Dell Vostro 220 does not turn on

Hello I have a Dell Vostro 220 desktop computer purchased in 2009.

I noticed yesterday that is not switching on.  When the power cord is plugged into the outlet, I see a green light on the back on the power supply (under the voltage 110V setting) but that's all.  By pressing the push button on the front, nothing, absolutely nothing happens.  No fan, no LED inside.

What can be wrong here? bad power supply or bad mother or push button simply bad diet?

Any help will be greatly appreciated.

Thank you

ndhaya

It is a Vostro 220 Mini-Tower

No, the power supply fan does not work.

Power LED button is also DISABLED

No there are no beeps at all.

Apart from the green power light on the back near the power cord, there is nothing else...

 
ndhaya
 
First, try to connect the power cord directly into another outlet and see if it makes a difference.
 
No difference, then replace the power supply with a unit of work to 'know '.
 
More generic standard ATX power supplies, with a 24-pin or 20 + power connector 4 - pin main motherboard, with or without the on/off switch, would be compatible with the Vostro 220 m

You should be able to buy a compatible power supply either a local computer or online store.

 
 
Bev.

Tags: Dell Desktop

Similar Questions

  • (Redirected) Dell Vostro 1510 does not restart after the replacement motherboard (CPU the question!)

    Dear,

    I have a problem with my laptop (dell vostro 1510). For the second time my screen went completely black. I couldn't see anything, but the computer was not working. I assumed it was for the same reason as the first time (burnt video card). I have replace it with it and when I try to start the laptop I just get three led among that flashes on the left. It is not go further and I don't have access to the bios. The diagnostic led codes say it is a problem with the processor. How can I test if the processor work? For me, it's weird with the old motherboard, it began. I also tried to reset the CPU on a different time slot. I don't know what to try anymore.

    If you have any suggestions please let me know

    Have a nice day

    Gian

    As you have a laptop, better make this laptop in the computer Forum post here:

    http://en.community.Dell.com/support-forums/laptop/default.aspx

    Bev.

  • AMD Radeon 7400 (switchable graphics) on dell vostro 3350 does not work under Windows 8 (error code 43)

    Hello

    I just installed Windows 8 and switchable graphics does not work on the system. The most annoying is that I can't use the radeon graphics card, because the stop system it works.

    I've attached a screenshot of what I see:

    What I have tried to solve the problem:

    • Install the latest drivers AMD radeon HD (http://support.amd.com/us/kbarticles/Pages/AMDCatalyst1211betadriver.aspx)
    • Reinstall the driver built-in Intel (HD Graphics 3000)
    • The latest version of the A09 bios for laptop
    Nothing has worked.
    Switchable graphics worked very well under Windows 7 64-bit.
    Help, please!

    and the version of the driver:

  • Dell Inspiron Touchpad does not turn off

    I've been through everything, and it seems that there is no real help available for this problem.  I bought a Dell Inspiron 5050 in August 2012.  Updated November 7 to Windows 8 and I hated typing since (which is unfortunate, because I'm a student who wrote many papers) because since the installation of Windows 8, the toggle switch that disables the touchpad no longer works.  Not only that, but even without touching the keyboard, the cursor jumps around and I find myself correcting the text at least 1 to 2 times per line (Yes, by writing this, I already had to solve four, making five, errors).

    I spent more than 2.5 hours on the line then a tech controlled my computer remotely (I got another problem solved) and he could not understand either.  There IS NO option to disable the touchpad in the Control Panel, or change the settings for sensitivity.  I tried to uninstall the driver, and it did not work.  Currently, I have a big piece of cardboard glued on the touchpad, and which has not helped at all.  I HATE Windows 8 because of this whole fiasco (and I tell everyone I know about the many problems I've had so far).

    Maybe this isn't even the problem of Microsoft, but the answers tech with insulting tones kindergarden instructions don't WORK, then please do not give me one.  If you can't tell, I'm more annoyed and I wish that I had NEVER been updated to Windows 8!

    If someone gives me a USEFUL answer, I'd be happy and stop to say Facebook, Twitter and everyone I know face-to-face how I HATE Windows 8!

    Thank you!

    Search the Trackpad in the start screen and open the settings tab.  Then open the settings file.  Make sure the tapping is checked.  Click it and then click on the gear at the end of the line (you must pass your cursor over the line of tapping to get the equipment).  Make sure the Double tap to toggle the TouchPad is checked.  Click to close this window and OK on the first window.  See if the double tap works now.

