Deployment error

Hello

My application was working fine in the Simulator and now I get a deployment error in Flash Builder. I tried to restart the Simulator, but the error persists. Any idea?

Here's the error dialog box:

Thank you.

Hey jashsayani,.

based on the theory of PBDev you have too many files are packaged and deployed, try to reduce the number of files in your project (temporarily) to see if it clears up the problem. Try also to deploy another application (new project) and see if that installs and runs correctly. Good luck!

Tags: BlackBerry Developers

Similar Questions

  • CompactRIO Deploy Error "LabVIEW: resource not found.»

    Hello

    I use a 9002 CompactRIO and LabVIEW 8.5.  I made a simple FPGA VI to read a bunch of analog inputs and write a square wave to a few analog outputs.  Then, I made an another VI to run on the target in real time in order to convert the frequency scaling and updated entries nationwide cycle duty cycle values and frequency real accountability.  When I try to deploy the VI in real time, I get the following:

    Deployment r03fsae (the goal settings successfully deployed)
    Deployment of special audit Tags.vi (5.89 K)
    Deployment GetRTHostConnectedProp.vi (3,41 K)
    Deployment of search and replace Pattern.vi (8,11 K)
    Deployment nirviFillInErrorInfo.vi (8.09 K)
    Deployment niLvFpgaErrorClusterFromErrorCode.vi (11.27 K)
    Deployment nirviErrorClusterFromErrorCode.vi (5.93 K)
    Deployment error Code Database.vi (3.67 K)
    Deployment to find Tag.vi (10.43 K)
    Deployment of fusion Errors.vi (6.75 K)
    Deployment Whitespace.vi topping (3.71 K)
    Deployment nirio_MultilineStringToArray.vi (8,81 K)
    Deployment nirio_AppVersionToI32.vi (3.96 K)
    Error error Code.vi (23.42 K) Cluster deployment
    Deployment _nirio_device_attrSetString.vi (9.46 K)
    Deployment _nirio_device_close.vi (9.90 K)
    Deployment nirio_Read32.vi (13,07 K)
    Deployment _nirio_device_open.vi (11.59 K)
    Deployment nirio_Write32.vi (13,01 K)
    Deployment _nirio_device_writeBlock8.vi (9.83 K)
    Deployment nirio_Write8.vi (13,01 K)
    Deployment _nirio_device_configSet.vi (11.42 K)
    Deployment nirio_DMAReconfigureDriver.vi (16.63 K)
    Deployment _nirio_device_writeBlock32.vi (9.36 K)
    Deployment nirio_Read8.vi (13.04 K)
    Deployment nirio_DMAStopAll.vi (11,39 K)
    Deployment _nirio_device_attrGetString.vi (13.06 K)
    NirviReportUnexpectedCaseInternalError (String) (5.58 K) .vi deployment
    Deployment of .vi nirviReportUnexpectedCaseInternalError (U32) (4.72 (K)
    Deployment _nirio_device_readBlock32.vi (14.41 K)
    Deployment _nirio_device_attrGet32.vi (13.85 K)
    Deployment nirio_IsItOKToDownload.vi (7.07 K)
    Deployment nirio_MiteNTDeviceFamily.vi (5.30 K)
    Deployment of Format Message String.vi (7.35 K)
    Deployment CORE.vi General Error Handler (51,02 K)
    General Error Handler.vi (13.19 K) deployment
    Simple deployment Error Handler.vi (10.01 K)
    Deployment nirio_CheckDriverVersion.vi (10,58 K)
    Deployment _nirio_device_attrSet32.vi (13,62 K)
    Deployment nirio_Download.vi (29,31 K)
    Deployment nirio_ConfigureRegisterAddresses.vi (7.11 K)
    Deployment nirio_CleanUpAfterDownload.vi (6.22 K)
    Deployment nirio_PrepareForDownload.vi (6.44 K)
    Deployment nirio_EnableInterrupts.vi (13.76 K)
    Deployment nirviRIOSetUpMiniMite.vi (31.23 K)
    Deployment nirio_Open.vi (14.93 K)
    Deployment nirio_Close.vi (10.95 K)
    Deployment nirio_DisableInterrupts.vi (11,10 K)
    Deployment of nirviIntfOpen_cRIO - 9102.vi (85,54 K)
    Deployment of nirviIntfClose_cRIO - 9102.vi (12.24 K)
    Deployment of scale freq and duty.vi (4.46 K)
    Deployment XDNodeRunTimeDep.lvlib
    Deployment XDNodeRunTimeDep.lvlib:loadlvalarms.vi (5.47 K)
    Math.vi sensor deployment
    Could not download the math.vi sensor
    LabVIEW: Resource not found.
    LabVIEW: Resource not found.
    LabVIEW: Resource not found.
    LabVIEW: Resource not found.

