Dell studio xps 435/9000 new cpu required

Similar Questions

• DELL Studio XPS 435 t/9000 card reader problem

  I have received my computer desk DELL XPS9000 exactly one month ago. In the first week, the hard drive has failed. If Dell sent a technician has replaced the hard drive.

  Last week, the card reader does not read the SD card. I found that there is a "unknown device" under Bus computer USB controllers, the Device Manager. I was following result after runing DELL self-test - "error initializing Test results: device, 5 d 00 error Code: 0009, Msg: UUTUSBTM - DEVICE_INITIALIZATION_FAILURE user must attach the RH 3 port unit and re-start the test.

  Contacted DELL XPS technical support. The agent could not solve the problem after you install several drivers. He will then plan to send a technician to replace the card reader.

  It seems that I am not alone with this problem. I wonder if there is lack of system design with this nice computer.

  HI2009

  I have received my computer desk DELL XPS9000 exactly one month ago. In the first week, the hard drive has failed. If Dell sent a technician has replaced the hard drive.

  Last week, the card reader does not read the SD card. I found that there is a "unknown device" under Bus computer USB controllers, the Device Manager. I was following result after runing DELL self-test - "error initializing Test results: device, 5 d 00 error Code: 0009, Msg: UUTUSBTM - DEVICE_INITIALIZATION_FAILURE user must attach the RH 3 port unit and re-start the test.

  Contacted DELL XPS technical support. The agent could not solve the problem after you install several drivers. He will then plan to send a technician to replace the card reader.

  It seems that I am not alone with this problem. I wonder if there is lack of system design with this nice computer.

  I've had this problem forever. Problem is that the media player is left in a State of 'strange' because of a BSOD, and I have not found the cause of THE BSOD this.

  My 435 t comes with Vista, and not until I upgraded to W7 I was able to get a handle on this. W7 has reported that the device did not work. Before this Dell replaced the unit and cable. This device appararurent again, only to stay for about 2 weeks. I had it happen once before too, and support me try to remove and reinsert the cables, but I couldn't reach them (support hung up before I could try) and had only tried the device itself, not the motherboard. I called back and said I could not and they sent the parts. Later arrived before the parts I decided to try again by taking unscrew, but I've loosened it and feared the screw would fall into the system and it has tightened. The unit was working again? However, two weeks later he failed. Items sent and installed and it worked.

  2 weeks about go by and it fails. Dell asked me to reinstall Vista and format during the installation. I hesitated and pushed them to do the following. Send a motherboard... and they did it, it was installed and the machine worked. Change the motherboard to solve another problem, 2nd DVD drive opens randomly and narrow when I open the first time, after that, worked OK. That stopped happening.

  After that, I installed W7. Got a BSOD running DVD Flick (there are reports of this failure on Dell because IASTOR, the SATA driver) and the re-start, W7 has reported that a USB device does not work. Well, the media player was gone... open the folder, messed with the wires on the side of the motherboard, case closed, re-boot and it worked again... now I know the "fix."

  It turns out that the fix is REALLY SIMPLE, pull the power cord, wait for the green light to go a little longer, plug the power cord from back in and reboot. Fixed a problem.

  Well, I'd call it a work-around. The real problem is the device USB is not be initialized, either because the BIOS does not power on or the unit was in such a State, it could not be. Removal of power resets the it.

  I hope it works for you.

  IRV S.

• My power button is stuck on my Dell Studio XPS 435 t/9000

  Button has always been a problem, but usually pop backup after a certain time. This time he is REALLY stuck. I have the cover off-side, but there is much too much in the way of the power switch. Is there a way to lift the top cover without breaking the case?

  

• Studio XPS 435 t/9000

  Is there an upgrade of the processor for my machine?  I have 12 GB of ram, which is more than enough for most of the process, but I have a working project that requires more processors

  gwberesf

  Is there an upgrade of the processor for my machine?  I have 12 GB of ram, which is more than enough for most of the process, but I have a working project that requires more processors

  gwberesf

  The following processors are compatible with the Dell Studio XPS 435 t/9000:

  Intel Core i7 920
  Intel Core i7 940
  Intel Core i7-960
  Intel Core i7 965
  Intel Core i7-975

  Before installing the processor, make sure you have BIOS version A16 installed, what support for Intel processors has been added.

