DemoShield player

Similar Questions

• DemoShield Player has encountered a problem and needs to close

  I am trying to install Retrospect Express 1.1 (I know its an older version but I like much better than the version 7.7, which it now markets). Installation stops with a DemoShield Player error, with the following details:

  Type of event: in Page error P1: 000009c P2: D00000005

  c:\DOCUME~1\Owner\LOCALS~1\Temp\WER4175.dir00\DEMO32.exe
  c:\DOCUME~1\Owner\LOCALS~1\Temp\WER4175.dir00\appcompat.txt

  Hi PaullamYQ,

  Follow the suggestions below for a possible solution:

  Method 1: I suggest to run the Microsoft Fixit and then try to install Retrospect Express 1.1.

  Solve problems with programs that cannot be installed or uninstalled

   http://support.Microsoft.com/mats/Program_Install_and_Uninstall

   

  Method 2: You can take possession of the appdata folder, and then try to install the program.

  To open the folder, you can follow the steps mentioned below:

  a. press Windows Key + R

  b. type %APPDATA%\protector.exe and press on ENTRY.

  To support, you can see the article mentioned below:

  How to capture a file or a folder in Windows XP

   http://support.Microsoft.com/kb/308421

  Let us know if that helps.

• Demoshield Player encounters an error

  Demoshield Player encounters an error when you try to install simple accountant.  Can you help me

  Hello

  1. What is the exact error message?

  2. you remember any changes made to the computer before the show?

  I suggest you perform a clean boot and check if that helps, check out the link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 of article, to prepare the computer to start as usual

  I hope this helps.

• DemoShield player. This error is not on the windows installation and it installs software on windows. Details as below

  Hello

  When I try to install my seagate Disk Manager. DemoShield player no longer works and I can't install it. Please help to solve.

  http://www.Seagate.com/www/en-us/support/downloads/DiscWizard

  Try Seagate Suport to the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• DemoShield player no longer works

  I want to install creative software and get the error message demo Shield player nicht mehr works.

  You want to do?

  Hello Volker Pilz,

  You can try in Compatibility Mode:
  If the program is not compatible, then you try to install and run the program in compatibility mode.

  Use the following steps:

  (1) right click on the program

  2) click Properties

  3) click on the Compatibility tab

  (4) select run this program in compatibility mode and select Windows XP or other system that the program has been run successfully operating.

  You might also want to right click and choose "Run as Administrator".

  Check out the link here: make sure to run older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If compatibility is not successful, then try and self-test program compatibility issues:

  1. open the program compatibility problems theStart button.

  Then click on Control Panel. In the search box, type troubleshooting tool, then clickTroubleshooting. Under programs, clickRun done for previous versions of Windows.

  2. follow the instructions in the troubleshooting.

  If you are unable to install a program, insert the installation disc for the program and, using the Troubleshoot utility, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. This utility is not designed to work on programs that have an .msi file name extension.

  Please answer back with an update and let us know if it helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• DemoShield does not when I try to load a game "Doom 3" and must close

  Works with Windows Vista/sp2. How can I fix DemoShield player so I can load any games?

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  If you get an error message when trying to load any game then post back the exact error message.

  First install the latest version of Demoshield player and check. Configure the computer to clean boot and then try to install the program.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start, type msconfig in the search box
  2. press ENTER.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  a. Click Start.
  (b) in the search box type eventvwr.msc, and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

• System Restore works do not (OS Windows Xp)

  Hello

  Recently tried to install a new pc game on the computer for my daughter to play.  Demo 32 error appears after several attempt I failed to install his game. Computer just froze and said I had a program is not responding, so after completing the program, he says that demoshield player is inadmissible. So I tried to do a system restore. I clicked on system restore to restore to an earlier date and I get nothing it does not work. I have just a blank white page. Tried f8 and signed to the title of administrator in safe mode to do a system restore here same thing there no chance. Not sure what's going on here. Go my computer (restoration is located in the tabs and said it followed two different readers if this tab is not absent it is there.) Help me I am at my wits end. Thanks for all the advice needed to repair this problem. Uninstalled my Kaperspy to see if that was the problem but to no avail it wasn't. Now, I tried to reinstall my antivirus and now I have another error system will not let me install. My system restore is there it controls so its not missing or uninstalled, but something I need to get the system restore to work. I don't want to have to reinstall xp again I have the disks, but not the product key codes can not find them.

