Descjet HP 2050 all-in-one: I lost the disc to connect my printer to my computer

Similar Questions

• Do I have to pay to download the driver for my printer Dell 966 all in one I lost the driver CD?

  Original title: Dell Printer 966 all in one

  Do I have to pay to download the driver for my printer Dell 966 all in one I lost the driver CD?

  Sam Soliman
  E-mail address is removed from the privacy *.

  You shouldn't if you get it from Dell.

• DeskJet 2050 All - in - One J510a: outside the printable area

  Hi all

  I use-

  W.7, Ultimate, 64-bit.

  Name of the model: Deskjet 2050 All - in - One J510a
  Firmware version:... SLM2FN1006BR
  Serial number:... CN0BD3F28805D1
  Service ID:... 21074
  IK No.:... 670
  Software version:... 028.000.1313.000
  The printer driver version:... 09.84.00.1189

  When you use Word, in Office 2010, I have margins set to 'Normal ' -.

  Top: 0.98 "low: 0"

  Left: 0.12 "right: 1.18"

  Whenever I have insert a border around my text and that you try to print, I was informed that section 1 page borders are defined"beyond the printable area of the page. Do you want to continue? »

  By clicking on 'Help' I read and follow all the different "solutions" available. None allow the page to print.

  I selected all of the selections of available margin different and even selected some of my own under the "custom margins. The page to print with border permits.

  For example, one that I tried was-

  Top: 0.06 "low: 0.57"

  Left: 0.12 "right: 0.13"

  I then clicked on 'Options' under 'Page borders.'

  to the "measure of" I chose "Text" once more, I was unable to print the page with the border!

  I find this very frustrating, and I can't find a solution.

  I would be very grateful if there is a known workaround that will allow me to print a Word document with a border selected.

  (I have no technical experience, and if there is a soluition, I'd be happy to get detailed instructions!)

  Thank you

  ColinX

  Hello

  Your printer can print without margins (IE margin = 0 ").  This printer can print only to a certain margin.

  bottom margin is 0.57 ",
  top margin is 0.06 "
  and the left and right margins are 0.125 ".
  
  So if you try to print beyond this margin, the impression will be cut or outside the printable area.
  
  Kind regards.

• DeskJet 3050 All - in - One J610a: changing the regional settings for a printer

  I have the printer which is purchased in the United States and used in India. He had 61 HP cartridges. Once the cartridge is finished, I click on buy online help from hp. He showed me 802 series I ordered online buy.

  See pages of different media, I called for regionalization reset HP call center, however they need original cartridges in working order, which is not possible now. I have infact thrown 'old'. Purchase 61 series in India will cost more than a new cost of the printer.

  Can you please let me know how this printer works with 802series?

  Hello

  As long as you have a fulll set new 802 ink cartridges you should be fine, the old cartridges are not required for such a...

  Contact the HP technical support once more as suggested, as a reference to show support representing the included object in my previous post.

  Kind regards

  Shlomi

• DeskJet 2050 all-in-One - J510: how to print without borders?

  I try to print my project on paper to A4 borderless, but it seems that no matter how to change settings, the results still had a border. Can someone give me some advice on how I could solve this problem?
  
  I print on Word, and my printer is HP Deskjet 2050 all-in-One - J510a.

  Hello.

  The deskjet 2050 printer does not support printing without margins, as you will find by notebook loads below:

  Without borders: No.

  http://h20195.www2.HP.com/v2/GetPDF.aspx/4AA1-1465EEE.PDF

  This material allows to print only to a certain margin.

  The lower border is 0.57 ", the top border is 0.06 'and the left and right borders are 0.125. any impression beyond these margins is cut off due to the limitations of harware.

• DeskJet 2050 all in one J510: installation HP deskjet 2050 all-in-one with windodws portable

  Hello

  Top of greaded for the new laptop that has windows 10 and can not get my printer to be seen.  When the printer is connected through the USB port, computer laptop just scan, load an application for wireless use won't see or interact with the printer as the device is not a wireless model, (only 5 years).  printer still works great on Windows 7 laptop, but the laptop keeps freezing as is the reasosn for the upgrade.

  Question is how to make the new laptop to use my printer?

  I still have the domain controller that came with it, but it will not work installation on the laptop W10.

  Help, please.

  Thank you

  Denise

  @ladyzq

  Welcome to the HP Community Forum - we are a community of fans of HP !

