Dell Studio 540 no speakers or headphones Sound - win 10

My Dell Studio 540 lost out to attached speakers.  I can't tell if the problem is caused by the upgrade to win 10 or if I experienced a motherboard failure a coincidence.  I tried a number of bugs that include uininstalling pilots, roll back drivers and even install Vista drivers original I have original system disks.  Nothing works.

I see, looking at the acoustic, Panel output HDMI seems to work because I can see where it says sound when playing music.  However, I can't the speakers or headphones of entry to work.  Even if I try the speaker plugs into one of the entrances, the acoustic Panel still shows the headphones or speakers are not connected.

So, how can I get the systΦme can recognize that speakers have been connected?  Is there another driver I can use.  So far, I've tried several driver Realtek and configurations, does not

Apologies for the lack of your post. The Studio 540 has never been validated for Windows 10.

My advice is to disable the Realtek HD audio integrated into Bios - Advanced - Integrated Peripherals. Then install a current PCIe x 1 sound card in a PCIe x 1 on the motherboard slots. His current card will provide 10 Windows drivers.

Tags: Dell Desktop

Similar Questions

  • I have a dell studio 540 with graphics card geforce 9800gt, realtek audio, no sound on HD TV

    I have a dell studio 540 with geforce 9800gt graphics card. When I connect the hdmi sometimes I hear, but after awhile, the sound does not work. Now I have no sound at all. When I hooked the HDMI first, I found a realtek window asking me to activate the sound via hdmi. I find it anymore this window. I can't get the sound to work at all now.  I even tried to use 3.5 mm with hdmi and got nothing. 3.5 worked when I plugged in the vga to tv cable, but the picture quality was awful. How will I know if my card grphx carries sound?

    Hello

    I suggest you try to update the latest drivers for the card sound and graphics card and see if it helps:
    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    It will be useful.

  • At boot Dell Studio 540 running Vista, I get a warning that "Windows host process (Rundll32) has stopped working.

    After each start up my Dell Studio 540 with Vista, I get a warning that "Windows host process (Rundll32) has stopped working.  Although this 'fault' seems to have no obvious effect on the following operations, it is very annoying to have to clear the window. I applied the suggested solutions elsewhere, but without success either.  Can someone please help me - in simplistic terms that I am a silver surfer?  Thank you very much.

    * original title - yet another problem Rundll32 *.

    Thanks a lot for the guide. Finally, I've identified the problem via the boot as in the NVIDIA driver.  I've now updated that and everything seems to work fine - touch wood!

  • Upgrade CPU Dell Studio 540 (current SLB9U)

    Hello!

    I have a desktop Dell Studio 540 I want to upgrade the CPU on (current CPU is SLB9U). I did it on my older Dell that I had before and it went well ("Shesmygordie" helped me on the back then).

    I think searhing the Swedish e - bay (named "Tradera.com").

    My setup is now as follows:

    Computer model
    Studio 540
    BIOS Editor
    Dell Inc.
    BIOS version
    1.1.3
    Date of the BIOS
    25/08/2009
    OS version
    Microsoft Windows 8.1 Pro
    Processor
    Manufacturer
    Pentium Dual-Core CPU E5300 @ 2.60 GHz
    Clock speed
    2.6 Ghz
    L2 Cache size
    2048

    Concerning

    Matti

    mattixx

    Yorkfield Quad Core Q9650 3.00 GHz, 12 MB, 1333 MHz FSB, E0, is the largest CPU supported by the Studio 540.

    A list of the other Inspiron 540 processors supported can be found here:

    http://en.community.Dell.com/support-forums/desktop/f/3514/p/19432795/20036722#20036722

    Bev.

  • Dell Studio 540 Windows 7 X 64 install

    G ' Day,.

    I recently bought a Dell Studio 540 second hand, in private.  I am trying to install Windows 7 64 bit, for which I have a license, but have lost the installation media.  There was no media installation with the Dell printer.  I downloaded an ISO of digital river, the DVD burned, shot to the top of the installation on the PC.  But he asks a driver CD and not proceed with the windows installation.