    Download completed with errors.

    This error message is not particularly useful, someone knows what could be my problem?  Or how I can fix it yet?  Is there a detailed journal where I can look for more information about the error?

    Thanks in advance for any help!

    Hi David,

    You may be walking on ground dangerous with your fpga code, old and new.  You use the modules in what is known as 'calibrated' calibration mode that is of fixed point math.  Your generation of square wave fpga using whole math, which is normally used when the modules operate in mode calibration "gross". To change the calibration mode, you will need to right click on the module, then select it desired mode to use.  I'm not saying that you do.

    What you need TO do to ensure the proper functioning of your fpga VI is to make sure that you use U32 son of math required and then convert the U32 an FXP using the correct encoding (if it is signed, word length and integer).  In your case the 9263 requires signed word in length, 20-bit, 5-bit all over.  Insert an FXP conversion between the generation of square wave and either create a constant FXP of the appropriate type (or use a control correctly put in place of one of the other 9263 channels [AO0 AO1]) and connect to the node of type of fixed point on the conversion OR define the conversion of fixed point with a right click on the exit node and the appropriate settings in the popup box.

    As for your new code fpga, I don't know why you used a sequence structure that your reading of 18 channels on the 9205 will have 144 microseconds, and each write two channels on the 9263 will take 5 microseconds.  I've not worked on how long will take the square wave generation.

    I do not understand your last question.

    > "I've attached a screenshot of my pwm_out.vi if I remove control of read/write of background, or if I don't use of all none of the analog inputs, it works fine.

    > But as soon as I add the analog inputs it fails... ».

    Did you create a new stream of your fpga_new.vi and referenced in your pwm_out_new.vi on the RT?

    It is difficult to guess what you are showing in the screenshots.  If the project is not too big then maybe you could post here.

    As mentioned above, by JMoto, software versions help.  Check in MAX you have on your PC and also on the cRIO 9002 to make sure that there is no incompatibility.

    See you soon

    Stephen

  • Deployment error when I deploy my application world Hello to device of BB curve 8900

    I am facing deployment error while I deply to device Iam using the version of the sdk webworks: BlackBerry WebWorks SDK 2.3.1.5

    IAM using the webworks said above, windows 8 64-bit system, when I deploy it in the Simulator for other versions I see global demand for Hello in the emulator to ripple, but when I try to look for 8900 device that is not listed in the webworks platform why is it so?

    My camera works with OS 4.6.1, then how to deploy my application world Hello to this device of curve 8900?
    If the JDE or jre must be downgraded on 4.6.1 how? I need to change my environment variable

    Someone in a pile on flow said like that. "

    You as a developer WebWorks don't treat BrowserField instance, but your app to launch and work, needs this new implementation of the BrowserField class that supports the required functionality.

    Software more former device does not support the feature that provides new BrowserField. And as a result, it is not possible to launch WebWorks applications on older devices OS-es to 5.0.
    "So do I need higher version OS to run my application helloworld on my device.

    SDK BlackBerry WebWorks 2.3.1.5 has a requirement of BlackBerry OS 5.0 because of the new BrowserField object (which has been introduced in BBOS 5.0 that you noted.) You will not be able to deploy a WebWorks to any device that runs a pre - 5.0 operating system.

