Dell Vostro 3550 USB PORT don't DO NOT WORK

Similar Questions

• Installed Windows & 32 Bit drivers and USB ports don't DO NOT WORK.

  I bugh a laptop HP Pavillion 14 TS who came to preinstall Windows 8.1 64-bit I hate so wiped the drives and installed Windows 7 32 bit and now I have a big problem.  None of my network drivers work and 2 uSB ports where I plug in my mouse and other devices of SB to do more work.

  I did a back up of the established SW leader who has all the HP dvers for my laptop but will not install the network and video of divers. And when I try to install the drives, I get the error message saying that they are not compatible with this version of Windows.

  I loked on the HP site under my model of laptop that s as above, but HP don't do my notebook drivers for Windows 7 32. And I looked on both the Realteck site for network wireless Realteck and Ethernet Realteck drivers but none of them work or install on my OS. Intel video drivers do not work either. So I'm really stuck one I can not return to 8.1 Windows as if that 32-bit Windows 7 works on my laptop but most of my drivers is not compatible with the operating system and I don't want not to install 64-bit Windows, I like 32-bit.

  Drivers that do not work on Windows 7 32-bit are:

  Realteck RTL8188EE 802 - 11 b/gn witeless lan

  Die Ethernet Realteck and

  Intel High definition graphics driver

  That don't work at all under Windows 7 32 bit because they are the only 64-bit drivers.

  So can you please post me a link network bth and drvers of graphics from Intel that works with my laptop. I tried many different drivers Realteck and raphics for Windows 7, but none of them DOES not work on my system. And none of my USB ports are no longer works. So, how can I fix this?

  Hello:

  Should be no problem to get W7 32 bit to work on this model.

  Just use all the drivers and software from the HP Probook 450 G0 on your model, except the Audio, BIOS and firmware files.

  Your model uses only the Intel HD graphics driver.

  The first pilot, you need to install the Intel chipset installation utility and reboot.

  http://h20565.www2.HP.com/portal/site/hpsc/public/PSI/swdHome/?cc=us&lang=en&sp4ts.Oid=5359407&AC.admitted=1408825729704.876444892.492883150

  Audio: Accept the agreement.  Download and install the driver first on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  If for some reason, this model Intel HD graphics driver does not work, use this one...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23713

• The USB ports and keyboard randomly not working no-error 43

  Hi all

  I tried intermittently in recent days to resolve a really annoying error 43. I was able to glean
  of the various forums that problems similar to mine are most often took place and various folk remedies
  appear to be available, but none of them have worked for me.

  Here's what happens: apparently at random, my usb ports and a keyboard stop working. It's especially annoying
  because I have a usb mouse, when this error occurs, I'm so completely powerless to do anything.
  I got around it sometimes by plugging my mouse into a different usb port (my computer a lot). That's how
  I found that I was getting code 43 error, "this device has been stopped because he reported the problems." (do not remember
  the exact wording).

  This started happening a few days ago, I've never had any problems like this before. I also tried other usb devices
  in the port - nothing works when the error occurs. Curiously, the error sometimes stops just as randomly
  as it begins. Sometimes some ports work and others - sometimes, I can't use my keyboard, but not my mouse and
  Vice versa.

  Here are the remedies I've tried:
  1. Uninstall and then reinstall the drivers for the USB controllers, mouse and keyboard
  2. performance of FixIt for hardware and drivers
  3 let the computer unplugged for a while, then returning to it (it helps temporarily, but the error still recurs)

  Sometimes, I heard that you may need to update your BIOS. I already have the latest version of.
  If someone needs more information, let me know.

  Alright! That's all. I hope someone can help me, that would be a really stupid handicap for my computer to have otherwise.

  Update the latest drivers windows 7 compatible chipset and motherboard manufacturer's Web site.

  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  If the problem continues, I fear that you may need to replace the USB hub.

• Pavilion 500-081ea: FRONT USB 3 PORTS don't DO NOT WORK.

