Deploy the shared target rt variable fails (crio-9073)

Similar Questions

• Causing problems of custom data type to deploy the shared target RT variable

  I seem to have some difficulty in using a shared variable published network created from a customized data type when it is deployed as an executable on a target of cRIO RT.  I'll start by describing why I think that this is the rub.  I created my RT VI in the LabVIEW (LV 2012) development environment and everything works fine.  This VI is quite simple, because these were quickly devolved into an exercise in debugging.  The RT VI begins by simply flashing the LED to a couple of times and then starts a loop simple acquisition to read some values out of the material using the analytical engine (while still flashing the LED of the user).  After reading the material, the values are grouped in a cluster and written in a shared variable published to the network defined by a custom control type def.  The custom control contains five floats double precision.  If it's important, the RT cRIO system hosts the shared variable in this case.

  So I have that deploy in the development environment, and everything works fine.  The LED flashes merrily along, telling me that the program runs correctly.  Running a VI host who reads the shared network has published variable gives the desired result.  Everything is good.

  Now, I want the cRIO system to run this simple program by itself at startup.  I build, set it as start VI, deploy it, and then restart the cRIO target.  The LED never flashing... the VI doesn't seem to work.  I'll spare you the major part of the work of debugging and access to the end.  I basically "diagram Disabled" various sections of the code up to the VI began to run correctly in an executable file.  I kept reducing the size of the disabled code until something has been disabled: the writing in the shared variable for the custom data type.

  So, I guess my question is this: are custom data types defined by type def would be personalized orders authorized executables to RT?  I read through the cRIO Developers Guide, my book of development in real time course of NOR and the white paper using shared Variables and I see nothing that forbids it.  I know that there are things not allowed in the executable files that are allowed in the development environment (property nodes façade, dialogue live, operating system specific calls, etc.), but no mention of the shared variable type custom data.  Any ideas as to why my VI is running in the development environment, but does not update unless I have delete the entry on the published network variable shared?

  Thank you in advance for your help!

  You must disconnect the data types of variables and then recompile. You can find it useful to keep on disk, a copy of the original lvlib.

  Don't know if this is a bug or not. It was suggested by someone in the forum that putting the ctl files in the right position (the disk? in the draft?) would allow the rtexe start; I did a quick check and it didn't work then I dropped the tests more far.

• Deploy the shared library in WebLogic by EPCO

  Hello
  
  I'm deploying in WebLogic 10.0 an EAR file as a shared library.
  
  I am able to deploy using the server administration Console, but if I deploy the EAR by EPCO, the EAR is always deployed as an Application.
  
  Is it possible to deploy with EPCO as shared library? I declare the EAR as a shared library in any file descriptor before?
  
  Thank you
  Carles.

  If you save your shared library of the EAR in the preferences under WebLogic-> shared libraries then refer to this library in an application, EPCO will deploy the shared library when the listing application is deployed.

  -Konstantin

• Unable to create a file with "nidll_vxworks" in Matlab for use with the LabVIEW SIT 2010 and a cRio 9073, error sh.exe

  I am trying to compile an OUTPUT for my Simulink model file by using "nidll_vxworks" and execute it using the Simulation Interface Toolkit for a cRIO 9073. I am able to compile the DLL file by using "nidll" and managed to run the simulation using my PC as a host.

  I have already downloaded the files "gccdist" and "vxworks61gccdist" and copied in "c:" when I build the model in Sumulink I get the following error at the end of the process (at the same time windows tells me that "sh.exe" has stopped working). If it's important, I'm on Windows 7 64-bit, but using Matlab 2009 b 32bits and LabView 2010 32-bit. ANY HELP WILL BE APPRECIATED. "QofV" is the name of my Simulink model and I changed to parts of "XXX" in the path of the file.

