deploy the project with Ethercat
Hi all!
I need help. I created a project that consists of two parts. The host to run on a Standard PC (HMI display...), that the second part is working on a controller PXI (RT) linked to an Ethercat 9144. I have my project debugging and everything works perfectly, I am able to read variable Ethercat of host, send data to the RT using shared variables...
To complete my project, I wanted to create an exe for the RT. This is the beginning of my problems. I built the executable, set it as start and deploy the exe to the target. After rebotting target, I started the application on the host... Now, it is impossible to read Ethercat variables and variable shared. If I try to set up the shared variable or the Ethercat for the project, it stops the executable that runs on the target...
I have not found any documents that describe how to deploy variable Ethercat in an executable... Does anyone have an idea about this problem? any suggestion is welcome...
When running a windows project, libraries RT SV are usually defined to deploy automatically when the application of the RT is deployed. Also you can manually deploy libraries SV yourself project.
Once a SV belonging is deployed on an RT target that it will stay there until eliminated. You can verify your deployment with Distributed System Manager (DSM) If you see it then you're good.
Your RT exe cannot deploy its own libraries, they should be deployed in advance. In addition, you should be able to use the DSM to see the IOV engine on the 9144 chassis analysis even if your RT application is not running. Check this first. Also check the on your target RT .alias file to make sure it has the appropriate IP addresses to resolve any URL NSV.
Tags: NI Software
Similar Questions
-
Replace the charger in the project with sequence Panel
Hello! I would like to ask a question on the simplification of workflow that is walk around in my mind for years:
Is it possible to replace an element in the project with a sequence Panel?
The reason why: I have a music-video with LOTS of cuts between relatively little overall clips. For the adjustment of the colors in the first (or otherwise), I like to keep as much space for easy modifications as possible until rendering and so create a sequence for each clip where I apply these effects at once. In this way, I don't have to go through each occurrence of the sequence in my calendar to change the rating. While this works well if you have done the part of each movie clip before the cut, I have no idea how to achieve this easily once you already have your project cut with clips instead of clip-sequences.
Is there another way for the effects "on the scale of the clip" that I'm missing? Thanks in advance for the advice and help.
Best regards!If I understand your workflow?
Can have a look at the ranking of the main element.
Apply effects Master Clip in Premiere Pro
For it is possible to replace an element in the project with a sequence Panel? NO.
-
How to build the project with library error in adf adf
Hello
IM using jdev 11.1.2.3
in my project I module 2 so we need to build the project with adf dependency libraries...
Two copies of the way to build the project with trial and error in adf adf
Timo
-
How to deploy the project to my weblogic Server Application?
How to deploy the project in my weblogic Server Application? Wouldn't be great if I copy the folder of the project to the root of the ACE?
Also, how should I call Javascript context help assuming the project deployed to Weblogic As.
I use Robohelp 10.
Thanks in advance.
Hello
You generate to help and then you copy the output generated on the server.
For sensitivity to context, which is output are you using? Try the following
pages for more information:
Take a bow
Willam
-
Stabilization of the project with different video settings
If I open the project with the settings for video 1080 p and then add 720 p video, how can I make stabilization for her? (When I opened a video with different sequence settings it me does not make stabilization)
Is it possible to work in a single sequence with different settings of the video?
Images that do not match the nest of parameter sequence first, then add the string.
-
Error when deploying the project
Hello
I use JDev 12.1.3 and even managed server version 12.1.3, I'm trying to deploy the server SOA project, but the following error message appears:
Error deployment archive sca_PJT_CPC_APPS_rev1.0.jar to the 'SOA-TEAM' partition on server AdminServer [http://machine:7001]
HTTP error code returned [2000]
Error message from the server:
The server is not compatible with this client deployment: Please check that the server is a managed server SOA and its version is supported by the client deployment
Check the log of the server for more details.
Error deployment archive sca_PJT_CPC_APPS_rev1.0.jar to the 'SOA-TEAM' partition on server AdminServer [http://machine: 7001]
Undeployment.