  Thanks Jo

  Here is an article that can help with System Restore window blank:

  "Several dialog boxes are empty.
    <>http://support.Microsoft.com/kb/831430 >

  HTH,
  JW

• Information and performance tools

  These programs are causing windows close slowly

  Details:

  Name: unknown
  File name: demo32.exe
  Publisher: unknown
  Date reported: September 28, 2009 09:00
  Shooting: 159.9 seconds

  which application should I check

  Please update

  Thank you

  Hi vlakshmi,

  Welcome to the Microsoft Answers community.

  I will need more information to help you better.

  · Did recent changes to the computer?

  · Is this the first time you arrive on this issue?

  · Did you use any third party registry patches or updates recently?

  The following methods can help you solve the problem.

  demo32.exe is a DemoShield Player belonging to DemoShield Player. So uninstall it and run a scan for virus/malware online on the computer.

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=ad724ae0-e72d-4f54-9ab3-75b8eb148356

  If you are unable to find the program to uninstall, and then run clean install.

  To perform a clean boot on a computer that is running Windows Vista, follow these steps.

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.

  http://support.microsoft.com/kb/331796 . In addition, see the section on how to restore your computer to a Normal startup mode.

  Hope this information is useful.

  Let me know if it worked.

  Thank you, and in what concerns:

  Umesh P - Microsoft Support

  Visit our Microsoft answers back Forumhttp://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ and tell us what you think.

• My inner smartdrive dvd player won't read DVDs more.  I have updated to Snow Leopard in Yosemite.

  I am currently using OS X Yosemite 10.10.5.  I bought in 2009 iMac with Snow Leopard and have to Lion then updated my current operating system.  The internal dvd player has worked with much fussing, (insert the disc - closing - turn after a wait - by pushing the drive when he jumped on reboot).  If I had the chance after a few hours, the video disc show up on my desk.  When this happened, I was opening the dvd player that was in the Finder and the disc would play. I also tried to open the dvd first player and then insert the disc.  That no longer works.  Yesterday, only it just stop working.  The reader still takes dvd and swirls and click as before but then ejects the dvd. Repeatedly stop and restart is no longer works.  I make sure that the dvd be clean before I use it and have tried many different DVDs without success.  I think it's a software issue.  Does anyone have an idea/instructions a nearly dead grandmother brain that can follow to update or redate back to original factory setting to help this poor Smartdrive not so smart?

  I have no TV, only my computer and phone at low prices.  I need to watch that my library borrowed from the dvd.

  Thank you.

  Try a cleaning CD/DVD

  You can also try to clean by:

  How to clean a Superdrive DVD using a credit card!

  I suspect the optical drive has failed. My 2009 Mac Mini could not shoot with same symptom 4 years ago.

  To confirm a drive failure, insert a Snow Leopard installation DVD and try to start with the C key.

  If this isn't the case, they drive could not be started.

  I would just get an external optical drive, one powered with an AC adapter. The Superdrive Apple USB does not work without a hack.

  This is the Office Mac Pro forum. I asked that your post moved to the forum of Intel iMac or another appropriate forum.

• Flash Player ' scam? Popup of Angelfire server on Mac

  Unlike surf some websites hosted on the server 'Angelfire', someone has the last numbers to get annoyed at popup windows.  Every time when I visit a several sites hosted on Angelfire Server (http://www.angelfire.lycos.com), I keep getting too bored popups asking me to install the latest Flash Player (see screenshot below).

  

  Anyone of you can try to visit a couple of the sites hosted on Angelfire server example and see if you get similar popups like this snapshot above?

  http://www.angelfire.com/MT/FlyTech/area51.html

  http://www.angelfire.com/TV/squad51/fanfics2.html

  Please let me know.  I think that this popup annoyed in the snapshot could be a scam, so that's why I keep the closing down and do want to install in my Macbook Pro.  Take a look at my latest version of Adobe Flash Player.

  

  All the tips are greatly appreciated.  Thank you.

  If popups are a scam or not, having a version update of Flash of common sense. He represented s = allowing you to run animations and online videos.