  If you did not, please install the software of full functionality for the printer.

  and / or

  • Start here: HP Print and Scan - Doctor help solve printer problems

  Printer, one of

  "Deskjet 2050 all in one J510 ' (5)

  Full software functionality (the printer program):

  Name of the file:

  DJ2050_J510_1313 - 1.exe

  (49.0 MB)

  Help, suggestions and examples:

  Install the full features software - printer

  Operating system recently migrated to Windows 10 and re - install the printer software:

   

  1. If you use a USB cable to connect the printer and the computer, disconnect the cable
  2. Create a Restore Point >
  3. Reinstall / update your PDF reader (Adobe Reader DC / Foxit)
  4. This works best if the updates of Windows (10) computer are up-to-date - check if you are unsure
  5. Update your drivers HP (or another computer of the seller) - printing software like updated drivers
  6. Open printer pilot site support Page >
  7. Download a new copy of the Full Feature software >
  8. Remove the printer from programs and features existing software / applications and features / all Apps / devices and printers >
  9. Shut down the computer > start and connect >
  10. Install the full feature software (find in your downloads folder > double-click the file) >
  11. Restart the computer and log in to complete the installation

  Article (s) of interest include:

  • Start here: HP Print and Scan - Doctor help solve printer problems
  • Preparation
  • Extras, tips and some Cool stuff > HP, Installation Help and Diagnostics information
  • Create a Restore Point
  • Remove the printing software (two parts)
  • Download and Installation
  • Integrated webserver (EWS)
  • 10 Windows updates (check)
  • Restart all
  • Analysis of the Options of program *

  ** Cool independent scan programs (thanks to greenturtle for links to HP extended Scan!)

  Reference:

  Options of the digitization program

  Sections of the document include:

  HP Extended Scan - Single, multiple scans, automatic framing!

  NAPS2 - not another scan PDF

  And others...

  When you see a post that helps, inspires, gives a cool idea.

  or you learn something new, click on the Thumbs Up on this Post.

  Fixed / responded? Click on the accept as Solution to help others find answers.

• Print on both sides, Deskjet 2050 all-in-One J510a

  Hello

  I have a Deskjet 2050 All - in - One J510a and I just realized that I can't manually print on both sides simply because this function does not exist on the print menu in the Properties window.

  So, how can I print on both sides?

  Thank you

  Gil

  So I guess I should be a REP from HP because these guys are not answering the question? If you go under Printer Properties Advanced there is an option to print only the even or odd, pages print the odd pages first and then put the paper in the printer, go to print click on main pages and bam there you go.

• How can I download my HP Deskjet 2050 All in One series J510 on my netbook without disc

  Is it possible to download my HP Deskjet 2050 All in One J510 printer on my netbook without disk? I really need to print things because my main computer's in the shop. Any help would be greatly appreciated. Thank you. Sincerely, Lisa Horsmon

  Hello

  the software to install your printer can be downloaded here...

  http://h10025.www1.HP.com/ewfrf/wc/pfinder?CC=UK&DLC=en&LC=en&tool=&query=DeskJet+2050

  .. you will need to select model 510, 510 or 510g depending on what model you have.

  Tricky

• 2050 all-in-one is blurred lines and feed new pages in the middle of print job

  Printer HP 2050 all-in-one

  Windows 7 Prof 64

  No recent changes. Printer worked for about 1 year.

  Problem:

  Some lines are unusually short and the letters are crumpled.  Printer is often a page feed for no apparent reason in the middle of a paragraph.  At first, I thought that the rollers of the printer have been problems grabbing the paper, but then I realized that it reproduces errors exactly in the same place for a given document.  Document one might offend lines 4 and 20 and line feed line 40 whenever I print that document B could online on line 4 and scunch line 35 every time I print it.

  I look like a problem of software for sure.  I uninstall the software and reinstall with a new download.  Let me know what happens.

• can not install the software for all in one photosmart 2610xi of disc of windows 7 pc

  I can't install the software for all in one photosmart 2610xi of disc of windows 7 pc.  Goes so far then stops and says cannot use the command "run as".  I am the administrator and logged as such.  I would like to use the software provided with to send faxes and others.  I can use the printer since the buttons on the printer and it prints from all programs... I just wanted to use this software.  Any suggestions?

  Thank you

  Hello

  The installation disk supplied with the printer is not compatible with Windows 7, as the device was manufactured prior to release of Windows 7.
  No matter which compatible OS are registered on the CD...

  A newer version of the software for Windows 7 can be downloaded from the HP site.