-Incomplete deployment.
Deployment error archive file:/D:/Project/SOA/CPC_SOA_APP/PJT_CPC_APPS/deploy/sca_PJT_CPC_APPS_rev1.0.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
any suggestion?
Its configuration jdev and soa
-
Can not deploy the project to the server...
From the servers, it seems not a problem only a warning. But I can't deploy the soa on the server application.
17:02:17 problem by sending the HTTP request on the server. Check the standard HTTP response code for 502
17:02:17 error deployment archive sca_firstComposite_rev1.0.jar to soa_server1 zjwang - cn.cn.oracle.com:8001
17:02:17 returned HTTP 502 error code
17:02:17 that no error message is returned by the server.
17:02:17 # incomplete deployment. ####
17:02:17 error deployment archive file:/D:/SOA/samples/soa-infra/end-to-end/end2end-101-SOA-composite/end2end-101-SOA-composite/project/SOA-first-composite/firstComposite/deploy/sca_firstComposite_rev1.0.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)Can you check the following:
1. parameters of the proxy in your JDeveloper.2. If your SOA server is hosted on a multi-hosted (System with multiple IP addresses), and then set the address of the listening of your servers to one of the ip address that is accessible from the machine running the jdev.
For multihomed computers:
To get this thing working, follow these steps:
The customer jdev machine you ping your server, it will give you an IP address.Now to connect to your WLS administration Console. Select AdminServer. In the General configuration, set the listen to this IP address. Do the same for your SOA managed server. Now restart the servers. Try the JDev client deployment. It will work.
You can also paste exceptions in your soa server logs?
-
How to create the project with mutibple workflow (several BPEL files)
Hi all
I am newbie with Oracle BPEL. Now, I need to create a project with a lot of process (I mean a lot of .bpel files). So, how should I do. I see in JDeveloper, I only create a .bpel file in a project.
Can someone help me?
Thanks in advance
NguyenYou can call several BPEL processes in the BPEL process. He will not however be a project. You will need to deploy the BPEL processes to the BPEL process family school and work.
You say that you have a starting point. You should be able to achieve this with N flows, but another method would be to put a BSE on the front and the payload can call other BPEL processes.
see you soon
James -
transfer netlist to the project with 2 models
I have a project ultiboard with two drawings of Board residing in it. I transferred a Multisim schematic/netlist to the first of the designs successfully, but when I tried to transfer a different/netlist diagram to the 2nd design in the project, he wants to throw the netlist 2nd in the first design exclusively. I tried several times without success.
I'm trying to do something against the rules here, or should it be transfer to the 2nd design? Thank you.
Thank you to attach files. Helped me to understand what is happening. Files in Multisim and Ultiboard design have an identifier that must be unique, and annotation uses this identifier to know which file to annotate to. The problem is that the two files Multisim created from the same original file, then the identifier is the same. However, in Ultiboard only the first design has the identifier, so annotation always selects the first drawing.
There are several ways you can work around this problem, but the following will work best:
- In Multisim, create a new file.
- Copy the contents of 2210_Gb to the new file.
- In the new file, click on transfer > Export access to card. Save the annotation file.
- Ultiboard, ensure that the 2210_Gb design is selected.
- Click on file > import > Netlist UB. Select the annotation file, then complete the import.
Both designs must now have different identifiers, and everything should work as expected.
In this case, the version 11.0 works in the same way, but annotation has been completely rewritten to 11.0, so, in general, the version is important when talking about problems of annotation. Version 11.0 also handles the case where the identifier is duplicated better, but in this particular case, it would have been unable to make a difference.
In a concern for the interest, I have the figure of Saint happening by watching the exported files (ewnet) annotation of Multisim. The important line that showed what was happening was (crossprobe {1A3B1023-68AC-4093-8329-885357CD0F2F}, which is the identifier and is the same for the two files of Multisim.