  In addition, the following discussion has useful information on the Dell Studio XPS 435 t/9000 processor upgrade:

  http://en.community.Dell.com/support-forums/desktop/f/3514/p/19500829/20340094.aspx#20340094

  Bev.

• Studio XPS 435 t display problems

  I have a Dell Studio XPS 435 t desktop and a Dell Inspiron 560 monitor flat screen Dell ST2310 23 via a port two IOGEAR KVM sharing switch. I have a Samsung TV HD 7100 that I am connected to the Studio XPS video card HDMI port and it worked beautifully, better than I expected. However the Dell monitor has become completely black except for the cursor that lights up when I move the mouse. According to the specifications, the video card Radeon 4350 in the XPS is capable of driving two screens at the same time. If I unplug and then reconnect the HDMI cable going to TV Samsung monitor analog Dell ST2310 returns to the top except there is no bar of tasks or cursor, simply on the desktop. Two display (monitor and TV) devices work perfectly by themselves, but I should be able to use them simultaneously. I scanned for and determined that all drivers are up-to-date. I tried VGA for monitor / output HDMI to the TV with the above results. I tried to use DVI on the monitor, but get no signal HDMI plugged. How can I make this work with what I have?

  Wow, that's a long way for a HDMI signal to run, but it works!

  If your two connections are VGA and HDMI. The Catalyst Control Center shows two monitors?

• Stops randomly on the new desktop Studio XPS - 435 t/9000, please help!

  My parents spent an obscene amount of money on their computer, however, some being computer illiterate they needed me to help out, which I'm all too happy to talk. So here's the problem, the card will be at the end.

  As long as they have had this computer there randomly stop, little by little is that after large amounts of time to be under a light load (I would say 25% of capacity). He would not give an error or close the problems one by one, power, and everything shuts down (turns screen black computer is silent). He tries to return as if you were starting a shutdown computer about 5 seconds after it turns off.

  I thought it was overheating, so I installed a few programs of the manual fan control and ran a few tests with Prime95 torture. Overheating shutdown for CPU was at 90 c, but since the computer is idling at 36 and 62 max on a charge is no longer me, overheating is the problem. So the only thing I can think of that might cause the problem is the power supply.

  It was a costly computer and I do not want my parents wasted their money on it, any suggestion/help will be greatly appreciated , because I'm stuck and do not want to tell my parents to buy a new PSU, if this isn't the correct answer to this problem.

  Any other information needed is provided if I can find a way to find it on request.

  = care =.

  System of pre-ordered computer office = Studio XPS 435 t/9000

  OS is Windows 7 64 bit Home Premium edition.

  Card mother = Dell Inc. 0X501H.

  = 12G DDR3 memory

  Graphics card = Nvidea Geforce GTX 260

  Power supply = (not sure, I couldn't find the model however, it came with the package of desktop computer Studio XPS 435 t/9000)

  Had the same problem. Fixed what mine was enter Bio going to change (power management features) S3 to S1, save the changes. Never had the problem again. Don't know what I did. But it worked!

• Studio XPS 435 t / 9000 desktip - new hard drive compatibility

  I may need to replace the hard drive on my Studio XPS 435 t / 9000 office. How can I make sure that the new hard disk I receive is compatible with the computer? What should I look for? I see one in the Dell store, but it takes 3 to 6 weeks to ship! Thanks for any help.

  Roman J

  You can install all internal, SATA, 3.5 ", hard drive 7200 RPM, up to 2 TB in size.

  Best to search hard drives Western Digital and Seagate brands, also check the length of the manufacturer's warranty, plus the better.

  A good salesman for hard drives is www.newegg.com

  Bev.