  • File. WAR deployment error: weblogic. failed to preload at startup in a Web application:

    Hello

    I'm dealing with deployment error while installing the file. War on weblogic server. When I run my application of webservices plsql in integrated weblogic server, it works fine... When I tried to package it and deploy on weblogic, it gives following error, pls could anyone help on this topic.

    Pls. note I've created connections to database through the wizard for the creation of webservices plsql, data source name is created under weblogic domain-> services-> jdbc-> data source in the application server. Even then, I'm not able to succeed with the deployment. Appreciate your help, thank you.

    I used jdeveloper 11.1.1 g for the construction of pl/sql based Web application services.

    Message icon - Error An error occurred during activation of the changes, please see the log for more details.

    Message icon - Error [HTTP:101216] Servlet: 'FinanceCreateInvoicePort' failed by preloading at startup in a Web application: "PLSQLWebServices-Project1-context - root.war. java.sql.SQLException: error looking up < java: comp/env/jdbc/CreateInvDBconnDS >: to createinvdbconn. FinanceCreateInvoiceBase. < init > (FinanceCreateInvoiceBase.java:33) to createinvdbconn. FinanceCreateInvoiceUser. < init > (FinanceCreateInvoiceUser.java:11) at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) at java.lang.reflect.Constructor.newInstance(Constructor.java:513) at java.lang.Class.newInstance0(Class.java:355) at java.lang.Class.newInstance(Class.java:308) at weblogic.wsee.component.pojo.JavaClassComponent.createTarget(JavaClassComponent.java:49) at weblogic.wsee.component.pojo.JavaClassComponent. < init > (JavaClassComponent.java:40) at weblogic.wsee.ws.WsBuilder.setComponent(WsBuilder.java:1907) at weblogic.wsee.ws.WsBuilder.buildService(WsBuilder.java:215) at weblogic.wsee.ws.WsFactory.createServerService(WsFactory.java:54) at weblogic.wsee.deploy.ServletDeployInfo.createWsService(ServletDeployInfo.java:91) at weblogic.wsee.deploy.DeployInfo.createWsPort(DeployInfo.java:368) at weblogic.wsee.server.servlet.BaseWSServlet.init(BaseWSServlet.java:83) at javax.servlet.GenericServlet.init(GenericServlet.java:241) at weblogic.servlet.internal.StubSecurityHelper$ ServletInitAction.run (StubSecurityHelper.java:283) to



    Thank you

    Devendra




    Define the JNDI name as jdbc /CreateInvDBconnDS instead of CreateInvDBconn

    What makes research JNDI as java: comp/env/jdbc/CreateInvDBconnDS with java: comp/env/added by default.

    ADF expects this JNDI name to start with jdbc / and end with the DS.

  • Deployment error archive .jar &lt; proj &gt; partition 'default' on the server

    Hello

    When I am trying to deploy a BPEL process to soa 11.1.1.3 Server I get the following error

    Problem in sending HTTP request on the server. Check the standard HTTP response code for 407
    + Deployment error archives sca_HT_Wi_rev1.0.jar to partition 'default' server soa_server1 [localhost:8001] +.
    HTTP error code returned [407]
    No error message is returned by the server.
    + Deployment error archives sca_HT_Wi_rev1.0.jar to partition 'default' server soa_server1 [localhost:8001] +.
    + # Incomplete deployment. ####+
    Deployment error archive file:/C:/JDeveloper/mywork/TestHT/HT_Wi/deploy/sca_HT_Wi_rev1.0.jar
    + (oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer) +.


    my server is listening to port 7001...

    Please help me solve this problem

    Kind regards
    Sundar

    Code of State HTTP 407: Proxy authentication required.

    Make sure that you disable the proxy settings in JDEV if not deployment on a remote server via the proxy.

  • internal weblogig weird deployment error of Dev D 11 g

    Our unexpected application start getting local Weblogic deployment error.

    Our applicaton have 4 project inside. Two of them concern the porpose library
    But one of them (Evrak-Dfc-webapp) is converted to a web application.
    And it couse deployment error.