  • Dell Vostro 200 does not start after installing the SP2 for Windows Vista Business

    I have to keep which dates back to the system restore to get my computer on the road.  Whenever the update is installed I don't get past the first Screen Microsoft with the arrows.  Now, my computer is very slow and I have not been able to install SP2. I need very simple instructions I'm no computer expert!

    Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • WiFi connectivity - the On / Off button on my Dell Vostro 1310 does not

    I can't have the WiFi button to enable the WiFi connectivity. I tried to update the drivers from the Dell site, but I thought that the material is missing.

    Any suggestions are welcome.

    Thank you

    Mervyn

    Hello

    As you say that you tried to update the wireless drivers, but were informed that the hardware connection Wi - Fi is 'missing '. I suggest that you either contact Dell or you could ask their Support Forums:

    http://en.community.Dell.com/support-forums/default.aspx

    See you soon.

  • My dell studio 1555 laptop does not turn on

    Hello

    Does not turn my dell studio 1555 laptop computer. I tried all the troubleshooting option provided in the dell forums.

    Here are the steps:

    • Disconnected all external devices on the computer, including the battery and the AC adapter / CC.
    • Press and hold the power button for 20 seconds.
    • Reconnected the battery and the adapter.

    After checking all the options of this still my laptop does not turn. I am not able by any beeps as well.

    I even checked the video output connect my laptop with an HDMI cable on other devices (TV). The screen is blank.

    Kindly let me know what we can do more.

    PS: I have no warranty for my laptop.

    Thank you

    Kirti.

    Check that the LED on the adapter lights before plugging the end of the book.  If this is not the case, replace the card.

    Try without the battery - if it will then light up, the battery is bad.

    Unplug, remove the battery, press power for 30 seconds and remove and reinstall the bars of memory.  Try again.

    If it lights with a good map and without the battery, replace the motherboard.

  • Dell Vostro 220 s turn on but only show black screen on desktop

    My 2008 late model Dell Vostro 220 s desktop with power on and go while the start and shows windows starting but when it will go on the desktop, it will just show a black screen. Any help would be nice!

    Thank you

    Darian C.

    You can try to start your 220 s in VGA mode (video low resolution).

    To start your computer in low video mode resolution, follow these steps:
    1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.
    2. hold the F8 key as your computer restarts.
    3. in the Advanced Boot Options screen, use the arrow keys to select Activate video low resolution (640 × 480)and press enter.

    If the problem is not reappear low resolution mode, then the question is probably associated driver. You may be able to resolve this problem by updating the video driver with the latest version of Dell or Intel.

  • Dell Streak 7 do not turn in force start does not work

    the Tablet does not turn on - although the menu items are side lit.  I tried to stop the force pressing on the power button (at one point and at the same time) and it didn't work.

    any other suggestions?  Thank you.

    Have you tried the reset button of the pin code?

  • my sex cam dell vostro 1500 is not working or projection in Device Manager

    my sex cam dell vostro 1500 is not working or showing in the Device Manager, my cyberlink ucam tells me that there is no deevice of captuing.

    I really don't understand because the built-in webcam or imaging is supposed to show in the Device Manager, but it does not appear.

    I am using windows 7 ultimate.

    Hello

    Troubleshoot camera connection
    http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

    You probably need to recharge the device drivers and camera control software (usually included
    with the drivers and installed at the same time).

    Login as an administrator.

    Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
    on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
    is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
    will update the driver stack.

    Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
    software (if not more recent get the same).

    Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

    Manually look at the sites of the manufacturer for drivers.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
    to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    Then let windows updates on however prevent loading of drivers who are often older than the
    those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
    really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

    Stop Windows 7 to automatically install device drivers
    http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

    How to disable automatic driver Installation in Windows 7 / Vista
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

    Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
    Ultimate and Enterprise)
    http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

    ----------------------------------------------------------------------------

    Check with Dell Support, online documentation and drivers (update or reinstall), and
    their forums.

    Dell support
    http://support.Dell.com/

    Dell support drivers - product manual & warranty Info (left side) - and much more
    http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

    Dell forums
    http://en.community.Dell.com/forums/

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • My computer does not turn off, it crashes on closing.

    My computer does not turn off, it crashes on closing.  I have to press the Start button, in the hold, and then after 20 seconds it turns off.  Often when I turn on the next time, it sometimes says Windows is not stopped successfully, but I know that all my programs had been closed.

    My computer is Dell and my package is Windows Vista.  I have McAfee security set up and I bought Uniblue to try to help, but not joy.

