Dell Vostro 5470 not get Dell Logo after update bios in Windows 10

Dell Vostro 5470 not get Dell Logo after update bios in Windows 10.

Laptop computer has restarted:

1 Fireed power led,

2 Powered hard drive for 2 seconds to turn it off.

3. stops...

No Dell Logo, no beeps, can't go in the Bios.

Test LCD works OK.

Remove the module of Ram, power on and listen to beep

Pressing the END key and power for laptop has no effect.

Any idea?

Yes. I did it.

Laptop have bios Phoenix.

Phoenix Bios have restored the USB Flash procedure.

This procedure to restore the BIOS:

1. download USB flash less than 4 GB.

2 format in FAT.

3. get your flash update of the Dell store - xxxx.exe

4. run cmd.exe and in the command prompt, run /writehdrfile xxxx.exe

5 extracted copy of Bios.cap for the flash player.

6. turn off the power to the laptop.

Next 7,8 step may not be necessary but I did it.

7 disconnected all perihpericals with battery and charger.

8 disconnect the HARD drive

9. connect the USB on the laptop on the right side.

10 press and hold the END

11, Pluged the power cable and the relase the END key 1 second after the power cord is in.

12 USB led on stick flashed quickly and we see the process of recovery of the Bios on the screen.

13. After finishing laptop restarts and worked well.

Tags: Dell Laptop

Similar Questions

  • can not get video images after update flash player

    My flash drive plays audio but no video (just a black screen)

    I have a new Win7 64 bit COMP. using 32 bit Internet Explorer. I have installed flash version 10.2.152.32 WIN. I uninstalled using uninstall adobe restarted between each step as an administrator (don't know if it's important but I'm the only user listed with admin rights, but I get the screen of standard user account). Then I manually installed the new flash drive as an administrator. What Viiv version, checked all settings-trusted sites explore & internet areas-,(7 times now) I checked the add ons I am wherever I am supposed to be activated, I never received no errors, nothing was open during the installation and the screen remains black.   even tried to change the registry (I don't have the line listed in the mail from adobe on flash killer). I have run norton and checked it does not block flash player or active X controls. I'm completely at a loss for what? Help!

    Hi, I could test here with all browsers and see if you can see the logo Flash aninmate. It also displays the version installed FP.

    At that same site you can go to this site: http://www.adobe.com/software/flash/about/. Right click on the Flash logo, settings,.
    Then, disable hardware acceleration in display settings.

    You can ensure security, the average value for the Internet Zone. IE, tools, Internet Options.

    eidnolb

  • Do not get the sound after having moved to windows 7 Windows 8

    No sound in Windows 7

    Sound indication bar is moving, but I can't hear anything. I checked the speaker connections and even tried the plug to headphones, but still no sound. Device Manager does not have any problem, and I don't get the error messages.

    Here is my system information:

    Motherboard: HP183F

    HDAUDIO\FUNC_01 & VEN_8086 & DEV_2806 & SUBSYS_80860101 & REV_1000
    HDAUDIO\FUNC_01 & VEN_8086 & DEV_2806 & SUBSYS_80860101
    HDAUDIO\FUNC_01 & VEN_111D & DEV_76D9 & SUBSYS_103C183F & REV_1001
    HDAUDIO\FUNC_01 & VEN_111D & DEV_76D9 & SUBSYS_103C183F

    Hi Isabelle,.

    I would like to know some information about the problem so that we can help you better.

    What is the brand and model of your computer?

    Thank you for details on the issue.

    I also know that the inconvenience that you are experiencing because of his problem. I will definitely help you.

    This problem can occur either because of corrupt audio driver or incorrect audio settings.

    I would suggest trying the following methods and check if it helps.

    Method 1:
    Troubleshooting of audio playback and check.
    Reference:
    Open the troubleshooting of Audio playback
    http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

    It search common problems with your volume settings, your sound card or driver and your speakers or a headset.

    If this does not help, use method 2.

