DemoShield player. This error is not on the windows installation and it installs software on windows. Details as below

Similar Questions

• whenever I re - start the computer I get this error: could not load the file nta0104.dll.

  "original title: NTA0104.dll.

  whenever I re - start the computer I get this error: could not load the file nta0104.dll. How can I fix?

  HM

  Hello

  Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Locking down system and now get error 'Could not load the profile user and loading of temporary user account' when you try to open a session

  When my computer is on suddenly power went and my system also closed that crashed without logging my user account. now, I started my computer and I tried to open a session in my account (having only one user account) but he goes to the temporary login account, it displays "could not load the profile user and loading of temporary user account if you make changes to this user account it will be erased when you connect after." What can I do? How can I solve it? I use windows xp.

  Original title: Temp user login

  Hi indhru,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Try the step after the connection to the temporary account below.

  1. Click on the Start menu.
  2. Type Regedit in the Run dialog box, and then press enter
  3. Access
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
  4. There is 1 line for each profile. Especially if a profile is bad there are 3 things worth visiting:
  • Make sure that the name of the key are not ends in ".bad".
  • Make sure the RefCount value is 0
  • Ensure that the status value is 0

• I get error U43M1D206 when you try to make updates in CC.  This error is not on the Adobe help pages. Any suggestions?

  Correction U43M1D206!

  Hello

  See the following topics:

  Update download error U43M1D206 PS CC

  Error U43M1D206

  Hope that helps!

  Kind regards

  Sheena

• I have Dreamweaver 5.1 and I'm launching the browser widget and get this error "could not get the Widget feed.» Make sure that you are connected to the internet. Unknown error. »

  I see they recommend I'm going to https://creative.Adobe.com/addons to get the widget browser but I see nothing in this Web page regarding a browser widget. Can someone explain to me what I have to do. I'm almost done with a Web site with dreamweaver 5.1 and to redo the CC would mean that I have to relearn a lot of the program and I have a client waiting for this Web site. I'm very grateful for any help I can get. Thank you

  Adobe pulled the plug on the Widget browser a long time ago.  The servers so that they are more active.

  Use the page Adobe modules.  Or use a jQuery plugin.

  Adobe Exchange

  https://jQueryUI.com/

  Nancy O.

• Animate FancyBox iframe in Edge - do not show the correct height and width

  Hi all

  Can someone please provide advice or a solution to this problem.

  I tried to use the edge Fancybox.js animate to call an iframe (as a pop up album).

  However when I try this it does not show the correct height and width properties - even though I am their definition.

  When I test this on my hard drive it works fine in Chrome and Firefox. But when tried on line on a test server I get a slim pop up that has not properly set the height.

  Would be - because the iframe is pre-configured before composition/html page first affecting the size?

  Help, please

  CODE USED:

  $. fancybox.open)

  {

  type: "iframe"

  autoScale: 'false. '

  height: '600'.

  Width: '600',

  HREF: 'llink.htm site publication. "

  }, {

  padding: 0

  });

  Other references: http://businessanywhere.biz/blog/2013/03/adding-a-lightbox-to-edge-animate/

  See you soon,.

  Jason

  HI koyissa,

  Thank you for your response to this.

  I worked on what was the problem - my external publication that was created to animate dashboard was centered horizontally and vertically.

  He created the problem. When I took this out of the box of fancy worked well.

  See you soon,.

  Jason

• How can I get rid of the error "this computer is not running genuine windows? I feel I have tried everything.

  I tried several of the fixes discussed on mine, the problem of the popup saying "this computer is not running genuine windows". I'm tired and ready by using Microsoft. I bought this computer with windows installed in 2011 and about a month ago I got the error. When I look at the properties of my computer, it says windows is activated. Help please.

  As expected...

  I downloaded a file - sluicom64.zip - for my OneDrive to OneDrive Christmas

  Please download and save to your desktop.

  Right click on the saved file and select extract all...

  Save it in the default location

  This should create a file sluicom64.reg

  Right-click on the file and select Merge

  Accept the warnings, you should then get a 'Success' message

  Close all windows and restart.

  Run another MGADiag report and view the results.

• Error "this computer does not meet the minimum requirements for installing the software" when you try to install Intel_ME_Driver.

  Original title: error this computer does not meet the minimum requirements for installing the software

  I tried to install Intel_ME_Driver because I have updated my pc to win7 for win8 when I try to install they showed me an error message saying: this computer meets the requirements for the installation of the software need to I do?

