Dell V305 printer does not print anything and it used to work properly. Still scans, etc., everything will not print.

I have a printer Dell V305 that worked very well, but I'm more able to print anything from my laptop. Scanning, etc. still works but not the printing part. I have Windows 7 64 bit. He has a solid orange light on.

Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

Tags: Windows

Similar Questions

  • My Dell V305 printer prints very small. How can I get to fill the page?

    My Dell V305 printer prints very small.  How can I get to fill the page?

    Hello

    Were there any changes made on the computer before the show?

    Method 1:

    I suggest you to refer to the article and see if it helps:

    Resources for the resolution of the printer in Windows XP problems

    http://support.Microsoft.com/kb/308028

    Method 2:

    See the articles and check if that helps:

    To set printing preferences

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_setting_document_defaults_personal.mspx?mfr=true

    To set the properties of the printer

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_setting_printer_props.mspx?mfr=true

    Settings that affect printing

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_c_properties.mspx?mfr=true

  • All of a sudden, my dell inspiron 6000 does not connect to the internet and has an error message to see article 871122.

    New error message to see article 871122

    All of a sudden, my dell inspiron 6000 does not connect to the internet and has an error message to see article 871122. That's happened? I used it last night to check my email, and then I deleted some photos on the disk hard and this morning it will not connect. I don't really understand what happened to him because it was off last night.

    Hello

    1. you are using a wireless connection?

    If you are using a wireless connection, I suggest you to update the latest drivers for the network adapter and check if it helps:
    http://support.Microsoft.com/kb/283658

    Also check this link for troubleshooting steps:
    http://support.Microsoft.com/kb/314095

    It will be useful.

  • says I have emails, but not down load them - used to work properly

    says I have emails, but not down load them - used to work properly.

    For an example says that there download 1 / 6 after awhile, he says no new messages. I can check my email from another source and see that I have 6 messages and am able to read them. I ran scan programs and malware and clear up all the problems, they found that Thunderbird is not download again. I'm on the latest version 31.6.0

    This is probably one of these programs of malware or anti virus which is at the origin of the problem. Disable the e-mail in your anti virus and restart your computer. Best? What anti virus is it anyway?

  • I want to upgrade to 10 windows, photoshop and Lightroom cc 2015 work properly?

    I want to upgrade to 10 windows, photoshop and Lightroom cc 2015 work properly?

    Cloud and Windows 10 https://forums.adobe.com/thread/1912621

  • I have a Dell (Dell V305) printer that is only a year. He has been guaranteed. What was happenning, is that the printer does not print up what I uninstall/reinstall.

    I'm having a problem with my printer does not print.  What I do I uninstall the printer and reinstall then it works very well for a week or two and then the problem starts again until I have reinstall the printer again.  The printer has ink, so it's not the problem. That's how I know it does not print: when I try to print a cartridge level page show empty and I can't print.  Yet once, when I uninstall/reinstall the printer, then the catridge levels show complete and then I can print.  I thought that maybe it could be that some issue that when I uninstall the printer that not all components are removed.  I uninstall not uninstall printer functionality and not the Add/Remove Control Panel.  Uninstall from the control panel would solve this problem?  Please notify.  Thank you, John

    Hi sockers,.

    1. did you of recent changes on the computer?

    2 when was the last time it was working fine?

    3. do you have security software installed on the computer?

    4. you receive an error message when printing?

    I suggest you run the fixit tool available in the link when you are unable to print on the computer and check if it helps below.

    Problems printing and printing errors

    http://support.Microsoft.com/mats/printing_problems/

    If the previous step fails then I would suggest that you uninstall the software from the printer to the computer using the method mentioned in the link below and then install drivers from the Dell site.

    Uninstall Dell V305

    Drivers & downloads for printer V305/V305w AIO inkjet

  • my cd/dvd drive has stopped playing cd/DVD, I'm operating on the windows media player 11 and my dell v305 printer

    my dvd/cd player works on windows media player 11 and don't play more or reads cd/DVD it used to automatically read the DVD but suddenly stopped working also my printer that a DELL V305 does more whenever I click on print a window opens and says internet Explorer windows has stopped working and I need solutions as I am a new student online and my readers need and printer to work. can someone help me please?

    I tried uninstalling and reinstalling my printer as well as running a virus scan and always my printer does not print. the fact to unplug and re plug do not work and also, since I put in a new ink cartridge it said also of alignment problem. whenever I click on print, a window saying windows internet explore has stopped working. I looked in my device manager and noticedthere is that a 6T 04 NIC DOES NOT WORK give me code 10. could be the problem? can someone help me please?

    This should not be the problem.

    http://social.technet.Microsoft.com/forums/en/itprovistahardware/thread/3a503cdb-e61c-44BC-97c4-0b38b0e5f929

    Read the info above about your error Code in the 6 to 4 adapter...

