Dependency or service failed to start. / Loss permission on the Admin account

I recently started getting this message every time I try to run programs or services. I can't run anything with admin privelages, nor that I can UN - do the last change I made, which was to allow the activity of user controls.

What I can do: connect to the Internet. Play games or run programs that do not have the windows icon of security around them.

I can not do: run a program as administrator. Update Windows Defender. Start programs that have to do with my antivirus. Change or open security or system settings.

Any ideas on what went wrong past and how to solve this would be wonderful.

I just finished check that something based on the installation of another program. In doing so, I noticed that my system, administrator and user permissions have been limited, and a TrustedInstaller got all permissions. All I am allowed to do is read run, or read. How can I get my return authorizations?

Hi Balduron04,

You did it changes on your computer before the problem?

I suggest you start in safe mode and do a System Restore in safe mode until your computer was working normally and check if the problem persists.

Azeez Nadeem - Microsoft Support [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

Tags: Windows

Similar Questions

  • I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service is not...

    Original title: Journal of spooler

    I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service does not exist or has been marked for deletion. I tried this diagnosticTo start print spooler service and also long-term arer services set it to automatic, follow these steps.     a. Click Start, right click on my computer and select manage.  b. in the console that opens, expand the menu Services and applications.  c. click Services.  d. click the button twice to spool print.  e. in the 'Général' tab, go to Startup Type.  f. the Automatic value.  g. click on the Start button.  h. click on apply and Ok.     Click the Dependencies tab, and not all the dependency services and repeat the steps above to set automatic and start the service.      Restart the computer after you start the services above. After restarting the computer check if you can install the printer. And a few others. Someone at - it suggestions? This printer has been operational on this computer at any given time. Windows XP Home / Firefox. .:

    Hello

    1. don't you make changes on the computer before this problem?
    2. when exactly you get this error message?

    Step 1: Run the fix it tool using the article below and check out them.

    Problems printing and printing errors
    http://support.Microsoft.com/mats/printing_problems/

    Step 2: Try the steps from the article below and check out them.

    Error message when you try to start the spooler service for printing on a Windows XP-based computer: "error 1075.
    http://support.Microsoft.com/kb/915168/en-GB

  • After a virus, I am unable to connect to the internet. Event log messages: the NetBios over TCP/IP service failed to start due to the following error...

    original title: NETBios TCPIP of missing in Device Manager

    I recently had to run two antivirus programs on an infected computer and am now unable to connect to the internet. When I went to the event viewer, I noticed the following error messages:

    Event type: error

    Event source: Service Control Manager

    Event category: no

    Event ID: 7000

    Date: 16/01/2012

    Time: 12:31:17

    User:                       N/A

    Computer: JARRIOUSSTUDIO

    Description:

    The NetBios over TCP/IP service failed to start due to the following error:

    The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

    Event type: error

    Event source: Service Control Manager

    Event category: no

    Event ID: 7001

    Date: 16/01/2012

    Time: 12:31:17

    User:                       N/A

    Computer: JARRIOUSSTUDIO

    Description:

    The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

    The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

    Event type: error

    Event source: Service Control Manager

    Event category: no

    Event ID: 7001

    Date: 16/01/2012

    Time: 13:32:01

    User:                       N/A

    Computer: JARRIOUSSTUDIO

    Description:

    The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

    A device attached to the system does not work.

    Event type: error

    Event source: Service Control Manager

    Event category: no

    Event ID: 7001

    Date: 16/01/2012

    Time: 13:32:01

    User:                       N/A

    Computer: JARRIOUSSTUDIO

    Description:

    The helpdesk TCP/IP NetBIOS depends on the NetBios over TCP/IP service which failed to start because of the following error:

    A device attached to the system does not work.

    When I look in the Drivers folder, I see netbt, but devices & Non Plug and Play Devices, of TCPIP NETBios is not listed in Manager.

    Hi Diddy Dell,

    Follow these methods.

    Method 1: Performs a search using the Microsoft safety scanner.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    Method 2: Follow these steps:

    Step 1: Start the computer in safe mode with network and check if the problem persists.