  Before installing the software, be sure to follow the steps below:

  1. Enter the control panel > devices and printers.
  2. Right-click on the icon Photosmart 2610 and lick to withdraw an instrument.
  3. Disconnect the USB cable between the printer and restart your PC.
  4. Follow the below installation, do not connect USB until prompted to do so during the installation of the software:
     http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76831-1&cc=us&DLC=en&LC=en&OS=4062&product=421134&sw_lang=

  Kind regards

  Shlomi

• HP Officejet 8500 a e-all-in-one: Officejet 8500 A progressively less black ink prints

  Greetings,

  I have an Officejet 8500 a e-all-in-one, which was a little finiky when it print black ink. It prints well in the morning and for most of the day, but sometimes late in the afternoon, it will print progressively less black ink until it stops completely. When he is left alone during the night, it will start printing without any problems again in the morning. The amount that we will print does not seem to have an effect. It will do the days where we printed almost anything just as often we are printing constantly throughout the day.

  There is a laptop connected via the USB port and two other people who connect via radio. A computer has 10 64 - bit Windows, Windows 64 - bit to 8.1, the last is a macbook. Printing problems are are produced through two connections.

  There is no problems with the ink cartridges, they are brand new and in Full ink levels report.

  The printer has aligned the printheads several times with success.

  I ran to the printhead cleaning several times and it had no effect.

  I took the print heads and cleaned the contacts on the back and in the machine.

  There has been no error on machines or computers.

  At this point I'm not sure if it's a matter of ink clogged or if it is somehow overheating.

  Hi pyrakitt,

  If the steps described in the guide I provided did not resolve your problem, I would certainly consider replace the printhead (s), or the upgrade of the printer. Please Contact HP phone support for assistance. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope that answers your question and have a nice day!

• OfficeJet Pro 8500 All in one – disappear from the HP Solution Center guard

  Background:

  I have two HP all-in-one devices, at the office of one while a 8500 A909a and at home and Officejet 7310 all in one.

  My Dell laptop running Windows 7 Professional 32 Bit.

  I had the laptops and printers for several years, the two were connected through connectiosn fine wired via routers with printing/scanning also up and running by the HP Solution Center.

  If I work in the office and he wanted to scan a document I woul open Solution Center and left two printers would come to the top. I could click on the installed 8500 in the office and it worked fine. Even if I was at home I opened Solution Center, click the 7310 and could very well sweep.

  Problem:

  In recent weeks the 8500 keeps disappearing from the HP Solution Center. He still appears in Control Panel and other applictaiosn of windows like Word and I can print again, BUT not is more visible in the solution Center.

  I load the installation of the driver software (recently downloaded from the website of HP, file name OJP8500vA909_Full_14 (1)) and charging/install the 8500. It takes about 20 minutes to make. The 8500 appears then, but with a suffix like Officejet 8500 (7) after him in the solution Center.

  I can scan then very well but the next day when I start and get to the center of the Solution, it has disappeared again. It's infuriating and wastes a lot of time.

  Please tell us what can I do to load the correct software once and for all for allowing me to use two printers without them disappearing from the solution Center.

  Thanks in advance.

  Hi HPhep42,

  Follow the steps below and let me know what happens?

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  Driver and complete software of HP Officejet Pro features

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  Update Adobe Flash Player

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan?

• I bought Acrobat Standard a year and half ago and lost my disc to install it on my new computer. I lost two hours on the phone trying to get a link to download this product. I have my box with my serial number and all I need is a link to

  I bought Acrobat Standard a year and half ago and lost my disc to install it on my new computer. I lost two hours on the phone trying to get a link to download this product. I have my box with my serial number and all I need is a link to download this product. Can someone help me please?

  Hello

  My apologies for the inconvenience, please use the link below to download Acrobat Standard.

  Download Adobe Acrobat products. Standard, Pro | DC, XI, X

  See also, system requirements | Adobe Acrobat Pro DC, Adobe Acrobat Standard DC

  Kind regards

  Bani

• 8610 printer: I lost the admin password on my printer Hp 8610. Help!

  I lost the admin password on my printer Hp 8610.  Help!

  Hello @bDannyman,

  I understand that you lost the administrator password that have set you up on your HP Officejet Pro 8610 e-all-in-one printer. I would like to help you today with resetting the password on your HP Officejet.

  Unfortunately, the password is in the programming of your printer. Therefore, in order to reset the password for you to use all the features of your machine once again, we have to run a programming semi full reset. This reset will cause your printer to 'think' it starts for the first time again.

  Please check your private Messages for instructions on how to perform semi full reset.

  Good luck!

• How can I reset or fix my router wireless or (lost the ability to connect wirelessly to the internet) access point

  Wireless hub works, other computers are connected

  On a laptop, I lost the ability to connect wirelessly to the internet (message: limited connectivity)

  Recommended by the system solution: reset or repair your access point or wireless router

  How can I do?

  I think that what you aim for is "power cycle".

  To do this, simply unplug the router/access point power adapter. Wait a minute. Then reconnect it.

  Hope this helps

  Post back if necessary

  ___________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.