  Use the Intel Driver Update utility

  Utility update Intel drivers allows you to get the latest drivers for audio, network, other components: http://is.gd/jQGR7

• Error installing Microsoft NET Framework 3.5 Service Pack 1 Setup program has detected that this computer does not meet the requirements to install this software

  I need to install Microsoft NET Framework 3.5 Service Pack 1, as it is necessary to perform a Dell diagnostic Test, but I've been advised that: Setup has detected that this computer does not meet the requirements to install this software. Requirement: Windows install 3.1.

  However, when I look at the download page of Windows Installer 3.1 is not actually as for XP with SP3. I tried anyway and: Setup has determined that the version of Service Pack for this system is newer than the update you are applying. There is no need to install this update. Well actually it is there...

  Is there a way to get around this?

  See below articles for solution

  1 system requirements for the .net framework

  http://msdn.Microsoft.com/library/8z6watww.aspx

  2 download links for .net framework

  http://www.Microsoft.com/net/download

  or

  http://msdn.Microsoft.com/en-us/library/5a4x27ek

  3. top 8 resources for .net framework

  http://www.Microsoft.com/net/itprofessionals

  4 dependencies and Versions of .NET framework

  http://msdn.Microsoft.com/library/bb822049.aspx

  5 frequently asked questions
  http://msdn2.Microsoft.com/en-us/netframework/aa497323.aspx

  6. management of versions, compatibility and run side-by-side in the .NET Framework
  http://msdn2.Microsoft.com/en-us/netframework/aa497340.aspx

  Good luck

• Error "this Setup does not support the target platform.

  I need solve the problem 'this Setup does not support the target platform' Please help me :'(

  See these two sites:

  http://forums.Comodo.com/install-Setup-configuration-help-CIS/this-installation-does-not-support-the-target-platform-t59001.0.html

  http://forums.Comodo.com/install-Setup-configuration-help-CIS/firewall-wont-install-this-installation-does-not-support-the-target-platform-t61629.0.html;msg434058

  Comodo is apparently the problem.

• error: could not write the destination file (1 003)

  I am trying to export 40 photos of Photos.  I just installed OX El Capitan.  Only 13 of them get downloadable.  For the rest, I get this message: error: could not write the destination file (1 003)

  I tried to manually fix the library but still does not work (command + option + opening photos).

  And I do not have a backup on icloud photo library I have a backup on an external drive...

  You try to export the originals of your photos or revised versions?

  When you try to export photos to?

  You try to export to a folder on your system drive or a folder on an external drive?  If an external drive, which is the file system? And how the player is connected?

  You have permissions to write to the folder, when you export to?

• When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  This has happened

  Each time Firefox opened

  I tried to download firefox.

  User Agent

  Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS - RTC LM 8)

  When you click on the download link on GetFirefox.com, you should be asked if you want to run or save the file. If this situation occurs when you try to run the download, try instead to record and put the file on your desktop or in a similar place, where you are certain that you can find.

  When the download is complete, try double-clicking on the downloaded file in the normal Windows Explorer (browse your way to the file from the desktop). This should start the installation.

  If, in the Explorer window, you notice that the file seems to be missing the Firefox icon orange/blue, right click the file and select Properties. The image should look like the attached picture (except that mine is in Danish, but that is irrelevant) if saved correctly - if it don't look like this, would you please describe the content or attach a screenshot of the box. Especially what it says under "File Type" - it must be 'program '. If this isn't the case, will have to focus on what could be the problem here.

  A bit off-topic, your Internet Explorer seems to be quite a bit outdated (IE 6, where the current version is IE 8), so I highly recommend that you try to run Windows Update to get your system up to date. Is it as a society (such as a thin client Terminal Server computer) system, this is not possible, and most likely, your system administrator will have to help you.

• Satellite U405 - S2833 Fingerprint error: could not open the sensor

  Hello, I am very new to the forums so I apologize in advance if I don't give all the necessary accurate information in this thread.

  I have a Toshiba U405-S2833 and it came with the TrueSuite Access Fingerprint Software.

  I downloaded an update a few days ago, but I don't remember if it's for Vista or Toshiba. Since then, my fingerprints were all removed from the system, and when I try re - save, I get this error message "error: could not open the sensor" I can't find the material to fix the sensor manually without going through the TrueSuite software.