    We added the error log (I line "BOLD" of the thing is couse of the problem) at the and of this thread.

    How can we solve this problem?
    Why a lib project turn into a web application?
    How can we change this project in real format?

    Analysis of the dependence running...
    2009-04-15 13:47:21.075: WAR file written to C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\Evrak\evrak
    2009-04-15 13:47:21.184: file of WAR wrote to C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\Evrak\evrak
    2009-04-15 13:47:21.325: WAR file written to C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\Evrak\Evrak-Model-webapp
    2009-04-15 13:47:21.403: file of WAR wrote to C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\Evrak\Evrak-Model-webapp
    * 2009-04-15 13:47:21.496: WAR file written to C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\Evrak\Evrak-Dfc-webapp*
    * 2009-04-15 13:47:22.322: file of WAR wrote to C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\Evrak\Evrak-Dfc-webapp*
    2009-04-15 13:47:24.519: file EAR wrote to C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\Evrak
    2009-04-15 13:47:24.535: file EAR wrote to C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\Evrak


    Application deployment...
    < 15 April 2009 13:47:25 IS > < WARNING > < J2EE > < BEA-160195 > < application version of the lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored, because the application Evrak is not versioned. >
    April 15, 2009 13:47:25 oracle.adf.share.config.ADFConfigFactory cleanUpApplicationState
    INFO: Cleaning of application state
    April 15, 2009 13:47:26 oracle.as.jmx.framework.PortableMBeanFactory setJMXFrameworkProviderClass
    INFO: JMX Portable framework initialized with platform SPI 'oracle.as.jmx.framework.wls.spi.JMXFrameworkProviderImpl class '.
    < 15 April 2009 13:47:33 IS > < error > < HTTP > < BEA-101371 > < there was a failure during the processing of annotations for application C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\Evrak\Evrak-Dfc-webapp. Please make sure that annotations are valid. The error is org.apache.myfaces.trinidad.webapp.ResourceServlet >
    April 15, 2009 13:47:33 oracle.adf.share.config.ADFConfigFactory cleanUpApplicationState
    INFO: Cleaning of application state
    < 15 April 2009 13:47:33 IS > < error > < hats > < BEA-149265 > < error has occurred in the execution of the request for deployment with the ID ' 1239792445563 'for task ' 0'. Error is: "weblogic.application.ModuleException: could not load the webapp: ' Evrak-Dfc-context-root" "

    weblogic.application.ModuleException: cannot load the webapp: "Evrak-Dfc-context-root".
    at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:387)
    at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
    at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
    to weblogic.application.internal.flow.DeploymentCallbackFlow$ 1.next(DeploymentCallbackFlow.java:387)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
    Truncated. check the log file full stacktrace
    java.lang.ClassNotFoundException: org.apache.myfaces.trinidad.webapp.ResourceServlet
    at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
    at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
    at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:54)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
    Truncated. check the log file full stacktrace
    >
    < 15 April 2009 13:47:33 IS > < WARNING > < hats > < BEA-149004 > < failures have been detected all introducing deploy application task "Evrak" >.
    < 15 April 2009 13:47:33 IS > < WARNING > < hats > < BEA-149078 > < message 149004 track battery
    weblogic.application.ModuleException: cannot load the webapp: "Evrak-Dfc-context-root".
    at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:387)
    at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
    at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
    to weblogic.application.internal.flow.DeploymentCallbackFlow$ 1.next(DeploymentCallbackFlow.java:387)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
    Truncated. check the log file full stacktrace
    java.lang.ClassNotFoundException: org.apache.myfaces.trinidad.webapp.ResourceServlet
    at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
    at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
    at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:54)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
    Truncated. check the log file full stacktrace
    >
    [Deployer: 149034] An exception has occurred for task [Deployer: 149026] deploy Evrak on DefaultServer. : could not load the webapp: "Evrak-Dfc-context-root".
    weblogic.application.ModuleException: cannot load the webapp: "Evrak-Dfc-context-root".
    # Incomplete deployment. # Apr 15, 2009 13:47:33
    oracle.jdeveloper.deploy.DeployException
    at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:247)
    at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.deployImpl(Jsr88RemoteDeployer.java:157)
    at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
    at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
    at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
    at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
    at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
    at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
    at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
    at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:436)
    at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:209)
    at oracle.jdevimpl.runner.adrs.AdrsStarter$ $5 1.run(AdrsStarter.java:1365)
    Caused by: oracle.jdeveloper.deploy.DeployException
    at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:413)
    at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:238)
    ... 11 more
    Caused by: oracle.jdeveloper.deploy.DeployException: deployment failed
    at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:395)
    ... 12 more
    # Cannot run Evrak application because of the deployment error to DefaultServer.
    [Application Evrak stopped and cancelled Server Instance DefaultServer]