    Where can I find this driver?  I searched on the section of downloads for serial number and nothing that seems to do the trick there.

    99/100 times there is no such driver.  This message indicates that your media is bad... try downloading, check the hash or use a download manager to ensure the integrity of the download. try to use different software, blank DVD, engravers to create the DVD... you can also try the installation via USB after re-downloaded ISO.  Once successful with this DVD, you will need to activate by phone from Microsoft (not Dell).

    Or you can ask a real installation of Dell DVD by (United States only):

    support.Dell.com/.../backupcd_form

  • Dell Studio XPS 1647 speakers not working not

    Hello, on my Studio XPS 1647 speakers suddenly stopped working. I started it yesterday to the top and there is no sound. Speakers they are silent, but will not reactivate. I downloaded the latest driver and have had no luck even after several reboots. Anyone know what could be the cause?

    Try to use the system restore Windows (type in the search box system restore) and choose a date of before yesterday when you first noticed the problem.

    Also, make sure the Windows Audio Service. (type services.msc in the box.) Scroll down to Windows Audio Service in the list and make sure it is running and set to automatic.

  • 2 short beeps at startup on a Dell Studio 540

    My computer does not start, when I press the button I hear 2 short beeps, a pause, then 2 short beeps again, ideals?

    azstevecannon

    Two beeps indicate no RAM detected.

    First try to remove and reinstall all memory modules [Page 22] to see if that makes a difference.

    http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_studio_desktop/Studio-desktop_Service%20Manual_en-us.PDF

    Bev.

  • Dell studio xps 1645 sound driver IDT works only when it is installed.

    I have the dell studio xps 1645 with windows 7 home premium 64-bit installed on. I have a problem since I format the laptop and reinstalled windows 7 and driver.

    The problem is that with the IDT sound card driver. When I start up the laptop, I couldn't find any noise until then I install the IDT audio driver which is from the website of dell (dell.com.au) under the drivers of dell studio xps 1645 by download. Sounds appears when I installed this driver, but it is not as it should. I mean whenever I do reboot or turn off and then on the laptop, the sound will not come up to what I do reinstall the driver again. The thing is that I have to reinstall the driver whenever I want to use the laptop. can you help me out of this problem? is there any solution for this? I did some research until I get the way to recover my sound, but yes I'm stuck with this relocation pilot to use sound. I did troubleshooting of windows and he said nothing wrong with it. I'll also technician support close to home and they couldn't find anything wrong. I therefore ask microsoft in the hope that they know the way

    . Thank you.

    Hi Felix,.

    Thanks for posting your question on the Forums of community of Microsoft.

    I understand that the sound of your system plays only after you update the audio drivers. The question could arise due to the installation of the corrupt or incompatible driver package.

    Before troubleshooting, I would like to inform you that the drivers for the model of your system on the Dell Web site are displayed for Windows Vista, by default. So, I recommend you to change the operating system to Windows 7 while choosing for pilots.

    In addition, I would suggest trying the following methods and check if the problem persists.

    Method 1:

    Try running the fixit for audio playback of Windows problems and check if it helps.

    Diagnose and solve the problems of Windows audio playback automatically

    If the problem persists, try the following method.

    Method 2:

    If you have installed Windows 7 drivers from the website and have not properly been able to play the audio, then I suggest you to install the Windows Vista drivers from Dell site in compatibility mode and check for the issue.

    1. Download the Windows Vista driver on the Dell website.
    2. Right-click on the downloaded driver file.
    3. ClickProperties , and then select the compatibility tab.
    4. Check enable the option run this program in compatibility mode for: , then select Windows Vista from the drop down.
    5. Click OK and install the driver.

    For more information, please visit:

    Make older programs in this version of Windows

    Hope this information is useful. Let us know if you need more help, we will be happy to help you.