  6.1 CCG is only supported on Windows XP.  It is almost indicated in the readme_sit_vxworks.txt found in C:\SimulationInterfaceToolkit\xxxx\VxWorks (where xxxx is the version of the DIS).  It is said:

  * Known issues
  
  ---------------------------
  
  -WindRiver GNU Toolchain 6.3 and 6.1 do not work on Windows Vista.

  To be more explicit, it should be "Vista and later.

  Carl L

  National Instruments

• deploy the run-time engine

  Hello everyone,

  I'm trying to deploy my application of teststand to a target computer. My teststand application uses: TestStand 2014 (32 bit), LV 2014 SP1 (32-bit).

  Here's the problem I encounter while using the deployment tool.

  1. in the attempt to include RTE LV in my Installer, the deployment utility requires that I provided LV 2015 Installer. See the attached picture.

  I wonder why she asked median LV-2015-64 bit Installer. If I ignore the request, the build process failed.

  

  2. I use the shared variable to communicate with the compactRIO controller. The compactRIO controller is hosting EVS. My question is,

  a. I have to "deploy" my variable library shared, even though my system is not an EVS?

  b. I read in the manual that I can deploy the variable Fanny shared through the LV utility deployed the lilbrary step. So I added this step in the test sequence. Whenever I run the sequence, this step deploys the shared variables. On the target, I wonder if it is necessary to deploy the shared variable on each run of the test sequence. I think it should only be deployed only once on the system target. Am I wrong? If so, how to remove this utility LV deploy step of the library of the test on the target sequence, since there is no development testbed on the target system.

  3. I use a database to record test results after each execution of test sequences. I can export the schema of the table data and copy it to the target computer. My question is, how to import the schema of the database in the target table, since there is no system development teststand on it (no way to call configure it-> result-> database to import the schema of the treatment table)?

  I hope that teststand experts out there can give me some help tips to help me understand the whole deployment process. Thank you.

  Yours,

  lhuckj

  (1) make sure that LabVIEW 2015 Run time is NOT slected to install options-> drivers and components

  (2) I don't know

  3.

  Generally, I put my data link in a UDL file and include that in my distribution.  I set the Connection string to use a relative to this udl path and make sure that the UDL is copied to the same location on the targer

  I have also included in my repertoire of the Application of TestStand CFg:

  TestStandDatabaseSchemas.ini

  TestExec.ini

  Users.ini

  StationGlobals.ini (attention if you do not want to replace the existing one, I use it to store the addresses of the instrument)

• Impossible to deploy the model after upgrading to vCenter v4_1

  Hi all

  I updated vCenter Server from version 4.0 to v4.1 and re-registers the hosts.
  Virtual machines are working well and are able to collect data on performance.

  However, when I tried to deploy the model, error occurred and failed to deploy the model.

  (This model were made to vCenter v4.0 environment, before moving on to vCenter v4.1).

  My client needs deploy the model so that it can create a new server next week...

  I looked to the top of the Knowledge Base and found the following information.

  ----------------------------------------------------

  Knockout No. 1036224
  VMware KB after upgrading to vCenter Server 4_0 to 4_1, deployment of a model with a comments customization fails

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC & docType = kc & externalId = 1036224 & sliceId = 1 & docTypeID = DT_KB_1_1 & dialogID = 321118019 & StateID = 1 0 321114529

  ----------------------------------------------------

  If there is anyone who has solved this problem by following the procedures written in this KB, could you tell me at what level you updated VMware tools for?
  In addition, was the update of the virtual hardware to solve this problem?
  (I hope that the material of the VM is v7, which is the last for ESXv.4.0, update the virtual hardware is not required in my environment :)

  Thanks for you information in advance!

  
  < environment >
  Before the upgrade: vCenter Server * v4.0*, ESX v4.0.0, v7 (latest) of Virtual Machine hardware,.
  After upgrade: vCenter Server * v4.1*, ESX v4.0.0, v7 (latest) of Virtual Machine hardware
  (I've specifically updated only the vCenter server and ESX and VM(Windows/Linux) are not updated).