    A description of the options to start in Windows XP Mode

    http://support.Microsoft.com/kb/315222

    Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start, run.

    (b) type msconfigand click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click on restart to restart the computer.

    Method 3: Follow the steps in the article.

    How to reset the Protocol Internet (TCP/IP)

    http://support.Microsoft.com/kb/299357

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  • The NVIDIA NDIS IO Control Driver service failed to start

    NVIDIA NDIS IO Control Driver service failed to start due to the following error: the system cannot find the specified file.

    It's the correct driver.

    Ooohhh, you see in the event Log?

    I looked in the NVIDIA forums and found this:

    http://nvidia.custhelp.com/cgi-bin/nvidia.cfg/php/enduser/std_adp.php?p_faqid=262&p_created=1117061806&p_sid=qP2bKYVi&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MiwyJnBfcHJvZHM9MCZwX2NhdHM9MCZwX3B2PSZwX2N2PSZwX3NlYXJjaF90eXBlPWFuc3dlcnMuc2VhcmNoX25sJnBfcGFnZT0xJnBfc2VhcmNoX3RleHQ9bmRpcw**&p_li=&p_topview=1

    I have some NVIDIA cards, but not this one, so I can't recreate and test the suggestion...

    If the RemoveNvNdis.exe does not work (I think he must disable or remove completely the service), looks like he's some NVIDIA service that tries to start when you reboot, it cannot be started for some reason any.  Looks like you don't need to start.

    If you can find it in the Services of XP, you could check the properties and set the startup type to disabled, restart and see what things look like.  (Do you know how?)

    If the mere presence of the Service in your list of Services, then you mind, you can also delete the Service entirely (I want to it later, just to be ordered if it is always hanging out).

  • What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

    What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

    Hello

    1. Since when are you facing this problem?

    2. What is the number of brand and model of the computer?

    3. have you made changes on the computer recently?

    BCM42RLY is a Broadcom network card driver. I suggest that you uninstall and reinstall the drivers and check if it helps.
    Uninstall or reinstall a device: http://technet.microsoft.com/en-us/library/cc725782.aspx

    Hope the information is useful.

  • I get an error saying "the BCM42RLY service failed to start due to the following error: the system cannot find the file specified. '.

    Log name: System
    Source: Service Control Manager
    Date: 17/07/2011-21:12:53
    Event ID: 7000
    Task category: no
    Level: error
    Keywords: Classic
    User: n/a
    Computer: ivan-PC
    Description:
    The BCM42RLY service failed to start due to the following error:
    The system cannot find the specified file.
    The event XML:
     
       
        7000
        0
        2
        0
        0
        0 x 80000000000000
       
        203523
       
       
        System
        Ivan-PC
       
     
     
        BCM42RLY
        %%d Ko
     
    original title: can someone please help...

    Hello

    1. you are using a Dell computer?
    2. What is the model number of your computer?
    3. don't you make changes to your computer before the problem?

    BCM42RLY is a broadcom driver. I suggest that you uninstall and reinstall the drivers.

  • Need permission admin using the admin account

    I was doing annoyed recently how my computer asked "permission to the administrator. I have an Admin account and a guest account, but I use only the Admin account. However, whenever I do anything it requires permission. This includes the removal of files, save files, moving files, rename files, etc. Even with the files and programs. I can't find the settings I lack, and it becomes really upset me.

    I should add that I'm still able to do things, it's just that it ask for permission each time. Any help would be appreciated.

    Thank you

    GeoB

    The feature you are referring is called User Account Control, or UAC for short. It is supposed to make your computer more secure, however, if you despise as many other people do, fortunately for you, there is a simple way to get rid of him.

    1. open start > Control Panel

    2. in the search box at top right, type in uacand select change user account control settings

    3. to turn off UAC, move the slider to never notify position. Save your settings and to provide your final confirmation. You will need to restart your PC for the changes to take effect.

    That's all

  • VCenter 6 Services fail to start on startup

    Physical server 2012R2 6 VCenter server stopped for hardware maintenance and booted up fine afterwards.

    During the shutdown, this event was logged in the application log:

    The description for event ID 1000 from source VMware VirtualCenter Server can not be found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

    If the event is on another computer, the display information had to be saved with the event.