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Dell.com/support/downloads/DriversList.aspx?c=US&l=en&s=GEN&ServiceTag=&SystemID=PRN_INKJET_V305&OS=WLH&OSL=en&CATID=&impid=

    Uninstall/reinstall your printer using the drivers from the link above from Dell.

    http://support.Dell.com/support/topics/global.aspx/support/my_systems_info/manuals?c=us&l=en&s=Gen& ~ CK = anavml

    And get / please read the manual above for your printer model to solve the problem of alignment, as it is a Dell printer problem.

    See you soon.

    Mick Murphy - Microsoft partner

  • I have a Dell V305 printer scanner. The printer works fine. When I try to scan it says list of applications to download and then he said: it couldn't download the list. I don't know what to do.

    I tried everything to make it work. Reference Dell wanted to charge me 234.00 for them correct errors on my computer where the printer does not respond to my computer. I don't have a disk for the printer when you purchase my system. I restored to factory default and now the printer works fine. All windows updates are made. But somethis does not go with the scanner. Please someone help me!

    Update to the latest version of the driver: http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats?DriverId=R264821&FileId=2731112408

    and the latest firmware: http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats?DriverId=R205586&FileId=2731123538

    can help.

  • Dell AIO 948 does not print

    Do not print on the Dell AIO printer.  It passes through the movement of printing, but does not print.

    Hello
     
     
    1. have you made changes on the computer recently?
    2. do you get an error message when you try to print?
    3. are you able to print the test page?
     
     
    Method 1.
    First, let us run the fix in the article below and check.
    Problems printing and printing errors
    http://support.Microsoft.com/GP/printing_problems
     
    Method 2.
    Clear printer spooler files and activate the spooler service
    a. Click Start, type "Services.msc" (without the quotation marks) in the Open box and click OK.
    b. double click on "Printer Spooler" in the Services list.
    c. click on stop, and then click OK.
    d. Click Start, type "% WINDIR%\system32\spool\printers" in the opened window and delete all the files in this folder.
     
    For more information and procedures, refer to the article below.
    Solve printer problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
     
     
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Dell v305 printer cannot communicate with the dell inspiron laptop

    My dell v305 won't print when asked by my computor.  He does not communicate.  I tried all of the troubleshooting techniques, System Restore, computor reboot and everything I can do, but nothing works.  The printer will print on its own, but does not print when you are prompted to do so by my laptop. I disconnected and then reconnected all wires repeatedly.

    ThomasKnightZH,

    Try to check your anti-virus program and firewall. They seem to block communications.

    What version of Windows are you using?

    The printer using the usb cable or the wireless adapter?

    If wireless is your router wireless using these recommended wireless router settings, I use channel 11.

    Rick

  • My desktop Dell - Vista - computer does not, the monitor says no entry and have to wake up computer

    I have a desktop Dell Vista computer.  A few days earlier, when I pressed the power button to turn it on, nothing happened.  When I turned on the monitor, he says that he came into power saving mode.  When I checked the monitor once again, he said that there is no entry for the computer and press any key of the keyboard or mouse to wake up.

    The computer is plugged in and the green light in the back is on.  I don't remember putting the computer to sleep.  I thought I made a stop for a few days in advance.  Press and hold the power button on the computer does not start it or turn it off.  There is no sound (such as a fan).  I unplugged the computer briefly a few times, and then I finally unplugged overnight and is plugged in.  Light lights up in the back, but is not the "num lock" key on the keyboard and the light under the mouse does not light.

    I checked a few suggestions on this site, but they all require that the computer be on and you enter in this form or the screen.  Is the computer dead?

    Thanks in advance.

    Hello

    There seems to be a problem with the hardware, I suggest you to contact Dell support on this subject.

    http://support.Dell.com/

  • Windows Defender does not allow me to run full spyware analysis and dell docking station does not open

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: I have problems with 2 programs

    1 Iam trying to run a full scan to see if I have any spyware on my computer and I can't because Windows defender does not open or does not

    2 Dell Dock doesn't open because the language file was not able to load and I can't find any information on the dell dock

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    RE: Dell dock
    Try uninstalling dell dock > and then reinstall.
    Link to DellDock: http://www.delldock.com/

    Or contact Dell technical support. Link to it: http://support.dell.com/

    t-4-2

  • DELL Inspiron N5110 does not stop and does not wake from sleep

    Hello.

    I have Dell Inspiron N5110, who cannot stop it in Windows 7 or Ubuntu Linux. Specifically, I started Ubuntu Live from CD to eliminate the possibility that the problem is in Windows 7. Stop in Ubuntu does not work either. This proves that the reason for not an application in Windows that remains suspended and does not allow the laptop to close.

    The laptop computer may not wake after sleep or either Hibernate.

    I tried all the solutions that advised you to all the other people in the forum who have the same problem.

    1. the laptop cannot stop mode safe either.

    2 may not stop even after clean boot Mode - all services disabled and all package disabled Startups.

    3. I haven't tried to change the Power Options Advanced "Allow hybrid sleep" - both WE "On AC Power" and "Battery operated" - no change.

    4. I tried to install the latest NVIDIA video drivers. This did not help either.

    5 running only on battery change nothing - not cannot always stop.

    6 race only on AC adapter without battery - still cannot stop.