  I recently had an ASROCK H61M-DG3/USB3 motherboard mounted in my not so old (18 months) HP Pavilion PC 500 - 081ea & even if original HP 3 USB ports are connected to my new motherboard that do not work.  All the USB in the BIOS settings are turned on & the right USB drivers are installed in "Device Manager" without conflicts I still can't use the two front 3 USB ports.

  Hi Jeff,

  The reference to a technician came from your other messages.  In any case, the cable USB 3 header, as previously mentioned will restrict the question.   I keep this cable in my toolbox for situations like yours when I change sets and motherboards.

• My USB ports and MIC do not work. I hope that this is not the motherboard. Someone knows how to fix this?

  Initially, it was a port that would not work. Before the USB ports out I did pay my phone with the USB cable. Before that my microphone stopped working. Deactivation and activation of the ports as well as uninstall then re install the USB readers and I tried a system restore. I also tried to take the battery for an hour or two and restart the PC. None of this has worked. Today, I heard some hope of my computer... I heard the sound of him recognize a dongle that is plugged. This sound is produced after starting my PC. I have not heard in a while and still haven't when I unplug and plug back in to the dongles. My computer (a laptop) like also to restart auto sometimes when I close the lid and open it, the screen does not light and it will be off and try to restart itself but the screen never lights up and he'll stop and try several times to start. In this case I have to hold the power button down to turn off completely and take the battery out and put it back in, then turn it on. I feel that it's a hardware problem but I'm not that great with computers and I don't want to give up yet on this computer. It cost me a pretty penny and I am a broke student.

  If anyone had the same types of problems and has a solution I'm willing to try anything.
  Thanks in advance
  -Mike

  Hi Mike,.

  You can consult the following wire link and check if it helps.

  Tips for solving problems of USB devices

  It seems that you have to re - enable ports in the BIOS (Basic input/output system) settings.

  NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk. Be sure to observe the manufacturer's instructions or contact the manufacturer for the same thing.

  You can consult the following thread link and check.

  USB ports, CD/DVD player, and Mike just does not work

• 3 USB ports on 4 does not work on Satellite A660-12th

  Hi, I have a problem with my laptop french: 3 or 4 of my usb ports does not work.

  My laptop is a:
  Satellite A660-12th
  Reference: PSAW3E-02700GFR

  I almost tried everything:
  -reinstall all drivers
  -Uninstalling the root USB controller and restart the computer
  -Finally to format my laptop and clean reinstall.

  -3 ports still does not work and I do not know how to solve them.

  I bought an of 2 TB external HARD drive and its driver is installed but not recognized by the last working USB port. I really need to fix the other 3. Could you help me?

  Wait a moment have you tested all 3 USB ports only for external 2 TB HDD?
  How USB ports do not work if you connect a USB mouse or a USB flash memory stick?

  Page plug Toshiba says that this laptop supports 3 2.0 USB ports: 1 left, 2 right
  The one on the left is a port eSATA/USB 2.0 supporting sleep and fresh.

• USB port is powered but not working

  Hey guys,.

  One of my usb ports decided to stop working properly, I am still able to use devices that ONLY require a power supply, one example being my external fan that works very well in this port.

  However, I'm unable to use my mouse or any storage device in the port.

  The lights (as appropriate) on the devices will be turn on as normal but will not do much than that.

  I did not major changes since the last time that the port has been used successfully, it has just stopped working.

  I rebooted several times and the problem persists.

  All the other usb ports of normal work, no problem.

  Data sheet:

  Pavilion DV6-7029TX

  Running 64-bit Windows 8 Pro

  All up to date with windows updates

  If any other information is needed please let me know.

  I'd appreciate any help someone can provide to help me get to the bottom of this.

  See you soon.

