Dell Pro 11 venue buttons power no longer works under Windows *.

Similar Questions

• Satellite click 2 Pro P30W - Docking Station for no longer work after Windows 10 Nig.

  Dear masters,

  Since 1 week I ve encountered problems using my Dockingstation
  Satellite click 2 Pro P30W

  After the latest updates of Windows docking station will be recognized only after disconnection of the Tablet, disconnect all devices connected to the docking station.
  That can attach the shelf unit, keyboard is recognized, that reach outside and power devices. Everything works.
  Power it is via the button is not possible when it is attached to the docking station.

  All this is happening after the recent Toshiba upgrades and updates of Windows 10 rises.

  I really need help to solve this problem.

  really good to see that there is no response from toshiba. I think that my company will never buy again toshiba products.

• Paint Shop Pro 9 no longer works under Windows 7 (64-bit)

  I was able to run the program without any problems in the past, but now when I try to open the program, nothing happens except the name of the program that appears as a process in the Manager of tasks.

  Try to open a file *.pspimage results in the error "there was a problem sending the command to the program".

  DotNU, you have installed on your affected computer of Dropbox, and if so, this is the version 8.4.19?

  https://www.dropboxforum.com/HC/en-us/community/posts/208226823-8-4-19-stops-Paint-Shop-Pro-9-from-working

  Ran in earlier this morning and Dropbox uninstalled. PSP9 suddenly works fine. If this is the case for you, you may need to uninstall Dropbox too and hope the devs to fix the problem in a future update. :\

• Power management stopped working under Windows 7

  Plans balanced or energy-saving work. They were fine until a week or two it y a. laptop sleeps or in sleep mode extended. Screen saver lights. Have tried to change that and they still do not work. A ran sfc / scannow and no problem found. Windows is up to date. Any suggestion is appreciated.

  Hello

  This problem may occur if some files associated with power management do not work properly.

  Follow these methods:

  Method 1.

  You can run the troubleshooter of power to set your computer's power settings. The resolution of the problems of power check things as settings timeout of your computer, which determines how long the computer waits before turning off the display or enter the mode 'sleep'. These settings can help you save energy and extend the life of the battery in your computer.

  Open the power Troubleshooter: http://windows.microsoft.com/en-us/windows7/open-the-power-troubleshooter

  Method 2.

  Make sure that you are logged on as an administrator. You can create a new power plan and check if that helps.

  Change, create, or delete a power plan (scheme): http://windows.microsoft.com/en-us/windows/change-create-delete-power-plan-scheme#1TC=windows-7

  Method 3.

  You can view the steps in this article and check if that helps.

  Windows 7 will not sleep: http://support.microsoft.com/kb/976877/en-us

  Response with the State of the question and we will be happy to offer you our help.

• KB980182 - SIDEBAR NO LONGER WORKS UNDER WINDOWS 7 x 64

  My computer has installed the update mentioned above last night, and since then, in my sidebar gadgets were 'corrupt' - the images in gadgets display correctly (white square with a Red Cross). I tried to implement everything, including a system restore, uninstall the update and re-register the different DLLS associated with the sidebar, but no luck. I would really appreciate if someone could help me.

  In fact, KB980182 includes a fix for PNG images.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  Tips for solving problems with Internet Explorer
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-Explorer

  =====================================

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Calendar task no longer works under Windows 7 64-bit

  Greetings,

  Recently, I realized some of my scheduled tasks had ceased to work and have not worked for more than a month. My system changes frequently, because my machine is used for the development, so I regularly uninstallation and installation of various tools, packages, updates, etc...

  Therefore the answer to the question, what has changed on your machine recently, several things have changed. Too many to pin-point and exclude.

  In services, I try to start the Task Scheduler service and receive this error message:the Task Scheduler in service on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs. I see this and it's Ok, all right. Service does not work because it does not need to be. The service is configured to run under the Local System account.

