DELL UPS Network Management Card firmware update is not possible in the management of inverter DELL Multi console

I have a problem with the update of some old software on a DELL UPS Network Management card in DELL Multi UPS Management Console.

We have a few more recent and some models with very old Firmware. The older firmware is: 01.02.0013
I imported the update of the firmware: 01.16.0001
If I select this version behind the inverter with firmware 01.02.0013 it is a red exclamation point.

Also, I can't get to the this inverter https address.

So I do not know how update the firmware of the network management card, please anyone who has a solution...

.

I got it finally working.

I couldn't connect to the interface webGui of UPS in https on IE 6,7,8,9 and calibrated to an ssl error Firefox.
I could not update the firmware using DELL UPS management software can. fatal error.

I then installed Chrome, when connecting to the web GUI I ignored the warning of certificate error and waited...

YES. The web Gui appeared, asking for the password and the Web GUI that I could install the firmware 01.14.0003

After the update of the firmware in the webgui I was able to upgrade to 01.16.0001 in DELL UPS software Multi management.

Tags: Dell Servers

Similar Questions

  • Satellite A200 - Firmware update is not possible

    Hello

    Toshiba Tempro (version v.2.3) informs me that a firmware update is available. He directs me to
    http://nl.computers.Toshiba-Europe.com/innovation/download_driver_details.jsp?id=62091&OSID=-1&driverLanguage=42&source=tempo&LNG=3

    The Satellite A200 (which I own) is mentioned in the supported products. When I download and extract the file (frmwre - 20080422163939.zip) and then try to open TS - L632H_TO02.exe, an error message is displayed:
    "This Firmware is not compatible with the selected drive.
    Contact your system manufacturer for more information on the firmware updates available for this drive".

    Is the message of defective tempro, the wrong file was broadcast on your download server, or maybe it's something that bad?

    Hey,.

    What CD/DVD drive you have? Maybe it is not compatible s, this could be possible, Yes.

    But if your engine is working properly, you can forget about this update. I would like to only do a firmware update if it of necessary.

  • LR update is not possible after the CC licenses

    Hi all

    I had a testinstallation LR 6.1 and bought the CC (Fotography) yesterday. My OS is Win7.1 Pro (64-bit). While LR is able to synchronize with mobile LR, now (so CC is turned on), I can't update to LR6.5. The update function is grayed out. So I can't import Fuji RAW X-Pro2. Help / about LR... tells me that Adobe RAW 9.0 is used. A manual installation of 9.5 does not change this.

    I have tried several different LR installation procedures, scorched stays / in the CC app, used the clean tool CC, renamed SLcache, restarted,... nothing worked.

    Can someone tell me what I should do to get a recent update?

    Best regards, Dieter

    I found a solution on the net. I had to remove a file from update preferences, then it worked.

  • AT300 unrecognized external power - system update is not possible

    I have an AT300 bought in the United States, but I live in Germany. I bought a Kensington absolute Power Dual USB wall adapter with 2. 1 is to connect the USB charging cable to charge the tablet that works very well. Now, the Toshiba Service Station concludes a update for the Tablet system however, an update is not possible because the update process think that a charging cable is not attached, even it is. Why the Tablet does not recognize the connected charger cable? How can I do a system update? What is the difference between the wall adapter to the United States and the Europe Kensington adapter?

    My guess would be that Toshiba has put a few resistors-ID in the data line in the standard charger so you can identify it.
    Here is an article on Apple doing: [epanorama | http://www.epanorama.net/blog/2010/08/18/apple-charger-secrets/]

  • 6.2.5 ReadyNAS 104 firmware update is not displayed for ethernet network adapters > links

    I recently updated my ReadyNAS to 6.2.5 firmware 1.04 and the network > links page does not appear any ethernet cards. I recycled the box several times but still no information of the card. Because I can navigate to the page to admin (via IP address), the network works. However, it does not appear in the DNS so I would check the configuration but impossible because no card shows eth. Any ideas on how to solve this problem?

    I finally solve this by manually installing the 6.2.5 new update. Seemed to have solved any problem occurred during automatic update.

  • OfficeJet Pro X451dw (CN463A): updated the Firmware says X451dw "EC Firmware Updater does not contain updates for your device."

    I'm trying to update the firmware on my HP Officejet Pro X451dw (CN463A), but the firmware update fails with the error "This Firmware Updater does not contain updates for your device." More precisely:

    1. With the help of EWS, I confirmed that my current firmware is very old (it lists the firmware version of BWP1CN1315FR, which means 1315FR, right?, dating almost the time I bought the printer about 3 years ago).
    2. I downloaded the firmware ("OJP_X451dw_R1640A_updated.dmg") was last updated, copied 'HP Firmware Updater' in /Applications and then he ran.
    3. It shows my printer in the Device Discovery list. I selected and clicked on continue.
    4. He thinks for a while, displaying "recovery information...". »
    5. After a wait of 30 seconds (approx.), it displays "EC Firmware Updater does not contain updates for your device."