  -Brendan - Hello,

  I think we should ALL drivers. The Chipset drivers are the drivers for your motherboard and other drivers for individual embedded devices. I think we should do your Chipset Drivers first, and then the pilots on your side. Like building a House we ensure that the Foundation is solid before adding home on top. What I would like to is to download and install ALL the drivers from the HP Pavilion dv6-7029tx Entertainment Notebook PC Drivers page. Make sure that you download and install the drivers for the Chipset first, after that is not matter which order you install the drivers.

  Please re-post with the results on one of the threads that you have on the go. Thanks for posting on the HP Forums. Have a great day!

• Cannot print. Reference Dell 944 communication usb port is not available. error check your firewall settings to ensure the printer communication is not blocked.

  Original title: unable to print. Reference Dell 944 communication usb port is not available.

  Message says 'check your firewall settings to ensure the printer communication is not blocked. Printer has worked faithfully until the problems started with the XP Home operating system. To cut a long story short ram upgraded to 2 GB, all unnecessary programs identified and technician Microsoft contacted to solve problems.  I was informed of problems caused by 3rd software party conflicts. Kaspersky was apparently the culpit. Dell Inspiron 32 now much faster but the printer will not work little matter what I do. I tried to reload with drivers & utility CD, drivers uninstalled & reinstalled on the site of all nothing is? Can someone help?

  DavidNicholsonXN,

  How to download and install drivers in the correct order

  also try to read...

  The owners of all-in-one printer Dell 944 thread (W7)

  Let the printer after Kaspersky

  Rick

• Why is upgrade Windows 10 - not Dell Vostro 3550 on the list of Dell?

  I found this list on the Dell site that tells you if they tested a particular model for its ability to be upgraded to Windows 10.   The Dell Vostro 3550 is not on the list of 20 Vostro models, some wearing low model numbers, some superiors.   They will never test it?

  If you try to upgrade, windows 10 copies files and then in the 2nd of three main sections of the upgrade (where you have this big circle in the middle of the screen), it just goes to a blank screen and then ceases all activity of the disc, and it becomes well hung.   Of course, now the machine think operating system is win 10 and you cannot return to a recovery point 7 win.  If you lost all of your data and applications and restore the image and then install the windows 7 208 updates and it takes like 8 hours total.

  Looks like a similar problem that people with Vostro ranging from win 7 to win 8.   Why not fix it.

  Also, I fell into the same rabbit hole. But I realized quickly that it was a video problem and I hung on an alternative to the unit's LCD monitor... worked just fine, there has been able to do the update of bio and play with the drivers.

• HDD problem Dell Vostro 3550

  I use a Dell Vostro 3550 running Windows 7 64 bit since may, 2012.

  Recently, on running the Dell Diagnostics, it shows that the hard [Samsung HM500JJ] has no 'targeted reading Test ". More recently, when I run scan on the hard, the system stops and restarts.

  I ran diagnostics from the ePSA which also shows an error code "'2000-0146 [Msg: hard drive 0 - S/N S2APJ1KB704677, self-test log contains previous errors]."

  This means certainly I need to replace my hard drive or I say otherwise?

  I even ran the QuickTest online, but this time too the system crashed. I'm afraid that something is seriously wrong with the hard drive.

  Y at - it another option to replace the hard drive?

  My warranty expired last December.

  Hi Shireeshmehta,

  Yes, you certainly need to replace the hard drive. If you do not receive a reinstallation of Windows 7 with your system drive, call Dell and they can provide you with one, you will need to install the operating system on the new drive. I have a link below for a very complete Windows reinstallation guide.

• I have re-installed Windows Vista on my laptop (Dell Inspiron 1525) and now my wireless does not work.

  Hi, I have re-installed Windows Vista on my laptop (dell insparon) 1525 and now my wireless does not work. ive tried re installing driver, but it says operating system not supported. I used the disc that came with the computer of the re install and I even tried to install service pack 1. .

  original title: Wireless problems after install.

  I just tried both, the dell is one that says OS not supported"and the intel, it went very well, but my 'network controller' still have a yellow top thing in Device Manager. and I always wireless. any other ideas? Thank you for the help

  Question...  You have whatever it is listed in the "Network adapters" section of "Device Manager" now?

