deploy programmatically variable shared within the standalone version of RT (cRIO-9014)

Similar Questions

• Using variables shared between the different versions of labview

  Hello

  I look at the use of variables shared between two different versions of LabVIEW. We have a 2 of the PXI system and a single PC. We are currently updating the code on the PXI system to 2014, but the PC still work 8.2.1. We now need a map of ARINC-429, which is executed only 2009 +, that is why we are to day. First tests show that shared variables do not communicate between the two. I think that the reason may be that the PXI running the version of variable motor 2014 shared, while the PC is running 8.2.1, but I don't know if it is precisely for this reason it does not work. Is there a way to communicate between two different versions of LabVIEW with shared Variables?

  Thank you!

  SOLUTION

  There are two key elements in the process of installing software that are essential for PXI to communicate with another version of LabVIEW: Legacy Server Support Variable and Variable Support of Legacy Protocol. The first, in charge of the Protocol, was automatically installed through the selection of the other ingredients (although I do not know which triggered its installation). The second has been nested in the Protocol, but was not selected automatically.

  

  

  The Protocol allows the PXI 2014 connect to shared variables hosted by devices 8.6 or an earlier versions, while the server allows before 2009 devices to communicate to shared variables hosted on PXI of 2014 (which was the initial problem)!

• Variables shared on the CFP becomes zero and communicate with the PSC

  I use a PC with two network cards, one on one wired ethernet, the other on a private IP directly connected to a PSC-2120 (running 6.0.5 full). I use variables shared on the CFP and aliasing to static variable on the PC (initially LV 8.6, now 2009f2 with the same problem in both). PC variables are stored in a database of the Citadel. I have the CFP program built to run at startup, and it works fine when not connected to the PC.

  When connected to the computer all variables shared on the CFP will from time to time (almost 1/min for a few seconds) and randomly becomes zero. Even if they are resized only not to allow to become zero. I can say that what is happening because I use the variables shared as relay alarm thresholds module, and relays to suddenly slam on. I confirmed this by checking that the CFP has written to its internal flash memory card, and indeed variables suddenly are nil. On the PC it says that it cannot connect with the shared variables. This happens although LabView is not running on the PC!  Manager distributed system variables shared on the CFP are listed as (disconnected) during this time, but it continues to be able to read the correct values to live of the CFP entered the module.

  Interestingly, I have the same computer with the same configuration (and a PSC-2120 different) that does not have this problem. Both PC's are new from the factory. I tried to disable the second ethernet adapter, closing all wall-lights/virusscan and re - order network cards in windows networking/advanced settings without success. Simply disconnect the cable between the PCP and the PC does not cause this problem and shared variables become zero does not trigger the network on the CFP monitoring parameters.

  My questions are:

  (1) this problem can be fixed?

  (2) lost communication for a few seconds is OK, but given the PSC variables become zero is not. Can I stop the variables of the PSC to become zero?

  -David

  To update my previous post, it turns out that the re-installation was not the solution (the problem of variables start again occurring began). I finally realized that this only happens when I put the CFP time server IP (under Additional Configuration to the MAX). I was upgrading the server time on 192.168.1.1 IP (the IP address of the adapter of the CFP has been directly connected to). However, this compensation setting solves the problem.

  I do not think that the time on the CFP must need to be addressed too often (and perhaps it is synchronized if I never re - deploy files to the CFP?), so I guess that leave it empty. Curiously, I have the same setup time on an another PSC server IP and PC (running LV 8.6) without problem.

  -David

• I have problems with the standalone version of Lightroom 6.

  I have a problem with Lightroom 6 - so much trouble that I'm currently impossible to use.

  (1.), I bought the standalone version of Lightroom 6 - CC No. I bought the disc, not a download.

  (2) I installed and used for months without any problem.

  (3) when I clicked on the icon on the desktop to open it - about three weeks ago, I got a message that I could buy (1) or (2) try it for 30 days. Of course, I couldn't choose one of these options because two of them would require me to pay for the program, either immediately, or within 30 days, if I wanted to continue to use it. If I deleted this message, Lightroom would not open. So, I was locked out Lightroom even though I had already paid for it.

  (4) given that I got the disc, I decided to reinstall Lightroom. This allowed me to use Lightroom again. I've been using this new facility without problem for several weeks; However, when I clicked on the icon of the office tonight to open Lightroom, I got the same message again: buy it or agree to a 30 day trial. So, I'm locked again.