    Hello

    Libraries check on your project, jdev sometimes adds the projects of runtime libraries of Trinidad (or other libraries in the view layer) and creates a public_html folder in your project.
    So, check the library and delete the public_html, if it is created.

    Pedja

  • DBG1012: Debug deployment errors, can't run debug code

    DBG1012: Debug deployment errors, can't run debug code

    I got this error when im trying to load the data from different database...

    I myself DWH database with the option "target warehouse"... n HR database with the option "data source"...

    I tried to load HR table to table DWH... n im already ensure that both databases have this table...

    n This is my debug data:

    Analysis of card to debug...
    Retrieving the connection of Control Center information...
    Connecting to the Control Center schematic...
    The character set of the Control Center schema checking...
    Configuration of the sources and targets...
    Card validation...
    Correlated Commit is DISABLED.
    Generate debug package...
    Deployment of debug temp tables...
    Deploying debug package...
    ***********************************************
    Messages of debug code deployment:
    LINE 16, COLUMN 10:
    PL/SQL: ORA-00942: table or view does not exist
    LINE 11, COLUMN 3:
    PL/SQL: SQL statement ignored
    End of messages of debug code deployment
    ***********************************************
    Mapping debugger error:
    oracle.wh.service.sdk.mapping.debugger.WBMappingDebuggerException: DBG1012: Debug deployment errors, can't run debug code.

    What should I do?

    THX 4 your attention...

    LINE 16, COLUMN 10:
    PL/SQL: ORA-00942: table or view does not exist

    Take the generated deployment script.
    and focus on line 16.

    Make sure table name e\whether that it hit in the database.
    If read access is provided if it is in the different database.
    Check the line number of the package body.

  • deployment error: unable to locate all the subVIs screws saved because a Subvi is missing or the VI is not registered in the last version of LabVIEW.

    Hello world

    I want to deploy my project Teststand and got a strange error when creating the image.

    For many additional files with the suffix as .tso, alias, lvlpb, exe, dll... deployment tool launches the error message "unable to locate all the subVIs screws saved because a Subvi is missing or the VI is not registered in the last version of LabVIEW.» (see also the attached picture).

    If I exclude the files of my distribution or set them to "include without treatment or dependencies of elements of" the generation works fine.

    After the error, I checked the Temp folder. The temporary project LV is not yet created.

    I used the deplyoment-installation in the same way within a fromer project and had no problems like that...

    I use Win7 / LV2013 SP1 & Teststand 2013 f1 (5.1.240).

    Could someone help or support? Thank you!

    Finally, I tried the construction with LV2015 & TS2014 - no problems... Everything works fine...

  • FP6.0.5 deploy error

    Hi, guys, I have a new problem here.

    I reinstall labview2009 and max4.6. This solves all the issue of compatibility. But when I create and deploy my webservice, it fails. He said:

    Initializing...
    Calculating dependencies...
    The checking for conflicts. This may take some time...
    Prepare the items for download. This may take some time...
    Deployment DODSpare.lvproj LV9
    Deployment @0 (successfully deployed settings) cFP-2220
    Deployment Target (target settings deployed successfully) FP
    Deploy my Web Service
    Web Services deployment failed
    Completed with errors of deployment

    I rechecked the tool-> optiion-> web service, it is activated. But I can't just deploy.