    Any suggestions?

    You're welcome @justkwin.

    Here is the utility of a Mac computer:

    FTP://g4u0180.Houston.HP.com/FTP4/pub/softlib/software13/printers/pentane/OJP_X451dw_R1548A.dmg

    Kind regards

    Shlomi

  • HP P2055dn Laser printer. Firmware update does not work.

    HP P2055dn Laser printer. Win 7-64. USB is connected. Download the appropriate firmware update, ljp2055dn_FW_Update_20120131.exe. Running the file. Select the printer in the dialog box. Printer has been powered up and ready. Bar showed progress update was sent to the printer and concluded successfully, with a smiling face in the dialog box. However, printer doesn't react at all, just keep to indicate loan. When the Self Test / Configuration page, it always shows firmware like 20111214.

    Printer works fine. The update is supposed to fix a security hole.

    Found the answer on the support page for businesses. Buried in the Menu of configuration, to the terms of Service, the last menu item is RFU. This determines if the firmware can be updated. The default value is OFF and LOCKED. It must be put on updating the firmware. After update, it will automatically return to CLOSED and LOCKED.

    It would have been nice if HP put it in the manual, rather than trying to pay $35 for the support of something that should have been documented. Must be a secret or maybe I'm the only person who didn't know what that meant the RFU.

  • Cannot install After Effects CS6 for Mac running Yosemite 10.10.3. Tried to run the update, does not. Tried the update of the application Manager initialization failed. Referred to as Support Advisor, abandoned.

    Cannot install After Effects CS6 for Mac running Yosemite 10.10.3. Tried to run the update, does not. Tried the update of the application Manager initialization failed. Referred to as Support Advisor, abandoned.

    start at the top and work your way down to apply applicable patches until your problem is solved.

    If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html

    If your error is:

    "Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.

    first of all, rename folder OOBE OOBE.old.

    to find the OOBE:

    Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE

    Win 32 bit OS: Program Files \Common Files\Adobe\OOBE

    Mac os: HD > library > application support of > adobe > caps

    Mac os: USER > library > application support of > adobe > OOB

    If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.

    If you use an installation dvd:

    Copy the contents of the drive in a desktop folder and install from this directory.

    If you are using a mac:

    1. try to create a new user account in Mac with administrator privileges.

    2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the

    3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.

    4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.

    5 restart the installation.

    If everything is applicable above fails, check your Setup logs:

    http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html

  • Photoshop CS6 update is not possible

    I use Photoshop CS6, Version 13.0 x 64, extended. My system is Windows 7.

    When I try to update from the show, I get the error message that an update is not possible and that I should install Adobe Application Manager. When I try, I get the error message depending on whether I should install Adobe Support Advisior. That Proramm is no longer supported.

    Then I load the files to update from the Adobe website. After having unpacked the file, I started the AdobePatchInstaller.exe. The following error message is the same as at the beginning.

    I did a new install of Adobe CS6 and installed in a folder named Adobe Photoshop CS6.

    No idea what else I can do to get the latest version of CS6?

    Hello

    Please refer to the link given for cause of update: troubleshooting problems update | CS5, CS5.5, CS6

    It will be useful.

    Concerning

    Bianka Attre

  • I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017. MSFT site was no help. Any recommendations?

    I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017.  MSFT site was no help. Any recommendations?

    Since neither updates Jan - 10 have installed, I'm going to hand you Support MS in the hope that they can resolve the problem. See below.

    That being said, is an interpretation of the 80070017 - cyclic redundancy check error "a device attached to the system does not work," which suggests that a hardware problem might be the cause of the error (although I must say that it is a very low possibility in this case).

    Good luck!

    =======================

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • my updates are not proceed with the installation even if it is powered. I've had a wndows XP SP2

    my updates are not proceed with the installation even if it is powered. I've had a wndows XP SP2

    my updates are not proceed with the installation even if it is powered. I've had a wndows XP SP2

    If you mean that Windows updates are not proceed with the installation, it is because the support of Windows XP Service Pack 2 ended on July 13, 2010, so no updates were available for this purpose since then.

    http://Windows.Microsoft.com/en-us/Windows/help/end-support

    To resolve this problem, you MUST upgrade to Windows XP Service Pack 3, which is covered and a link procided further to the bottom of the page at the link above.

    Rob

  • Several windows updates are not installed and the error code given is 66A

    Original title: updates

    Several windows updates are not installed and the error code given is 66. However the error is considered to be unknown and the code is not useful to find a solution. Anyone know what the code means, or we mean?

    Hello

    1 did you change on your computer before this problem?

    Follow the suggestions and check if it works.

    Method 1

    You can reset Windows Update components and see if it works fine.