  While ensuring that the exclamation point is not for your wired network device (plausible) or bluetooth (plausible) and you just need to configure your wireless network to connect to * your * wireless network now.

  You may have to contact Dell to see why none of their drivers receive your wireless device works on the original operating system, what they included.  This could be a hardware problem PURE.

• HP Pavilion Volume Touch-Pad don't DO NOT WORK. NO SOUND

  HP Pavilion Volume Touch-Pad don't DO NOT WORK

  I have a HP Pavilion dv3t - 2000, Windows Vista-based computer.

  Touchpad volume above, that the keyboard does not work properly (it there is no sound coming out of the speakers or the headphones), if you touch the part above the keyboard touchpad megaphone, then it remains red, but the sound icon on the taskbar change mute to reactivated when you touch the Red megaphone. The volume on the touchpad slider works amazingly.

  I don't know if I uninstalled something or what but I need this fixed a problem!

  Thank you!

  Hello

  Pretty well, I waited the Audio service to miss because it is installed by the IDT program, but other services were in the correct state?

  Try a manual update to the generic Windows driver.

  Open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select Properties.  Click the driver tab and click Update driver.  Select "Browse my computer for driver software", then "Let Me pick from a list of drivers for devices on my computer.  Left click to access high definition Audio Device to highlight, and then click Next.

  Did this install without error and you get any sound?

  Kind regards

  DP - K

• I just installed windows 7 ultimate 64-bit on my laptop dell inspiron 1501. Now the scrolling does not work on my touchpad. Any ideas.

  I just installed windows 7 ultimate 64-bit on my laptop dell inspiron 1501. Now the scrolling does not work on my touchpad. Any ideas.

  Try the web site of Dell for Win 7 drivers. There may be some here. If it does not exist, you might have to wait until the public release before Dell post...   Mike Hall MVP - Windows Experience http://msmvps.com/blogs/mikehall/

• My MOMENTUM PS/2 port touchpad touchpad does not work correctly.

  I'm using acer aspire laptop v3. My MOMENTUM PS/2 port touchpad touchpad does not work correctly. It stops working sometimes and automatically return to the action after a while. When he stops working, pointer can be moved but just click, left click, scroll etc. do not work... Help, please...

  Hi Anoop,

  This problem may occur because of incompatible or corrupted touchpad drivers. I suggest you to uninstall and reinstall the drivers and see if it helps.

  To uninstall the device drivers, follow these steps:

  a. drag the mouse down to the left and right click on the Start icon.

  b. Select Device Manager.

  c. right-click on the device driver, and then click Uninstall.

  Check out the link to install the drivers:

  http://www.Acer.co.in/AC/en/in/content/drivers

  It will be useful. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• Vostro 420 USB ports cannot be turned off

  If you stop a PC, provide all power to the USB ports?

  If I keep my Dell Vostro 420, fans to keep silence and the PC shuts off, but it still powers the USB ports.

  Is this correct behavior?

  (I have two other PCs two Dells and when they stopped they provide NO power to USB ports)

  How do you know that the USB ports are always under tension after stopping?

  The answer to your question is "it depends." Some newer computers have PowerShare, which means at least one USB port is still under tension after the stop so that you can charge a device, for example, a cell phone, which is connected to the PC, even if the PC is turned off.

  See specifically PowerShare mentioned in none of the Vostro 420 docs, but this does not mean that it didn't.

  And remember, even if the PC is turned off, the motherboard continues to receive "electricity", as indicated by the LED on the motherboard that needs to be on whenever the PC is connected to a working outlet, even if the PC is turned off.

  You can connect the PC through a power strip and cut the tape off the PC normally in Windows, so there is no power to the wall. And if you set the BIOS to restart automatically after a power failure, the PC restarts automatically as soon as you turn on the power strip. Handy if you connect PC and monitor to the same Strip, so a switch on both and starts booting.