  Any help would be greatly appreciated.
  Thanks in advance

  I am also having the same problem.

  My boss uses a Satellite U405-2628 fingerprinting and with the sensor TrueSuite Access Manager. It worked fine, then I updated windows and it has stopped working. I was on the updates and noticed an update of TrueSuite and thought that maybe that was messed up things.

  Then there were other issues that went past me locked out of the machine (anti-virus and loss of relationship with the field... also my fault). So I decided to wipe the machine and install fresh Vista.

  I installed everything but the TrueSuite software still not able to open the sensor. After hitting my head on it, I decided enough was enough and I restored it using Toshiba recovery disks.

  It took a few hours and here I am logged in as administrator and the TrueSuite software still cannot open the sensor. I don't know what I can do, since it is to return to the factory settings.

  As the above poster said, HELP!

  Thank you.

  ... a little later...

  Well, I managed to do work, and this can be useful for some people out there since I found no easy answers. I can't guarantee anything, and it's really complicated... so here go us.

  First, I downloaded the latest update from Toshiba (util_fingerprint_27460A.exe) and nothing has worked.
  Then I uninstalled the sensor since (click right, uninstalled) Device Manager to uninstall the driver as well (it should invite you to do so)
  Then, still in the Device Manager, I scanned for new hardware and it came with my sensor. I said to look for drivers and when he could not find, I think it gave me an option for windows search for an answer... or something like that. He came back with a link to Authentec (www.authentec.com/win7update/w7wbf32.exe, I think). So I downloaded that and installed. He rose through the device under "Biometric devices" then before... I think it's under the "Personall security device" or something like that. But alas, still no luck. So I uninstalled all the device from the Device Manager (taking care of uninstalling the driver as well) and of the TrueSuite software. Then came the break I was looking for.

  Online research I came across this page... http://members.driverguide.com/driver/detail.php?action=download&driverid=1194755. I had the chance before to DriverGuide.com so I thought what the heck. It is a driver of HP for the same sensor and it is dated 2006. So I downloaded and installed. Still nothing...

  Disgusted, I thought, well let's try to install util_fingerprint_27460A.exe on top of that. So I did, restarted and I couldn't believe my eyes when he said to connect and register fingerprints not seriously. And so I did. I hope this helps people, I don't really know how the sensor I so messed up, but I'm glad it worked.

  Yet one thing... and this may be important. When I took TrueSuite first after doing all this, he told me that the storage of fingerprints was full... or something in that sense. So I clicked the button remove all traces of fingers button and it I would like to register my fingerprints. I'm starting to wonder if that was all I had to do in the first place... Guess I'll never know.

  Good luck.

  Post edited by: rewind22x

• OSX EL CAPITAN UPDATE CANNOT BE INSTALLED TO THIS DISK. THIS VOLUME DOES NOT MEET THE CONDITIONS FOR THIS UPDATE

  Hi all

  My iMac features are:

  • 27-inch, late 2013
  • 3.2 GHz Intel Core i5 processor
  • 8 GB 1600 MHz DDR3 memory
  • Start drive Macintosh HD
  • NVIDIA GeForce GT 1024Mo of 755M graphics
  • Storage: 301,35 free GB of 999,35 GB

  Running currently on OS X El Capitan with Update Version 10.11.3 installed January 27, 2016

  Problem: I was on the purchase of 2016 Office for Mac and tried to install the update of El Capitan OS X 10.11.1 which is necessary to solve the problems with this version of Microsoft Office.  During installation, the following error message appears:

  "OS X El Capitan update cannot be installed on this drive. This volume does not meet the conditions required for this update".

  I would be very happy if someone can help me in installing this update.

  Thank you.

  Slpm6

  I just got a quick reply saying 'You are not allowed to create or update this content'. What should I do to solve the problem? Thank you.

  You are using a newer version of El Capitan that the updater contains and so cannot install it.

  (139598)

• Java with Minecraft error "error: could not create the Virtual Machine Java.»

  When I try to open Minecraft SP, it won't let me open and there is a message saying:

  "Error: could not create the Virtual Machine Java.".
  Error: A fatal error has occurred. Program will exit. »
  How can I solve this problem?

  Hello

  What is the operating system installed on your computer?
   
  You can ask your question on the Minecraft forums for assistance. Check out the following link.
  http://www.minecraftforum.NET/viewforum.php?f=1002