  You can update Flash on the official website: adobe.com/products/flashplayer

• How to completely remove Flash Player on the MacOS Sierra?

  I want to delete entirely. Not only out of sight.

  Hello

  Follow the instructions here > https://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html

• DVD player freezes when audio editing

  My application DVD player recently started crashing every time that trying to change the volume of the silent era. The laptop is a MacBook 12 "retina 2015, using an external DVD drive that has worked very well for a year. Have tried on many different DVDs and they all load fine, DVD player auto-commence, but they all open with no sound. If I try to increase the volume of 0 on the slider, the player crashes. If I try to access audio via the menu 'Options' menu does load not for Audio and audio disk configuration is similarly frozen to corruption. Other audio works fine on the machine. Any idea on what could be the problem? Thank you.

  Greetings bhan001,

  Thank you for using communities of Apple Support. It seems you want to play a dvd on the MacBook connected via an external dvd drive. Given that the application crashes using each dvd that you tried it may be a problem with the application itself. There are a few things that we can try to isolate and solve the problem.  I would recommend you read these articles, starting in safe mode disables the 3rd party applications that may interfere with the DVD player application. If the problem persists, we can try a new user to test to see if it's a matter of profile or the scale of the system.
  

  Try safe mode if your Mac does not end commissioning

  How to test a question in another account on your Mac.

  Take care.

• Remove Java and Flash Player?

  I asked here how to install Java and Flash Player, and I think I did, but I'm not sure I have remove 100%. Is there a way I can see if they are deleted?

  For Java, open Termonal paste this back in & hit...

  Java-version

  For Flash...

  http://isflashinstalled.com

• How can I remove Flash Player and Java.

  I heard recently that Java and Flash Player are unnecessary and dangerous to have on your mac. I can't understand how to remove however.

  Someone told me to go to this link, is it reliable? (this is not a https that is why I asked.)

  http://Java.com/en/download/help/mac_uninstall_java.XML

  Download uninstaller for Adobe.

  You can find it https://helpx.adobe.com/flash-player/kb/uninstall-flash -Player-mac - os.html? sdid = 952G4XMS & skim803X112722X93c5ed8aaad2bcfb...

  There is a different version depending on the age of your operating system.

  Start the uninstall program of your download on your Mac folder.

  When the uninstall program runs, click on uninstall

  Enter your admin password and close all your browsers.

  Uninstall is complete it is also wise to delete the two folders, according to Adobe. These appear in the library of the House of the directory folder. Go to Finder, click on reach in the menu and press Alt (or Option) to present the case of the library as a menu drop-down. Look for these two folders and delete them:

  ~/Library/Preferences/Macromedia/Flash\ Player

  ~/Library/caches/Adobe/Flash\ Player

• bk 2011 pro Mac dvd player spits out dvd

  I have a 15 inch 2011 mac book pro. The dvd player does not work. When you insert a dvd into the computer, the computer acts like it's going to run it, but then he spits. She also shows an error message of the dvd drive on the launch pad. I use the dvd player / cd player a lot. Help, please.

  Hey glerouxwende,

  Thank you for being a part of the communities of Apple Support.

  I understand from your post that your MacBook Pro is not mounting dics and is just spit them back.  It's probably what is originally an error of the DVD player.  To help solve this problem, I would like to you please follow the steps below:
  

  Accepts discs, but they do not install or are ejected automatically

  1. Make sure that the drive is not placed in reverse. The aluminum case must be upward as shown in section 1.
  2. Check the surface of the disc for scratches and dirt, as these things can prevent the disk on the desktop.
  3. Connect the SuperDrive for MacBook Air drive directly to the USB port of the computer instead a USB hub.
  4. Reset the controller management system (SCM).
  5. Make sure that your drive can read the disc type. The System Profiler or an Information system can provide additional information on the subject of what is supported by your computer media.
     • OS X 10.6 Snow Leopard or earlier: Open Apple System Profiler by choosing "about this Mac" from the Apple () menu. Then, click on details.
     • OS X Lion v10.7 and later: click the Apple () menu and hold down the Option key. Select system information in the menu.
  6. If the disc continues to not be recognized, Contact Apple or an provider of services authorized Appleor make an appointment with a Store Apple Store.

  Get help with the SuperDrive slot on your Mac computer loading

  Take care.