    Method 2:
    Please use the suggestions in this article and check the issue.
    Reference:
    No sound in Windows
    http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Satellite 4100xcdt does not recognize HARD drive after update BIOS version 8.20

    My laptop is a satellite 4100XCDT with windows xp and I want to install linux.
    Have the cd bootable linux (tested on other computers) but laptop doesn't not boot cd shape so I updated the bios with version 8.20 from the toshiba support site.
    Tried the disks formatted 1.44 and 7.20 such as recommended in the manual of the 4xxx series. BIOS has been updated successfully

    Result: after pressing the switch of the usual screen Toshiba appears, after the disc hard led flashes for a few seconds then windows except modus menu appears. After I made my choice (all tried) a few seconds later (and hard drive led light) flashes a blue screen (not enough long to read the message) and the computer is restarted. When starting from a back bootable floppy, I can't reach the (cd rom) drives (hdd) C and D
    But in my opinion that Windows Save menu modus is called from the hard drive (so I think that the hard drive still works)

    Hello

    Well, in my opinion a part on the HARD drive or bootable partition might be corrupted.
    You are right, if the windows save mode appears therefore HARD drive has been recognized by the BIOS and the HARD drive is bootable.

    I think there must be something wrong with the data on the HARD drive.
    Something similar happened on my laptop several weeks ago. After you use the chkdsk/r, I was able to run the operating system again. But then I installed everything again.

    On the Toshiba page I found the companion disc.
    The accompanying disk is capable of detecting your CD-ROM drive on the
    Toshiba during the boot process. If you need access to your CD-ROM
    Hunt, then delete "rem" Word the following lines in the Autoexec. BAT
    and CONFIG. SYS on the accompanying disk.

    REM if exist toscd001 a:\mscdex D:TOSCD001 /M:10 (AUTOEXEC. BAT)

    REM device = a:\toscdrom.sys (CONFIG. (SYS)

    It may be useful

  • BT not detected after update BIOS and windows 8.1 & wifi adapter with envy J000 Touch series (J001tx)

    Hi, I have an Envy Touchsmart J001 TX laptop.  I've upgraded to 8.1 Windows a few days back and my pc was working fine. Yesterday, my WIFI and Bluetooth stopped being detected.

    I checked Device Manager and it does not show the adapters. My system has BT Ralink and Realtek wifi b/g/n.

    Restart the system, WiFI present themselves and worked normally, but on next reboot disappeared again.

    The physical plane mode button is orange and pressing or off change in the status of shows like airplane on or off but the notification area icon mode shows no change.

    The network and sharing Center shows not router WIFI in the settings of the card and even the menu of configuration of Windows 8 don't tell no detected wirelessadapter.

    I've updated my drivers and even my BIOS. Earlier I got the version of BIOS INSYDE F.24 and current installed BIOS is INSYDE F.53. Here is the log file in the folder SWsetup containing the unzipped BIOS file. I think that the BIOS is not installed correctly. Please analyze the log file and do not tell if you see something wrong.

    Has anyone else had a similar problem with the update of the BIOS, or with WIFI after Win 8.1 update?

    -Log started: 2014/04/16 19:50:11
    Initializing...
    Log file: c:\SWSetup\SP65654\InsydeFlash.Log
    Settings file: c:\SWSetup\SP65654\platform.ini (found)
    Executable: c:\SWSetup\SP65654\InsydeFlash.exe
    Version: 4.5.6.1 build: InsydeFlash
    Date: Mon 21 Oct 13:11:30 2013

    Resource file: c:\SWSetup\SP65654\iscflash.dll (load)
    Application name: InsydesFlash
    Information of the operating system: Microsoft Windows 8 - supported
    M - FD: 0 0 0 2 does not match FFFFFFFF & 1963103 C! = 1962103 C
    M FD: Match!
    M - FD: FD name 01966.fd
    IHISI Version: 204
    M - FD: 0 0 0 2 does not match FFFFFFFF & 1963103 C! = 1962103 C
    M FD: Match!
    M - FD: FD name 01966.fd
    sH19Infor.dwBootBlockInfo: 10 d
    Check of sign of starting block: 1
    The status of function block start: 4
    Lock status of the EC: 8
    Sign checks number of items: 0
    BBL level: 2
    M - FD has achieved:
    01966.FD
    Offset: 7380688
    Allow Version: 000, Dex: 0
    Current version: F.24, Dex: 3876
    Current BIOS version is greater than the version installed in the Ini.
    SearchVolumeFileAndCreateDirectory
    SearchVolumeFileAndCreateDirectory
    SearchVolumeFileAndCreateDirectory
    SearchVolumeFileAndCreateDirectory
    SearchVolumeFileAndCreateDirectory
    SearchVolumeFileAndCreateDirectory
    SearchVolumeFileAndCreateDirectory
    M - FD has achieved:
    01966.FD
    Allow Version: 000, Dex: 0
    Current version: F.24, Dex: 3876
    Current BIOS version is greater than the version installed in the Ini.
    Partition: 1 WMI 0x0D: 1
    Check the package: 1
    Sign of the BIOS: 1
    BIOS size: 0 x 00800000, SHA1 sign size: 0x00000000, SHA256 sign size: 0x00000100
    Sign of the file: 1
    Open file c:\SWSetup\SP65654\01966.fd
    No sign of present
    Reading 8388608 bytes of the file starting with 0...
    The BIOS image size: 8388608 (0 x 00800000)
    sH19Infor.dwBootBlockInfo: 10 d
    Check of sign of starting block: 1
    The status of function block start: 4
    Lock status of the EC: 8
    Sign checks number of items: 0
    BBL level: 2
    Current BID: 0008EFA0, new BID: 0008EFA0 size of BIOS: 00800000
    non_shareEC Ec starting address: 00000000, end of Ec address: 00000000, current size: 00010000, new size: 00010000