  Hello

  Try to convert the template to a virtual machine, then new - VM model.

  Sounds strange, but it works for us

• Deployment of shared Variables failed

  Hello

  I can't deploy a shared variable.

  I get the following error when executing my exe.

  Initializing...
  Calculating dependencies...
  The checking for conflicts. This may take some time...
  Prepare the items for download. This may take some time...
  My computer deployment
  Deployment deployment failed shared Variables.lvlib\\192.168.1.109\Shared Variables (error:-1967362042, operating system and Network Services: (Hex 0x8ABC7006) could not start service.).
  Completed with errors of deployment
  You want to run the application in any case or abandonment of execution?

  I tried to google the error code, but my search has been unsucsessful at the moment. Has anyone encountered this particular error? It would be useful if he said what service especially could not be started!

  Any help would be greatly appreciated!

  Thnaks for the research,

  Iain

  Welcome to the world of partially useful LabVIEW Error Messages (even if they usually Microsoft beat by a mile here).

  What version of LabVIEW you run?  It is the only version that has been installed on your PC?  [The reason for seeking it is me and others, have experienced the installation, say, LabVIEW 2015 on a system that has already LabVIEW 2014, something that is "legal" and should work, but during the Installation, OR HHT are stop and restart not.]  [A single Service, necessary for the operation of shared Variables, is the Variable Service NOR].

  In fact, while composing this Post, I went to my Services (because I wanted to be sure to specify the correct Service), to see that the Service is missing (again) and (again), the shared Variable engine isn't available.  Indeed, I get exactly the same error message.

  So here's how I'm going to (try to) fix.  I will go to the Panel, programs and features, National Instruments and will repair LabVIEW 2015 (32 bit).  I expect this process to take about 30 minutes (if I'm lucky) - I'll post my results here...

  Bob Schor

• new variable networked shared in my computer, but not in the shared variable engine list

  I have a Variables.lvlib shared on a cRIO target and test algorithms when I don't have access to material cRIO. Thought I could do a new project, add the library to the windows target (workstation). I need to add a few additional variables, I did in the original (i.e., while the library was the target in real time). Then create a new project and added the lvlib to the project (under my computer), and then wrote a VI to write in these SVs. When I let fall a constant Variable Refnum shared on the block diagram and browse for objects variables under 'Variable' Motors > ni.var.psp > localhost > shared Variables, list of variables shows everything except the 6 new variables. When I switch the view 'Current project', I get the same variables for new list WITH THE 6. However if I select the variables in the list and run the VI I get an error-1950679035 impossible to locate the variable in the shared Variable engine. Of course, I forgot something, anyone out there set me straight?

  Thanks for your time - lmd2

  Hello Lawrence,.

  Looks like you'll have to maybe just to deploy the new variables - refer to this document:

  LabVIEW Help: Making static Variables available on a network

  http://zone.NI.com/reference/en-XX/help/371361K-01/lvconcepts/sv_deploying/

  Hope that helps!

• Deploying the cRIO controller host VI

  When I include a Variable Shared Network-Published in my host VI, VI wants to deploy on my cRIO.  Without the shared Variable Network-Published, it runs on the host as planned.

  Yes, the Sub host VI post work and VI RT is under the lens of the LabVIEW project.

  How to use a shared variable in a VI to run on the host computer?  I need to pass data between my RT VI running on the cRIO and a host VI running on a Windows host.

  Hello Shall12,

  I misinterpreted your posts original - this option should be changed to the target on which variables are deployed.  Based on your screenshot, the library is contained on the RIO and should be changed it.  The behavior you're seeing is described in more detail here:

  4TIGNL8A knowledge base: disabling auto-deployment of Scan Engine of e/s Variables

  http://digital.NI.com/public.nsf/allkb/D9CF23FD2534E128862575430080CA17?OpenDocument

  3V0H36XL knowledge base: connection to a host PC VI in a startup on a real-time target Application

  http://digital.NI.com/public.nsf/allkb/A82CEF3FDC14DCA68625712500009649

• Support of the shared Variables in the third part XP embedded based of PTC?