    The following information has been included in the event:

    Launch of VMware VirtualCenter shutdown

    the message resource is present, but the message is not in the string/message table

    After starting most of the Vcenter services had not begun, nor could they be started manually.  I it goes back to the first failure recorded in the system log:

    The VMware HTTP Reverse Proxy service stopped with the following special service error:

    Incorrect function.

    I can't start this service manually, it fails with the same error.  All other services fail with an error of dependence.

    This is very frustrating, because we have upgraded this server from Server 2008R2 for the same reason, the service would not start.  When there are Server 2008R2 his running 5.1, we tried the upgrade to 6 but it failed and we couldn't solve it, so we completely removed Vcenter and tried a new install, it didn't until I managed to 'wrong' Setup by changing the Manager of VMware vCenter workflow service to run as local system if not always failed.  We have therefore installed and running, then after the first reboot comes to fail start services!  So we fresh installed Windows 2012R2, installed VCenter without any AV or other "crust" to make sure it would work, which was the case.  Now this 'thing' just continues to fail like that once!

    DNS is fine functiong and the server has survived a number of reboots yesterday, no idea why it does not now!

    James

    Thanks to the Ram from VMware support we figured out that WWW Publishing service has been installed, the value manual start, but has been started.  The VMware Reverse HTTP Proxy service is listening on port 80, so that caused a conflict.

    This was due to an installation of Veeam One, which has been deleted, but left the installed IIS components.  Gahh!

    Required ports for vCenter Server 6.0

    How to change the TCP port for Internet Information services

    Ports: Veeam ONE Deployment Guide

    Article KB of Veeam do not notify IIS components.

    I do not think that this question concerns the problems we had on Server 2008R2, but given that this facility is gone, I can't confirm.

    Solved

    Thank you

  • HAB check failed for start / could not validate the boot image

    Hello

    I have neglected my E bike for a few weeks and when I loaded and it fed today, it shows a menu and:

    HAB check failed to start

    could not validate the boot image

    Tried all the menu items and none of them worked. For me, it's very odd behavior, because BONE is not affected since the last Android 5 update, several months ago.

    Are there opportunities for the device?

    If you can't make an external reset via hardware buttons, then your phone will have to service.

  • User profile service failed Logon of a and I've invited account

    Okay, so here's the problem, my only administrative account I can't log in because the logon user profile Service failed. The only account I have is the guest account. I can't do anything with this account because it is not an administrator account. I understand the process of setting the logon service is deleting the account that does not work. If that's what the process of HKEY_LOCAL_MACHINE is the case, how can I make another administrative account with only a guest account and I hope to be able to recover some files I have on my administrator account. Please, help me! PS - Can - explain you the process of removing the SID? Thank you very much! In addition, what should I do if I tried the system restore and nothing has worked.

    This error can usually be fixed by following the steps below. All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

    1 log on to a different user account with administrative privileges. If you neglected to make an account additional administrative steps 2-3. Otherwise, continue to step 4. See also General information on setting up user accounts in Vista at the end of this post.

    2 in Mode safe boot. This, by repeatedly pressing the F8 key as the computer starts. That you will get to the menu on the right where you can use your arrow key to select Mode safe [Enter]. The built-in Administrator account is disabled by default in Vista. However, if no other administrative accounts exist on the system it can be activated. If this is the case, you will see an icon for the administrator on the homescreen mode without failure. Login to the administrator.

    3 If you don't see the icon for the administrator mode safe account, then the built-in Administrator account is always disabled so you will need to work more. If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

    NET user administrator / Active: Yes [Enter]

    [Note: do not enter the brackets!]

    If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode.  Or you can do a repair file Vista bootable DVD in this link:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need the third-party burning software such as Nero, Roxio or the free ImgBurn (www.imgburn.com ) to burn the .iso image image file, not in the form of data.

    Now remove the rescue CD/DVD, you have done, reboot Windows and log on to the built-in Administrator account, you enabled.

    4. try a system restore to when things worked. If you can log in to your user account, you are finished. Otherwise, continue to step 5.