    Preparation stage

    Error code: 3010 (0x00000BC2)
    Cleanup phase
    Step completed
    -Newspaper arrested: 2014/04/16 19:50:55

    -Log started: 2014/04/17 22:05:35
    Initializing...
    Log file: C:\SWSetup\SP65654\InsydeFlash.Log
    Settings file: C:\SWSetup\SP65654\platform.ini (found)
    Executable: C:\SWSetup\SP65654\InsydeFlash.exe
    Version: 4.5.6.1 build: InsydeFlash
    Date: Mon 21 Oct 13:11:30 2013

    Resource file: C:\SWSetup\SP65654\iscflash.dll (load)
    Application name: InsydesFlash
    Information of the operating system: Microsoft Windows 8 - supported
    M - FD: 0 0 0 2 does not match FFFFFFFF & 1963103 C! = 1962103 C
    M FD: Match!
    M - FD: FD name 01966.fd
    IHISI Version: 204
    M - FD: 0 0 0 2 does not match FFFFFFFF & 1963103 C! = 1962103 C
    M FD: Match!
    M - FD: FD name 01966.fd
    sH19Infor.dwBootBlockInfo: 10 d
    Check of sign of starting block: 1
    The status of function block start: 4
    Lock status of the EC: 8
    Sign checks number of items: 0
    BBL level: 2
    M - FD has achieved:
    01966.FD
    Offset: 7380688
    Allow Version: 000, Dex: 0
    Current version: F.53, Dex: 3923
    Current BIOS version is greater than the version installed in the Ini.
    SearchVolumeFileAndCreateDirectory
    SearchVolumeFileAndCreateDirectory
    SearchVolumeFileAndCreateDirectory
    SearchVolumeFileAndCreateDirectory
    M - FD has achieved:
    01966.FD
    Allow Version: 000, Dex: 0
    Current version: F.53, Dex: 3923
    Current BIOS version is greater than the version installed in the Ini.
    Partition: 1 WMI 0x0D: 1
    Check the package: 1
    Sign of the BIOS: 1
    BIOS size: 0 x 00800000, SHA1 sign size: 0x00000000, SHA256 sign size: 0x00000100
    Sign of the file: 1
    Open the file C:\SWSetup\SP65654\01966.fd
    No sign of present
    Reading 8388608 bytes of the file starting with 0...
    The BIOS image size: 8388608 (0 x 00800000)
    sH19Infor.dwBootBlockInfo: 10 d
    Check of sign of starting block: 1
    The status of function block start: 4
    Lock status of the EC: 8
    Sign checks number of items: 0
    BBL level: 2
    Current BID: 0008EFA0, new BID: 0008EFA0 size of BIOS: 00800000
    non_shareEC Ec starting address: 00000000, end of Ec address: 00000000, current size: 00010000, new size: 00010000

    Preparation stage

    Error code: 3010 (0x00000BC2)
    Cleanup phase
    Step completed
    -Newspaper arrested: 2014/04/17 22:06:11

    Problem solved with the permission of edsilha response: http://h30434.www3.hp.com/t5/Wireless-Internet-Home-Networking/Wireless-button-stays-orange-Will-not-turn-on/m-p/914285

    HP technical support comes to walk me through the resolution of this problem.

    1. remove the battery and unplug the power supply

    2. press and hold the power on button for 30 seconds

    3. allow battery but to plug the power unit in

    4. Press power button, then press the f10 key immediately (a number of times)

    5. the bios Setup menu appears

    6. select Reset default values

    7. Select Save and exit

    System boots and the wifi key changes from orange to blue

  • I can't get my Vista after update BIOS on the Satellite a series

    Hello!