  • DOESN'T HELP WINDOWS 8 NO SOUND! DON'T KEEP SAYING THE NO SPEAKERS OR HEADPHONES ARE PLUGGED IN!

    CAN SOMEONE PLEASE HELP ME UNDERSTAND WHY, AFTER A RESTORE! I DON'T HAVE SPEAKERS OR HEADPHONES SOUND IT JUST CONTINUES TO ME SAYING THAT IT NOT PLUGGED AND THEY ARE TOTALLY?  IV ' E MADE THE DISORDER SHOOT SEVERAL TIMES HE ALWAYS REPEAT MYSELF THAT NO SPEAKERS OR HEADPHONES ARE PLUGGED! I HAD HER JUST BEFORE THE RESTORATION IT IS MESSED UP SO MY COMPUTER IS WINDOWS 8 GATEWAY DESKTOP MODEL... DX4375

    ALL INFORMATION IS GREATLEY APPRECIATED :(

    Me_26

    Uninstall the current driver, then install a new one (even if it is the same date)

  • Studio 540 s, powers but no ports before or aft is working, no video, problem solved

    I have a Dell Studio 540 s of desktop slim which had an unusual problem. Turn on the computer, but there is no video. The video card or onboard video worked. I tried different cables, different monitors. The monitor could not detect a signal. I went on the memory sticks because the faulty memory sticks can cause loss of the video. This isn't that. I checked the correct voltage on the power supply using a multimeter.  I reinstalled the CPU, put new thermal grease on it and then cleaned the whole inside the computer to include fans and their power. Still without success on the video. Then I noticed that not only the video has not worked, but none of the ports on the motherboard worked it didn't detect either the keyboard or the mouse. So I figured simple, the motherboard and since I found one on ebay for $35 it was worth buying. Replaced the motherboard and still no video and no motherboard port working. It is the motherboard. I talked to a Dell technician who came to my place of work. He said to pass on the i/o panel until he had seen that cause problems if it goes wrong. I was skeptical because I had never heard of this being a solution. I have since found a new Panel of e/s on ebay for less than $10. I thought it was worth a try, and I just had to know. I replaced before i/o Panel and wahlah video came and all the ports are working properly.

    Thanks for posting the fix!

  • Dell Studio 540MT does not start, green power light on, but the Start button / clear stop completely

    Looking for assistance

    Have a Dell Studio 540MT (purchased in 2009), worked great until 2 weeks ago.   After a temporary system failure would not start.    The power light itself is green fixed.   The power button on the front panel is completely released.

    I read a lot of messages and other information about a similar problem.   Therefore, I did following:

    1. unplug everything, press the power button / stop for 1 minute and retries.   without success

    2. replace the CMOS battery.  without success

    3A jumps the Green and black 20 supply connection wire pins to motherboard.  It started immediately food, fans and hard drive.   so I assumed that the PSU has been authorized.

    4 replace the motherboard with a new mobo.  Curiously, in a first time, there was no change, but after about 2 minutes, the power button was working and power system.   Everything worked so very well.   I had also completely cleaned all the dust in the chassis and radiator, fan and had applied the thermal paster as directed by Artic Silver.   I even turned off after hours of race and restarted system.  Restarted, he noted that it took a couple times by pressing the power button to make it work.   Then the 2nd day I shut down the system by a normal shutdown through Win 7 and let rest for about 10 hours.   When tried to start/turning the power on again, same problem as the original problem... at first, before light power button would show amber flashing when first pressed the power button / stop, then once I unplugged the power cord and let it sit for 1 hour, the light power button showed no light, completely and again no restarts.

    5. I ordered a new power button cord (new)... This could be the problem and replacement will fix?   Is this a known problem that power button can cause this kind of problem?

    6 or is a problem of power supply?   But you wonder why the green light of the PSU and works very well when jumping the Green and black wire on the connector 20 pin?     Before I go buy a new power supply to other suggestions?