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058
    Method 2

    You can download and run the system update readiness tool.

    Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
    http://support.Microsoft.com/kb/947821

    See also:

    Error code '0x8007066A' or "66" when you use the Windows Update Web site or Microsoft Update to install the .net Framework update

    http://support.Microsoft.com/kb/2507641/en-us

  • BlackBerry Smartphones Facebook updates are not displayed in the Facebook BB app

    Hello! I installed a new version of the Facebook app for BB (2.0). Everything is going well except for the fact that some updates are not reflected in the Facebook of BB application. I get normally new RSS and messages, but I don't see it as "xxx was marked in picture xxx" or 'xxx and yyy are friends now. " Is it supposed to be like this? Or something is wrong?

    Information that you reference was never available in the facebook for blackberry app, same 1.9. However, you can only view the mobile site by pressing Menu in the application, then select "Go to the Mobile Site" it of your perception of information, hope that answers.

  • I ran a diagnostic on my dell xps and he said that my network 9 cards and 11 will not work because of windows

    I went to the Device Manager to see if something was not working and the 9 and 11 adapters will not load not because of something that invovles windows, I didn't understand and I wanted to know if these cards need to work. Also my Intel graphics driver kernel slows things should uninstall.

    Hello

    Make sure you have the latest vista drivers for your computer which you can get your computer manufacturers Web site

    go to their website and look for a driver and software download section

    Enter your model number for the last look drivers vista then download and install

    http://support.Dell.com/support/downloads/index.aspx?c=us&l=en&s=Gen

  • M277DW: Firmware update is not available...

    I tried to get the scans from the printer to go to my shared network drive (smb) (which is visible on the network)

    I had 3 tech this morning, on the HP chat system, to attempt to repair. 2 of them quit trying after 1 houre, they did not say a word they just closed the connection.

    Still, I wonder if the firmware I have is the most recent: my printer is on firmware # 20150126

    I tried to get you updated by wifi or ethernet, it just says could not connect to the service and to check your internet connection and try a gain. If my firmaware is a bit old and it tries to connect to protocile smb2 since apple (os 10.10) Yosemite as uses a new smb Protocol v3

    the printer configuration page

    Product name: HP Color LaserJet MFP M277dw number of trainer: ZK351Y5 serial number: VNB8H71JH0 cartridge Index: ID Service BMP GKBO: 25253 Firmware Datecode: 20150126 Version of the control panel: 0x15 disable Fax: no Version of Telecom: location 14/04/01: Canada ADF installed: Yes print quality Monochrome of Max: Max 600 x 8 color print quality: number of controller ImageREt 3600 : 12400 duplexer Version: Description of device 0: HP Color LaserJet MFP M277dw language: English default settings: self-managed number asset: Your Company Name: contact person: location of the device: geo location: product safety: Off Wired HW address: 30:8 d: 99:ae:f4:0 has Wireless HW address: 70:77:81:73:a0:63 network in use: Wireless host name: address IPv4 NPIAEF40A: 192.168.2.14 IPv6 address : FE80::7277:81FF:FE73:A063 total memory: 256 MB of memory available: 106,30 MBytes

    HP tech just called and talked consolidated firmware and he could say it was outdated. Sent me a file locally updated the firmware from a reason any, that he was not able to connect to the update service.

    And everything works now! I'm now a happy customer! = D

    BTW the last firmware is currently 20150716

    So with an older firmware needs updating to MAC system 10.10 + to be able to get the records of network works.

Maybe you are looking for

  • Strategy for the appropriate charging MacOS, MacPro 2008 3.0

    I recently bought a MacPro in early 2008 (3.0 Ghz) at a sale of surplus. The hard drive has been wiped, and no installation of MacOS disks have been included; So I need to use software to run it. What is my best strategy for loading software for this

  • TOSHIBA 500 GB external HARD drive

    Hello Please I need help... My system is not able to recognize all available on my hard drive capacity. What should I do to use the hard drive full? 500 GB is the ability, now its GB full but only 256 and the rest I can't fill, I get a message 'not e

  • Birthday Facebook notifications

    I am a new user of the CLIQ. So far I really like it, but I can't seem to find a way to remove or change my Facebook friends birthdays. Most of them are not close friends and that I must not have their birthdays on my calendar and most certainly no n

  • HP pavilian a1720n problems please help

    I just bought a used hp pavilian a1720n and it will allow me to go into settings and that's all after the blue screen it goes black with a mark of dashboard flashes in the upper left corner, as it is a custom computers, they added a third ram as well

  • VCS Starter Pack can be used as VCS-E without any upgrade?

    My client a VCS - C and the TMS, the VCS Starter Pack. We rely on the deployment of all in the traditional model. What I have to migrate MS full Expressway product or I can leave it as what? Can't he do while it is configured as the Starter Pack? Thi