    5. the critical files are under % systemdrive%\users\user-account\ntuser. The ntuser.dat file is actually a registry hive. Run Regedit high and select HKEY_USERS and "load hive" in the menu. Now, go to:

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

    There is a line for each profile. If a profile is bad, check:

    (a) that the name of the key does not stop in ".bak" (remove .bak If it)
    (b) that the RefCount value is 0 (change it if it is different)
    (c) that the State value is 0 (change if different)

    Make the necessary changes, close Regedit and try to connect as this user.

    6. If that doesn't solve your profile, it is corrupt. When you do that, you should make a new Standard user account and copy your data to it. Do not delete the old account until you have recovered data you need!

    Once everything works, go to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

    Start Orb > Search box > type: cmd
    When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

    NET user administrator / active: No. [Enter]

    Exit the command prompt.

    General recommendations for creating users in Vista

    You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

    In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it can be more work you want to do. Better not to get into a bad situation at first.

    The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

    If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

    Start Orb > Search box > type: netplwiz [Enter]
    Click continue (or provide an administrator password) when you are prompted by UAC

    Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).
    MS - MVP - Elephant Boy computers - don't panic!

  • I'm an administrator, but some things still need permission from the admin

    original title: administrator...

    So, it's my computer... and I've updated from Windows XP. Well, I'm the only person who uses this computer and I am the administrator. Well, the account says I'm an administrator, but for some things, the only example I can think of is using the tool of Spybot 'Vaccination', says it requires the permission of the administrator to run completely. I don't understand what is happening, and I'm not good with the Control Panel, so I need help before playing with things and maybe screwing everything up, lol.

    BellGoRiiing wrote:

    So, it's my computer... and I've updated from Windows XP. Well, I'm the only person who uses this computer and I am the administrator. Well, the account says I'm an administrator, but for some things, the only example I can think of is using the tool of Spybot 'Vaccination', says it requires the permission of the administrator to run completely. I don't understand what is happening, and I'm not good with the Control Panel, so I need help before playing with things and maybe screwing everything up, lol.

    This is perfectly normal.  By design, even administrative accounts do not roll with full administrative privileges at all times.  This is one of the most important security features of Windows 7, called User Account Control (UAC).  It helps to ensure that, when running as administrator, nothing can "sneak by" and changes to the system that the user is not aware.

    User Account Control - Windows 7 features
    http://Windows.Microsoft.com/en-us/Windows7/products/features/user-account-control
    What are user account control settings
    http://Windows.Microsoft.com/en-us/Windows7/what-are-user-account-control-settings

    Bruce Chambers

    Help us help you:
    http://www.CatB.org/~ESR/FAQs/smart-questions.html

    http://support.Microsoft.com/default.aspx/KB/555375

    They who can give up liberty to obtain a little temporary safety deserve neither liberty nor safety. ~ Benjamin Franklin

    A lot of people could die rather that thinking; in fact, most do. ~ Bertrand Russell

    The philosopher never killed the priests, while the priest killed a large number of philosophers.
    ~ Denis Diderot

  • The MCSTRM service failed to start due to the following error: the system cannot find the specified file

    My computer starts rather suddenly gel with many applications.  Today it froze again once I finished a long email and was about to send.  I lost him of course.  My Event Viewer was the topic.  Event 7000, Service Control manager Eventlog.

    What can I do?  I have Vista SP2 64-bit.

    I'll add that the kernel_driver of Type 1 mcstrm following 1 State arrested Win32_exit_code 2 <0X2>Wait_hint Checkpoint 0 x 0 0 x 0

    Please... any help to fix... my computer keeps freezing. and I will need to get a new laptop or an Ipad, if the problem persists.

    Thank you

    Candy C:\Users\David> net helpmsg 2

    The system cannot find the specified file.

    Is that error on this post code, IE something deleted, probably your antivirus or you.

    For problems to explore, which has nothing to do with this post, try this (which covers almost any problem).

    Explorer

    Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

     

    To see if a fix is available

    In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution.

    You can also right-click and choose Details for more information. Post these details here. The name of the Module fault is important information.

    If the problem affects Panel press the Windows key + R and type wercon (or type it at a command prompt).