  (5) I decided to install again. I managed to install the program on the disk; However, when I tried to open Lightroom, I received the message (not the exact wording): "you have installed Lightroom on computers too ' or maybe it was ' you used this serial number for facilities too - something along those lines." (I can't raise the message again, or I'll give you the exact wording). So now I'm completely locked.

  (6) before these challenges, I got Lightroom installed on my main desktop and on a laptop that I used when I travel. That's two facilities, and I installed twice on my desktop computer to try to circumvent the problems described above. However, I carefully watched my installed programs and there seems to have only a single installation of Lightroom 6 - no step three.

  (8.) I would like any suggestions to fix this mess.

  Thank you.

  Roger

  Hi Roger,

  My apologies for the trouble you've had to go through.

  I've updated your records and you should be able to use your license now.

  When you receive the message about the trial or a 30 day program, you should be able to choose the "Software license" option and activate using your key in order to to use without getting to re-setup.

  Concerning

  Claes

• Update KB937287 keep apearing as the only updated, try install many times, but does not work, tried it with the standalone version and it keeps apearing

  Update KB937287 keep apearing that the only update, tried to install a lot of times, but does not work, tried it with the standalone version and it keeps apearing, when I install it does not display an error message, just say that again was successful but when I try to look for more updated it apears again.

  Hi mayortom,

  Thank you for visiting the Microsoft answers Forum.

  You can follow the steps outlined in the article below:

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
  http://support.Microsoft.com/kb/910339/

  I hope that helps!

  Thank you and best regards,
  Abdelouahab Microsoft responds to the technical support engineer

• I had to reinstall lightroom 6.0 which now hangs permanently. installed from the DVD I BOUGHT. where can I find the update of lightroom 6.4 NOT CC plans, the standalone version!

  I had to reinstall lightroom 6.0 which now hangs permanently. installed from the DVD I BOUGHT. where can I find the update of lightroom 6.4 NOT CC plans, the standalone version!

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4|  6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Since then, I have the standalone version of Lr6 Apr2015 on my Mac. What will happen with my existing lrcat when I installed the test version?

  Since then, I have the standalone version of Lr6 Apr2015 on my Mac. What will happen with my existing lrcat when I installed the test version?

  nothing.

  but your lr6 will be probably transformed into lr cc and if you decide not to subscribe you need, How to convert a trial of Lightroom Lightroom 6 CC

  and if you want to open your lr6 catalogue in lr cc, Photoshop Lightroom Catalog FAQ

• I want to Lightroom6 of the trial, but the standalone version, not cc. I can't find this trial version.

  Hi all, I would like to Lightroom6 of the trial, but the standalone version, not cc. I can't find this trial version. In fact, I can't find the updated stand-alone version to buy! Please point me in the right be - thank you

  There is no specific test named 6 of Lightroom. The only test available is the trial of Lightroom CC. This is the only trial.

  If you choose to buy, you can buy Lightroom 6, without Cloud creative component, product (scroll down for LR 6)

• Renamed 3 variables shared on the network in Subvi to starting RT VI, now they won't write?

  Hello world

  I worked on an RT program deployed to our cRIO-9024 with custom FPGA, and I changed the way in which the data is written to these three types of DBL 1 d. I renamed the shared variables ("shvars") in the library of the RT project shvar and also changed the target to the PC for the debugging of the function of the code written for them. I used a struct of conditional compilation to turn them off and something has been corrupted along the way and the second node broken shvar (node moved directly from project, no programming style) and caused a hard compilation failure in the Subvi. I got the compile error and go after the removal of the node of shvar entirely and placing him again the project and everything seemed fine.

  Soon, I bring the Subvi RT application instance and build my RT exe and deploy it. On the host PC, this second shvar now not get written in at all. I hunt and chase and decide that something is wrong with the deployment of the shvars. I redeploy all and even delete all 3 of the nodes of these shvars in the Subvi and place them again. Now, all 3 are not be written to. My next step is to move the shvars out of this sub - VI I put them in but this is recommended? Note that sometimes they seem to get written once and then are forever silent after that. Is this because I use the nodes instead of the function of programming with shvar addresses?

  Thank you.