  I then try to open the Task Scheduler application (Admin Tools > Task Scheduler) and receive this error immediately at startup until:remote computer was not found. OK, beyond the error and the Task Scheduler interface loads with errors. Status of the task: Reading Data Failed., active tasks: reading data failed.

  Right click on the Task Scheduler (Local) node > configuration of Service account error:the following error is reported: the Task Scheduler Service is not running.

  Hmmm... service does not start because it is not but Task Scheduler cannot function without the service running. Where should I go from here?

  I posted this question in the wrong forum: http://social.microsoft.com/Forums/en-US/Offtopic/thread/e1fb1fbe-d561-4d86-aeb2-a6f9efc70293/

  It seems that this forum configuration does not allow issues passes to another forum. I had to re-post here.

  Receive the following response and tests:

  [quote]

  You may find it useful to this thread on the forums of Windows 7:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/how-can-i-repair-a-corrupted-Task-Scheduler-in/863fa099-0714-4DAD-9e1d-f972b008f972

  You will also find additional help in the Microsoft Answers for Windows 7 forums, here:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7

  Research on "Task Scheduler" will produce multiple threads in addition to that mentioned above.

  [/ quote]

  [quote]

  Test the first link unfortunately does not work here's the copy/paste from my session Admin command prompt:

  Microsoft Windows [Version 6.1.7601]
  Copyright (c) 2009 Microsoft Corporation. All rights reserved.

  C:\Windows\SysWOW64>schtasks/create /SC Minute /ST 00:00 /TN /TR "Test job" "cmd /c echo % date % % time % > ' «% UserProfile%\desktop\test.txt»»»
  ERROR: The network address is not valid.

  C:\Windows\SysWOW64 > schtasks/delete /tn "Test Task.
  ERROR: The network address is not valid.

  C:\Windows\SysWOW64 >

  Currently trolling through general research approach.

  [/ quote]

  Thank you for your time,

  Doug

  Found the solution:

   
  Start > run > regedit
  Navigate to HKLM\SOFTWARE\ (Wow6432Node\ on x 64 systems) MICROSOFT\RPC\INTERNET
  Export this key to save first, then delete the Internet key (and its subkeys).
  Restart your system
  Scheduler tasks and application Task Scheduler service works perfectly after reboot.

  Reference: http://social.technet.microsoft.com/Forums/en-US/itprovistasp/thread/0c438376-1486-4ae4-9847-2de7a8767f27/

  Doug

• Can I put OS Lion directly to El Capitan without an intermediate upgrade. I have a MacBook Pro late 2011. Safari no longer works on a lot of web content with this OS not.

  Can I put OS Lion directly to El Capitan without an intermediate upgrade. I have a MacBook Pro late 2011. Safari no longer works on a lot of web content with this OS not.

  Yes.

  (143974)

• Meeting place for Dell pro 8 - no response (power problem)

  Recently, my site does not at all. When I press the power button on / off, only the Red led is straighten several times.

  No noise, no response, and full charge. Someone advice me a press power button and a volume less don't button at the same time, but it also no help at all. I think that it is power supply problem. There are many people who have the same problem, but it is difficult to get a refund or repair.

  Dell Korea did not support his fix at all. Why, it's that they do not sell this product locally and it was in the United States

  How can I do? Just throw it?

  Thank you!  In fact, it worked for me after several attempts using other suggestions listed.  It seems that now the button power for 10 seconds, then releasing now for 2 seconds more the thing.

• Dell Pro 11 venue will not be upgraded

  My Dell Pro 11 place will not be upgraded Windows 10. It is said: ""Windows cannot be installed because this PC has a provision of disc not supported for UEFI firmware.". When I got my tablet, it upgraded to Windows 10 fine. However, I had to send the tablet in for repairs, and Dell reset the OS to 8. Now I can not upgrade to Windows 10 once again, receive the error initially. Please help me with this, I have already used up a lot of options and need 10 Windows to work. In addition, the free update of Windows 10 ends in 9 days.