  I sent a request in an embedded XP touch function (third party). The application works very well, but hosted on a RT (sbRIO Board) shared variables are not getting updated in the app on PTC

  1. the PTC is part of the project as a Windows XP Embedded Touch Panel

  2 NI TPC Service has been installed on the PTC and the application can be deployed remotely from the PC development via ethernet. (Where network connections and communications are OK)

  3. using distributed in the development computer systems manager, I can see that the shared variables are getting updates on the network

  I think that the problem can be solved if the following programs are installed on the TPC

  A. Support for variables that are shared for XPembedded

  B. shared Variable engine

  I tried to install the support of variables shared Program Files > National Instruments > Labview 8.6 > PDA > utilities > Variables > x 86 - but I get an installation error "cannot find the application for the Pocket PC applications Manager.

  Shared variable engine was installed from the ve220 folder. The program is installing. But the engine Variable is not start Control Panel > administrative tools > Services, Xpe, the service is stopped and cannot be started. When I try to start the service, I get the following error on PTC

  "Cannot start Service engine of National Instruments Variable on the local computer."

  Error 1053. Service has failed to demand launch or timely control.

  Please suggest solutions to the addresses above or another of the following:

  1. support of variables shared for XP built-in PTC

  2 Installer engine Variable shared.

  Thank you

  Krish

  Problem solved!

  Update for interested people working on XP Embedded PTC

  Just to ensure that shared Variables were indeed accessible to the TPC, I wanted to install Distributed Systems Manager 8.6 on the TPC. However given that the TPC was only 1 GB of DOM (disk on memory) and with all the software that I had tried, there remained only a few megabytes on the system. I had to add an another DOM of 2 GB.

  All products in the Installation went well, with the exception of the Logos NOR (Version 5.0). Logos OR installation has failed repeatedly.  I tried to install NI Logos separately, with the same results. Then I had this intuition that NI Logos had anything to do with the question.

  Then, I downloaded the new version of NI DSM 2009 SP1. Even if it were to settle on any fresh system without Labview, the installation would not proceed beyond the stage of configuration. I tried to install NI Logos of the folder on the download of new products separately and it worked magically!

  Once the new Logos (Ver 5.5) installed, the Shared Variable engine starts automatically and the shared Variables are finally unleashed - free stand up and shine! I thank Almighty God!

  On the lighter side, come to think of it - to run an application about 400 KB, we need NEITHER of Run Time, XP embedded, DSM, Logos...  (around 900 MB). Can make us everything simpler?  Invite your comments...

  Thank you

  Krish

• TPC-2012 cannot read the shared variable

  Hello

  I have a TPC-2012 and can not read variables shared with him. I welcomed the shared on a cRio-controller Variable. On another PC, the variable is read correctly, but not on the tpc-2012. What can I do? No error message is displayed on the TPC-2012 (Windows CE 5). The PTC can not write values in a shared Variable.

  Thank you

  Christian

  What LabVEIW Touch Panel version do you use? I don't know why static variables do not work correctly on your device. TPC-2012 comes with support preinstalled for shared variables, and it would be possible that it has been deleted or corrupted. Here are some steps you can follow:

  Install the Support of shared Variables
  How do we install the Support of Variables shared on the TPC-2012?