    I downloaded yesterday new bios of the official website of toshiba... And I updated it!
    Now I can't get Vista from recovery cd... Please help me! What is c?

    Thank you!

    First of all, it would be useful to know your name of the laptop computer and that you used the version of BIOS.

    Are you sure you used the right BIOS?

  • ENVY 15 t-ae000: (F2 and F3) brightness control keys do not work after update bios and Windows 10 update

    After that I upgraded to the latest version of the BIOS and upgraded to Windows 10, brightness controls no londer work.

    Would appreciate any help.  Thank you

    Hello

    If your laptop uses Nvidia Optimus (Intel + Nvidia GPU), try to download and reinstall the Intel HD graphics driver on the following link.

    http://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74569.exe

    When reinstalling, restart the laptop.

    Kind regards

    DP - K

  • Satellite Pro A300 (PSAG9E) - after updating BIOS Windows will not start

    Restart went well after update BIOS and Windows XP logo appears loads for a few seconds then a beep and restart - last good known or start Windows normally same effect.
    Reboot back to start - this is a new laptop - using the BIOS of Toshiba s official download site.

    Quite annoyed to try to find a way to upgrade or downgrade the BIOS.
    Took battery and RAM to see if I can delete it?

    Any ideas anyone?

    I think you mean BIOS * update * and do not upgrade ;)
    An upgrade is not possible

    However, you can try to remove the battery and the AC adapter and wait an hour. After that, reconnect the battery and the AC adapter and try to start Windows.
    Moreover I would load the default settings in the BIOS before starting Windows.

    If it doesn't work, it seems that your ROM module needs to be reflashed. In this case an ASP can help you.

  • Checking update Java plug-in does not show latest version after update same

    Checking update Java plug-in does not show latest version after update same

    You exit and then restart your browser after Java update in order for the right version of Java to display the Plugin Check page. I felt it necessary to do so.

    See also:

    Other - you should check your Plugins and update as needed.

  • Pavilion g6-2215sia: CARD without WIRE NOT DETECTED AFTER UPDATE BIOS

    Recently I have updated my BIOS on my laptop HP Pavilion g6-2215sia think he'll adjust the hardware acceleration feature missing in my system (there is no option in my BIOS to enable virtualization technology). My BIOS version was F.12 and I've updated to F.24, but after update BIOS all my wireless functionality no longer works (including my wifi and bluetooth), and still there is no option to enable virtualization technology in my BIOS settings. On my Windows 8.1 x 64 Pro wifi and bluetooth options are grayed out so I can't turn them on or off. I tried to reinstall my bluetooth driver, but the software says that it doesn't detect any bluetooth hardware. Even when I restart and boot in all my Linux distributions installed on my system (Ubuntu, Quina and Kali Linux) and my x 86 Android, they still do not detect my wireless capability (says Ubuntu, "wifi is disabled by hardware switch").

    To confirm that this was not a software problem, I has conducted an audit of start-up and tested for my wireless module and got this result, "without WIRE MODULE CHECK: NOT INSTALLED". The only way I can get my Windows operating system to recognize my wireless (wifi and bluetooth) is now by doing a hard reset, when I unplug my laptop from the power supply, remove the battery and hold the power button for about 30 seconds. When I turn on my system, then I can turn my wifi/bluetooth on my Windows. But if I restart my system the problem comes back and I can't turn on my wireless. So basically, I have to avoid questioning my system off and only Hibernate, so that whenever I turn on my laptop I can use the wireless. If I restart my system so I have to repeat the hard reset in order to use my wifi/bluetooth, which can be very annoying.

    The problem is that I often use my other Linux disributions and I have to restart before starting in them so that my readers will be mounted read/write, and when I do my Linux can not detect my wireless and it's a serious pain for me because I need to use my wireless often for internet connection.

    Please I really need help on how to fix this and get my wireless working normally without having to do a hard reset every time. I tried to restore my BIOS F.12 unfounded but I don't have the image file (I extensively searched the Internet to find, but does not). I've even updated again to F.26 but I still have the same problem (my current version of BIOS is F.26).

    If you see no updates the BIOS in your list of drivers - where do you have the updates to the BIOS, you used?