-
HTTP 503 error when you try to deploy the project in Visual Studio
I get a http 503 error when you try to deploy a project in Visual Studio-SQL Server 2005. What this mean and how can I solve this problem?
Hello
I suggest you refer to the following msdn link for the fix for the problem.
http://msdn.Microsoft.com/en-us/vstudio/aa718325
-
Cannot save the project with film about WMM 2.6
Hi im trying to save my movie in Windows Movie Maker 2.6, but it does not let me save all I need a way to record as soon as possible...
Please give me answers that will help me as soon as possible!How many photos? If it's a big project with many effects and
transitions, it may be too complex for your system resources.Are the photos all JPEG (.jpg)?
Convert pictures in Windows Bitmap (.bmp) image may be worth a try.
And... before trying to save... it may be worth trying to go to...
Tools / Options / compatibility... tab and uncheck the box 'all' filters / OK. -
Hello. I am trying to add an overall texture to the model of the whole project by adding a jpg with texture to the top of my diapers and affecting the overlay mode. However, when I try to exit out of the queue to render in format .mov, it hangs and will not be rendered. I use CS6 AE. 64 GB of RAM. Any help would be appreciated on how best to add an overall texture, if this isn't going to work. Thank you!
I'm not really sure what version of AE, you're running; I'll guess CS6. It is up-to-date, as in version 11.0.4?
I see that you do NOT multiprocessing, which is good.
And just as a workaround - just to get the project to the door - you could always rendering on the comp in a lossless codec, then just put the overlay on the imported file, recently visited a new comp.
-
Message when the project with external link display
Dear Sir.
I am very fimiliar with Robohelp 6 options. As I've updated from version 6 or 7, things were different. I have a huge project webhelp which consists of many subprojects, in most of them, there are hyperlinks to each other.
the problem is that whenever I open a project that references an external subject, a message appears saying: (the hyperlink... used in... is outside the flow of the project and do not appear in the project manager)This is a standard message and if you like the links are good, there is an option to disable the warning.
I suspect that you turned off in RH6 and installation for RH7 just brought.
-
Whenever I use the copy function, I have to go and change the setting for the project.
Windows 7 (64-bit)
Thanks for any help,
Linda
Hello
You are welcome. Actually, I took some pictures last night, have not retouched (make it smaller). I don't have them now.
Kind regards.
-
Save the project with function
Hello
I need to create an instance of my RoboHelp project. Is there a function as save as or save the project under.
Copy the Windows directory, open in RoboHelp and rename the project on the file menu.
You may also like to add this as a feature request. The more of us who do, more it will be included in a future release. You can do so here:
https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform & Product = 38
Maybe you are looking for
-
HP 15 Omen: backlight of the omen 15 hp
Hello I just got a hp omen 15-5110nr serial code [personal information deleted]. I'm under 10 64-bit windows. My problem has to do with the customization of the keyboard backlight. I tried to change the color using the control of harbinger of hp, but
-
Portege R700 - upgrade Windows 7 32-bit to 64-bit and memory question
I recently bought Portge R700 and am disappointed by the memory. I have a license of Windows 7 64-bit edition: what problems can arise if I update? Once installed, I can then use 8 MB of RAM. Moreover, I found the reagrding misleading Web site the op
-
HP g62: deactivation of the system 51183881
disabled system message: [51183881] please can someone help me... Thanks in advance.
-
Pavilion 17-e020us: upgrade of processor on HP Pavilion e020us 17 with Core i3 - 3110M
Hello I woud like to upgrade the processor in my HP Pavilion notebook e020us 17. It currently has an Intel Core i3 processor - 3110 m dual-core clocked at 2.40 GHz. I realize that upgrading the processor in my model means also I need a new motherbo
-
Error-200284. Test panel shows an activity. VI working doesn't work.
Hello everyone, I can't think of any other solution other than to reinstall all LabVIEW software at this point. I checked the cables connected to the DAQmx modules and they all seem to be fine. Not only that, when I look at the entries through 'Test