• 3 hard disks can be put in a Studio XPS 435 t / 9000 system

  Hi could someone tell me if I can put a third hard drive in my Studio XPS 435 t / 9000
  and type of witch I can use

  kingwarez

  Hi could someone tell me if I can put a third hard drive in my Studio XPS 435 t / 9000
  and type of witch I can use

  kingwarez

  Yes, the Studio XPS 435 t/9000 supports three 3.5 ", SATA drives, see page 57 here:

  http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_studio_xps_desktop/Studio-XPS-9000_User%27s%20Guide_en-us.PDF

  You need a SATA, 3.5 ", internal hard drive 7200 RPM, a SATA data cable 2 x 6-32 x 1/4 cylinder head screws to install the drive, there should be a spare 15 pin power connector SATA for him in the case.

  The Service Manual is here:

  http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_studio_xps_desktop/Studio-XPS-9000_service%20manual_en-us.PDF

  Bev.

• Bricked Studio XPS 435 t/9000 Motherboard

  Looks like I've bricked just my motherboard upgrade BIOS. Anyone know where I can buy a new one or that of another manufacturer that would work in my case?

  STB3

  Try here:

  http://www.eBay.com/Sch/i.html?_sacat=see-all-categories&_FROM=R40&_nkw=new+Dell+Studio+XPS+9000+435T+motherboard+X501H&_sop=3

  http://www.notebookparts.com/Dell-Studio-XPS-9000-435t-Intel-Desktop-motherboard-x501h-0x501h/

  Bev.

• Noise of Dell Studio XPS 9100 CPU fan failure CPU fan

  My Dell Studio XPS 9100 did a loud intermittent noise for a few months and then last week I got a CPU fan fault message while booting. I blew all the dust from the fan and I always get the CPU fan failure message. I finally got the system starts by placing a small fan blowing air into the funnel will CPU/processor fan.

  Alas, my warranty expired 2 weeks ago. I'm kicking myself contacting technical support a few months ago, when the problem started.

  I need to replace the fan. What parts need me, and where can I get them?

  Thanks much for the reply.

  Thank you. After being tossed a little I transferred to the sales and ordered a new CPU fan for a cost total which includes shipping and taxes of $42.25. Too bad it wasn't 2 weeks ago, then she would have been free.

  The seller said that I would not need thermal paste. Is this correct?

  Best regards

  Them

• Studio XPS 435 t / 9000 power supply problem

  My diet giving me in my Studio XPS 435 t/9000. The fan is very noisy, but otherwise there is no obvious symptoms. Since the system is about 5 years, I was planning to change some parts.

  My questions are:

  (1) what could be the cause of the fan to be strong, and what are the potential problems with that?

  (2) a system of 435MT 475W PSU would be compatible, or would I need specifically a 435 t?

  The first thing I would do is keep the Office of your garage. Open the side cover. Use compressed air can and blow all the dust that has accumulated in the tower. Blowing from the rear of the PSU and the inside of it. Replace the cover and retest for the noise of the PSU. The power supply 360w on Studio XPS 435MT will not work. The only Dell validated PSU for the Studio XPS 435 t / 9000 has been F217J 475w. The best video cards, we validated our eating 475w were:
  2XTG4 AMD Radeon HD5870
  5X2CH Nvidia GeForce GTX260

  You might consider installing a power supply of higher power, but with a single card video, you need something bigger then a 650w. You could then spend the video card for sale retail Nvidia GTX660.

• Dell Studio XPS 435MT disk hard clean install of Windows Vista

  My hard drive died on my Dell Studio XPS 435MT. I'm doing a clean install of Windows Vista 64 bit on my new HARD drive using DVD relocation provided by Dell with the PC.

  (1) I am not able to boot from the CD/DVD player, where is the DVD of resettlement. I have set the priorities of boot and disabled the boot from the HDD. Whenever I try to boot from the CD/DVD drive, I gives me a message saying "no Diagnostic Utility Partition identified; Press a key to reboot... »

  If I unplug the new HD, then, I am able to boot from the CD/DVD player and I can not for the Windows Setup screens. However, I can't then point nine hard disk installation.

  (2) as I said, I am able to start Windows Setup screens when the HD is initially disconnected during startup. After I get to the Windows Setup screen I plug HD on the motherboard. The new HD must be recognized if I do this? Currently it is not.

  (3) following the instructions here, I said I need to 'prepare a USB SATA key in advance.

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/Windows-Vista-installation/

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/downloading-preparing-and-loading-SATA-drivers/

  What drivers to I need? I tried the drivers at this link, but when I try to load them on the Windows installation screen I get a message saying that they can not be found.