    Try here - if you do not see the list of the BIOS, use the "Edit" button to change Windows 8.1 to Windows 8:

    http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G6-2200-notebook-PC-series/5296082/model/5315061

  • Computer does not recognize the monitor after update of Win7.

    Computer does not recognize the monitor after update of Win7. Have a projector connected to the computer with the monitor; from clogging the last evening updates have been installed. When the computer has been restarted this morning the monitor is entered but did not detect a signal and fell asleep: do not get an image on the monitor or projector.  Suggestions?

    It is a laptop?

    And if you start in safe mode?

    Desktop

    Haven't tried safe mode
    Disconnected the projector, and then restarted; back to work now!
  • My subscription Creative Cloud amounts and the teacher would not be repeated even after update payment information

    My subscription Creative Cloud amounts and the teacher would not be repeated even after update to payment information. I tried many times in the past two months, updating credit card information and I was never renewed. Subscription keeps saying expired beyond the 24 hour mark it says it will take. I have double and triple checked the information of credit card and have recorded several times. I also never get an e-mail confirmation or an e-mail saying that he had a problem. It is also very frustrating that it doesn't seem to be a customer service number to call especially for customers who have paid for the subscription of creative cloud. Help, please!

    Phone support | Orders, returns, exchanges

    http://helpx.Adobe.com/x-productkb/global/phone-support-orders.html

    To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
    Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

    Creative cloud support (all creative cloud customer service problems)
    http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

  • HP pavilion g6: I get this code after pressing bios password three times. 78120018

    I get this code after pressing bios wrong password three times. 78120018

    @Wastur

    Enter 67888038

    Kind regards

    DP - K

  • First pro cc application failed to start properly (0xc000001d) click on OK to close the application. I get this message after update software. Help, please

    First pro cc application failed to start properly (0xc000001d) click on OK to close the application. I get this message after update software. Help, please!

    Hi RC,.

    Update first Pro CC 2015 (9.2).

    Thank you

    Kevin

  • Touchpad no longer works after update BIOS on Satellite A500-1GL

    Hello world

    I just bought my laptop Satellite A500-1GL today. I started at the top and plays a bit (nothing serious). The touchpad worked very well at the moment.

    Then I discovered this tool to update the material and the update of the BIOS that worked without any problems. After I restarted the laptop, BIOS, loaded the default values of the installation and recorded.
    After that Windows 7 (x 64) started the touchpad no longer works...

    I downloaded the driver here and installed again once, still does not. I went into the BIOS, disabled the touchpad (I thought that maybe it's a bug...) and started again. It still does not...

    I enabled it again in the BIOS, tried to push the function + F9, but it still does not... Finally, I used the recovery and installed a Windows 7 costs.
    But unfortunately it still doesn't.

    Now, I'm out of ideas, can anyone help?
    Is there a chance to get the older version of BIOS to downgrade it?

    Thanks in advance ;)

    Hello

    It seems strange that after update Bios touchpad no longer works.

    > Is there a chance to get the older version of BIOS to downgrade it?

    To be honest, I don't know where to find. In any case, do a search on Google. Perhaps, other users of the forum can give you a link to download.
    The downgrade of the Bios is riskier upgrade procedure. So, be careful the next time...
    Advice for the future; Do not touch the running system.

    Good luck!

Maybe you are looking for

  • Back to Vista

    Hello. I've got this pavilion. Initially equipped with vista OEM. I have upgraded to Win 8, but marry to have a terrible time, adjusting, if I want to go back to Vista, that she was very happy with. Now, it's not that easy, leading the "Restore defau

  • Lose the links to external HARD disk of

    If I import something in iTunes 12.3 from an external HARD drive, as soon as I turn off the computer, or remove the external hard drive, he'll never find the files again, even if the drive designation is the same. Why? How can I prevent this? Wheneve

  • Where can I find the software for my model 1027 keyboard and mouse 1007?

    I have software 6000 for microsoft wireless comfort keyboard and mouse, I have a new computer, but the disk is missing, where can I find the software on the Microsoft site?  I have exhausted my resources as hardware microsoft pages do not list my key

  • Lack USB controller Windows Vista Edition Premium XP 2 420 family

    Windows Vista Home Premium XP 2 lack USB 3.O Host Controller, how can I get USB Controller

  • Windows never control your system and CALL YOU if they see you have questions?

    I received a call from someone saying that they represented WINDOWS and they had followed my system (because I registered my laptop) and they have a detected problem and they wanted orders me to go to the EVENT VIEWER to make some changes that would