     

    Close the browser and start a command prompt

    • Close Windows Explorer
    • Start - All Programs - Accessories - right on command prompt and choose run as administrator.
    • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
    • Press Ctrl + Alt + Delete then Task Manager.
    • Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.

    Then to restart the Explorer after trying all of the following

    • Press Ctrl + Alt + Delete and choose Task Manager
    • In the Task Manager, click the file menu and then click new task (run) and enter explorer
     

    If you cannot start the Explorer at all

    • Press Ctrl + Alt + Delete and choose Task Manager
    • Under the processes tab, click Show processes from all users to elevate to administrator
    • In the Task Manager, click the file menu and then click new task (run) and type cmd
    • Other things you can try typing

      Explorer
      Explorer c:\
      Explorer/e, c:\
      wercon
      control
      Iexplore
      Rstrui

    If you cannot start a folder window you can use the Browse button in the new task dialog. Don't forget that you must right click and choose Open rather than double-clicking.

     

    Reregister the shell registry entries

    It is important that each order is accepted. If the command fails it means the file is damaged and must be repaired.

    Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

    regsvr32 /i shell32
    regsvr32 /i urlmon.dll
    regsvr32 RPCRT4.dll
    regsvr32 PROPSYS.dll
    regsvr32 MSCTF.dll
    regsvr32 cscui.dll
    regsvr32 rsaenh.dll
    regsvr32 timedate.cpl
    regsvr32 ATL DLL
    regsvr32 OLEACC.dll
    regsvr32 actxprxy.dll
    regsvr32 USERENV.dll
    regsvr32 msshsq.dll
    regsvr32 NaturalLanguage6.dll
    regsvr32 thumbcache.dll
    regsvr32 WINTRUST.dll
    regsvr32 MMDevAPI.DLL
    regsvr32 audioses.dll
    regsvr32 audioeng.dll
    regsvr32 ExplorerFrame.dll


    regsvr32 msi.dll
    regsvr32 FirewallAPI.dll
    regsvr32 netshell.dll
    regsvr32 pnidui.dll
    regsvr32 QUtil.dll
    regsvr32 c:\windows\system32\wpdshserviceobj.dll
    regsvr32 WINHTTP.dll
    regsvr32 C:\windows\system32\qagent.dll
    regsvr32 C:\windows\system32\portabledeviceapi.dll
    regsvr32 wbemprox.dll
    regsvr32 wbemsvc.dll
    regsvr32 fastprox.dll
    regsvr32 imapi2.dll
    regsvr32 wshext.dll
    regsvr32 gameux.dll
    regsvr32 msxml6.dll
    regsvr32 vbscript.dll
    regsvr32 jscript.dll
    regsvr32 wshext.dll
    regsvr32 wshom.ocx
    regsvr32 wshcon.dll
    regsvr32 scrrun.dll

     

    Delete the folder and the settings of the Menu

    This will remove the settings are saved for each file that you visit. Also the order of the start menu and pinned list settings.

    Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

    Reg delete "HKCU\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell" /f

    Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams" /f

    Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StuckRects2" /f

    Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StartPage" /f

    Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\MenuOrder" /f

    Delete the thumbnail and icon Caches

    Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

    attrib - r s h '% userprofile%\AppData\Local\*.db '.

    attrib - r s h '% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db '.

    del "% userprofile%\AppData\Local\*.db".

    del "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db".

    Disable thumbnails and previews

    Damaged documents and particularly corrupt pictures or videos, can cause Explorer crash all trying to generate a thumbnail or an overview. This miniature and previews active option off.

    If you can start the Explorer, previews is Union on the command - folder and Search Options - framework of tasks use classic Windows foldersbar.

    Thumbnails are organized on the command bar - folder and Search Options - view tab - and check under Advanced settings - always show icons, never thumbnails and uncheck Show icon file in the pictures.

    If you cannot start the Explorer close Explorer as above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

    Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000001 f

    Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000000 f

    Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000000 f

    Turn around after testing the Explorer.

    Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000000 f

    Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000001 f

    Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000001 f

     

    A boot is a way to explore

    It can be caused by a shell extension.

    Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

    The Explorer is built on addin programs called Extensions of Shell. The standard is provided by Microsoft, but programs add their own.

    • Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
    • Close Windows Explorer
    • Start Autoruns by right-clicking and choose run as administrator
    • Click on the menu Options - Filter Options and check hide Microsoft entries and disable include empty locations
    • Go to the Explorer tab and uncheck everything to the left.
    • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
    • Press Ctrl + Alt + Delete and choose Task Manager.  Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
    • Click the file menu and then click new task (run) and enter explorer

    If this can help, reactivate ½ at a time to identify those who. If this does not help, restart AutoRuns and go to the all tab and uncheck everything that it and restart. If this can help, reactivate ½ at a time to identify those who.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see problems explore

    http://support.Microsoft.com/mats/windows_file_and_folder_diag/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    Recycle Bin
     
    If the problem is the trash bin remove the storage folders. It will be automatically re-created next time you delete a file or open the Recycle Bin. It will remove the trash and the files it contains for all users.
     
    Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
     
    RD C:\$RECYCLE. BIN/s/q
     
    then repeat for each drive to change the drive letter, for example
     
    d:\$recycle Rd. BIN/s/q
     
    e:\$recycle Rd. BIN/s/q
     
     
    If the Office does not start
     
    This will create a new empty by user and common desktop computer. This will allow to test if a file on your desktop to start the Explorer.
     
    Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
     
    MD "% userprofile%\DesktopTest".
     
    Add reg "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% USERPROFILE%\DesktopTest" /f
     
    MD "% public%\desktopTest".
     
    Tracking Add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" v "Common Desktop" REG_EXPAND_SZ /d "% Public%\DesktopTest" t f
     
    To restore default after having tested if begins to explore.
     
    Set ExpFix1 = % user
     
    Set ExpFix2 = % profile
     
    reg add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/f
     
    Set ExpFix1 = % Pub
     
    Set ExpFix2 = % lic

     
    reg add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v "Common Desktop" /t REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/f
     
    You will need to disconnect then.
     
     
    New entry missing folder
     
    If the above does not help.
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the NewFolder.reg.
      

  • VMmark2 PowerCLI Service failed to start: Loadtime =

    Hello

    I am not able to run the test on more than 7 tiles vmmark... strange...

    It works perfectly on 7 tiles, I get "vmmark2 powercli service was able to start" when you run vmmark on more than 7 tiles.

    I also tried to set the variables below without success.

    RMQ_WorkerDelay = 60

    RMQ_PowerCLI_Delay = 120

    Attached my file of results for 8 plates.

    Thanks in advance,

    Moshe

    Hello

    It works!

    I tried to put RMQ_PowerCLI_Delay = 120 without success.

    Thank you very much!!

    Moshe

  • Oracle Java host service fails to start

    I'm trying to start the Oracle Java host service but its failure to start giving the error
    *' Some Services stop automatically if they have no work to do, for example. performance services and alert *.

    This is an obstacle I in the starting of the OC4J service and, therefore, the presentation Service

    Are there specific changes, maybe I need to do in the environment variables... ? Currently, I have JDK1.5 installed in my system

    Appreciate any quick entries on this...

    Thank you!

    Why not post the details here to help those who may come after you for the same problem?
    And if you find useful messages please mark as such :-)

  • Event Viewer: Windows color system service failed to start due to the following error: the service did not demand launch or control in a timely.

    Whenever I start my Windows 7/64 on a motherboard Asus X 99 installation - WS pairs of the following event log entry are added in the journal of the repetitive events (12 times on every boot):

    ----------------------------

    -

    -

    7009

    0

    2

    0

    0

    0 x 8080000000000000

    38039

    System

    *******

    -

    30000

    Windows color system

    ----------------------------

    -

    -

    7000

    0

    2

    0

    0

    0 x 8080000000000000

    38040

    System

    *******

    -

    Windows color system

    % 1053

    ----------------------------

    What may be the cause of these event log entries?

    Hello

    Please keep us updated on the issue.

    To better understand Windows Color System, I'll refer to the article below.

    Windows color system

    I hope the information is useful. Feel free to write us if you have questions related to Windows, we will be happy to answer.

Maybe you are looking for