    I wouldn't use anything done by Uniblue, it does not work. It will make things worse.

    I would like to uninstall Mcafee, and then use the removal tool to remove it completely. Install rather program AV from Microsoft.

    If you need help I see what is running with teamviewer. You'll see what I'm doing. If you get this, give me the ID and the password. So I can log in. Or if you use Skype, add me. My Skype name is the same name I use here

  • DELL Vostro 1510-drive not recognized

    The energy guy

    Does not have a will to w-OS/Vista DELL Vostro 1510 only not the DVD player. Alert manager says device "this device cannot start" - 10 of the Code. Yesterday tech DELL replaced DVD drive, used, boot disk Windows does not not diskW, said looks like a software problem. What I do next.

    Hello

    Dungeon involved Dell's Support until the problem is solved, check their documentation online and their
    forums.

    Dell support
    http://support.Dell.com/

    Dell support drivers - product manual & warranty Info (left side) - and much more
    http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

    Dell forums
    http://en.community.Dell.com/forums/

    ------------------------------------------------------------------------------------------------------------------

    Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
    http://support.Microsoft.com/kb/943104/

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Dell Precision T3500 does not start

    I have Dell T3500 Office, I pressed the Start button and the lamp on the Start button began to blink for a few seconds with a noise of power supply (SMPS/PSU) and 1 and 3 flashing and lights out. During this time I have observed that the power supply fan GET making small movements but does not turn the LED on the motherboard (orange) lights. I tried to start again and again, it does not work.

    Is this because the PSU become defective? or simply a RAM issue? I removed the RAM cleaned and then re inserted but it went past too to no avail. Can someone help me please to solve this?

    Flashing power button / stop Amber is bad food.

  • Power supply Dell Vostro 220 questions

    Hello

    We have a Dell Vostro 220, which has power problems.  He started intermittently but now it very rarely powers upward.

    The green light in the back where the power cable goes in turns.

    When I press the switch, it flashes orange once. Then the two fans start but stop after a second. Then they both start, less than a second. The power switch will Flash orange one more time. Then nothing. In the past, we could try once again and she would start, then it got worse and we need to repeat 10 or 20 times to make it work.  Now it seems that we could try all day and he would never start.

    I opened it to the top. Disconnected and reconnected everything and try again - it worked fine. But the next day it turns on again.  So I opened, and even once and this time I changed the CMOS battery. I've start it 3 times now and it has worked well, and the user used for the rest of the day.

    However, this morning, he refused to start up again. Same problem as before.

    Is there anything else I could try?

    Thank you very much

    Peter.

    Power...?

  • Dell Vostro 220 Mini-Tower power supply

    The Dell Vostro 220 Mini-Tower supports a power more than the factory installed psu and if so how much power does support? I read here and there that it supports 300 to 350 watts... no one knows with certainty? ... Thank you.

    Lonetrapper

    The Dell Vostro 220 Mini-Tower supports a power more than the factory installed psu and if so how much power does support? I read here and there that it supports only 300 to 350 watts... nobody knows with certainty? ... Thank you.

    Lonetrapper

    This is false, as a greater power supply and can be installed.

    Generic standard ATX power supplies, with a 24-pin or 20 + power connector 4 - pin main motherboard, with or without the on/off switch, would be compatible with the Vostro 220 Mini-Tower.

    You should be able to buy a compatible power supply either a local computer or online store.

    Need a power supply with four SATA power connectors.

    Bev.

Maybe you are looking for

  • Build &amp; write to text with different column formatting

    3 days, I just pass on what appears to be a simple problem: I have a VI that reads a significant length TDMS file containing data sampled at 1 MHz 2-channel (very large files of course). The VI only runs 1 second at a time and looking for threshold c

  • all the pages that load do not match the screen have to scroll on the side to side to read

    all the pages that load do not match the screen have to scroll on the side to side to read

  • Tools problem

    Hello. I have a problem. don't know what happened but now whenever I change a tool is dropdown menu appears. It's really annoying. How can I solve this problem? (single click, simply change tool. long or double waiting for menu drop-down)

  • alias of report in IR

    Help, please.I'm under apex 4.1.1;I have an interactive relationship with alias report 2: primary (40-column screen). Alternative (20 columns of display);I also have a link "link to custom target" report link on the form with all 40 columns.I want th

  • Issue of SelectOneChoice!

    I have a VO with one application selection simple query as belowSelect * from countries where active = "N".This query is now 257 data that is retrieved in db within 2 sec.When I create a LOV (choiceList) for the id of the country and display in the u