• Call to a shared library a VI on a target NI Linux RT (cRIO 9068)

  Hi, I wrote a very small shared library (.so) with Eclipse (toolchain 2014), which essentially serves as a wrapper for more complex, but I am having problems with the call go to in LabVIEW RT on a target Linux RT - specifically, the cRIO 9068. First: the library was copied in/usr/lib and ldconfig has been correctly implemented. More important yet, I have also written a C program (using Eclipse as well) that calls the single function currently implemented in the shared library: this works perfectly, both in Eclipse and you connecting directly on the cRIO with a Putty terminal. So I guess the shared library itself is ok and can be called from code/external programs. Now, dating back to LabVIEW (2014 here btw). Here's where things get difficult, I guess. Initially, I had the symptoms listed here--> http://forums.ni.com/t5/LabVIEW/How-to-create-a-c-shared-library-so-for-linux-real-time-for/td-p/302... who prevented me from actually run any code on the target of RT. Then I changed the call library function node: various tutorials suggest to put name_of_library.* in the path text box or the name of library, but unfortunately it doesn't seem to work, so I had to put the name and the extension too. But it still produces the error below ("the name of the function is not found" etc.) So I check the box 'specify path on diagram' and add/usr/lib as a parameter to the node library function call: now the VI can work and is actually transferred to the target of the RT... but the cluster of output error returns error 7, which is a kind of "File not found" error. However, I believe that this error message is misleading: indeed, if I try to debug remotely this library shared under Eclipse, I am actually able to pause it. and when I press the Pause button on the debugger, the goal of RT VI pauses, then continues as soon as I press the Resume button, I'm stuck... I tried searching forums and Google as well, but I have not yet found a solution. Any ideas on what's going on? Moreover, I can add more details if needed.

  Problem solved, it was a bad configuration of the node library function call which prevented the actual library (.so) to be called.

• What is the blue thing in the shared variable?

  I'm going thorough a code that has the huge set of shared variables and in some nodes, I find a blue color of brand/thing left bottom just worldwide as shown below.  What this indicates?

  

  Thank you

  Ajay

  I found the answers of my team member.  The blue mark indicates in fact a point and a slash ". ------"which means relative sharing Variable target."  If the shared Variable is absolute, this indication does not appear.  To learn more about the difference between shared variable absolute and Relative target, check it out here.  A Shared variable node can be established between absolute and relative assistance

  Menu popup (right click the node)-> reference mode.

  Thank you

  Ajay.

• Deploy shared in localhost Variable engine

  I need to talk to several RTs using the same computer. It seems
  easy to deploy shared variable engine (library) in localhost instead of
  RT. However, the problem is the shared variables (read) used in localhost screws
  are not updated to RTs. But when I use a different local VI to update
  the shared variable, it works fine. The variable path of the RT
  as "\\My Computer\Local NPSVlvlib\Test
  Data '. I think that this is the problem, why the values are not updated
  because the RT cannot resolve the path network ("\\My
  ("Computer\Local NPSVlvlib\Test Data"). Also, I tried to change the shared
  variable path in the CR, but I couldn't do it. Need help!

  I think I found the problem. Firewall was the culprit. I disabled the firewall and it started working like charm.

• Impossible to deploy the database of NOR-XNET to target RT PC

  Hello

  I am trying to deploy a XNET database to a target RT PC simply by following the tutorial here: http://digital.ni.com/public.nsf/allkb/9847EF6F2D867BC186257DCE00626236

  However, when I click on deploy nothing happens; I get no error message and the database alias does not appear as present in the aim of RT (the entire list is empty for the RT target). If I run my code, he complains about the database not being is not present, so I don't know that it isn't here.

  I checked with Max OR and target a NI-XNET 1.6.0 installed. I'm using LabVIEW 2015. I have no problem connecting to the target. I tried an another new database created with LabVIEW 2015, without going. I tried to disable the Windows Firewall as suggested in a similar position (http://forums.ni.com/t5/Automotive-and-Embedded-Networks/Unable-to-deploy-NI-XNET-Database-to-RT-Tar...), but that no longer works.

  Help!

  Thank you

  Hello

  It seems that I have the latest version of XNET on my target and the crowd at the beginning, but just to try something I did the following:

  • I have reinstalled XNET on the target using NOR-MAX. I had to uninstall dependency package "nor-xnet for NI-CAN compatibility library", before doing this.
  • I have uninstalled and installed the last XNET on target as well.

  After that, things worked!

  Thank you