    Does anyone know how can I fix?

    In addition, the host computer and the device fieldpoint uses the 6.0.5driver.

    Hi baal.

    This knowledge article database is probably a good starting point.  It also includes a section on deployment to a real-time target.

  • TestStand-19000 deployment error

    Hello

    I am trying to build my app TestStand deployment but I get an error:

    -19000-the library created in the source distribution is not valid. Contact National Instruments support. The file created is:

    It does NOT specify the file after the ': '.

    I've tried several fixes by browsing the log generated by the deployment engine, but now he gives me all the relevant information.

    If you want to check, the log is attached (this is an .xml file).

    Any help is really appreciated.

    Thank you!


  • TestStand deployment error - error: unable to locate all the screws saved subVIs because it lacks a Subvi

    Hello

    I am a systems and software engineer based in Vancouver. I developed a test system automated using 2013 LabVIEW and TestStand 2013 with custom operator interface.
    I encountered problem 'lack screw' which is kind of weird because I went to analyze the sequence for the TestStand Deployment Utility and TestStand sequence editor > files broadcast tab.
    But when I tried to build the installer and reach the point ' called distribution screw, it always throws an error saying "an error occurred trying to read the error of the screw, possible because the screws are not saved in the latest version of LabVIEW. Do you want to save any changes now? ". I tried both (that is to say Yes and no) for this option, but it has not solved the problem.

    This is part of the original error message displayed in the TestStand deployment utility:
    " ***************************
    Then the treatment live...
    Error: Cannot locate all the subVIs screws saved because a Subvi is missing or the VI is not registered in the last version of LabVIEW.
    The chain of calls to missing screws:
    1 - ATE_AccelerometerTest.vi
    2 - CreateAndMergeErrors.vi (missing)
    3 - LogControl_CheckForErrorSendUpdates.vi (missing)"

    All screw missing come from userlib.

    Actions performed:
    -File of sequence analyzed by using the TestStand Deployment Utility and TestStand sequence editor
    -Checked "search directories" include all the necessary files/dependencies.
    -Mass to compile the directory of the missing screws
    -Added all the necessary files and folders in the workspace file.

    The result is always the same function according to the actions performed.

    Debugging last I did earlier, is that I tried to find the sequence and steps missing screws as shown above (for example ATE_AccelerometerTest.vi)
    and I discovered that the measure appears to be an empty action step. This would be possible even if it has already passed the analysis?

    Other considerations include:

    I'm using sp1 2013 LabVIEW and TestStand 2013. We tried the building three 3 computers and we only managed once to a freshly installed comptuer.

    Hoping to hear from you soon.

    Kind regards

    Michael Panganiban
    Engineering systems and software
    www.Synovus.ca
    [email protected]

    Hi all

    We were able to solve the problem. First of all to note is that the release notes in 2013 TestStand is obsolete and we confirmed engineer OR Austin TestStand 2013 works very well with LabVIEW 2013 SP1.

    Second, we played option deployment TestStand that solved the problem. Attached are the pictures.

    We have activated just the 'delete unused Components VI'. It could be one of the libraries (lvlib) we have included in the compilation, but we've not thought of it again because we have checked that all the screws are working. It could also be something else that I think is very hard to find from information. However, if someone had the same problem, this could be useful.

    Again, we return to using 2013 TestStand and LabVIEW 2013 SP1.

    I appreciate all comments and feedbacks. Otherwise, you can close this request for assistance.

    Thank you.

    Kind regards

    Michael Panganiban

    Engineering systems and software

  • Shared variable library deployment error

    Hello

    I'm having a problem with my variable shared library in the .exe deployment.  I installed my two individual computers to request one.  We my library is as it should be and on the other, I get an error message, as shown below:

    Here's the code the error occurs in:

    I checked the path and name, and they are the same on both computers, i.e.:

    The two computers are new and have had just my app installed installation I built and as I said at the beginning one of the systems very well so all that is needed is to be installed.