    Is there a known issue with button / stop itself and/or PSU on Dell Studio 540 MTs?

    Yes, the front panel can cause failure to start in some models, although I don't specifically remember if the 540 has been affected by this problem. Please let me know if the replacement resolves the problem.

    ATX power supplies should work. Here are the standard components of the Dell desktop computers.

  • NO sound from speakers or headphones

    HP ENVY 15-3033cl laptop PC

    Windows 7 64 bit

    no error message, I was watching a movie when my laptop died. I plugged it into the power source and now there is no sound from speakers or headphones when I plug. I already went through the troubleshooting steps sound but it says there is no problem detected by the device. The computer is still failry new less than a year, but lies outside of the 90 day warranty. Help please.

    Hello

    Try the following.

    Download IDT Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56900.exe

    One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When you're done, shut down the laptop and perform a "Hard Reset" for your model, as described in the document of HP here.

    One when you're done, press next to the key ESC that you start the computer to launch the Start Menu, then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

    Kind regards

    DP - K

  • Equium M50-192: no sound from speakers or headphones

    Sound disappears after working for three months. No sound from speakers or headphones. Verification of the hardware system breaks down.

    Help!

    Hello

    If after checking the sound settings package (Panel, controller next to the laptop, etc.) the sound doesn't come out so I guess that the sound card on the Board is dead.
    In this case only the ASP will help you solve the problem. Maybe the motherboard must be changed.

  • Satellite A50 no sound on the speakers but headphones work fine

    Hello

    Satellite A50, Win Xp, its installed driver, the speakers are not silent, but when I use the headphones the sound is ok.
    Speakers do not work!
    There are two of them, I opened the laptop there are two sheets separated
    Are the speakers are down?

    But how it comes together at the same time are down?
    Is there any other configuration I need to do?

    Help, please
    Thank you

    Hello

    Maybe the speakers are not defective but the small switch located in the dysfunctions of helmet?  :|
    The little switch turns Mute speakers when headphones are connected.
    Try to move the headset jack a little bit maybe you will notice a few differences

    But just a question; you see yellow exclamation marks in Device Manager? Have you tried reinstalling the audio driver?
    If this isn't the case, then I recommend to reinstall!

  • Pavilion dv6: new headphones, but some emissions are transmitting sound through speakers and headphones.

    Spoiler (Highlight to read)
    Hello
    Hello

    I recently bought a new headphones for the game but had some problems with it and the sound system. A major problem is when I have someone call on Skype, the Skype sound or the call will go through the headphones, but on the other audio from the speakers. I also agree that also what iTunes does not work when I am in a call as well. Some examples would be that if I want to watch a YouTube video during a call, noise would come by the speakers and not the headphones. However, I found a solution for this. All I had to do was turn off the main speakers and the audio was transmitted to the headphones. Another example would be that if I want to run the games through Steam (Garry Mod, TF2, ect.), I get no sound in the game. Not through my speakers or headphones. With one exception, volume of Garry Mod, I can hear through the speakers so that in a Skype call, but I want the sound to come through the headphones. But with TF2, I have no sound whatsoever. If you need more information about me, feel free to ask. Thank you.

    Hello @LayneStaley,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I read your post on how some programs make sounds through the speakers not the headphones and I'd be happy to help you in this case!

    To make sure that your headphones are used when it is connected to your laptop, I advise you to follow the steps below:

    1. click on the Start button

    2. click on Control Panel

    3. click hardware and sound (the icons of sort by 'category' Control Panel) and then click on its

    4. under reading, you should see one or two speaker icons. One of them should have a green check mark next to it (which is the main speakers to your laptop). If the second speaker icon is not visible, right-click in the list of devices and select Show disabled devices

    5. a second disabled icon "speakers" should appear. Right click on this icon, then click Activate

    6. Select the device speaker newly enabled, right click and select "set as default device".

    7. click on apply.

    Please re-post with the results of your troubleshooting, and I look forward to your response!

    Concerning

Maybe you are looking for