    7. I tried to remove the AC adapter and the battery, and now the POWER button for 30 seconds to RESET the phone - did not work.

    ATTENTION: I have read your forums all day and has seen at least 10-15 reports on the same problem, and not a single case fixed.

    8. This is why I have not tried Flash the BIOS with the latest version - I have read other people who have tried and it didn't work either.

    9. I loaded the BIOS default settings (F9) - stop still can't.

    NOTE: Change something in the BIOS and getting out once caused the laptop to freeze and I had to power off by holding button for a longer time.

    10. I ran DELL Diagnostics menu Boot (F12 at startup) - no error found.

    11. I couldn't find IEEE 1394 adapter in Device Manager to change the power management settings.

    In fact, none of the suggestions that you can give to change something in Windows is logical because I already mentioned that stop in Ubuntu does not work or the other.

    The question seems to be either in BIOS or a hardware problem. But which component? This is the CD/DVD drive?

    It is a new laptop.

    Please advice how to proceed. If you know which component fails please tell me.

    Remove the keyboard and palmrest (dell guide shows you how) and you should see a small button battery. Remove it at least 10 seconds, then put back. Enter the BIOS and make sure that there is nothing weird was changed. It should work fine now. I had this work in Ubuntu 12.04 these last days with no problems.

  • Reference Dell A10 946 does not

    See the description in the "title area' above.

    My printer (Dell 946 A10) is not communicating with my command 'print '. I can copy, scan & Fax, but cannot print.

    Hi Lee,.
     
    1 you get an error message when tried to print?
     
    We recommend that you download and run Microsoft set to find and correct printing errors. To do this, visit the following link and click on the "Run now" button: http://support.microsoft.com/gp/printing_problems
     
    Visit this link for more information on "Solve printer problems":
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
     
    I hope this helps.
     
    Thank you
    Syed
    Answers from Microsoft supports the engineer.
  • Brand new Dell 2808 router does not work.

    1. the 2808 is not connected to the internet.

    2. when it is received, the 2808 under tension with the disabled DHCP server and port active routing. It is the default setting. Not good to use normal, but worked as advertised. The DHCP server is usually needed in a small switch. I needed an active DHCP service.

    3. I've changed managed and connected fashion. A "saved to restore configuration screen" appeared. Horrible thing. Trashed the router. There is no saved configuration, the 2808 restarts. 2808 completely stopped working after that.

    4. after resetting 2808, the 2808 seemed no longer routing packets, so nothing works now with the exception of the web client, which does not seem to do anything for the networking.

    5 I did activate the DHCP client and configure the IP pool. However, no routed packets, nothing works. Port au port data routing does not work. The DHCP server is not required to allocate IP addresses.

    6. I paid 80 dollars to a so-called "Dell Customer Service" held to solve the problem. They have failed. It turns out that they did not know how to work the 2808.

    7 I have not understood how to contact customer service the Dell directly for the 2808. Not good. I bought a T7810 workstation in 2015 with 5 years of service from Dell, and I don't know how to contact Dell support technical support. I use the 2808 with the T7810. Both should be covered if the customer service could be found.

    8. bottom line, I bought the 2808 on July 27, 2016, and many hours later my effort and more hours of a consultant, I am frustrated trying to run home mode: a router 8-port 1000-baseTpacket with a DHCP Server enabled. I'm about to box 2808 router back to Amazon because it does not work and cannot be implemented.

    Any ideas?

    Thanks in advance to 1 million.

    Keith

    The simplest method to contact support is to enter the serial number on our support site.
    http://Dell.to/20VqlwQ The site will then list the various methods to contact support for this range of products.

    The 2808 PowerConnect doesn't have a console port, so recovery is somewhat limited. If the switch is on firmware version 1.0.0.38 or earlier, then a factory reset can be done by simply changing the transition from managed to not managed and then again. If the switch is on more recent firmware, however, this process does not reset the switch to factory default.

    Being a new switch, it should be under warranty. If the switch is not recoverable, support should be able to get a replacement sent to you.

Maybe you are looking for

  • G - drives not recognized by MacBook Pro 13"

    Hello I have three G-drives; It broke in early 2013, another broke out by end 2014 and this one broke yesterday. I mainly use external hard drives to move movies on my MacBook Pro once I watched, while in the past, I have not too concerned about the

  • HP Pavilion 14-ab021tu: HP Pavilion 14-ab021tu LAN driver

    I install windows 7 pro x 64 on HP Pavilion 14-ab021tu and download the driver for the LAN (name of file sp71191) but it does not work. Please help me find the latest driver for LAN! Thank you very much.

  • Example: HP 3050 has ALL-IN-ONE: I'M KIKO1213.

    I ALWAYS HAVE PROBLEMS WITH THE SCAN TO WORD, I CAN NOW SCAN IN FORMAT PDF, NEED HELP

  • Cannot install 2463332

    I'm unable to install the 2463332 update and this prevents closing my computer. Please let know us in detail

  • Integration of database with WebWorks?

    Hello developers, I develop an application for someone for blackberry 10 WebWorks, and there is no need of a relational database. Is it still possible for WebWorks? Thank you!