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=DTT5X&FILEID=2731106696&osCode=WV64&ProductCode=Studio-XPS-435&LanguageCode=en&CategoryID=SA

  Thank you.

  I found this thread on the same subject. Unfortunately your BIOS update can be run from Windows, so that won't help. But down a suggestion to unplug and reconnect the hard drive. Looks like that might work for you.

• Upgrade of RAM Studio XPS 435 t

  I have a Studio XPS 435 t, 64 bit, Windows 7, with 8 MB of Ram. (4) 2 MB sticks in slots 0-3.

  I'll upgrade to Windows 10 and have been informed that I have the 8 MB is less realistic.

  Can I add 4 MB (2) sticks to the empty slots, 4 & 5, or do I put 2 MB sticks in them like the others?

  Or is there a better solution?

  Thanks in advance

  The 435 t is not on the list of Dell systems tested for their compatibility with Win 10. This means it will not work win 10, but you might have a few driver problems that Dell won't help you solve. So before you do anything, it would be a good idea to your Win 7 HDD on external image so that you can quickly return to Win 7 if Win 10 does not work right.  At a minimum, back up all your personal files to an external support.

  Check the RAM installation Manual in the 435 t (not MT). You need the corresponding modules in slots 1,3,5 (blue) and matched modules in 2,4,6 (Pink). If you cannot add 4 GB modules to empty slots 5 and 6 If the other passers-by have 2 GB modules.

  You can get 4 x 4 GB of RAM for this model ~ $100 + at crucial.com to replace what you have now. Or you could buy 3 x 4 GB to fill the blue slots and use the old 3 x 2 GB of RAM (assuming they are all matched) into the pink slots for a total of 18 GB.

  The crucial guarantees that RAM will work if they recommend the modules for a specific system, or they take it back.

  Only you can decide if the cost is worth it for an old (er) PC. And you might want to try upgrading to win 10 first before spending $ on new RAM.

• Dell Studio XPS too noisy!

  I have a Dell Studio XPS 9000 with a Radeon 5870 graphics card that makes too much noise. I think it is the fan noise. I called technical support, which replaced two fans. Did not help - if anything, it is now more noisy he was! All idling, it is not quiet.

  The system is about a year. (Is there more than the 2 fans in the system by the way?)

  (1) can anyone suggest how this system down?

  (2) I contacted a vendor third 3d that makes fans more silent, so-called, but the seller must exact model or type numbers or something Dell fans. Does anyone know how to find out exactly what kind of fans are in the Dell XPS and also exactly what solutions third-party 3d for quieter fans there are, if any?

  It is also an old thread, you should start a new one.

  I assume you mean a Studio XPS 9000.

  This model according to the configuration guide, has no onboard video and no on-board video port is shown in the figure on page 20 of this installation guide. If you cannot select video...

  What do you mean by "the noise of the fan? It's just the fan spins at high speed or is it squealing or some other noise?

  You can open the case and make sure the fan and vents are clean. Use canned air to blow 5 - year-old dust of all components.

  And if this started after a recent update of MS, you can consult the Web of AMD site for an updated driver for the video card today, that works with any version of Windows that you are using before you spend money unnecessarily.

• Dell Studio XPS 8000 - Asus Nvidia GeForce GTX 750 Ti Graphics Card

  Hi I have a Dell Studio XPS 8000. Information on the system it's an Intel i7 CPU 860-2.8 GHz 2.79 GHz and 6 GB of RAM. operating system 64-bit, x 64 based processor.

  I would like to know if I could adapt an Asus Nvidia GeForce GTX 750 Ti graphics (2 GB, GDDR5, PCI-Express 3.0) without any problem? Or is there a better option?

  The current map graphic is a GeForce GTS 240, that it came with.

  I searched the internet to find out that if that would be ok, but became confused if the power supply is sufficient, the appearance of it bed 350w max power. I can't find some people say no and Yes.

  My computer knowledge is Basic.

  Thanks for any help.

  You're better than replace the power supply Dell with a retail food more high wattage. Then the video card will be fine. Read your Manual for instructions.