  I was able to pass to the Win10. Obviously, reinstalled Dell Win8 use MBR partitions. On another PC, I had to create a Win8 USB installation, boot from that on my Tablet and delete all partitions. I then installed Win8 using a new partition in TPG. Once 8 has been reinstalled, I installed the driver for the wireless card from the Dell Web site, and then I upgraded to 10 without problem. Then I reinstalled the other drivers from Dell Web site, so that I could use the touch and other screen.

• Dell U2414h menu gone? Keys no longer work?

  My Dell U2414h monitor is connected to the end 2012(El Capitan) Apple Mac Mini HDMI. After 1:30, I can't go back in the Menu of the Dell printer. It seems as if the touch buttons no longer work. It seems that if the menu is somehow locked.

  The only thing dat will work is cut off from the power supply. After that work very good tactile buttons, but after a while or when I closed the Mac Mini, I can't go back in the menu. The Dell monitor is now also waiting because I cannot 'touch' the power button.

  Someone know what I did wrong or is something wrong with the Dell U2414h or is it something in the Apple Mac Mini?

  I asked the same question in the Forum and they said that it might have something to do with my Apple Mac Mini.

  During the Forum, they gave me a solution that does not work for me:

  Reset the U2414H and re - test
  * Turn on the computer and monitor off
  * Disconnect all cables from the screen, including the power cable
  * Press the power monitor in 30 seconds button
  * Plug the monitor cables for the monitor and the video card of the computer. There should be only one cable video connection from the monitor to the video card
  * Turn on the monitor, then the computer

  Note, as this model was not tested/validated on the proprietary Apple hardware, ports, and the software, you must also post on the Apple Forum of Discussions and see if they can offer an overview or troubleshooting steps.

  
  

  Also does not work the solution in the manual to touch the power button for 10 seconds.

  
  

  Someone knows what's the problem?

  I think it is likely yo have a problem with the monitor. The video and does not interact with the onscreen menu/controls.

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  Subject of memory NVRAM and PRAM

• SD card reader no longer works in Windows 7

  The SD card reader does not appear in my computer

  It appears in Device Manager under USB - USB2 Realteck card reader

  It appears in the devices & printers when the card is inserted

  In the Disk Manager it appears at the bottom of the screen when a card is inserted

  However, it does not appear in the upper part of the screen.

  I tried to change the drive letter in the lower part of the screen, but I get an error on the display of data is obsolete and should be updated.

  Do a refresh doesn't change anything.

  It appears in Device Manager under USB - USB2 Realteck card reader

  Realtek RTS5128 Version of the card reader driver 6.1.7600.30127

  http://downloads.Dell.com/Chipset/R294157.exe

  This file contains a compressed (or zipped) files. Download the file in a folder on your hard drive and then run (double-click on) to unpack all the files. Follow the instructions to complete the installation.

  Is your version of the free Malwarebytes or the Pro version?

  Log name: System
  Source: Microsoft-Windows-PNRPSvc
  Date: 05/04/2015 23:06:53
  Event ID: 102
  Level: error
  Description:
  The Peer Name Resolution Protocol cloud did not start because the creation of the default identity failed with error code: 0 x 80630801.

  You may need to change your settings in Windows to be able to view hidden files. To show hidden files type Folder Options in the search box above the Start button and select view advanced settings and check that the box "display files and folders" and 'Hide protected operating system files' are not checked. You may need to scroll down to see the second element. You should also make sure that the box before "Hide extensions of known file types" is not checked.

  Open Windows Explorer by using the hotkey Win + E. place the cursor on computer and expand to see the files by clicking on the icon of the little arrowhead to the left. Place the cursor on a Local Disk (C), expand Local disk (C and continue the procedure following the path of this file):

  C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking\idstore. OSH

  Place the cursor on idstore.sst, right-click and select delete from the menu drop-down. Job done. This should prevent the event ID: 102 errors.

  What is your model of Logitech mouse? Look on the underside of the mouse something like M705.