  Edit: Notice the same level superior RT vi successfully wrote in 19 other shvars that I have not touched.

  -Very well, I shot myself in the foot and was in fact barking the wrong tree. Put shvar nodes in a Subvi was well and not at all related to the problem.

  The problem is that I had a bug in my code FPGA in a particular case, that could get him to stop putting valid data. Once I corrected this bug, everything returned to normal. I would like to delete this thread, but a little shy is right for you.

• Network variables shared to the host PC

  Hello world

  I need to send the results of a time operation real PC to PC host without affecting the determinism on the PC in real time.

  To do this, I have two periods loops, the two race 417 microseconds, but at different levels of priority. Who runs the algorithm on the PC in real-time is a priority of 1000 and the other loop that transfers just results from the PC to the host PC in real time is a priority of 100.

  I measured the worst time taken to perform my loop of high priority to be 150 microseconds. I have so much time to send the results to the host PC. (I want to results updated all 417 microseconds).

  I run the algorithm for 40 seconds on the PC in real time. But the values are updated on the host at the end of 40 seconds PC and not at each iteration of the loop I want.

  What was my mistake?

  Kind regards

  Prashant

  Thank you all for the responses.

  I found my mistake. I had wired a variable directly from the first loop timed for the second timed loop. This is the reason why the second loop was still waiting and never run. I used dummy shared variables to transfer data between the loops. Now, the loop works very well.

  Thanks again

  Prashant

• Why the new dehaze feature is not available on the standalone version of Lightroom 6?

  I bought a stand-alone version of Lightroom 6 and see the new dehaze feature is not included, because it is in the CC version. This will be available in updates and especially can I get updates on a standalone version?

  6 Lightroom has the features that have been included, when it was originally released. The dehaze was not available at that time, even in Lightroom CC. Lightroom 6 does not receive updated functionality, only the camera support and bug fixes. All new features will be saved until / if Lightroom 7 is released. Then, you will need to decide if you want to upgrade. This upgrade will be a paid upgrade. It is not free. In the meantime, Lightroom CC will receive periodic updates which may include additions and changes to the features. Historically, Adobe has not updated in version updates. New features were only added when a new major upgrade became available. So there is nothing different in the policy of the service. Because you purchased Lightroom 6, you have all the features that were part of this program. You will have to wait for the next update to receive all the new features.

• Why is it not the bandwidth within the CS3 Version view Profiler?

  Hi all
  
  I am studying a course of Flash MX 2004 at Exeter College and my hand on wants me to enter the bandwidth within the view Profiler but my Flash version is CS3 and it is not there, if you could tell me where abouts she will be very appreciated.
  
  Thank you very much for reading this and maybe you respond to it.
  
  Kind regards
  
  Oliver

  Hi all

  By the process of elimination, I found that the bandwidth Profiler has been in the view menu on the section of the test file (when you press Ctrl + Enter). Stupid question, but I'm new to Flash and you seem to learn something every day! Thanks to the people who have helped me here.

  Kind regards

  Oliver

• iCloud storage can be shared within the family group?

  If I buy the extra iCloud storage, could be shared among the members of the family group?

  I am not afraid.

• How to create Adaptive sites within the new version of Muse?

  I have the 2015.1 upgrade and I made a site office with scroll effects. I want to keep the scroll on the desktop site effects and make Adaptive without scrolling sites so that my site will look as good on smaller devices. This feature was possible in the last version, but now I can not find. Is - this completely disappeared or is at - it another way to make Adaptive sites in Muse?

  I don't want to use a responsive design because then I won't be able to track the effects of scroll.

  Please answer quickly! I have a deadline coming tomorrow and I'd love to go to bed early tonight ;)

  Just look at the menu of 'Page' (-> Page/Add another layout)

  Hope transfer you for me some of the money, you now are able to win just by getting this vital information!

• where is the standalone version of Lightroom to download (UK)?

  I want to buy the standalone LR5 download but can't find anywhere on the site. It's deliberately hidden?

  Please can someone give me a link. I don't want a subscription to CC.

  It's deliberately hidden?

  Hidden do not as such but very difficult to find, unless you are familiar with the Web site. Plus all the links point to the cloud.

  Click Menu > all products (or the products in the footer link) and you find products

  There, you can always buy perpetually licensed products.