    Both computers are Windows 7 64 bit. My application has been developed using LEVELS and Distributed System Manager 2010 is installed on the computers.   However we have installed windows Dell and the other made by my IT department using our brand Image (which is the one that does not).

    The only thing I've tried is to disable the firewall and adds indicators on the front panel to show me what was entered for a path and a name.

    I've also attached the my library file.

    I read a few on the other posts, but there seems not to be a consensus for the resolution of the problem and they have been since 2008.  I hope someone can give me a solution to this problem.

    Terry

    It is a follow-up to the solution of my problem.  I discovered there was a problem with the installation with this computer.  In collaboration with an Application Engineer of NOR, I was asked to perform a forced relocation of my request and this has solved the problem.  Here is the link on how to do it.

    http://digital.NI.com/public.nsf/allkb/ADD22E807D5A12AD862579EC00760F79?OpenDocument

    Terry.

  • TestStand deployment error Code 1055 when using LabVIEW storage VIs

    After a few days of playing with TestStand deployment. I have final stalked the VI which was the origin of this error.

    He was using the LabVIEW storage screw to save data in a TDM file.

    My work around at the moment is to use a Wrapper VI and call this VI by reference.

    In this way the deployment TestStand cannot detect the Sie of storage.

    I'm using LabVIEW 8.6.1 and TestStand 4.1.1 does anyone know if this issue was address TestStand 4.2?

    It seems that the upgrade can be worth it.

    Simon,

    After investigating the matter further, I found that we had already encountered this bug. It has been fixed in 4.2 TestStand and LabVIEW 2009 I tested your files with 4.2 TestStand, LabVIEW 2009 and everything built successfully without any hiccups on the way.

  • In the version of deployment error codes

    Hello

    I would use error defined codes that I have on my machine of developmet of working on the deployment machine unter RTE. What should I do?

    Simply copy your files for "% Program Files%\National Instruments\LabVIEW x.x\resource\errors\" error "% Program Files%\National Instruments\Shared\LabVIEW Run-Time\x.x\errors\"

    Andrey.

  • Library deployment error

    Hello

    I want to use shared variables (network or a single process, does not matter), to communicate on the same PC two exe.

    Everything works fine with the development environment. Things are not so good, if you use exe.

    I found this useful link on the site OR (in french)

    http://digital.NI.com/public.nsf/allkb/67D0ED29F6FE8E6D86257538003436B2

    but when I use the method of library to deploy in the exe, I get an error 8 (you do not have the required permissions)

    Thanks for your help!

    Phil

    IT a problem with the Vista firewall...

Maybe you are looking for

  • Insert the formula pop up menu

    Hello I have a pop up menu with five different choices in it. I also have a date next to each choice, basically I want to insert a formula into the pop-up menu to tell if it is beyond the date in cell A1 then change the pop-up menus to choose from on

  • Kanji animation does not

    The site is http://www.csse.monash.edu.au/~jwb/cgi-bin/wwwjdic.cgi?(They also have alternative URLS but the animation doesn't always work.) An example would be http://www.csse.monash.edu.au/~jwb/cgi-bin/wwwjdic.cgi?163568_%C5%EC I use Windows 7 Pro.

  • Re: Message Toshiba\CEC_MAIN.exe missing after starting

    At startup the following message appears: program Camera Assistant Software for lack of Toshiba\CEC_MAIN.exe. Re-install. If all systems are functioning normally. How can I reinstall this software. I have the recovery disk made the purchase of the ma

  • Pavilion X 360 13.3: Pavilion x 360 close the question since to win 10 update

    Hi, little help needed please, update my laptop for windows 10 it just doesn't turn off, I have tried all the power options usual etc, but if I'm on it more than half an hour and goes off, the screen turns off but nothing else, button / always lights

  • Hotmail messages en

    Saludos Tengo a problema con los correos electronicos what generan desde NI Forums, sellaman "buscar en the comunidad OR discussion forums policy" y estan saturando the tray of entrada mi correo personal, quisera that alguien me diga if exist una man