• Keyboard no longer works in Windows 8

  I have a HP pavilion G6 C0Y35EA #ABU model number. I got an automatic update of Windows 8 and my keyboard stopped working immediately after.

  I checked Device Manager and it says it has no keyboard and gives a code of C24.

  If I go into the installation program until Windows keyboard works fine so I know this isn't a hardware problem.

  Any advice please know how I can get my keyboard works in windows again?

  Thank you

  Hello

  Try the following.

  Open windows control panel, open Device Manager, expand keyboards, right click on the device showing the rror code and select uninstall.

  When done, shut down the laptop - it by holding down the button SHIFT left click Shutdown to temporarily prevent a hybrid boot.

  Then disconnect the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Kind regards

  DP - K

• Solution Center does not work under Windows 7 with Officejet Pro L7780

  Downloaded the latest version of the software for Windows 7 and the first issue was when you try to do an installation complete you get a fatal error at the 96 percent mark when she did the configuration. I looked on the web and found a lot of posts on the same problem. Then, I just uninstalled and made a gradual installation.

  Main printer DRIVER installed first. Then did the functions of imaging followed by the solution Center device.

  Installed everything, but when you run the solution center it says it can't open because incomplete installation.

  The printer works from Windows 7.

  I have an XP machine and Solution Center working on it.

  Any suggestions anyone.

  This thread has resolved the problem installing the software that supports the HP Officejet Pro l7780 for use on Windows 7.

  The event viewer showed mistakes that network location for %APPDATA%\protector.exe is not found.

  Even if I couldn't run the original installation of solutioncenter.msi to work without errors in the log file, without making any changes, which has not completely solved the problem.

  Since solutioncenter, initially did not work, I decided to run solutioncenter.msi manually and look at the log file. See errors in the log file we made changes to the database with Orca solutioncenter.msi. It took us on a long road that does not initially sense that HP would put something out there that produced errors in the msi log file.

  I don't know how the setup.exe uses solutioncenter.msi?

  The changes that doesn't seem it to matter when you run the setup.exe file that is provided in the download.

  If I used the modified solutioncenter.msi or version orginal of it as downloaded from HP running setup.exe site had no importance regarding obtaining solutioncenter work in windows 7, canceled only changes in the solutioncenter log file errors.

  I had to make the following changes to the environment variables to get the full package to work, but what is strange is that I could replace the changeed solutioncenter.msi or the original solutioncenter.msi and run setup.exe, with the following environment changes didn't matter. The solution Center has worked in Windows 7 using one of the solutioncenter.exe and setup.exe.

  Apparently, setup.exe does not use the MSI directely. I think that HP responses suggested that in a previous thread.

  Add these entries (click new...) for the owner user variables and System variables:

  In the name box: APPDATA

  In the value box: %USERPROFILE%\AppData\Roaming

   

  Run setup.exe and event viewer does not display % APPDATA % Scriptures and all work.
  

   

  Thanks for all help on this.
  

• Start Screen Saver hot corner no longer works under macOS Sierra 10.12

  I use Active corners to allow my screen saver lock my screen forever.  The hot corner "Start screen saver" no longer works after upgrade to Sierra 10.12.  'Put display to Sleep' hot corner doesn't work, as do other things like "Disable screensaver" and "Launchpad".  I tried reversing the triggers and active corners and can confirm that four corners work, but none of the corners can trigger action to launch the screensaver.

  try restarting. works fine for me.

• How is my scanner HP Officejet Pro 8500 all-in-one will not work on Windows 8?

  I just upgraded to Windows 8. My HP Officejet Pro 8500 A910 all-in-One printer works fine, but the scanner won't. I get an error message that says: cannot find the scanner. What can I do to correct this situation? HP has a driver that works with Windows 8?

  Did you uninstall this printer before the upgrade to Windows 8?

  If not, then I uninstall the software for the 8500 A910 and reinstall with the drivers up to date.

  The link here for the driver for the 8500 A910 page has e-all-in-one

  You can also get drivers for HP printers in Windows 8 by using the HP printer installation wizard.