no idea of the model, but when I try to record using headphones don't FRAPS
  There is a constant beep refers to video Youtube:
  http://www.YouTube.com/watch?

  I updated all my drivers and tried various ports and nothing works.

  Thank you

  Hello

  Please answer these questions to better understand the issue.

  1 are you facing this problem just trying to capture the video/audio recording FRAPS?

  2. are you able to hear sounds from other programs and recording using the C Media USB headset?

  3 have you tried to connect the headphones on another computer and check if it works properly?

• Windows 7 problem with speakers/headphones

  I recently got a new computer. It runs Windows 7 Home Premium. The problem is that whenever I have plug in headphones, some sounds come through the headphones and others come through the speakers. I tried to find a way to solve this problem, but I have not found a solution. I was wondering if/how I could choose which sounds come through the headphones and sounds coming through the speakers.

  I recently got a new computer. It runs Windows 7 Home Premium. The problem is that whenever I have plug in headphones, some sounds come through the headphones and others come through the speakers. I tried to find a way to solve this problem, but I have not found a solution. I was wondering if/how I could choose which sounds come through the headphones and sounds coming through the speakers.

  Make sure that you have inserted correctly the socket for headphones in the right port.

  Right-click on the "speaker" icon > playback devices > reading tab > select Headphones > right-click on it to set it as the default device.

• Dell AIO 962 problems with Windows 7

  I had the printer runs fine on Vista and upgraded to Windows 7. Now, it does not print the test page, however - the scanning part works fine. How can I get the impression in working order?

  Hello Rainer fuerst,

  Thank you for your message.  Unfortunately, Microsoft lists your printer as 'Not Compatible' with Windows 7 (as seen HERE).  Some have had success using Vista drivers for different models, but there is no guarantee that it will work for you.  I guess that you already use the Vista driver to get the copy and scan functionality.  However, if you want to install the Vista driver, you can click HERE to download/install.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with computer headphone jack pavilion 15 laptop

  I have a HP pavilion 15 sleekbook (15b142dx is the model number) and it has a Jack Audio/mic on the side left which seems to be defective. Plug a pair of Bose headphones into the socket does not make audio from the laptop Mute speakers, so if I had to listen to music, I'd get audio of my helmet and my laptop speakers (not to mention that it sounds also very shabby).
  is there any remedy that I have to do?

  My laptop has windows 8 is installed. (not 8.1) and I use this laptop for over a year.

  Hello Adam,.

  Thank you for your response.

  I'm sorry for the late reply.

  It may be possible that this is a hardware problem.

  However, I suggest you to read the suggestions in this article and check.
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab2&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope it helps.

  Thank you